美国ARS显微型超低振动超精细闭循环低温恒温器-X20-OM

TMI CCS Carbon Ceramic Sensor™ Type D

CCS sensors are the latest development of TVO resistors with a carbon ceramic composite construction which exhibit a single resistance verses temperature curve. CCS sensors are available calibrated or uncalibrated and offer exceptionally fast response times, excellent repeatability and long term stability, extremely robust and resistant to the harshest environments including magnetic fields and high dose radiation

Si43510uATypResp

Model SI-435 Silicon Diode Temperature Sensors Si-435 Silicon Diodes from Scientific Instruments offer the industry’s highest 4K accuracy in an interchangeable/uncalibrated diode temperature sensor. The CAP package is the smallest encapsulated diode mount on the market while the SMD package offers the utility of a compact surface mount. Individually calibrated options are available where millikelvin accuracy is required.

Model SI-415 Silicon Diode Temperature Sensors

The Scientific Instruments Model Si-415 Silicon Temperature Sensors operate over a wide temperature range and are miniature in size. They are linear over a wide temperature range interval, and have high sensitivity in their lower range. The silicon diode temperature sensors are interchangeable to a standard V/T curve.

我司在深圳某高校成功安装美国ARS超高真空高效单级制冷机

近日在深圳某高校成功安装美国ARS（ADVANCED RESEARCH SYSTEMS）超高真空高效单级制冷机。

我司在上海某研究所成功进行了美国ARS低温恒温器与Huber设备集成

近日我司在上海某研究所成功进行了美国ARS（ADVANCED RESEARCH SYSTEMS）低温恒温器与Huber设备集成。

VIS-Datasheet-T56-250C_v1_1

The T56-250C is a high speed transimpedance amplifier (TIA) IC designed for use by 56G receiver modules in fiber optic transmission systems. The T56-250 operates from a single +3.3 V supply typically dissipating 250 mW of DC power and is designed for the use with PIN photodetectors in a wire-bond assembly The IC has a single-ended input (IN) and a differential output (OutP, OutN). It includes the cathode connection for the photodiode (Cath) as well as a bias path through the internal pin (PD). The TIA features input/output DCoffset cancellation and is equipped with various analog control pins (NoXing, Vxing, Vmod and BW) which allow for zero-crossing adjustment, gain and peaking control.

VIS-Datasheet-D50-1300M

These high speed photodetector modules consist of an InP pin photodetector integrated with a 50 µm-core diameter multimode fiber for optical input. The responsivity is greater than 0.5 A/W at 980 nm and 0.6 A/W at 1310nm. The modules are engineering samples and use an external DC.

VIS-Datasheet-A50-300C90

The A50-300C90 is a three stage high speed driver IC designed for the use with 50 Gbit/s optical modulated laser in fiber optic transmission systems. The A50-300C90 operates from a single +5 V supply. It features a high voltage drive capability and low power consumption.

helium_level1

The AMI family of liquid helium level instruments offer a wide range of solutions. All instruments pass a constant current through a superconducting Niobium Titanium (NbTi) filament and measure the resistance. The portion of the filament in liquid helium becomes superconducting (i.e. no resistance). The resulting resistance of the wire above the liquid is converted to a level signal. Advanced circuit designs offer our customers many advantages. Years of trouble free service are the result of rugged construction both inside and out. All our instruments and sensors from 1” to 36” are stock items for quick delivery. Our experienced staff offers prompt repair service when needed. OEM instrument design and manufacturing partnerships are always welcomed if our standard products do not meet your needs.

Cryogen_Free_Magnets_Info_Brief

The simplest magnet system is one where a sample insert has a small 6T magnet bolted at the bottom. Such an insert would have an integral variable temperature insert with sample space of 25 mm. These inserts are very effective in performing transport studies on nano size specimens and can be a useful tool to demonstrate the Quantum Hall Effect for educational purposes or for prescreening samples before they are tested at facilities that are not easily accessible.

我司在深圳某高校成功进行了美国ARS低温恒温器与奥林巴斯（OLYMPUS）显微镜集成

近日我司在深圳某高校成功进行了美国ARS （ADVANCED RESEARCH SYSTEMS）低温恒温器与奥林巴斯（OLYMPUS）显微镜集成。

STT - shaft twist tester Flyer German

STT – Shaft Twist Tester Fertigungsnahe optische Drallprüfung von Radialwellen-Dichtringsitzen Um eine Undichtheit bei einer Radialwellendichtung zu vermeiden, ist die Dichtungsfläche der Welle drallfrei zu fertigen. Durch die optische Beugung können Drallstrukturen sichtbar gemacht werden, deren Amplituden deutlich unterhalb der Rauheitsamplituden der Dichtfläche liegen. Schnell und zuverlässig kann somit eine Qualitätskontrolle in unmittelbarer Nähe zum Bearbeitungsprozess erfolgen. Mit Prüfzeiten im Sekundenbereich sind die Geräte vielseitig einsetzbar z.B. für die Eingangskontrolle, für die Prozessoptimierung des Herstellungsverfahren oder für die 100% - Kontrolle in der Serienfertigung.

magview Flyer German

Der magview ist ein universell einsetzbares magnetooptisches Auslesegerät zur schnellen und präzisen Visualisierung magnetischer Strukturen. Als mobiles Handgerät kann er zur Qualitätssicherung und Streufeldanalyse eingesetzt werden. Visualisiert werden beispielsweise magnetische Streufelder von Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten.

mageye Flyer German

Das mageye ist ein digitales Mikroskopkamera-System mit magnetooptischer Sensorspitze zur schnellen und präzisen Visualisierung magnetischer Streufelder. Das handliche System, inklusive Anwendungssoftware, erlaubt eine Echtzeitanalyse magnetischer Streufelder und ist beispielsweise für eine mobile Qualitätsprüfung von Schweissnähten bestens geeignet. Visualisiert werden ausserdem Streufelder von Magnetstreifenkarten, Audiobändern, magnetischen Encodern, abgeschliffenen Seriennummern sowie von Dipol- und Multipolmagneten.

