美国ARS液氦型FTIR连续流恒温器-LT4-FTIR

TMI CCS Carbon Ceramic Sensor™ Type D

CCS sensors are the latest development of TVO resistors with a carbon ceramic composite construction which exhibit a single resistance verses temperature curve. CCS sensors are available calibrated or uncalibrated and offer exceptionally fast response times, excellent repeatability and long term stability, extremely robust and resistant to the harshest environments including magnetic fields and high dose radiation

Model SI-435 Silicon Diode Temperature Sensors

Si-435 Silicon Diodes from Scientific Instruments offer the industry’s highest 4K accuracy in an interchangeable/uncalibrated diode temperature sensor. The CAP package is the smallest encapsulated diode mount on the market while the SMD package offers the utility of a compact surface mount. Individually calibrated options are available where millikelvin accuracy is required.

Model SI-415 Silicon Diode Temperature Sensors

The Scientific Instruments Model Si-415 Silicon Temperature Sensors operate over a wide temperature range and are miniature in size. They are linear over a wide temperature range interval, and have high sensitivity in their lower range. The silicon diode temperature sensors are interchangeable to a standard V/T curve.

VIS-Datasheet-VM100-850M-module

Ultrahigh-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Bitrates beyond 100G have been demonstrated with high order modulations: 4-PAM [1], DMT [2] and multi-CAP [3]. Multi mode and single mode VCSEL versions are available.

VIS-Datasheet-V50-850M-module

High-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Multi mode and single mode VCSEL versions are available.

VIS-Datasheet-T56-850TB

The T56-850 transmitter optical subassembly combines an 850nm VCSEL and an optional driver IC integrated on a test board and fiber coupled with a 50/125 µm multimode fiber. The T56-850nm is designed for high speed data communication applications. The device is configured for differential drive and a controlled impedance circuit is available for optimum performance.

VIS-Datasheet-D50-1300M

These high speed photodetector modules consist of an InP pin photodetector integrated with a 50 µm-core diameter multimode fiber for optical input. The responsivity is greater than 0.5 A/W at 980 nm and 0.6 A/W at 1310nm. The modules are engineering samples and use an external DC.

VIS-Datasheet-A50-300C90

The A50-300C90 is a three stage high speed driver IC designed for the use with 50 Gbit/s optical modulated laser in fiber optic transmission systems. The A50-300C90 operates from a single +5 V supply. It features a high voltage drive capability and low power consumption.

helium_level1

The AMI family of liquid helium level instruments offer a wide range of solutions. All instruments pass a constant current through a superconducting Niobium Titanium (NbTi) filament and measure the resistance. The portion of the filament in liquid helium becomes superconducting (i.e. no resistance). The resulting resistance of the wire above the liquid is converted to a level signal. Advanced circuit designs offer our customers many advantages. Years of trouble free service are the result of rugged construction both inside and out. All our instruments and sensors from 1” to 36” are stock items for quick delivery. Our experienced staff offers prompt repair service when needed. OEM instrument design and manufacturing partnerships are always welcomed if our standard products do not meet your needs.

LT4B超高真空液氦液氮型连续流低温恒温器

ARS 生产的Helitran LT4B 是一个真正的超高真空冷头(10-11 Torr)，所有的橡胶O 形密封圈被焊接接头和金属密封圈取代。 LT4B 是性价比最高的制冷剂连续流型UHV 低温恒温器。LT4B 既可以使用液氦也可以使用液氮。LT4 使用标准的传输管线和冷头。如果需要升级为同轴屏蔽流型传输管线，实现埃米级振动，向您推荐高性能的LT3B。

我司在深圳某高校成功进行了美国ARS低温恒温器与奥林巴斯（OLYMPUS）显微镜集成

近日我司在深圳某高校成功进行了美国ARS （ADVANCED RESEARCH SYSTEMS）低温恒温器与奥林巴斯（OLYMPUS）显微镜集成。

STT - shaft twist tester Flyer German

STT – Shaft Twist Tester Fertigungsnahe optische Drallprüfung von Radialwellen-Dichtringsitzen Um eine Undichtheit bei einer Radialwellendichtung zu vermeiden, ist die Dichtungsfläche der Welle drallfrei zu fertigen. Durch die optische Beugung können Drallstrukturen sichtbar gemacht werden, deren Amplituden deutlich unterhalb der Rauheitsamplituden der Dichtfläche liegen. Schnell und zuverlässig kann somit eine Qualitätskontrolle in unmittelbarer Nähe zum Bearbeitungsprozess erfolgen. Mit Prüfzeiten im Sekundenbereich sind die Geräte vielseitig einsetzbar z.B. für die Eingangskontrolle, für die Prozessoptimierung des Herstellungsverfahren oder für die 100% - Kontrolle in der Serienfertigung.

magview Flyer German

Der magview ist ein universell einsetzbares magnetooptisches Auslesegerät zur schnellen und präzisen Visualisierung magnetischer Strukturen. Als mobiles Handgerät kann er zur Qualitätssicherung und Streufeldanalyse eingesetzt werden. Visualisiert werden beispielsweise magnetische Streufelder von Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten.

mageye Flyer German

Das mageye ist ein digitales Mikroskopkamera-System mit magnetooptischer Sensorspitze zur schnellen und präzisen Visualisierung magnetischer Streufelder. Das handliche System, inklusive Anwendungssoftware, erlaubt eine Echtzeitanalyse magnetischer Streufelder und ist beispielsweise für eine mobile Qualitätsprüfung von Schweissnähten bestens geeignet. Visualisiert werden ausserdem Streufelder von Magnetstreifenkarten, Audiobändern, magnetischen Encodern, abgeschliffenen Seriennummern sowie von Dipol- und Multipolmagneten.

