美国ARS 显微型连续流低温恒温器-LT3-OM

DS-LT3MUHV液氦流型低温恒温器

ADVANCED RESEARCH SYSTEMS（ARS）公司生产的 LT3M Helitran UHV 液氦流型低温恒温器是真正的 UHV 冷头 (10-11 Torr)，其连接结构均为焊接接头和金属密封件。 如 ARS 所有的 LT3 系列液氦流型低温恒 温器一样，LT3M 非常先进，具有许多独特的功能，如其热交换型同轴液氦流动传输管线可以实现极高 的制冷效率和超低振动水平。 LT3M 的真正 UHV 特性、超低的埃米级振动、冷指可定制延长和可增加额 外的刚性支撑等特性使得该恒温器可以更加灵活的应用于各种 低温，是低温应用的理想选择。

VIS-Datasheet-VM100-850M-module

Ultrahigh-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Bitrates beyond 100G have been demonstrated with high order modulations: 4-PAM [1], DMT [2] and multi-CAP [3]. Multi mode and single mode VCSEL versions are available.

VIS-Datasheet-V50-850M-module

High-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Multi mode and single mode VCSEL versions are available.

VIS-Datasheet-V25-850M-module

High-speed transmitter module for test purpose with integrated 850nm VCSEL fiber coupled to an OM3 multimode fiber for optical output. The module is designed as engineering sample for high speed test applications. Multi mode and single mode VCSEL versions are available.

VIS-Datasheet-A56-230C_v1

The A56-230 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 200 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.

VIS-Datasheet-A56-105C

The A56-105 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 105 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.

Model 430 Power Supply Programmer

The AMI Model 430 Power Supply Programmer is a sophisticated digital power supply controller that allows an operator to manage a superconducting magnet system with unprecedented accuracy and ease. The Model 430 is designed to control a wide range of single, dual, and fourquadrant linear and switching power supplies. The most frequently used functions are accessible via single keystroke or shift plus keystroke. For other functions, a menu driven format guides the user to enter inputs using the push button front panel interface.

MAxes_Information_Brief

Multi-Axis Magnet systems for Vector Fields (MAxesTM)

LT4B超高真空液氦液氮型连续流低温恒温器

ARS 生产的Helitran LT4B 是一个真正的超高真空冷头(10-11 Torr)，所有的橡胶O 形密封圈被焊接接头和金属密封圈取代。 LT4B 是性价比最高的制冷剂连续流型UHV 低温恒温器。LT4B 既可以使用液氦也可以使用液氮。LT4 使用标准的传输管线和冷头。如果需要升级为同轴屏蔽流型传输管线，实现埃米级振动，向您推荐高性能的LT3B。

LT4B

The ARS manufactured LT4B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. The LT4B is our lowest cost liquid flow UHV cryostat. The LT4B works with either Liquid Helium or Liquid Nitrogen. The LT4 utilizes a standard transfer line and cold tip. In order to upgrade to our coaxial shield flow transfer line and angstrom level vibrations, you need to take a look at the high performance LT3B.

STT - shaft twist tester Flyer English

STT – Shaft Twist Tester Production-related optical twist testing on radial shaft sealings To avoid leakage on radial shaft sealings the sealing surface has to be manufactured without twist. Optical diffraction analysis can visualize twist structures with amplitudes far below the amplitude of the surface roughness. Applying this method, the quality control can be realized quickly and reliable within the production process. Testing times of a few seconds are making the device applicable in many cases, for example at the reception control, for optimization of the manufacturing process and even for the 100%-control in the serial production.

magview Flyer English

The magview is a magneto-optical device for the fast and accurate visualization of magnetic structures. As a handheld device, the system can be applied for qualitative tests and stray field analyses. The magview visualizes magnetic stray fields, for instance of magnetic stripe cards, magnetic encoders and multi pole magnets.

mageye Flyer English

The mageye is a digital microscope camera system with an integrated magneto-optical sensor tip for the fast and reliable visualization of magnetic stray field structures. The portable system, including a comprehensive user software allows realtime stray field analyses and quality tests of magnetic materials. It is possible to visualize magnetic stray fields of magnetic stripe cards, magnetic tapes, magnetic encoders, obliterated serial numbers, magnetic ink as well as di- and multipole magnets.

3MTS Flyer English

3MTS is the USB handheld Teslameter developed in cooperation with Matesys’ partner company SENIS AG.

3MTS Flyer German

3MTS ist ein handliches 3-achsiges Teslameter, welches in Zusammenarbeit von der Matesy GmbH und der SENIS AG in einer Kooperation entwickelt wurde.