Helmholtz Coils Flyer English

One of Matesy’s core competencies is the management of development projects. In cooperation with you, we create a concrete solution, manufacture a system according to your specific needs and support the implementation process.

m-axis Flyer German

m-axis is a measurement system to investigate the magnetic specifications of permanent magnetsm-axis is a measurement system to investigate the magnetic specifications of permanent magnets(magnetization angle and magnetic moment). Due to the modular setup it is possible to customizethe measurement range of the m-axis system in addition to the four standard ranges and for 100% quality control.

导电银环氧树脂胶EPOXY H20S 1OZ/组

EPO-TEK®H20S是EPO-TEK®H20E的改良版，主要用于芯片键合的模具冲压和点胶技术。 EPO-TEK®H20S是一种高度可靠，双组份的银填充环氧树脂，具有光滑触变粘稠性。 除了高导电性，短的固化周期，证明的可靠性，以及方便的配合比以外，EPO-TEK®H20S的使用是非常简单。

HVG

低温用道康宁真空脂 特性 • 良好的润滑性能和密封性能 • 低挥发性 • 优良的耐水性、耐化学品性能及耐高温和低温性能 组成 • 硅油 • 增稠剂 应用 • 化工设备的密封和润滑油脂 • 用于活塞阀、控制阀、流量计轴承、陶瓷活塞阀、灭火器阀门、水设备阀门、合成橡胶垫圈及密封圈在高温下使用时的润滑 • 真空和压力系统的密封用润滑油脂 • 用于双筒望远镜中O型环的润滑，防止精密镜头起雾

ScanningTunnelMicroscopy扫描隧道显微镜(STM)

扫描隧道显微镜(STM)是在扫描探针显微镜(SPM)领域发展起来的最早的技术。它生成的成像表面具有原子分辨率，横向分辨率为~ 0.1 nm，深度为~ 0.01 nm。STM 的原理是基于量子隧穿。在进行测量时，由于探针非常接近表面，所以有一个导电的尖头。同时，在探针和样品之间施加电压偏置，使电子通过空间隧道。所得到的图像是叶尖在样本表面上扫描时叶尖高度的变化。结果图像是在样品表面上扫 描尖端时尖端高度的变化。

ScanningElectronMicroscopy

Scanning Electron Microscopy (SEM) is one of the most versatile instruments for the examination of the surface topography and composition of the sample. The surface images result from the interaction of a focused electron beam with atoms in the sample, which can achieve < 1 nm resolution. Signals generated during the interaction include secondary electrons (SE), back-scattered electrons (BSE), characteristic X-ray and cathodoluminescence, absorbed current, and transmitted electrons. SE is the most standard signal that SEM detects. It has low energies, which leads to a higher resolution. BSE occurs in deeper places within the sample and strongly relates to the atomic number. It is very often used for composition analysis along with characteristic X-ray spectra. Many SEM measurements are conducted when the sample stage is cooled down to cryogenic temperatures based on different sample properties.

AtomicForceMicroscopy(AFM)

Atomic Force Microscopy (AFM) is one of the methods of scanning probe microscopy (SPM), which is a collective technique to measure local properties, e.g., height, friction, and magnetism. AFM consists of a sharp tip at the end of a cantilever as the probe, which is normally 3-6 μm tall pyramid and 15-40 nm end radius, to measure the force between the tip and the sample surface.

AtomicForceMicroscopy(AFM)原子力显微镜

原子力显微镜（AFM）是扫描探针显微镜（SPM）的一种方法，它是一种测量局部性质（如高度、摩擦力和磁性）的综合技术。AFM 由悬臂末端的尖端作为探针组成，探针通常为3-6μm 高的棱锥体，端部半径为15-40nm，用于测量探针与样品表面之间的作用力。

Time-DomainThermoreflectance时域热反射测量法(TDTR)

时域热反射测量法(TDTR)是测量各种块状和薄膜材料及其界面热导率的最有效方法之一。其原理是利用表面反射率的变化来推导材料被加热时的热特性。该装置包括一个泵和探针脉冲激光器。利用泵浦激 光器产生声脉冲。声波脉冲可以在界面处处于透射或反射状态，这取决于界面的属性。探针激光通过光电探测器探测反射的声脉冲。从而可以测量反射率随时间的变化，并且通过匹配理论模型来提取热特性。对温度依赖的TDTR 可以借助低温恒温器来研究电子和声子等载流子输运过程的基本物理。

RamanScattering拉曼散射

拉曼光谱是一种检测晶格或分子振动或旋转模式的技术。有两种类型的散射，瑞利散射和拉曼散射。瑞利散射是弹性的，拉曼散射是非弹性的。当拉曼散射发生时，入射光子和散射光子之间存在能量差异。拉曼光谱显示出这种能量差异，它与晶格或分子的特定振动或转动模式相对应。因此，常用来识别和分析样品的结构和组成。它还可以与显微镜结合来观察单个纳米结构或称为微拉曼光谱的微观区域。

QuantumOptics

In semi-classical and quantum-mechanical physics, light can be considered not only as electromagnetic waves but also as particles called photons. The interaction of the matter at the submicroscopic level and the incoming light is in the fields of quantum optics. The main goal of quantum optics is to understand the quantum information and learn how to manipulate and realize the technologies. The popular studies of it include quantum correlation, quantum entanglement, and quantum information processing, which have a huge potential application of quantum computing.

