核心参数
产品类别: 温控探针台
操作类型: 半自动
美国ARS 公司的PS-CC闭循环探针台用于样品的非破坏性检测,测试灵活,广泛应用于直流(DC),射频(RF),MEMS, 纳米电子,超导性,纳米电路的光电特性,量子点和量子线,非破坏性测试等。
该款探针台使用DE204、DE210或DE215系列冷头,整个测试过程中无需使用任何制冷剂(液氦/液氮)。可根据不同测试要求,选用不同型号冷头,以便样品最低温度到达13K、<10K、7K或<4K。所有的ARS闭式循冷头均采用高制冷量的一级冷头,该设计可使系统快速降温并最大程度降低系统热负载。气动驱动GM冷头一级制冷量高,固有振动小,是该领域的理想选择。
该系统为科研工作者提供一个大的、洁净的样品环境。真空腔由焊接不锈钢制成,防热辐射屏由镀镍的无氧铜OFHC制成。镍镀层的低辐射率和无氧铜的高热传导使得样品空间的防热辐射屏温度更低净制冷量更大。高质的真空器件至关重要,可以使样品获得更高的真空环境,更洁净的表面,更好的电接触。
ARS既生产冷头又生产探针台的一站式生产确保了该产品的稳定性能,也利于系统的诊断和服务。
| |
The above picture shows the sample space of the probe station. | The above picture shows a custom sample holder and 4 DC probes. |
特点 | 备注 |
温度范围:7K-400K | |
10英寸不锈钢真空室 | |
8英寸镀镍无氧铜防热辐射屏 | |
2.25英寸镀金无氧铜样品台 | 可升级4英寸样品台 |
高纯石英观察窗 | |
蓝宝石防热辐射屏冷窗 | |
多至6个三维微操作探针臂 | |
可选直流DC/高频RF/微波/光纤探针探针臂 | |
控温系统:高精度4通道控温仪、用于测量样品温度的校准行硅二极管温度计(±12mK)、加热器 | 温度计安装位置: 1、冷头温度计,用于诊断 2、样品台温度计及加热器,用于控制样品台温度,实现精确控温 3、样品温度计,用于精确测量样品温度 4、冷屏温度计及加热器,用于控制加热冷屏温度,实现快速换样 |
三级减振系统样品台综合振动 < 1微米 | 样品台振动 < 100nm |
7:1显微观测系统,3微米分辨率,环形光源 | 可升级16:1显微观察系统 |
规格及技术参数 | |
制冷方式 | 闭循环制冷,无需液氦 |
温度范围 | 7K-400K (可选更高制冷量DE215冷头冷台温度<4K,安装高温隔热台高温度可达800K) |
温度稳定性 | 优于50mK |
泵抽真空时间 | 机械泵约45分钟 分子泵约10分钟 |
降温时间 | 约2到2.5小时(DE204P冷头) |
真空腔 | 不锈钢真空腔 直径10英寸 上盖安装高纯石英窗口 |
防热辐射屏 | 镀镍无氧铜防热辐射屏 直径8英寸 上盖蓝宝石冷窗 热连接至1级冷头 |
样品台 | 镀金无氧铜样品台 2.25英寸直径 |
样品台连接 | 接地(标准) 绝缘(可选) 偏压,通过同轴电缆至外部BNC接头(可选) 偏压到Guard,通过同轴或三同轴电缆连接到外部三同轴接头(可选) |
探针臂位移台 | 手动驱动 不锈钢焊接波纹管连接 X方向(轴向)2英寸行程 Y方向(横向)1英寸行程(标准) 2英寸行程(可选) Z方向(垂直方向)0.5英寸行程 刻度10微米 灵敏度5微米 |
振动 | 三级减振,样品台综合振动优于1微米 |
温度计安装 | 4个温度计,2套加热器 4个温度计位置: 1个DT-670B-SD温度计安装于防热辐射屏用于防热辐射屏的快速升温 1个DT-670B-SD安装于样品台底部用于控温 1个DT-670B-SD安装于冷头位置用于诊断 1个校准型DT-670-CU-4M温度计安装在样品台顶部样品附近,用于精确测温 2套加热器位置: 1套50W筒状加热器安装在样品台底部用于控温 1套100W加热器安装在防热辐射屏上用于系统快速升温 |
显微观测系统 | 标准7:1显微镜 4.2毫米-0.61毫米视野 工作距离:89毫米 数值孔径:0.024-0.08 光源:环形光源 分辨率:3微米 安装手动三维位移台 高分辨率24英寸显示器 可选16:1显微镜 12.8毫米-0.8毫米视野 工作距离:89毫米 数值孔径:0.0090-0.15 光源:环形光源 分辨率:2微米 安装手动三维位移台 高分辨率24英寸显示器 |
探针臂 | |