ScanningTunnelMicroscopy

Scanning Tunnel Microscopy (STM) is the earliest technique that was developed in the scanning probe microscopy (SPM) area. It generates imaging surfaces with atomic resolution, which is ~ 0.1 nm in lateral and ~ 0.01 nm in depth. The principle of the STM is based on quantum tunneling. When conducting measurements,a conducting sharp tip as the probe is brought very close to the surface. In the meantime, a voltage bias is applied between the tip and sample to make electrons tunnel through space. The resulting image is the change in the tip height as the tip is scanned over the sample surface. Clean sample surface and tip, and low electronic and physical noise are required for high-resolution STM imaging. The STM can be widely used in UHV or any other gas or liquid ambients from the temperature of ~ 0K up to 1300K.

RamanScattering

Raman spectroscopy is a technique to detect the vibrational or rotational modes of lattice or molecules. There are two types of scattering, Rayleigh scattering, and Raman scattering. Rayleigh scattering is elastic, and Raman scattering is inelastic. When Raman scattering occurs, there is energy differentiate between the incident photons and scattered photons. Raman spectroscopy exhibits this energy differentiate, which corresponds with the specific vibrational or rotational mode of lattice or molecules. Therefore, it is commonly used to identify and analyze the structure and composition of the sample. It also can be combined with a microscope to observe single nanostructures or microscopic areas called micro-Raman spectroscopy.

QuantumOptics

In semi-classical and quantum-mechanical physics, light can be considered not only as electromagnetic waves but also as particles called photons. The interaction of the matter at the submicroscopic level and the incoming light is in the fields of quantum optics. The main goal of quantum optics is to understand the quantum information and learn how to manipulate and realize the technologies. The popular studies of it include quantum correlation, quantum entanglement, and quantum information processing, which have a huge potential application of quantum computing.

Ellipsometry椭圆偏振技术

椭圆偏振法是一种测量薄膜介电特性的光学方法。偏振光从样品表面斜反射，产生偏振反射光的振幅比和相位差椭圆，用椭圆偏振光谱仪测量，成分、粗糙度、厚度等信息，通过它可以得到掺杂浓度和其它材料特性。薄膜的本征物理性质也可以用椭偏仪的温度依赖性来研究。

Angle-ResolvedPhotoemissionSpectroscopy(ARPES)

Angle-Resolved Photoemission Spectroscopy (ARPES) is one type of photoemission spectroscopies to obtain information about the electronic band structure and Fermi surface of crystals in the reciprocal space. Soft X-ray is irradiated onto the crystal surface, and the kinetic energy of photoelectrons emitted from the surface is measured as a function of polar and azimuthal angles. Because electrons escape from the surface are projected through the surface, the direction of the momentum perpendicular to the surface is not conserved. Therefore, ARPES is an ideal tool for 2D materials because the direction of the electronic momentum of interest is parallel to the surface. The increased sensitivity of excitations can be achieved by reducing thermal energy at cryogenic temperatures.

ThermoelectricEffect

The thermoelectric effect is the relationship between thermal and electric. When a temperature difference is created on both sides of the device, carriers in material diffuse from the hot side to the cold side, which results in a voltage across the device. Conversely, when a voltage is applied, heat is transferred from one side to the other, a temperature gradient is created. The thermoelectric effect generally consists of three effects, Seebeck effect, Peltier effect, and Thomason effect.

IonTrap

Ion trap is a scientific technique to confine ions/charged particles in a small region of space through magnetic or/and electric fields. Many studies are carried out on the ion trap method, such as optical spectroscopic properties of the captured ion and mass spectrometric properties of fragment ions.

ElectronParamagneticResonance(EPR)ElectronSpinResonance(ESR)

Electron paramagnetic resonance (EPR)/electron spin resonance (ESR) is an important method to study unpaired electrons in organic and inorganic radicals, transition metal complexes, and some biomolecules.When paramagnetic compounds with unpaired electron spins are under magnetic fields and electromagnetic waves, normally in the microwave range of frequency, the transition between spin states is induced. The measurement is generally carried out with constant frequency, while the magnetic field varies. EPR/ESR spectrometer measures the absorption of electromagnetic radiation. Due to the short relaxation times of electron spins, EPR/ESR must be performed at cryogenic temperatures.

Vacuum Wire Wiring Accessories

Kapton® and Teflon® — Insulated wires for HV and UHV vacuum applications. Specialty and Thermocouple wire — T/C bare wire in matched pairs. Wiring Accessories — complete assortment of pins, tools, components, etc.