QuantumOptics量子光学

在半经典和量子力学物理中，光不仅可以被视为电磁波，也可以被视为称为光子的粒子。亚微观层面上的物质与入射光的相互作用属于量子光学领域。量子光学的主要目标是了解量子信息，学习如何操纵和实现这些技术。它的研究热点包括量子相关、量子纠缠和量子信息处理，这些在量子计算中有着巨大的应用潜力。

Photoluminescence光致发光

光致发光(PL)光谱是一种广泛应用于半导体和分子的光学和电子性质表征的技术。PL 是任何形式的物质在吸收光子后的光发射过程。入射光子在可见区域激发它的一个电子到激发态。然后，当电子返回 到较低能态时，它会辐射一个光子。在量子力学中，能带是量子化的，这意味着只有某些跃迁是允许的。因此，发光的能量峰被认为是不连续的。

PhotoelectricEffect光电效应

当光线照射到材料上时，由于能量从光传递到材料中的载流子上，电子会从表面喷射出来。这种效应称为光电效应，发射的电子称为光电子。实验结果表明，只有超过阈值频率的光才能产生光电子。低于这个阈值，材料就不会发射电子。这个阈值被称为功函数，它归因于电子结合能。

MössbauerSpectroscopy

Mössbauer spectroscopy is a spectroscopic method to detect a slight change in energy levels of an atomic through recoil-free resonant absorption and emission of gamma rays in solids. Typically, chemical shift,quadrupole splitting, and hyperfine splitting can be observed. Due to the narrow linewidth of gamma rays,Mössbauer is extremely sensitive in terms of energy resolution. In the resulting spectra, the gamma-ray intensity is plotted as a function of the source velocity. At velocities corresponding to the resonant energy levels of the sample, a fraction of the gamma rays are absorbed, resulting in a drop in the measured intensity and a corresponding dip in the spectrum. The absorbing nuclei and sample can be characterized by the number, positions, and intensities of the dips in the spectrum. Recently, some charge state and electronic configurations have been confirmed through Mössbauer spectroscopy at cryogenic temperatures.

Magneto-OptoKerrEffect磁光克尔效应(MOKE)

磁光克尔效应(MOKE)是一种通过磁化表面反射光的强度和偏振变化来研究材料磁化结构的技术。MOKE是磁光效应的一种。研究反射光的克尔效应与检测透射光的法拉第效应类似。在磁化矢量相对于反射面和入射面的方向上，有极MOKE、纵向MOKE、横向MOKE 和二次MOKE。

ElectronTransport

In classical physics, when an electric potential is applied through a bulk of metal or semiconductor, carriers will be driven. The electrical resistance can be obtained by Ohm’s law. This effect is called electron transport. This is one of the most common techniques to characterize materials. Many of the phenomena can be observed through this echnique, such as electrical conductivity, electron mobility.

ElectronTransport电子输运

在经典物理学中，当电势通过一大块金属或半导体施加时，将驱动载流子，电阻可由欧姆定律得出，这种效应被称为电子输运，是表征材料特性最常见的技术之一。通过该技术可以观察到许多现象，如电导率、电子迁移率等。当材料的尺寸缩小到可以与德布罗意波长或非弹性散射长度(二维材料、纳米线和量子点)相媲美时，在低温下就会出现量子现象，例如二维材料的弱局域化和量子点的单电子。四探针法通常用于电子输运，以消除引线和接触电阻，从而获得更精确的测量结果。

NobleGasAnalysis

The noble gases, i.e., helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), form a group of chemical elements with similar properties, such as odorless, colorless, and monatomic. Most importantly, they are chemically unreactive. Therefore, they are also called inert gases. Because of its chemically and biologically inert and unique isotopic features resulting from radioactive decay, the noble gases are commonly utilized to probe the ocean and Earth process, e.g., rocks and minerals dating. High-purity and quantitative noble gas sample preparation for mass spectrometric analysis are normally required. Therefore, adsorption of noble gases in an ultra-high vacuum activated charcoal trap at cryogenic temperatures is the most common procedure. The desorption of individual noble gas is a function of temperature for mass spectrometric measurements.

我司在西安某高校成功进行了美国ARS低温恒温器与Horiba光谱仪耦合

近日我司在西安某高校成功进行了美国ARS （ADVANCED RESEARCH SYSTEMS）低温恒温器与Horiba光谱仪耦合。

Power Feedthroughs

Power Feedthroughs — Hermetic glass-to-metal seal feedthroughs are designed to meet Mil-DTL-5015 Circular and industry standard Subminiature-D configurations. Ceramic seal high power feedthroughs provide three high power feedthrough options. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies using compatible materials such as PEEK, ceramic, Kapton® insulated wire and stainless steel are just some of the vacuum compatible materials used to provide complete in-vacuum wiring. Air-service Cable Assemblies — Industry standard cables and connectors are utilized to provide the end user with complete connectivity solutions from bench equipment to the feedthrough flange.

Coaxial Feedthroughs

Six Connector Interface Types — Wide variety of configurations. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies. Air-service Cable Assemblies — Industry standard cables and connectors.