Helmholtz Coils Flyer English

One of Matesy’s core competencies is the management of development projects. In cooperation with you, we create a concrete solution, manufacture a system according to your specific needs and support the implementation process.

3MTS Flyer German

3MTS ist ein handliches 3-achsiges Teslameter, welches in Zusammenarbeit von der Matesy GmbH und der SENIS AG in einer Kooperation entwickelt wurde.

Time-DomainThermoreflectance

Time-domain thermoreflectance (TDTR) is one of the most powerful methods to measure the thermal properties, most importantly thermal conductivity, of a wide range of bulk and thin film materials and their interface. The principle is to take advantage of the change in the reflectance of the surface to derive the thermal properties when a material is heated up. The set-up includes a pump and probe pulsed-lasers. The pump laser is utilized to generate acoustic pulses. The acoustic pulses could be at a transmittance or reflectance state at an interface, depending upon the properties of the interface. The probe laser will detect the reflecting acoustic pulses through a photodetector.

Photoluminescence光致发光

光致发光(PL)光谱是一种广泛应用于半导体和分子的光学和电子性质表征的技术。PL 是任何形式的物质在吸收光子后的光发射过程。入射光子在可见区域激发它的一个电子到激发态。然后，当电子返回 到较低能态时，它会辐射一个光子。在量子力学中，能带是量子化的，这意味着只有某些跃迁是允许的。因此，发光的能量峰被认为是不连续的。

Fourier-TransformInfraredSpectroscopy(FTIR)

When a sample is exposed to infrared radiation, the dipole moment will be excited by absorbing the radiation with a specific wavelength. The vibrational energy will be excited from the ground state to the excited state.Unlike dispersive spectroscopy, Fourier-transform infrared spectroscopy (FTIR) contains many frequencies of light at once and measure absorption. Next, the beam contains a different combination of frequencies of light and repeat it. After repeating several times, the raw data will be processed to resulting data cm-1, wavenumber.This process is called the Fourier Transform.

Deep-LevelTransientSpectroscopy(DLTS)

Deep-level transient spectroscopy (DLTS) is a very powerful tool to detect the defect concentration and thermal emission rate of semiconductor deep levels by measuring capacitance transients as a function of temperature. It normally used the Schottky diode or p-n junction as a probe. In the process, the probe is forward biased to fill the defects with free carriers by a pulse voltage. After the pulse, the defects start emitting trapped carriers due to thermal emission.

Parahydrogen

Parahydrogen is one of two magnetic forms of hydrogen gas (H2). It’s commonly used to increase the sensitivity of NMR and MRI measurements. Molecular hydrogen consists of two atoms. Each of the atoms has a spinning nucleus. Based on the direction of the nuclear spin, there are two types of hydrogens. If the spins of the two hydrogen nuclei are aligned, it’s orthohydrogen. If the spins are opposed, it’s parahydrogen.In general, hydrogens is an equilibrium mixture of ortho- and para-hydrogen. There is a tiny energy difference between the two magnetic states.

NobleGasAnalysis

The noble gases, i.e., helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), form a group of chemical elements with similar properties, such as odorless, colorless, and monatomic. Most importantly, they are chemically unreactive. Therefore, they are also called inert gases. Because of its chemically and biologically inert and unique isotopic features resulting from radioactive decay, the noble gases are commonly utilized to probe the ocean and Earth process, e.g., rocks and minerals dating. High-purity and quantitative noble gas sample preparation for mass spectrometric analysis are normally required. Therefore, adsorption of noble gases in an ultra-high vacuum activated charcoal trap at cryogenic temperatures is the most common procedure. The desorption of individual noble gas is a function of temperature for mass spectrometric measurements.

X-rayDiffractionX射线衍射

x 射线衍射(XRD)是一种基于布拉格衍射来测定晶体原子和分子结构的技术。x 射线通常被用来产生衍射图样，因为它们的波长通常与晶体中平面间距d 的数量级相同(1100 埃)。 衍射x 射线的强度和角度可以产生晶体内电子密度的三维图像，从而得到原子的平均位置以及化学键、紊乱和其他信息。 如果是单晶样品，通常安装在测角仪上，测角仪可以将样品定位在选定的方向上。低温XRD 的优点是降低了辐射损伤和热运动。 低温XRD 也有助于表征超导体材料。

Linear Rotary Feedthroughs

Precision Linear Feedthroughs — Welded bellows shaft seal with 1, 2 and 4 Inch linear travel lengths. Precision Rotary Feedthroughs — Welded bellows shaft seal with 360° plus, continuous rotational travel. Economy Rotary Feedthroughs — Elastomer shaft seal with 360° continuous manual rotational travel. Actuator Options — DC Stepper, AC motorized, and pneumatic actuator options available.

Pressure Relief Busrtdisc

Low Pressure Burst Discs — One-Time-Use, 9~11.5 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. High Pressure Burst Discs — One-Time-Use, 15~25 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. PRV TM Pressure Relief Valves — Adjustable and reusable, 0.5~2 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings.