Thermocouple Feedthroughs

Type-K — Offers broadest temperature range (-200°C to +1250°C), and is the most widely used thermocouple type. For these reasons Accu-Glass supports Type-K with feedthroughs having Chromel® and Alumel® pins and mating contacts for maximum accuracy. Matched pin material for Type-T, J, E, S, R and C thermocouple are not available. Use of standard instrumentation feedthroughs with gold-plated nickel-iron alloy pins, and goldplated copper alloy contacts are offered instead. The error introduced using these pins and contacts is less than 2%. Cable Assemblies — Air side and UHV cable assemblies for all thermocouple types. Refer to specific cables for construction details.

Accessories

Connectors Vacuum Connectors & Cable Assemblies Kapton Insulated Wire Insulators & Spacers

X-15EPR闭循环低温恒温器

X-15系列低温恒温器专为低温电子顺磁共振（EPR）和电子自旋共振（ESR）而设计。O圈密封的石英样品小池使得系统可在不拆卸整套设备的前提下方便换样。可选蓝宝石或铜样品管。

X-12窄窗型闭循环低温恒温器

X-12系列闭循环低温恒温器专为霍尔，磁性，磁光，光电测试设计。独特的窄窗设计使得该款恒温器同样适用于电磁和磁性测试。 为满足在磁场环境下使用，改款恒温器大大缩小了真空罩的尺寸以满足其能伸入到磁铁的窄缝中。

ARS水冷机

美国ARS 水冷机   标准电压  频率 60 Hz 50 Hz 最小 200 V 200 V 最大 230 V 230 V 制冷量 3.9 kW 3.9 kW

我司在北京师范大学顺利完成美国ARS公司LT3液氦液氮型低温恒温器验收工作

近日我司在北京师范大学顺利完成美国ARS 公司（ADVANCED RESEARCH SYSTEMS）LT3 液氦/液氮型低温恒温器验收工作，搭配布鲁克Bruker VERTEX 80V 光谱仪；该款恒温器采用同轴液氦冷却低温传输管线，液氦消耗率同类产品最低0.7LL/hr@4.2K.降温时间只有20 分钟。

LT3液氦流型低温恒温器

LT3管状连续流低温恒温器应用十分广泛，拥有很多独特特点，如热交换型液氦传输管线可以提高制冷效率而且极大的消除振动。 LT3恒温器拥有不锈钢仪表群，独特的双O圈设计使它易于安装，校准，移除真空外罩。

LT3-OM显微型连续流低温恒温器

LT3-OM 恒温器专为显微拉曼设计，也适用于其它各类低振动要求的光学显微实验。1.52 英寸的样品腔设计使得该恒温器可用于大多数显微测试台。它拥有连续可调的样品座，利于用户更好调节工作距离。

ds.cs210-x5

Closed Cycle Cryostat for Neutron Scattering Experiments. The CS-210 is a high power cooler with fast cooldown and high cooling power.

ds.cs210-x3

Closed Cycle Cryostat for Non Optical Experiments, sample in vacuum. The CS-210 is a high power cooler with fast cooldown and high cooling power on both stages.

ds.samplehldrs

Optical (Transmission). 0.75 in. clear view. Flat Plate:Backscattering

202&204

Advanced Research Systems, Inc manufactures its own series of Closed Cycle Cryocoolers. They are pneumatically driven GM Cryocoolers, that are offered as both single and two-stage units.The single stage units are designed when fast cooldowns and high cooling capacities are needed. These systems have been modified to allow for high cooling capacities at 77 K. The single stage units reach base temperatures of < 25 K. The cooling power at 77 K ranges from 16 W to 200 W.The two-stage units are designed for when low temperatures are needed. These system come available at 10 K, < 5.5 K, and < 4 K cryocoolers. The cooling power at 4.2 K are 0.1 W, 0.2 W or 0.8 W.

ds.cs202-x2c

Closed Cycle Cryostat Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

DS-LT4-DMX-1AL

The LT4-DMX-1AL is our lowest cost liquid flow cryostat, for optical and elecitrical experiments. The LT4 works with either Liquid Helium or Liquid Nitrogen. The LT4 utilizes a standard transfer line and cold tip. In order to upgrade to our coaxial shield flow transfer line and angstrom level vibrations, you need to take a look at the high performance LT3-WMX-1SS.