我司在深圳某高校成功安装美国ARS显微拉曼用超稳型低温恒温器

X-20-OM超低振动超精细闭循环恒温器是特别为光学显微实验设计，如显微-光致发光(Micro-PL)，显微拉曼等。 X-20-OM系列恒温器使用氦气交换冷却样品，系统振动级别仅为3-5nm,样品处最低温度可达3.5K，最高温度可达800K。

LT3B超高真空连续流低温恒温器

LT3B超高真空连续流低温恒温器应用十分广泛，拥有很多独特特点，如热交换型液氦传输管线可以提高制冷效率而且极大的消除振动。

LT4连续流低温恒温器

LT4系列连续流恒温器是经济连续流恒温器，可进行光电磁各种低温测试。 LT4既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。

我司在中国科学院福建物质结构研究所顺利完成美国ARS标准型无液氦低温恒温器升级验收工作

近日我司在合中国科学院福建物质结构研究所顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）标准型无液氦低温恒温器升级验收工作，该款低温恒温器与爱丁堡（Edinburgh Instruments）光谱仪FLS980 无缝匹配。

LT3-OM显微型连续流低温恒温器

LT3-OM 恒温器专为显微拉曼设计，也适用于其它各类低振动要求的光学显微实验。1.52 英寸的样品腔设计使得该恒温器可用于大多数显微测试台。它拥有连续可调的样品座，利于用户更好调节工作距离。

ds.options

A high temperature thermal switch attached to the tip of cryocooler permits heating the sample to 500K. Vacuum Pump – Model VPS-2.Pumping speed = 5.5 m3/h. Ultimate Pressure = 10-4 mbar Complete system includes the following: • Two Stage mechanical, direct drive, rotory vane, • 1 Meter Stainless bellows hose • Vacuum Gauge • Vacuum valve • Oil Backstreaming adsorption trap • Oil mist eliminator

ds.floor-stand

ARS Floor Stand for Ultra-Low Vibration Interfaces ·Adjustable height ·Extruded aluminum construction ·Wheels for moving stand

AutomatedSystemFlier

? Complete Turn-Key Operation ? Easy to Use ? State-of–the-Art Remote Control ? Real-Time Dynamic System Status ? Materials Property Testing: Optical, Electrical, Magnetic

202&204

Advanced Research Systems, Inc manufactures its own series of Closed Cycle Cryocoolers. They are pneumatically driven GM Cryocoolers, that are offered as both single and two-stage units.The single stage units are designed when fast cooldowns and high cooling capacities are needed. These systems have been modified to allow for high cooling capacities at 77 K. The single stage units reach base temperatures of < 25 K. The cooling power at 77 K ranges from 16 W to 200 W.The two-stage units are designed for when low temperatures are needed. These system come available at 10 K, < 5.5 K, and < 4 K cryocoolers. The cooling power at 4.2 K are 0.1 W, 0.2 W or 0.8 W.

HeliumReliquefierRD2017000-C1.DE215

The Helifier provides an economical way to recover helium exhaust from laboratory cryostats and liquefy it for continued use. Cooled by the powerful ARS CS215S cryocooler the Helifier will generate liquid helium at a rate of 18L/day and store up 100 liters of liquid which is roughly a weeks worth of normal helium usage for cryostat applica-tions.

DS-Helifier

The Helifier provides an economical way to recover helium exhaust from laboratory cryostats and liquefy it for continued use. Cooled by the powerful ARS CS215S cryocooler the Helifier will generate liquid helium at a rate of 18L/day and store up 100 liters of liquid which is roughly a weeks worth of normal helium usage for cryostat applica-tions.

DS-superconducting-magnet-probe-station

The ARS Closed Cycle Superconducting Magnet probe station model is designed for the ultimate in flexibility for non-destructive device testing. This system enhanced with a 3T Vertical superconducting Magnetic Field. Those systems are ideal for the study of magneto-optical and magneto-electrical properties in variety of experiments, including quan-tum dots, spintronic devices and nanoscale electronics. The probe con-figuration and system design can be customized to suit your specific experimental requirements.

tn2xrdd5003

Bruker manufactures the X-ray diffraction equipment and user references are given at the end of this note. The ARS cryocooler permits the user to characterize the samples over a very large temperature range with out the need for liquid helium. ARS has supplied the cryocooler to customers with the D-500 and D-5000 system. Bruker has incorporated the cryostat to the newer D-8. This is available directly from Bruker. The ARS design has the advantage of placing the cryocooler through the bore of the diffractometer and bolting the cryocooler to the sample mounting flange of the diffractometer. The sample holder extends out the front of the machine to align with the x-Ray beam.

DS-CS204AF-DMX-20-OM

The DE204*F-DMX-20-OM is our Ultra Low Vibration Closed Cycle Cryostat for Optical Micrscopy applications such as MicroRaman and Micro Photoluminescence. The DE204*F-DMX-20-OM uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This pre-vents almost all vibration from being transmitted to the sample. Sample vibrations of 3-5 nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 4-5K and the cooling capacity is roughly cut in half at varying temperatures.

μdrift彩页

温度范围： 4K-500K 防热辐射屏安装有冷窗，更好的保证最低 温时的温度稳定。 振动： 3-5nm 峰-峰振动 @2.4Hz <1nm 更高频率

uDriftmicroscopycryostat

High Performance ULVD Cryostat will feature: •Ultra Low Vibrations. •Ultra Low Drift in XY. Wide temperature range. •Ultra Low Drift in Z axis. Wide temperature range. •UHV compatible materials. •UHV design. Stainless body. •Piezo positioners, XYZ. Available as options •Large breadboard capability. •Cold objective in sample chamber for Near Field Optical Experiments. •Side and top mounted optical windows. •Low noise wiring. •RF and DC •Monolithic frame for easy installation.

µDriftSystemFlier

The ARS μDrift Cryostat is purpose built to remove key barriers to long-term optical and variable temperature experiments. Combining the company’s experience in robust cryogenics with convenient optical access and new low drift designs assures success when studying nanometer scale samples and other structures.