Fiber Optic Feedthroughs

Fiber Optic Feedthroughs — UHV rated feedthroughs available in six core sizes from 62.5μm to 1000μm. UHV Fiber Patch Cable Assemblies — Polyimide buffered fiber patch cables available in six core sizes from 62.5μm to 1000μm. Air-service Patch Cable Assemblies — Polyimide buffered fiber with PVC jacketing available in six core sizes from 62.5μm to 1000μm. Accessories — Couplers, adapters, connectors, jacketing and wrap, polishing supplies and consumables. Multimode Fiber has a large core diameter, and is commonly used in short-run cable distances such as vacuum applications. Custom fiber cable assemblies available on request. Standard flange sizes are 1.33 and 2.75 Inch CF, ISO NW16 and 40 KF. Custom flange sizes available on request.

我司在深圳某高校成功安装美国ARS显微拉曼用超稳型低温恒温器

X-20-OM超低振动超精细闭循环恒温器是特别为光学显微实验设计，如显微-光致发光(Micro-PL)，显微拉曼等。 X-20-OM系列恒温器使用氦气交换冷却样品，系统振动级别仅为3-5nm,样品处最低温度可达3.5K，最高温度可达800K。

LT4-FTIR

LT4-FTIR系列连续流恒温器是性价比高的FTIR连续流恒温器，专门用于FTIR低温测试。 LT4-FTIR既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。

LTR

LTR专为X波段EPR和ESR测量而设计。 通过石英比色皿内的液氦射流冷却样品。 我们提供符合Bruker、Varian和JEOL腔体的玻璃器皿。

X-19-NO非光学低温恒温器

X-19-NO是顶端装载样品的非光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。

LT3B-OM UHV显微型连续流低温恒温器

LT3B-OM 恒温器专为UHV 显微拉曼设计，可烘烤至150℃，所有法兰通用铜片密封。也适用于其它各类低振动要求的光学显微实验。窗口专为科学实验而设计，可现场更换。

ds.LTR

Standard Features: • Glassware to fit into the Bruker cavity. Varian and JEOL are also available. • Bruker cavity adapter • Mounting arrangement for the Bruker magnet. • Sample space is in the sample rec eiver. • Transfer Line has Braided Stainless Steel casing over bellows for durability. • Flowmeter Panel for Helium flow control and optimization. Flow settings can be repeated precisely for standard experiments with multiple operators. • Dewar Adapter with pressure relief valves to ensure safety of system during pressurization of the dewar and to protect the transfer line from stresses.

ds.cs202-x2

Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

ds.cc210+215

Advanced Research Systems, Inc manufactures its own series of Closed Cycle Cryocoolers. They are pneumatically driven GM Cryocoolers (pGM), that are offered as both single and two-stage units.

ds.cc202

The ARS Pneumatic Drive Cryocooler is a two component closed cycle system operating in the temperature range 3K to 300K. It has no mechanical drive linkages making it very low maintenance and reliable. The displacer motion is controlled by the differential gas pressure, this results in low vibrations at the second stage of the cryocooler.

DS-Helifier

The Helifier provides an economical way to recover helium exhaust from laboratory cryostats and liquefy it for continued use. Cooled by the powerful ARS CS215S cryocooler the Helifier will generate liquid helium at a rate of 18L/day and store up 100 liters of liquid which is roughly a weeks worth of normal helium usage for cryostat applica-tions.

DS-superconducting-magnet-probe-station

The ARS Closed Cycle Superconducting Magnet probe station model is designed for the ultimate in flexibility for non-destructive device testing. This system enhanced with a 3T Vertical superconducting Magnetic Field. Those systems are ideal for the study of magneto-optical and magneto-electrical properties in variety of experiments, including quan-tum dots, spintronic devices and nanoscale electronics. The probe con-figuration and system design can be customized to suit your specific experimental requirements.

DS-CS202AF-DMX-20B

The CS202*F-DMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE202*F-DMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE202 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling capacity is roughly cut in half at varying temperatures.

μdrift彩页

温度范围： 4K-500K 防热辐射屏安装有冷窗，更好的保证最低 温时的温度稳定。 振动： 3-5nm 峰-峰振动 @2.4Hz <1nm 更高频率

uDriftmicroscopycryostat

High Performance ULVD Cryostat will feature: •Ultra Low Vibrations. •Ultra Low Drift in XY. Wide temperature range. •Ultra Low Drift in Z axis. Wide temperature range. •UHV compatible materials. •UHV design. Stainless body. •Piezo positioners, XYZ. Available as options •Large breadboard capability. •Cold objective in sample chamber for Near Field Optical Experiments. •Side and top mounted optical windows. •Low noise wiring. •RF and DC •Monolithic frame for easy installation.

DS-CS202AE-DMX-1AL

The CS202*E-DMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system is well suited for optical, electrical, and magnetic sample testing.

用于MEMs和NEMs研究的超高真空低温探针台

ARS 生产制造的高精度的低温探针台，电学测试频率可达67GHz 和并可进行各类光学测量。 超低振动的样品环境和宽量程变温范围使其特别适合研究MEMs 器件、量子材料、超导纳米线、半导体等。

探索奇妙的液氮深冷世界

为您提供全线液氮冻存解决方案，卓越的保温性能、超低的运行成本和完善的控制功能让您放心储存珍贵的生物样品。

NEWT Overview

As a leading producer of high-quality braided products, New England Wire Technologies designs and manufactures flat-wire braiding, braid-reinforced tubing, scope braids and insulated braids. Our products are used for applications such as ground strap, motor brush leads, circuit breaker shunts, flexible bus bar, RFI/EMI shielding and shielding for mechanical protection of single or multi-conductor cables. We also create flexible cables and strands for use as flexible conductors in custom single and multiconductor insulated cables.