DS-LT3OM_LT3BOM

The LT3-OM and LT3B OM (UHV) are designed for optical microscopy and nano-photonics with unique features not found in other cryostats. In addition to the slim 1.52” (LT3 OM) profile that allows it to fit on most microscope stages. The LT3/(3B)-OM have a continuously adjustable sample holder, ena-bling the user to fine tune the placement of the sample within the working distance of their micros-copy system.

Micro-coaxialcable

New England Wire Technologies designs and manufactures a wide range of coaxes from highly specialized miniature coaxes to audio/video coaxes and industry standard RG series coaxes. Microminiature Coaxial Cables (42 - 34 AWG) are typically offered with fluoropolymer dielectrics to yield the smallest size and lowest loss cables possible. Ideal for short distance signal transmission, applications include antenna leads, ccd cables, ultrasound cables and test equipment leads. Due to their small size, composite cables can be manufactured with high densities of these components; samples of composite cables using coaxes are illustrated in medical, instrumentation, communications & controls, and audio/video sections of this catalog.

美国GMW-hw-300b_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hq-0811_e

HQ-0811 HQ-0811は超小型SON形状量子井戸型InAsホール 素子です。 標準はテーピングリール供給です。（5000pcs./Reel） 注意：弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読み下さい。

美国GMW-hq-0222_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hg-0813_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0712

• 医療機器、安全装置、航空宇宙用機器、原子力制御用機器など、その装置?機器の故障や動作不良が、直接または間接を問わず、生命、身体、財産等へ重大な損害を及ぼすことが通常予想されるような極めて高い信頼性を要求される用途に弊社製品を使用される場合は、必ず事前に弊社代表取締役の書面による同意をお取りください。 • AKM products are neither intended nor authorized for use as critical components in any safety, life support, or other hazard related device or system, and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. • この製品は静電放電により破壊されやすいため取り扱いにご注意ください。 • Handling precautions required for preventing electrostatic discharge. • 当製品にはガリウムヒ素（GaAs）が使用されています。取り扱い及び廃棄に注意してください。 • This product contains galium arsenide(GaAs).Handling and discarding precautions required.

美国GMW-hg-372a_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-302a_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-186a_gmw

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-166a_gmw

AKEMD assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of any information contained herein.

美国GMW-hg-116c_e

These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products.

美国GMW-hg-106a_gmw

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-AN_161

The AN_161KIT series of kits are PCB assemblies which provide an easy means to evaluate the Asahi Hall elements for magnetic field, electric current or position sensing applications. These kits can be used independently by themselves or with the GMW AN_160KIT, Universal Hall Interface Module (UHIM). There are two basic connection schemes depending on the kit part number as shown below. See the AN_160KIT specification sheet for details on the use of these kits with the UHIM.

Worktop Elobau 3012015

Worktop Elobau 3012015 Worktop Elobau 3012015 Worktop Elobau 3012015

VWM-S-1W-A40mm-MainView

VWM-S-1W-A40mm-MainView VWM-S-1W-A40mm-MainView VWM-S-1W-A40mm-MainView

VWM-S-1W-A20mm-TopView

VWM-S-1W-A20mm-TopView VWM-S-1W-A20mm-TopView VWM-S-1W-A20mm-TopView

VWM-S-1W-A5mm-RightView

VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView VWM-S-1W-A5mm-RightView

VWM-Manual-VWM005

This document refers to the VMW-005 5-wire Vibrating Wire Monitor delivered to Argonne National Laboratory in 2007 to measure the profile of photon beams on the Advanced Light Source. The APS scientist who evaluated it is Glenn Decker.

vwmdatasheet

Beam transverse profile and position Beam Halo measurement

VSM-paper-accepted

A simple Vibrating Sample Magnetometer for macroscopic samples

vishay_foil_resistor

Bulk Metal® Foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability.

VIBRATING-WIRE-SCANNER-FOR

Method of beam transverse profile measurement in accelerators by scanning wire is wide-spread in accelerator technology [1-6]. In this work vibrating wire is proposed to use as a scanning wire. In such way the system of radiation (or secondary particles) extraction and measurement can be removed. Dependence of oscillations frequency on beam scattering is determined by several factors. Our estimations show that influence caused by wire heating will dominate.

VAC-BR-Stromsensor

This brochure covers the standard current sensor range of VACUUMSCHMELZE GmbH & Co. KG (VAC) for the floating measurement of currents. Customized solutions are available on request.