GlassCoatedWire玻璃包丝（镀玻璃线材玻璃涂层电学测试线缆）

美国GW Lab 一直致力于设计、开发和制造尺寸介于单微米和数百微米之间的玻璃涂层电学测试线缆。GW Lab 专门为客户的特殊需求定制电线和电线组件。固体玻璃独特的绝缘性使我们能够为各种高科技行业制造广泛的电子元件。我们成熟技术使得我们可以为客户研发新的线缆，即使是少量的。从研发到生产，我们在产品的各个阶段都为客户提供技术和销售方面的支持。

NEWT-Litz-Book

Litz wire consists of a number of individually insulated magnet wires twisted or braided into a uniform pattern with the primary benefit of reducing AC losses in high frequency windings. New England Wire Technologies offers unlimited Litz wire constructions with multiple types of insulation to meet agency and/or specific customer voltage withstand requirements.

美国GMW-hw-105c_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-102a_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-HG-0713

HG-0713 HG-0713は、超小型SON形状GaAsホール素子です。 定電流駆動時HG-0712より高感度になります。 標準はテーピングリール供給です。（10,000pcs.／Reel） 注意： 弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読みください。

美国GMW-hg-362a_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-186a_gmw

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-166a-2u_gmw

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG0A11

The Sensitivity and Offset are not calibrated in this kit, however the actual Offset voltage and Sensitivity are measured and are printed on the label. Any required calibration of these parameters could be accomplished by measuring the output when exposed to known fields and storing the values in a microprocessor or equivalent post processing. The AKM HG-106C-2U has a special lead frame which incorporates straight leads, allowing the Hall element to be mounted into a PCB slot, thus reducing the overall height of the assembly. See illustration on page 2.

美国GMW-AN_161

The AN_161KIT series of kits are PCB assemblies which provide an easy means to evaluate the Asahi Hall elements for magnetic field, electric current or position sensing applications. These kits can be used independently by themselves or with the GMW AN_160KIT, Universal Hall Interface Module (UHIM). There are two basic connection schemes depending on the kit part number as shown below. See the AN_160KIT specification sheet for details on the use of these kits with the UHIM.

美国GMW-AKM-RoHS_Statement

The Current Sensor Modules use a Hybrid Hall IC, which includes: a high sensitivity Hall element, an amplifier, a buffer, compensation circuitry, and a drive circuit for the Hall sensor. CQ206x and CQ209x Series also include an EEPROM unit providing factory-adjusted sensitivity and offset voltage for high accuracy. The compensation circuitry provides flat temperature dependence. The current conductor is electrically isolated from the sensor IC. The output is linear and ratiometric to the supply voltage.

VWM-S-1W-A60mm-MainView

VWM-S-1W-A60mm-MainView VWM-S-1W-A60mm-MainView VWM-S-1W-A60mm-MainView

VWM-S-1W-A40mm-MainView

VWM-S-1W-A40mm-MainView VWM-S-1W-A40mm-MainView VWM-S-1W-A40mm-MainView

VWM-S-1W-A40mm-FrontView

VWM-S-1W-A40mm-FrontView VWM-S-1W-A40mm-FrontView VWM-S-1W-A40mm-FrontView

VWM-S-1W-A20mm-TopView

VWM-S-1W-A20mm-TopView VWM-S-1W-A20mm-TopView VWM-S-1W-A20mm-TopView

VWM-S-1W-A20mm-RightView

VWM-S-1W-A20mm-RightView VWM-S-1W-A20mm-RightView VWM-S-1W-A20mm-RightView

VWM-S-1W-A5mm-RightView

VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView

VWM_choice

VWM-S-1W sensor parameters choice (VWM_choice_Rev3.0 program)

vishay_foil_resistor

Bulk Metal® Foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability.

VIBRATING-WIRE-SCANNER-FOR

Method of beam transverse profile measurement in accelerators by scanning wire is wide-spread in accelerator technology [1-6]. In this work vibrating wire is proposed to use as a scanning wire. In such way the system of radiation (or secondary particles) extraction and measurement can be removed. Dependence of oscillations frequency on beam scattering is determined by several factors. Our estimations show that influence caused by wire heating will dominate.

VAC-BR-High_Current_Sensors

VAC is the technology leader in DC and AC current sensing, providing a wide range of products to the industry. VAC owns state of the art R&D facilities and worldwide manufacturing sites, offering outstanding product quality at low cost. The VAC-invented measuring principle of the closed – loop sensor with magnetic probe as a zero field detector is distinguished by maximum precision of the current detection.

TUPF31

The safety re-examination of existing GANIL facilities requires the implementation of a safety system which makes a control of the beam intensity sent to the experimental rooms possible. The aim is to demonstrate that beam intensities stay below the authorized limits defined by the safety GANIL group.

TNG3DTM004a

The automatic recovery of the DTM user's and Calibration table is possible through use of cunning programming techniques when using a computer to control the DTM.

TNG3DTM001a

Caution: The software EPROMs may be damaged by static discharge. Use proper handling procedures to reduce the risk of damage. Items damaged by static discharge are not covered under warranty.

TNC-Cable-DR0645

TNC-Cable-DR0645 TNC-Cable-DR0645 TNC-Cable-DR0645

Thermo_Fisher_Chiller_1490G-CIRC_Manual

Thermo Scientific ThermoFlexTM Recirculating Chillers (Deluxe Controller)

SV

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40 Circular connectors with threaded joint acc. to IEC 60130-9, IP 40 Connecteurs circulaires avec verrouillage à vis suivant CEI 60130-9, IP 40

SOR-MAN-DLM600

AMETEK Programmable Power, Inc., a Division of AMETEK, Inc., is a global leader in the design and manufacture of precision, programmable power supplies for R&D, test and measurement, process control, power bus simulation and power conditioning applications across diverse industrial segments. From bench top supplies to rack-mounted industrial power subsystems, AMETEK Programmable Power is the proud manufacturer of Elgar, Sorensen, California Instruments and Power Ten brand power supplies.

SOR-DS-DLM699

The Sorensen DLM 600 series of programmable power supplies is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis.