直流/低频探针臂 | 微型同轴电缆 接头:SMA或BNC 频率:0-100兆赫兹 阻抗:50欧姆 包含接地屏蔽接头 三同轴电缆 接头:三同轴接头 频率:0-100兆赫兹 阻抗:50欧姆 卡尔文探针 电缆:同轴或三同轴 接头:SMA/BNC/三同轴 频率:0-100兆赫兹 针尖材料: 钨针(标准) 镀金钨针(可选) 铍铜镀金(可选) 针尖半径: 0.5微米(其他半径可选) |
GSG高频探针臂 | 0-40GHz 接头:K型接头 电缆:半刚性同轴电缆 针尖:钨针或铍铜针尖 0-50GHz 接头:2.4 电缆:半刚性同轴电缆 针尖:钨针或铍铜针尖 0-67GHz 接头:1.85 电缆:半刚性同轴电缆 针尖:钨针或铍铜针尖 |
光纤探针臂 | 紫外/可见 或 可见/红外 接头:SMA905公头 光纤样品端:抛光裸头 尺寸:100微米-400微米 单模或多模 |
用户单位
采购时间
采购数量
清华大学
2017/05/18
1
香港中文大学
2015/06/09
1
中科院物理所
2017/10/18
1
中科院物理所
2015/03/04
1
中科院理化所
2015/07/02
1
云南大学
2013/08/09
1
华南理工大学
2019/02/08
1
北京理工大学
2016/04/14
1
复旦大学
2018/03/08
1
复旦大学
2017/07/05
1
北京大学
2019/01/16
1
北京大学
2017/02/07
1
北京大学
2014/09/25
1
中科院合肥物质科学研究院
2017/11/09
1
中科院合肥物质科学研究院
2015/08/06
1
中国科学技术大学
2017/04/26
1
中国科学技术大学
2013/03/22
1
浙江大学
2015/02/10
1
上海交通大学
2018/05/17
1
上海大学
2015/07/01
1
ARS探针台PSF-10-4的工作原理介绍
探针台PSF-10-4的使用方法?
ARSPSF-10-4多少钱一台?
探针台PSF-10-4可以检测什么?
探针台PSF-10-4使用的注意事项?
ARSPSF-10-4的说明书有吗?
ARS探针台PSF-10-4的操作规程有吗?
ARS探针台PSF-10-4报价含票含运吗?
ARSPSF-10-4有现货吗?
更多
更多
In Situ X‑Ray Diffraction Study on Hydrate Formation at Low Temperature in a High Vacuum
The condition for incorporating simple gases with H 2 O to form clathrate hydrates in protosolar nebula is a subject of topical interest. Methane and carbon dioxide clathrate hydrates have been speculated to exist in outer solar system bodies, but they have eluded direct detection so far. We have constructed a low-temperature and high-vacuum system to prepare and study clathrate hydrates by in situ synchrotron X-ray diffraction experiments.Upon heating, we found clathrate hydrates can be obtained from the codeposition of methane or carbon dioxide with water outside the equilibrium thermodynamic stability region under high vacuum. We suggested that the hydrate formation is assisted by the phase transformations in the ice, which provide the necessary activation energy to increase the mobility of the guest and water molecules. The results provide a new perspective on how “metastable” gas hydrate can be formed.