美国GMW-hw-105a_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-102a_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-101a-4t_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-101a_gmw

HW-101A Shipped in packet-tape reel(3,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue

美国GMW-hq-8220_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0715

HG-0715 HG-0715は、超小型SON形状GaAsホール素子です。 標準はテーピングリール供給です。（10,000pcs.／Reel） 注意： 弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読みください。

美国GMW-hg-302c_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-166a_gmw

AKEMD assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of any information contained herein.

美国GMW-hg-116a_e

Handling precautions required for preventing electrostatic discharge

美国GMW-hg-106c_gmw

These products and their specifications are subject to change without notice.When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei EMD Corporation (AKEMD) or authorized distributors as to current status of the products.

美国GMW-AN_161

The AN_161KIT series of kits are PCB assemblies which provide an easy means to evaluate the Asahi Hall elements for magnetic field, electric current or position sensing applications. These kits can be used independently by themselves or with the GMW AN_160KIT, Universal Hall Interface Module (UHIM). There are two basic connection schemes depending on the kit part number as shown below. See the AN_160KIT specification sheet for details on the use of these kits with the UHIM.

美国GMW-AKM-RoHS_Statement

The Current Sensor Modules use a Hybrid Hall IC, which includes: a high sensitivity Hall element, an amplifier, a buffer, compensation circuitry, and a drive circuit for the Hall sensor. CQ206x and CQ209x Series also include an EEPROM unit providing factory-adjusted sensitivity and offset voltage for high accuracy. The compensation circuitry provides flat temperature dependence. The current conductor is electrically isolated from the sensor IC. The output is linear and ratiometric to the supply voltage.

VWM-S-1W-A60mm-TopView

VWM-S-1W-A60mm-TopView VWM-S-1W-A60mm-TopView VWM-S-1W-A60mm-TopView

VWM-S-1W-A60mm-RightView

VWM-S-1W-A60mm-RightView VWM-S-1W-A60mm-RightView VWM-S-1W-A60mm-RightView

VWM-S-1W-A5mm-RightView

VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView

VWM-Demo-readout-program

Vibrating Wire Monitor Demo readout program GUI User's Guide

vwmdatasheet

Beam transverse profile and position Beam Halo measurement

vishay_foil_resistor

Bulk Metal® Foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability.

VIBRATING-WIRE-SCANNER-FOR

Method of beam transverse profile measurement in accelerators by scanning wire is wide-spread in accelerator technology [1-6]. In this work vibrating wire is proposed to use as a scanning wire. In such way the system of radiation (or secondary particles) extraction and measurement can be removed. Dependence of oscillations frequency on beam scattering is determined by several factors. Our estimations show that influence caused by wire heating will dominate.

VAC-DS-4644-X052

500 A - Stromsensor Modul / Current Sensor Module (Molex Connector)

transverse-mag-probes-C-and-E

Transverse Mag Probes type C (0.2mT) and type E (2.0mT)

THM1176-MF-and-HF-Sensor-Head-Dimensions

THM1176-MF AND THM1176-HF SENSOR HEAD DIMENSIONS – REV. B

THM1176-LabviewRTE-Error

Why am I getting this error: “Unable to locate LabVIEW Runtime” ? This error typically is caused by the LabVIEW runtime engine and VISA runtime engine not installed or not correct version installed. When you saw the error there should have mention what version of runtime engine was missing.

The-Parametric-Current-Transformer-A-Beam-Current-Monitor-Developed-for-LEP

Toroidal transformers are used to measure the beam current in beam lines and accelerators. Placing such a transformer hi the feedback loop of an operational amplifier will increase the useful frequency range (active current transformer). A magnetic modulator can be added to extend the response to DC current, maintaining with a control loop the transformer core at a zero flux state.

Tech-Note-Current-Transducer-Cable

Tech Note: Current Transducers “Wrap Around” or Distributed Primary Current Cable

Technical-information-of-LM-series

HTS-110’s LM series will provide a maximum field of 1-3T at the centre of the Ø40-80mm room temperature bores. LM series are cryogen-free and are cooled by means of a cryocooler with an associated compressor.

stulle_inpac2018

The CWCT is a novel instrument developed for the accurate determination of the CW beam average current. It measures average beam currents down to the microampere level with noise contributions below 1 μA. Its output signal follows beam current fluctuations within ≤1 μs, permitting fast detection of beam loss. These characteristics render the CWCT an ideal instrument for proton and ion accelerators. We present the CWCT principle and laboratory measurements using various input signals.

Spacemag_Lite_OM3777

Operation Manual for Spacemag-Lite Three-Axis Magnetic Field Sensor

SOR-MAN-DLM600

AMETEK Programmable Power, Inc., a Division of AMETEK, Inc., is a global leader in the design and manufacture of precision, programmable power supplies for R&D, test and measurement, process control, power bus simulation and power conditioning applications across diverse industrial segments. From bench top supplies to rack-mounted industrial power subsystems, AMETEK Programmable Power is the proud manufacturer of Elgar, Sorensen, California Instruments and Power Ten brand power supplies.