SN-DS-i1a-magnetic-transducer

The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-k-for-i1a-mft

Hall Probe K for F1A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (47mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-h-for-i1a-mft

Hall Probe H for F1A Magnetic Transducers is a very thin (1.1mm) and long (42mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-h-for-f1a-mft

Hall Probe H for F1A Magnetic Transducers is a very thin (1.1mm) and long (42mm) single-chip fully integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

Shape-E-BNC

CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR

RCTrms

The RCTrms is an ac current transducer for permanent installation. Simple to install and easy to retrofit it combines the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of ac current.

RCTi

The RCTi is a current transducer for permanent installation. Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around. The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

RCT1A-INS

The RCT1A is a flexible, clip-around current transducer for measuring ac currents.The RCT1A is a direct replacement for metering class current transformers with a 0 to 1A output, combining safety and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

PPM-DS-p2p-FOBrochure

PPM's Fibre-Optic-Link (FOL) systems use a highly adaptable and modular platform making them ideal for a wide variety of test and instrumentation applications. Modules are available in a range of configurations, data formats and frequency ranges. PPM's Sentinel & Sentry range is the industry's choice for high quality and high performance antenna & probe remoting applications.

PEM-TN-CWTUM-HighFrequency

High Frequency Bandwidth High Frequency Bandwidth High Frequency Bandwidth

Output-signal-cable-CO50

Output signal cable CO50 Output signal cable CO50 Output signal cable CO50

NPCT-CF4-5-60-4-120-w

NPCT-CF4.5"-60.4-120/1.0 NPCT-CF4.5"-60.4-120/1.0 NPCT-CF4.5"-60.4-120/1.0

NPCT-175

NPCT-175 NPCT-175 NPCT-175 NPCT-175 NPCT-175 NPCT-175

NPCT-75-H

NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H

MX-BPM.manual

Multiplexed Beam Position Monitor User’s Manual Multiplexed Beam Position Monitor User’s Manual

MS2K-DR1830

MS2K-DR1830 MS2K-DR1830 MS2K-DR1830 MS2K-DR1830 MS2K-DR1830

MS2H-DR2150

MS2H PROBE OUTLINE MS2H PROBE OUTLINE MS2H PROBE OUTLINE

MS2D-DR0641

MS2D-DR0641 MS2D-DR0641 MS2D-DR0641 MS2D-DR0641 MS2D-DR0641

ML_MAN_PT2025

The PT 2025 NMR Teslameter System (Fig. 1) comprises the following: · Bench-top main unit with RS 232C and (as an option) IEEE-488 interfaces · At least one NMR probe · A multiplexer if several probes are required

MFCToolV10-Users-Manual

MFCTool V10 Magnetic Field Camera Software User's Manual

MFC3039

ASSEMBLY INSTRUCTIONS FOR THE MFC-3039 ROTATING PROBE-ARRAY HOLDER

MFC2046-Installation-and-Safety-Manual

Magnetic Field Camera MFC2046 Version 1.0 (Revision 1.2) December 2018 EN Installation and Safety Manual FR Manuel d'installation et de sécurité

Matesy-MO-PRES-MagnetoOpticalDomainAnalysisElectricalSteel

Matesy GmbH Steel domain analysis with the magneto-optical sensor system CMOS-MagView

Matesy-MAN-MO-Sensor-Instructions

Magneto-optical (MO) sensors are a new and innovative tool for observing the structure of magnetic information in magnetic materials. They can visualize two dimensional profiles of magnetic fields with nearly optical resolution using the Faraday Effect in real time thus allowing to analyze fields by a magneto-optical image. The sensor works in direct contact to the magnetic material. The MO sensor is made up of four layers: substrate, magneto-optical film, mirror and protection layer (Figure 1). The thin mirror layer is been upset on the MO layer to enable a light reflection during the application.

Matesy-MAN-CMOS-MagView

The CMOS-MagView is an innovative device for the optical visualization of magnetic fields. The highly engineered magneto-optial sensor technology visualize the magentic stray field of magnetic materials directly and at high optical resolution. The magneto-optical analysis of the test specimen provides concrete information about the field polarity, field homogeneity, distribution of the magnetic material and the magnetization properties.

Mag670-OM2497

Operation Manual for Mag670 Single Axis Magnetic Field Sensor

ew-612b_gmw

EW-612B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-402_gmw

EW-402 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

eq-711l_gmw

EQ-711L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-432l_e

EQ-432L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

DTM-133-S

DTM-133 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-132-Manual

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DS-HTS-110-AG-HF

APPLICATIONS HTS-110’s HF range is suitable for a variety of applications, including: • MOKE (Magneto-Optic Kerr Effect) • Variable Temperature Optical Cryostat • Quantum Hall Resistance Standard • Fourier Transform Mass Spectrometry

DS-DS-DSSIU-4-1U

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DS600UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 660A

DS600UB-1V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 950A

DS200ID-CD1000

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

DS.200.3MTS-TESLAMETER.18_USB-Handheld-Teslameter

The 3MTS is an easy-to-use handheld Teslameter/Gaussmeter to measure all 3 magnetic field components simultaneously within a very small a volume. It comes in two different versions.

DR5000IM

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 8000A

DR0995

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DQ640ID-B

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DM1200ID

Ultra-stable, high precision (ppm class) fluxgate technology DM Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1500A

CZ-3706

CZ-3706 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3704

CZ-3704 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

cwtultramini

The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

CWTMini50HF_Datasheet

Introducing the NEW CWTMini50HF,an extension of the CWTMiniHF range for even faster transient current measurement

CWT-Mini_MiniHF

New model featuring • A novel electrostatic shielded Rogowski coil providing excellent immunity to interference from fast local dV/dt transients or large 50/60Hz voltages • Extended (-3dB) high frequency bandwidth 30MHz for a 100mm coil • Peak di/dt capability up to 100kA/μs • Wide operating temperature from -40oC to +125oC • 4.5mm thick Rogowski coil with 5kV peak insulation.