7251KB
2021/12/14
TMI Introducing CCS sensors
A CCS sensor is predominately a carbon ceramic amalgam housed in a hermetically sealed ceramic coating. These resistors were originally developed as electronic components which would survive high radiation fluxes (they are able to withstand neutron radiation in excess of 1017N/cm2)
130KB
2021/11/03
Model SI-435 Silicon Diode Temperature Sensors
Si-435 Silicon Diodes from Scientific Instruments offer the industry’s highest 4K accuracy in an interchangeable/uncalibrated diode temperature sensor. The CAP package is the smallest encapsulated diode mount on the market while the SMD package offers the utility of a compact surface mount. Individually calibrated options are available where millikelvin accuracy is required.
913KB
2021/06/24
VIS-Datasheet-V25-850M-module
High-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Multi mode and single mode VCSEL versions are available.
423KB
2021/02/03
VIS-Datasheet-D30-850M
These high speed photodetector modules consist of a GaAs pin photodetector integrated with a 50 µm-core diameter multimode fiber for optical input. The responsivity is greater than 0.4 A/W at 850 nm. The modules are engineering samples and use an optional external DC bias
377KB
2021/02/03
VIS-Datasheet-A56-230C_v1-1
The A56-230 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 200 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.
3120KB
2021/02/03
Product-Catalog-2021
VI Systems GmbH (VIS) is a developer and manufacturer of optoelectronic components for optical communication, consumer and automotive applications. In the field of optical communications VIS offers optical components, such as vertical cavity surface-emitting lasers (VCSELs) and PIN photodiodes capable of up to 224 Gbps per channel and beyond. VIS VCSEL driver and PIN amplifier integrated circuits operate up to 56 Gbps with NRZ modulation. The latest generation of VCSEL and PIN photodiodes allow 400 Gbps PAM-4 energy efficient data transmission over one fiber with four channel short wave division multiplexing (SWDM) at 850 / 880 / 910 and 940 nm wavelength.
1486KB
2021/02/03
Model SD-6-15 Storage Dewar Magnet System
Model SD-6-15 Storage Dewar Magnet System • 6 Tesla magnet with vertical access • Low-loss liquid helium storage dewar • 4K sample insert
198KB
2021/02/03
STT - shaft twist tester Flyer English
STT – Shaft Twist Tester Production-related optical twist testing on radial shaft sealings To avoid leakage on radial shaft sealings the sealing surface has to be manufactured without twist. Optical diffraction analysis can visualize twist structures with amplitudes far below the amplitude of the surface roughness. Applying this method, the quality control can be realized quickly and reliable within the production process. Testing times of a few seconds are making the device applicable in many cases, for example at the reception control, for optimization of the manufacturing process and even for the 100%-control in the serial production.
695KB
2020/11/27
magview Flyer English
The magview is a magneto-optical device for the fast and accurate visualization of magnetic structures. As a handheld device, the system can be applied for qualitative tests and stray field analyses. The magview visualizes magnetic stray fields, for instance of magnetic stripe cards, magnetic encoders and multi pole magnets.
456KB
2020/11/27
mageye Flyer English
The mageye is a digital microscope camera system with an integrated magneto-optical sensor tip for the fast and reliable visualization of magnetic stray field structures. The portable system, including a comprehensive user software allows realtime stray field analyses and quality tests of magnetic materials. It is possible to visualize magnetic stray fields of magnetic stripe cards, magnetic tapes, magnetic encoders, obliterated serial numbers, magnetic ink as well as di- and multipole magnets.
526KB
2020/11/27
3MTS Flyer English
3MTS is the USB handheld Teslameter developed in cooperation with Matesys’ partner company SENIS AG.
904KB
2020/11/27
Thermocouple Feedthroughs
Type-K — Offers broadest temperature range (-200°C to +1250°C), and is the most widely used thermocouple type. For these reasons Accu-Glass supports Type-K with feedthroughs having Chromel® and Alumel® pins and mating contacts for maximum accuracy. Matched pin material for Type-T, J, E, S, R and C thermocouple are not available. Use of standard instrumentation feedthroughs with gold-plated nickel-iron alloy pins, and goldplated copper alloy contacts are offered instead. The error introduced using these pins and contacts is less than 2%. Cable Assemblies — Air side and UHV cable assemblies for all thermocouple types. Refer to specific cables for construction details.