SN-DS-i1a-magnetic-transducer

The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By).

Shape-E-BNC

CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR

Shafer-BPM

The purpose of this paper is to review the topic of beam position monitoring as it applies to charged-particle beams in accelerators and beamlines.

SENIS-CS_Spec

The SENIS CS series current sensors offer low current sensing with high voltage isolation capability. The SENIS CS sensor incorporates the Melexis MLX91206 high sensitivity Hall IC and a multi-turn coil to further increase sensitivity.

SCU1-OM2441

Operation Manual for SCU1 Signal Conditioning Unit

S-BPM-manual

Non-interceptive beam position measurement For linacs, microtrons and transfer lines Single bunch, macropulse and CW Beam charge range > 1000

RD102-EM3242

The RD102-EM3242 is a reference design for the AKM EM-3242 Non-Contact Angle Position Sensing IC. The EM-3242 senses the angle of magnetic field component in the top plane of the device package. The EM-3242 provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The EM-3242 has two operating modes. One with the “In Range” detector enabled and one with the “In Range” detector disabled. The “In Range” detector includes internal circuitry which causes the output voltage to drop to 0V whenever the magnetic field level at the EM-3242 is greater than 60mT or less than 10mT.

RCTrms3ph

The RCTrms-3ph is a 3-Channel ac current transducer for permanent installation. Simple to install and easy to retrofit it combines the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of ac current.

RCTi-Technical-notes

All measuring instruments are subject to limitations. The purpose of these technical notes is to explain some of those limitations and to help the engineer maximise the many advantages of PEM’s Rogowski current transducers. These technical notes should be read in conjunction with the RCTi and RCTi-3ph short-form datasheets.

RCTi3ph

The RCTi is a current transducer for permanent installation. Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around. The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

RCT1A-INS

The RCT1A is a flexible, clip-around current transducer for measuring ac currents.The RCT1A is a direct replacement for metering class current transformers with a 0 to 1A output, combining safety and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

RCT1A-Dimensions

RCT1A-Dimensions RCT1A-Dimensions RCT1A-Dimensions

RCT1a

The RCT1A is a genuine Current Transformer (CT) replacement but hasall the intrinsic benefits of a thin, light-weight, flexible, clip-around Rogowski(sense) coil. Just like a CT the RCT1A secondary output is an industrystandard 0 to 1A (5VA pf 1) instantaneous current proportional to themeasured primary current.

PPM-DS-p2p-PowerSleeve

The PowerSleeve has been developed by PPM to allow the complete range of AC and DC point2point fibre optic plug in modules to be battery powered. Now users have the ability to take standard transmit or receive modules and fit it into the PowerSleeve instead of relying on mains power. This option is particularly important when locating point2point modules in remote locations that have limited access, where galvanic isolation is required or where no mains power supply is present.

PPM-DS-p2p-ACLink

The AC point2point link is capable of transmitting analogue signals of up to 3GHz over singlemode fibre. The capability to transmit any type of low level RF signal within this pass band makes it ideal for EMC measurements, HPM experiments or distributed timing. The modules are available in a fully EM shielded casings, or as a plug-in module for use with the various point2point housings.

PPM-Chart-square_18V_1M_250

Step response to a 1MHz square wave on the point2point 40MHz link.

OM1938-Magnetic-Shield

Operation Manual for TLMS-O100 Open-End Magnetic Shield TLMS-C100 Capped-End Magnetic Shield

NPCT-CF6-96-120-w

NPCT-CF6"-96.0-120/1.0 NPCT-CF6"-96.0-120/1.0 NPCT-CF6"-96.0-120/1.0

MX-BPM.manual

Multiplexed Beam Position Monitor User’s Manual Multiplexed Beam Position Monitor User’s Manual

MS2-MS2WFP-RS232-Cable-DR1042

MS2-MSWFP CABLE RS232 2M ASSEMBLY MS2-MSWFP CABLE RS232 2M ASSEMBLY

MS2C-DR0642

MS2C-DR0642 MS2C-DR0642 MS2C-DR0642 MS2C-DR0642 MS2C-DR0642

MS2B-DR0305

MS2B-DR0305 MS2B-DR0305 MS2B-DR0305 MS2B-DR0305 MS2B-DR0305

Model-5452-Field-Uniformity

Model-5452-Field-Uniformity Model 5452 Field Uniformity, I = 3.5A

ML_DS_pt2025

An everyday tool for rapid, automatic and highly accurate measurements of magnetic fields: research, magnet manufacturing and testing, standards and calibration.

Miniature-Probes-DS3939

Mag612 & Mag619 Miniature Three-Axis Fluxgate Probes

MFCToolV10-Users-Manual

MFCTool V10 Magnetic Field Camera Software User's Manual

Matesy-DS-MiniMo

Being a small and light testing device, Minimo can be used as a stationary and mobile system for fast visualization of magnetic stray fields. The webcam-based Minimo is applicable for a qualitative examination of magnetic stripe cards, removed serial numbers and hard magnetic material structures. In addition to plug-and-play ability and image archiving a simple change of the magneto-optical sensor head is possible. Minimo can be equipped with all types of magneto-optical sensors. This allows an adaption of the Minimo to the sample field strength.