CWT-Dimensions

ROGOWSKI CURRENT WAVEFORM TRANSDUCERS INSTRUCTIONS FOR USE CWT ULTRA MINI

cwt_0318

CWCT & BCM-CW-E CW Current Transformer Beam Charge Monitor for CW beams and Macropulses

CSA-KIT-summary

Sentron’s CSA-1VG is a single-axis integrated magnetic field sensor based on the Hall Effect. The circuit is fabricated using a conventional CMOS technology with an additional ferromagnetic layer. The ferromagnetic layer is used as a magnetic flux concentrator providing a high magnetic gain. Therefore, the circuit features very high magnetic sensitivity, low offset, and low noise. The CSA-1VG is packaged in a standard SOIC-8 full plastic package. This package provides high voltage isolation to the current conductor on the PCB (up to 600V) .

CSA-1VG-RoHS

Features: • Sensitive to a magnetic field parallel to the chip surface • Very high sensitivity • Linear output voltage proportional to a magnetic field • Wide-band: DC to 100kHz • Very low offset and offset-drift • Very low noise • Isolated from current conductor • Surface mount SOIC-8 package

CS_Series_PAD

CQ-3303 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3204

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3202

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3201

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3200

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2232

CQ-2232 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CPCO-Technical-Notes

SE Option - The SE stands for Single Ended and the output voltage from the CPCO will have a quiescent output voltage of 5.0V when there is no primary current (IPRI=0A). As the primary current (IPRI) increases in a positive direction, the output voltage will increase to the maximum level of 10.0V at IPRI=IPSAT. When the primary current increases in the negative direction, the output voltage will decrease toward 0.0V at IPRI=-IPSAT

CERN-68-13

AKM Magnetic Sensors Engineering Development Kits Demonstration Modules Application Case Studies

calibration-tool-mfcsv1-2

The SENIS MFCSv1.2 Calibration Set for magnetic field measurement is provided as an accessory for permanent magnet mapping applications, such as SENIS MMS (All-in-One Magnetic Field Mapping System). The MFCS is used to precisely determine the location of a Hall elements sensitive area.

BI_MAN_MAG03-OCTO-PSU-Issue

BARTINGTON MAG-03-OCTO-PSU POWER SUPPLY UNIT OPERATION/MAINTENANCE MANUAL

BI_MAN_MAG03MC-CU-MAG03MS-CU-issue

BARTINGTON MAG-03MC-CU & MAG-03MS-CU CALIBRATION UNIT OPERATION MANUAL

BI_mag690_FrequencyResponse_Charts

Mag690 Three-Axis Fluxgate Field Sensor, Amplitude and Phase Response v Frequency

BBM

The Ametes Bus Bar DC Current Sensor locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC sense the magnetic field as a function of current on both sides of the bus bar. This enables effective cancellation of external magnetic fields without magnetic cores or shielding which can give rise to non-linearity and hysteresis effects.

BBC

Beam-based methods to measure BPM?s center offset with reference to the pickup center and BPM?s resolution are proposed. Being built in a BPM, the methods provide a BPM verification by its own means.

app-note-cryosaver

CryoSaver current leads employ HTS tape which has anisotropic in-field performance. The current rating decreases much more severely for field oriented perpendicular to the plane of the tape than for field parallel to the plane (either along the long axis or across the width of the tape).

AN0039-Mag648-used-for-maritime-perimeter-surveillance

To detect small magnetic field fluctuations caused by movement of nearby ferromagnetic objects, thus indicating the presence of divers or small vessels

AN0032-Mag-03-for-Payload-Attitude-Control-on-Sounding-Rockets

To contribute to payload attitude control on board sounding rockets by providing accurate data on the Earth’s magnetic field.

AN0026-Mag-03-used-to-measure-ELF-magnetic-field-emissions-from-mobile-phones

To measure ELF (extremely low frequency) magnetic fields produced by mobile telephone handsets.

AN0024-Mag-03-and-Spectramag-6-used-in-magnetic-hygiene-tests-of-spacecraft-components

Pre-installation EMC testing (electromagnetic compatibility) of components, and pre-launch EMC testing of spacecraft.

AN0020-The-use-of-Bartington-Fluxgate-Magnetometers-in-MT

Applications include mineral prospection,hydrogeology, geothermal and oil exploration,astrophysics, and earthquake studies.

AN0009-Magnetic-suceptibility-in-archaeological-prospecting

Sensitive magnetometers have been used for many years for locating and planning archaeological sites. Originally developed in the 1950s for detecting pottery kilns by the thermoremanent magnetism of their baked clay construction, magnetometers were immediately found to respond also to ancient pits and ditches backfilled with topsoil.

Ametes_360ASM_Spec

FEATURES • Analog and PWM outputs for 0 ± 180 degrees • 10% to 90% active range output signals • Resolution of up to 9 bits • Magnet “Out of Range” discrete output • User selectable “Zero Angle” set • No external parts required • Single 5V supply • Small 1/2” dia encapsulated package

ak8789_e

Features ?High sensitive omnipolar operation ?Dual output ?Micropower operation 　Typ.6.5μA（average:VDD=1.85V） ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

AK8779B

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8779A

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8775-MS1316-E-00_110715-GMW

AK8775 is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The result of Hall effect latch operation in vertical and horizontal magnetic field is read out to OUTA pin and OUTB pin. AK8775 is for use in portable devices which uses rotational detection system or incremental pulse encoder such as jog dial utilized for input devices.