1864KB
2020/07/01
Breaks Fluid Feedthroughs
Vacuum Breaks — excellent voltage isolation in both UHV and HV environments.Constructed using high purity alumina ceramic sealed to stainless sleeve adapters. Water, Fluid Breaks — voltage isolation in water or coolant fluid lines. Soldering or brazing requires low temperatures below 700°C. Standard adapters fit 1/4 to 1/2 Inch diameter tubes. Cryogenic, Fluid Breaks — great voltage isolation for cryogenic fluid lines. Designed to be TIG welded into cryogenic fluid transmission lines with 1/8 to 3/8 Inch diameters.Allows safe operation to –200°C.
2068KB
2020/07/01
DS-PSW-10-4
This model of the ARS Probe Station is designed for the ultimate in flexibility for non-destructive device testing. The ability to upgrade and modify this system for further device testing has been in the forefront of this design.
1073KB
2019/11/05
DS-PSF-10-4
This model of the ARS Probe Station is designed for the ultimate in flexibility for non-destructive device testing. The ability to upgrade and modify this system for further device testing has been in the forefront of this design.
1339KB
2019/11/05
DS-PS-NS-10-4
Ultra‐Low Vibrations (< 50 nm) Microwave properties DC, RF properties MEMS Nanscale electronics Superconductivity Electrical and optical properties of nano‐devices Quantum dots and nanowires Single electron, and low current physics
1586KB
2019/11/05
用于MEMs和NEMs研究的超高真空低温探针台
ARS 生产制造的高精度的低温探针台,电学测试频率可达67GHz 和并可进行各类光学测量。 超低振动的样品环境和宽量程变温范围使其特别适合研究MEMs 器件、量子材料、超导纳米线、半导体等。
249KB
2019/10/17
美国ARS DS-CS210AF-GMX-19N-非光学顶端装载型闭循环低温恒温器
X-19-NO是顶端装载样品的非光学型恒温器,样品置于氦气交换气体腔,使用样品杆更换样品,换样时无需关闭制冷机,这样的设计换样速度快,特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中,适用于各种导热性不好的样品降温。 该系列恒温器尾部可做成非常细小,而且由无磁材料制成,特别适合匹配超导磁体进行磁化率及VSM测试。 X-19-NO系列恒温器可配备DE-202、DE-204或DE-210系列冷头。
1850KB
2019/07/18
美国ARS超稳超低振动型低温探针台
ARS纳米级超稳超低振动型低温探针台的设计具有极大的灵活性,可用于无损器件测试。探针配置和系统设计可以根据您的具体实验要求进行定制。 系统标准温度配置为低温5K,可选450K和800K高温度选项。 探针台采用ARS闭式循环制冷机,ARS制冷机为气动驱动GM制冷机,它具有一级冷台制冷能力高和固有的低振动相结合的特点,使其成为纳米科学和敏感器件测量的理想选择。
1586KB
2019/07/18
美国ARS CS204AE-FMX-1AL标准光学型闭循环低温恒温器
X-1AL系列标准光学型闭循环低温恒温器因其测试灵活,价格经济而成为绝大多数实验室样品及装置测试的最优选择,该系统广泛应用于各种光、电、磁测试。 X-1AL系列恒温器可配备DE-202或DE-204系列冷头,根据客户需要可选择4K,5.5K,10K不同型号。
837KB
2019/07/18
企业名称
天津多为莱博科技有限公司
企业信息已认证
企业类型
信用代码
120104000333871
成立日期
2015-10-29
注册资本
100
经营范围
科学研究和技术服务业;货物及技术的进出口业务;五金产品、电气设备、计算机软硬件及辅助设备、电子产品、文具、体育用品、日用百货、实验室设备及耗材(危险品、易燃易爆易制毒品除外)、办公用品、仪器仪表、金属制品、机电设备批发兼零售;仪器仪表、计算机及辅助设备维修。(依法须经批准的项目,经相关部门批准后方可开展经营活动)
天津多为莱博科技有限公司
公司地址
天津市津南区联东U谷总部大观5-2623
客服电话