Mag690-OM2604

Operation Manual for Mag690 Three-Axis Fluxgate Magnetometer

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor is ideal for integration into large component systems where high performance is essential. It is also suitable for use in projects requiring large numbers of sensors where unit cost is critical.

Mag690-DR2687

Mag690-DR2687 Mag690 Outline Drawing Mag690 Outline Drawing

Mag670-DS2497

Mag670-DS2497 Mag670 Low Cost Single Axis Magnetic Field Sensor

ew-500_gmw

EW-500 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-450_gmw

EW-450 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-402_gmw

EW-402 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EQ-732L_MS-1380-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 40mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 3mVp-p

eq-432l_e

EQ-432L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-1791_gmw

EM-1791 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DTM-130-141

Fully configurable dedicated 6-channel system interface unit for ultra-stable, high pre-cision fluxgate technology DS series current transducers.Powers up to 6 x DS50 to DS2000 at the same time.Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V)

DS10000IBFS

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 11000A

DS200UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 220A

DR1395

DR1395 MS2 magnetic susceptibility meter MS2 magnetic susceptibility meter

DR1255

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0756

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0656

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DL2000ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

Danisense-Product-Name-Guide

Danisense-Product-Name-Guide PRODUCT NAMING RULES

CZ-3706

CZ-3706 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3701

CZ-3701 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWTUM-Dimensions

Positional accuracy and external currents Due to small variations in the winding density and coil cross sectional area the transducer output varies slightly depending on the position of the current in the coil and also the size of the current conductor relative to the coil.

CWT-Ultra-mini

The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

CWTMini50HF_Datasheet

Introducing the NEW CWTMini50HF,an extension of the CWTMiniHF range for even faster transient current measurement

CWT-Mini_MiniHF

New model featuring • A novel electrostatic shielded Rogowski coil providing excellent immunity to interference from fast local dV/dt transients or large 50/60Hz voltages • Extended (-3dB) high frequency bandwidth 30MHz for a 100mm coil • Peak di/dt capability up to 100kA/μs • Wide operating temperature from -40oC to +125oC • 4.5mm thick Rogowski coil with 5kV peak insulation.

cwtlf

PEM?s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer

CWT_UM-instructions

ROGOWSKI CURRENT WAVEFORM TRANSDUCERS INSTRUCTIONS FOR USE CWT ULTRA MINI

CWT_MINI-instructions

PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

CWT_Mini50HF

Introducing the NEW CWTMini50HF, an extension of the CWTMiniHF range for even faster transient current measurement

CWT_Fuse_Replace_Instructions_GMW

Instructions for CWT Integrator Module Fuse Replacement

CU1-Control-Unit-OM3224

Operation Manual for CU1 Helmholtz Coil System Control Unit

CT-07.08.App_.note

Bergoz Instrumentation Current Transformers have been employed in an interesting application to detect faults in the electricity supply lines in Southern Africa. ABB successfully installed Bergoz CTs recently and the system described below is now operational in the field.

CSA-1VG-RoHS

Features: • Sensitive to a magnetic field parallel to the chip surface • Very high sensitivity • Linear output voltage proportional to a magnetic field • Wide-band: DC to 100kHz • Very low offset and offset-drift • Very low noise • Isolated from current conductor • Surface mount SOIC-8 package

CQ-3301

CQ-3301 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ-2366

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2335

CQ-2335 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2332

CQ-2332 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2332

CQ-2332 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2235

CQ-2235 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CATALOG_AKM-Kit-and-Ref-Catalog

AKM Magnetic Sensors Engineering Development Kits Demonstration Modules Application Case Studies

BSS-02B section through coil & nose cone

BSS-02B section through coil & nose cone BSS-02B section through coil & nose cone

BCM-IHR-manual

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BB-BPM.manual-2.3

BB-BPM.manual-2.3 Baseband Beam Position Monitor User’s Manual

Bartsoft-PC-OM2647

Bartsoft software acquires, corrects, displays, stores and prints data using Bartington Instruments MS2 and MS3 meters. This guide explains how to use the software and helps the user understand how it works, including the function of all controls and windows.

Bartington-Export-Control

Bartington Instruments manufactures a range of Fluxgate magnetometers and acquisition units, magnetic susceptibility systems, and a range of test equipment. Some of these products are subject to export control. The summary below is provided to give an overview of the rules that apply.

axial-mag-probes-B-and-D

Axial Mag Probes type B (0.2mT) and type D (2.0mT)

AN0015-Magnetic-Susceptibility-Measurements-Using-the-MS2-MS3-System

Magnetic Susceptibility Measurements Using the MS2/MS3 System

AN014_p2p_Dynamic_Range_3407

PPM offer a range of AC coupled point2point Fibre-Optic-Links. The noise and linearity performance of these links is specified in the relevant data sheets. This application note explains the definition of these terms, and the calculations that may be used to determine additional performance parameters that may be of use in a particular application.

AN0009-Magnetic-suceptibility-in-archaeological-prospecting

Sensitive magnetometers have been used for many years for locating and planning archaeological sites. Originally developed in the 1950s for detecting pottery kilns by the thermoremanent magnetism of their baked clay construction, magnetometers were immediately found to respond also to ancient pits and ditches backfilled with topsoil.