VAC-4640-X152

1000 A Current Sensor for ±24V- Supply Voltage for electric current measurement: DC, AC, pulsed, mixed ..., with a galvanic isolation between primary circuit (high power) and secondary circuit (electronic circuit)

TUPF31

The safety re-examination of existing GANIL facilities requires the implementation of a safety system which makes a control of the beam intensity sent to the experimental rooms possible. The aim is to demonstrate that beam intensities stay below the authorized limits defined by the safety GANIL group.

THM11176-TFM1186

Three-axis Magnetometers THM1176 and TFM1186 User's Manual

The-Parametric-Current-Transformer

Toroidal transformers are used to measure the beam current in beam lines and accelerators. Placing such a transformer hi the feedback loop of an operational amplifier will increase the useful frequency range (active current transformer). A magnetic modulator can be added to extend the response to DC current, maintaining with a control loop the transformer core at a zero flux state.

Tech-Note-Current-Transducer-Cable

Tech Note: Current Transducers “Wrap Around” or Distributed Primary Current Cable

Spectramag-6-OM2021

Operation Manual for Spectramag-6 Six-Channel Spectrum Analyser for Magnetic Field, Vibration and LF Acoustics SOFTWARE VERSION 6.203

Spacemag-Lite_DS2714

Bartington Instruments offers a fluxgate magnetometer for spaceflight applications. Spacemag-Lite® is ideal for a variety of low Earth orbit (LEO) missions, including commercial and scientific missions, where cost is a consideration.

Spacemag_Lite_OM3777

Operation Manual for Spacemag-Lite Three-Axis Magnetic Field Sensor

SOR-MAN-DLM600

AMETEK Programmable Power, Inc., a Division of AMETEK, Inc., is a global leader in the design and manufacture of precision, programmable power supplies for R&D, test and measurement, process control, power bus simulation and power conditioning applications across diverse industrial segments. From bench top supplies to rack-mounted industrial power subsystems, AMETEK Programmable Power is the proud manufacturer of Elgar, Sorensen, California Instruments and Power Ten brand power supplies.

SOR-DS-SG-Datasheet

The Sorensen SG Series (hereafter SG Series) represents the next generation of high power programmable DC power supplies. The SG Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20VDC output in a 3U package the SG leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

SN-DS-i1a-magnetic-transducer

The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By).

Shape-C-SMA

CURRENT TRANSFORMER- SHAPE C/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE C/SMA CONNECTOR

Shape-B-BNC

CURRENT TRANSFORMER- SHAPE B/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE B/BNC CONNECTOR

Seva_BIW08

VIBRATING WIRE SENSORS FOR BEAM INSTRUMENTATION Suren Arutunian

S-BPM-manual

Non-interceptive beam position measurement For linacs, microtrons and transfer lines Single bunch, macropulse and CW Beam charge range > 1000

S12-5

Features: • 3 Pole AC inlet IEC320-C14 • Class I power (with earth pin) • Protections: Short circuit/ Over load/ Over voltage/ Over temp. • Fix switching frequency and regulation • LED indicator for power on • Fully enclosed plastic case • Topology: Top switch circuit • Approvals: UL/ CUL/ TUV/ CB/ CE • 1 Year Warranty

RCTi

The RCTi is a current transducer for permanent installation. Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around. The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

PPM-DS-p2p-DCLink

The new DC point2point link is capable of transmitting analogue signals of up to 40MHz over singlemode fibre. This is equivalent to rise times of 10.3ns making it ideal for measuring HV transients on HVDC transmission lines. The modules are available in a fully EM shielded casing, or as a plug-in module for use with the various point2point housings.

PPM-DS-p2p-BatterySwitch

APPLICATIONS • Compatible with all point2point products. • Compatible with all battery technologies • Provide remote control of modules via a multimode fibre • Long distance transmission, will work in excess of 1km • Provide a fully isolated control signal with very high levels of shielding and immunity.

PPM-Chart-signal_latency_2m

Trace from a function generator and the output of a point2point link (with small offset in the time domain).

PPM-73461-HB-2-NiMH-battery-Handbook

Nickel Metal Hydride Battery Pack773461-HB-2 User Handbook

Performance_Comparison_Coreless

Performance Comparison of CQ330x Series Current Sensors (for industrial inverters)

PEM-CWTUM-Phase-error

CWTUM Gain and Phaze Error CWTUM Gain and Phaze Error

PAC1989_1993

? The connector body is connected to the cable shield. ? The wires at the end of the cable are soldered about 10mm.

NPCT-datasheet

DC beam current non-destructive measurement The New Parametric Current Transformer is the latest evolution of the Unser Transformer, commonly called DCCT, developed at CERN in 1966 by Klaus B. Unser.