ACCT-S-075-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-016

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-E-RM-3R-manual

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-E-RM

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-datasheet

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-C-XXm

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

A_Mercury-Manual-Final

The Mercury Series chillers are designed to be used per the instructions in this manual. Used in any other fashion it may not perform to specification and may be less safe to operate in general. Failure to heed warnings and instructions listed in this manual may void the warranty, damage the unit, damage other equipment and possibly cause serious personal injury.

9311300016A-D-SUB-Cable-for-DSSIU

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2235-0A

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2153-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11907-0399-1_A_Gimbal_Mount_3472-70_System

Model 3472 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

11907-0355-0_S3_C_3480_General_Assembly

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5972_Magnet_Control_Users_Manual

5972_Magnet_Control_Users_Manual USER’S MANUAL 5972 MAGNET CONTROL

3480OG_Brochure

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3473_Dom_Min_Fac_Req_11Jan05

Model 3473 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

3472-70_W_Gimbal_Rings-Unpackaging_Procedure

Model 3472 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

55C0126

This manual contains all relevant information on the steps, which are necessary to start the 3MTS Teslameter software installation and to operate it properly, once the 3MTS is connected to the PC or Tablet via the delivered USB cable. All files, including the software, user manuals and calibration data have been stored on the 3MTS USB flash memory stick, which is a part of the Teslameter package

55B0081

This manual contains all relevant information on the steps, which are necessary to start the 3MTS Teslameter software installation and to operate it properly, once the 3MTS is connected to the PC or Tablet via the delivered USB cable. All files, including the software, user manuals and calibration data have been stored on the 3MTS USB flash memory stick, which is a part of the Teslameter package

3MTS SENIS flyer inner

We invented, produce and sell some of the most advanced magnetic field and electric current sensors on the markets. In the context of customized developments for specific applications we may licence part of our base technologies and designs to dedicated customers.

3mtslib

3mtsLib is a software library for easy data acquisition and communication with 3mts sensors. The software consists of a DLL to be imported into your data acquisition project

3MTS QSMANUAL

This manual contains all relevant information on the steps, which are necessary to start the 3MTS Teslameter software installation and to operate it properly, once the 3MTS is connected to the PC or Tablet via the delivered USB cable. All files, including the software, user manuals and calibration data have been stored on the 3MTS USB flash memory stick, which is a part of the Teslameter package

3MTS_OPMANUAL

The operational safety and functioning of the device can only be guaranteed if both the general safety and accident prevention regulations given by legislator, as well as the safety instructions provided in this Operation Manual are fully considered. We assume no liability for damages caused by the improper use or incorrect device operation.

SPI Supplies® Vacuum Greases

The Apiezon family of high vacuum greases are known the world over for their high quality, consistency and excellent compatibility for high vacuum applications. The Apiezon hydrocarbon greases are silicone and halogen free so there is never a risk of Si contaminating the microscope column. Most are made of pure hydrocarbon materials.

SPI Supplies® Brand Microanalysis Standards

High quality Standards for Microanalysis for any laboratory with EDS, WDS or EPMA

Secador-Desiccating Cabinets

The Secador desiccating cabinets form an entire family of products, known for their very high quality but with economical prices. They are intended for both long and short terms storage of critical laboratory samples that must be stored in a dry, dust-free and oil-free environment. These desiccator cabinets feature a new contemporary design and would fit right into the environment of any modern laboratory anywhere.The material of construction is DuraStar plastic which has all of the important mechanical and impact properties of polycarbonate for this application, but has the optical properties of an acrylic.

New from SPI Supplies

SPI Supplies has introduced a line of small,easy to use shakers, mixers, centrifuges and hotplates / stirrers. All products are available is 110V or 220V for use worldwide.

Technical-Information Silver Paint

Silver Conductive paint (SPI # 05001-AB, 05002-AB) was one of the earliest products introduced by SPI Supplies sometimes in the late 1970’s. This high purity silver paint has not changed in formulation since that introduction. However, the labels on the bottles have.

The SPI Supplies Family of Instruments

Your results will never be better than your sample preparation. See how SPI Supplies can help you deliver the highest quality results for all your SEM/EDS, TEM and FESEM applications.

Precision Glass Cutters

The SPI Supplies line of Precision Glass Cutters are designed to allow users to quickly and easily cut large pieces of materials into smaller sizes, utilizing either a carbide or diamond cutting wheel. It is not technically a "cutter", but rather creates a score mark in the material that allows the user to then create a clean break by snapping along the score line.

美国ARS超稳无液氦低温光学恒温器

• 4-500K温度 • 超低振动 • 超低漂移 • 超高真空兼容 • 选配纳米平移台 • 更大4英寸低温冷台 • 顶部及侧边窗口 • 低噪音测试引线 • 高频及直流测试 • 整体式结构，更方便安装

美国ARS CS204AF-FMX-19OP-顶端装载光学型闭循环低温恒温器

X-19OP是顶端装载样品的光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。 X-19OP系统有大的光学通路，可选择不同窗口适合各种光学实验。

美国ARS DS-CS210AF-GMX-19N-非光学顶端装载型闭循环低温恒温器

X-19-NO是顶端装载样品的非光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。 该系列恒温器尾部可做成非常细小，而且由无磁材料制成，特别适合匹配超导磁体进行磁化率及VSM测试。 X-19-NO系列恒温器可配备DE-202、DE-204或DE-210系列冷头。

美国ARS CS204AE-FMX-1AL标准光学型闭循环低温恒温器

X-1AL系列标准光学型闭循环低温恒温器因其测试灵活，价格经济而成为绝大多数实验室样品及装置测试的最优选择，该系统广泛应用于各种光、电、磁测试。 X-1AL系列恒温器可配备DE-202或DE-204系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。