AN_BBM-01

This AN_BBM-01 provides guidance in sizing bus bars to obtain the desired BBM-01 Bus Bar Module sensitivity for DC currents. The BBM-01 determines the current in the bus bar by measuring on both sides of the bus bar, the magnetic field generated from the current through the bus bar. The magnitude of the magnetic field at the sensor is a function of the width and thickness of the bus bar as well as the current through the bus bar. This guide provides the output Sensitivity in mV/A for the BBM-01 as a function of bus bar width and thicknesses for various standard Imperial dimensioned bus bars.

AN_181-CPCO-Cable-Options

The AKM EM-3242 Non-Contact Angle Position Sensing IC is a very small, low cost and easy to use angle position sensor with a continuous 360 degree range. The EM-3242 provides an absolute position output which means the power can be removed then reapplied and the output will continue to have the correct angle even if the rotating magnet moved while the power was off. The device requires very little power and operates at 3V+/-10%. The EM-3242 senses the angle of magnetic field component that is parallel to the plane of the device package and provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation.The device includes a power down ( PDN ) function which reduces the current draw to less than 10uA.

AKM-RoHS_Statement

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

AK8788-04APR2012

Features ?High sensitive omnipoler operation ?Micropower operation 　Typ.4.5μA (average : VDD=1.85V) ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

AK8779A

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8778B_MS1466-E-00_120906-GMW

The AK8778B is a Hall effect latch which detects both “vertical magnetic field” and “horizontal magnetic field” (perpendicular and parallel to the marking side of the package) at the same time. The pulse output F and direction output D are switched according to the vertical and horizontal magnetic fields applied to the device. The direction is calculated internally and output D is switched at a rising or falling edge of output F. The AK8778B is for use in the incremental pulse encoders or rotational detection systems.

ACCT-shielding

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-245-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-198-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-178

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-175-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-016

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-E-RM-3R-manual

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

11901290-3470-Probe-Mount-Assembly

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11900211_A

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2236-0-Outline

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2212-1-Xm-Specification

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2211-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2153-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11907-0355-0_S3_C_3480_General_Assembly

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480OG_Brochure

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3473-70-Fringe-Field

Model 3473 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

3472-70_W_Gimbal_Rings-Unpackaging_Procedure

Model 3472 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

002629

Electromagnets are used extensively in MR systems—hyperpolarized gas, prepolarized, and other low field imaging systems often use electromagnets for the main field, and conventional superconducting systems commonly use electromagnets for the shim and gradient coils. The field produced by an electromagnet is only as temporally stable as the current supply that powers it. The steady state accuracy of a current supply is fundamentally limited by noise and long-term drift of the control electronics, and the accuracy of a current supply subject to transient demands of a system, such as our Prepolarized MRI system, is fundamentally limited by the dynamic response of the coil itself.

2005-MMM-5201-5403AC-Presentation

Application examples: • In-plane magnetic field effects in magnetic thin film, media and devices. FeRAM, MRAM,MOKE, SMOKE • Scanning Probe Microscopy, SEMPA, STM, ATF. • Calibration and test of Hall effect, MR, GMR sensors • Chemical reaction and biological sample activity study

55B0081

This manual contains all relevant information on the steps, which are necessary to start the 3MTS Teslameter software installation and to operate it properly, once the 3MTS is connected to the PC or Tablet via the delivered USB cable. All files, including the software, user manuals and calibration data have been stored on the 3MTS USB flash memory stick, which is a part of the Teslameter package

3MTS_OPMANUAL

The operational safety and functioning of the device can only be guaranteed if both the general safety and accident prevention regulations given by legislator, as well as the safety instructions provided in this Operation Manual are fully considered. We assume no liability for damages caused by the improper use or incorrect device operation.

The SPI Supplies Family of Vacuum Pump Fluids

The SPI Supplies Family of Vacuum Pump Fluids Pump fluids can be segmented by application (e. g. mechanical pump vs diffusion pump) or fluid type (e.g. perfluorinated polyether vs. silicone vs. polyphenyl ether vs. dioctyl sebacate vs. other hydrocarbon type fluids).

SPI-Module™ Sputter/Carbon Coater System™

The SPI Supplies Sputter/Carbon coating system allows the flexibility to choose between carbon evaporation and metal sputtering, all in the same system.

In Situ Probing of IgG Conjugated Gold Nanoparticles in Liquids by SEM and ToFSIMS

We report recent results of in situ observations of IgG conjugated gold nanoparticles in a novel portable vacuum compatible microfluidic device using scanning electron microscope (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The unique feature of the liquid flow cell is that the detection window is open to the vacuum allowing direct probing of the liquid surface. The liquid is held within the aperture by the surface tension. The flow cell is composed of a silicon nitride (SiN) membrane and polydimethylsiloxane (PDMS). We have demonstrated that it is fully compatible with vacuum operations for surface analysis. The aperture can be drilled through the 100 nm SiN using a SEM focused ion beam (FIB) or the primary ion beam in ToF-SIMS. Characteristic signals of the conjugated gold nanoparticles were successfully observed through the aperture by both energydispersive X-ray spectroscopy (EDX) in SEM and ToF-SIMS.

Technical-Information Silver Paint

Silver Conductive paint (SPI # 05001-AB, 05002-AB) was one of the earliest products introduced by SPI Supplies sometimes in the late 1970’s. This high purity silver paint has not changed in formulation since that introduction. However, the labels on the bottles have.

SPI Supplies Plasma Prep™ RIE

The SPI Supplies Plasma Prep Reactive Ion Etcher (RIE) uses a chemically reactive anisotropic plasma to etch and remove materials from package devices, wafers, and other substrates where a directional field is needed. In failure analysis labs, the use of wet etching for these samples is not only dangerous, in many cases it causes undercutting due to the isotropy of the etch. The Plasma Prep Reactive Ion Etcher uses dry etching to create an anisotropic etch—meaning that the etch is uni-directional

05001-2 Silver Con Paint RoHS2

Structure Probe Inc. / SPI Supplies confirms that: 05001-AB, 05002-AB, 05002-GA, 05002P-AB, and 05002-GA Silver Conductive Paint are RoHS2 compliant, fulfilling the definitions and restrictions defined under Directive 2011/65/EC of the European Parliament and of the Council of 21 July 2011.

Combo mPrep Tweezers

From Microscopy Innovations, LLC, a better way to prepare TEM specimens and grids The mPrep™ System is a new concept for gaining personnel efficiency, improving quality and reducing cost in microscopy and histology laboratories.

Apiezon N Grease MSDS

Apiezon N grease is one of the most widely used vacuum greases within the field of cryogenics, where its ability to improve heat transfer and craze-free performance characteristics at low temperatures are especially important.The product is also widely used at ambient temperatures, information on which is in the data sheet "Apiezon L, M & N Greases."

Apiezon L M and N Ultra High and High Vacuum Greases Datasheet

Apiezon L, M and N greases have been specifically developed for vacuum use,but are also extensively used for nonvacuum purposes in a variety of industrial and scientific applications.

Apiezon AP201 Vapour Booster Pump Fluid

Apiezon AP201 Vapour Booster Pump Fluid is respected around the globe for its superior quality and stability. M&I Materials Limited is the sole manufacturer of AP201 booster pump oil. It is produced in our purpose built factory in the UK. We sell direct through our online shop or via our extensive network of distributors. If you require large quantaties please call us today to discuss discounts.

Apiezon L M and N Ultra High and High Vacuum Greases Datasheet

Apiezon L, M and N greases have been specifically developed for vacuum use, but are also extensively used for nonvacuum purposes in a variety of industrial and scientific applications.

美国ARS-LT4液氦液氮型连续流低温恒温器

LT4系列连续流恒温器是经济连续流恒温器，可进行光电磁各种低温测试。 LT4既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。 典型特点 1. 液氦流 2. 铝制结构 3. 1.25英寸的大透明光学窗口 4. 大样品视角利于光学采集(F/1) 5. 4 K 液氦操作 6. 4.2K下液氦消耗率为0.75 LL/hr 7. 兼容液氮(77 K操作) 8. 可根据客户要求进行定制

美国ARS公司-LT3-WMX-1SS-液氦型超低温恒温器

LT3-WMX-1SS 是一套液氦高性能系统，系统全部由不锈钢结构真空罩和焊接不锈钢仪表裙组成，该系统能够达到10-7torr的真空环境，测试温度范围从＜2K（泵抽情况下）-350K， 温度稳定性为2mK。可用于多种不同实验环境。

美国ARSLT3M超高真空（UHV）型液氦低温恒温器

LT3M可定制冷指长度到1200mm,非常适合需要长冷指的表面物理实验。 广泛应用于UHV，STM,表面分析等领域。

美国ARS LT3OM & LT3BOM-显微型液氦液氮低温恒温器

LT3B-OM恒温器专为UHV显微拉曼设计，可烘烤至150℃，所有法兰通用铜片密封。也适用于其它各类低振动要求的光学显微实验。窗口专为科学实验而设计，可现场更换。 LT3-OM恒温器专为显微拉曼设计，也适用于其它各类低振动要求的光学显微实验。1.52英寸的样品腔设计使得该恒温器可用于大多数显微测试台。它拥有连续可调的样品座，利于用户更好调节工作距离。 该款恒温器真空外罩为抛光不锈钢焊接结构，为样品提供了一个洁净的环境。平滑的不锈钢结构限制了水和油的分压，大大降低了样品表面水汽的附着，从而使得实验过程中无水峰。该款恒温器具备LT3不同于其它恒温器的所有特点，包括大大降低液氦消耗提升制冷效率的热交换型液氦传输管线。

美国ARSDS-LN400-液氮型低温恒温器

LN400液氮储槽型恒温器是经济连续流恒温器，可进行光电磁各种低温测试。 LN400使用液氮进行工作，工作温度77K至500K（高温可到800K），结构可根据客户需要进行定制。

美国ARS LT3B超高真空(UHV)管状连续流低温恒温器

LT3管状连续流低温恒温器应用十分广泛，拥有很多独特特点，如热交换型液氦传输管线可以提高制冷效率而且极大的消除振动。 LT3恒温器拥有不锈钢仪表群，独特的双O圈设计使它易于安装，校准，移除真空外罩。 LT3根据使用条件不同有很多不同设计，如： LT3K可与Newport Kappa测角器集成; LT3G可与Huber 5012.12集成，而且LT3G的小径向间隙使得其应用非常广泛; LT3B是真正的UHV冷头(10-11 Torr) ，该款恒温器都用焊接接头和金属密封取代了橡胶O圈密封; LT3M可定制冷指长度到1200mm,非常适合需要长冷指的表面物理实验。