MS3-RS232-Cable-DR2517

MS3-RS232-Cable-DR2517 MS3-RS232-Cable-DR2517 MS3-RS232-Cable-DR2517

MS2H-DR2150

MS2H PROBE OUTLINE MS2H PROBE OUTLINE MS2H PROBE OUTLINE

MS2G-drawing

MS2G magnetic susceptibility sensor MS2G magnetic susceptibility sensor

MMS-1A-RS-Operating-Manual_US

Magnetic Field Mapper MMS-1A-RS is the high-end version of the SENIS Magnetic Field Mapping Systems. It allows users to perform a fast, high resolution mapping of magnetic flux density around permanent magnets, electromagnets or electronic circuit boards. The map of the magnetic field can be presented as color coded 2D or 3D visual displays on a PC screen and as a table of numerical measured values. Measured data are analyzed in real-time, which provide data analysis capabilities for an advanced inspection, characterization and quality control of permanent magnets.

ML_MAN_PT2025

The PT 2025 NMR Teslameter System (Fig. 1) comprises the following: · Bench-top main unit with RS 232C and (as an option) IEEE-488 interfaces · At least one NMR probe · A multiplexer if several probes are required

ML_MAN_2025

The PT 2025 NMR Teslameter System (Fig. 1) comprises the following: • Bench-top main unit with RS 232C and (as an option) IEEE-488 interfaces • At least one NMR probe • A multiplexer if several probes are required

ML_DS_1176-1186

The world’s most compact 3-axis magnetometer. Plugs into desktop, laptop or handheld computers. Lightweight, low-power, go-anywhere, measure-anything.

Miniature-Probes-DS3939

Mag612 & Mag619 Miniature Three-Axis Fluxgate Probes

Matesy-MO-PRES-MagnetoOpticalDomainAnalysisElectricalSteel

Matesy GmbH Steel domain analysis with the magneto-optical sensor system CMOS-MagView

Matesy-MAN-MO-Sensor-Instructions

Magneto-optical (MO) sensors are a new and innovative tool for observing the structure of magnetic information in magnetic materials. They can visualize two dimensional profiles of magnetic fields with nearly optical resolution using the Faraday Effect in real time thus allowing to analyze fields by a magneto-optical image. The sensor works in direct contact to the magnetic material. The MO sensor is made up of four layers: substrate, magneto-optical film, mirror and protection layer (Figure 1). The thin mirror layer is been upset on the MO layer to enable a light reflection during the application.

Matesy-MAN-CMOS-MagView

The CMOS-MagView is an innovative device for the optical visualization of magnetic fields. The highly engineered magneto-optial sensor technology visualize the magentic stray field of magnetic materials directly and at high optical resolution. The magneto-optical analysis of the test specimen provides concrete information about the field polarity, field homogeneity, distribution of the magnetic material and the magnetization properties.

Mag690-MX-DR2690

Mag690-MX Outline Drawing Mag690-MX Outline Drawing

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor provides measurements of static and alternating fields up to 1mT. Its simplicity makes it ideal for integration into systems using large numbers of sensors in which unit cost is a critical concern.

Mag670-OM2497

Operation Manual for Mag670 Single Axis Magnetic Field Sensor

ew-712b_gmw

EW-712B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-650B_gmw

EW-650B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-502_gmw

EW-502 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EQ-733L_MS-1381-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 20mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 2mVp-p

EQ-731L_MS-1379-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 65mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 5mVp-p

eq-711l_e

EQ-711L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-430l_e

EQ-430L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-6781_gmw

EM-6781 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DTM-151-G_Manual_-S5

DTM-151 DIGITAL TESLAMETER with IEEE-488 GPIB Interface USER’S MANUAL

DTM-133-wGPIB-Manual

DTM-133 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DSSIU-4-1U

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers. Powers up to 4 x DS50 to DS2000 at the same time.

DS5000UBFS-10V7500A

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 8000A

DS2298-Mag-648-649

This range of three-axis fluxgate sensors offer sensitive low noise magnetic field measurements together with exceptionally low power consumption. Their compact size and battery powered operation make these sensors ideal for surveillance and perimeter security applications.

DS1000UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1100A

DS200ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

DS50UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 55A

DS.200.3MTS-TESLAMETER.18_USB-Handheld-Teslameter

The 3MTS is an easy-to-use handheld Teslameter/Gaussmeter to measure all 3 magnetic field components simultaneously within a very small a volume. It comes in two different versions.

DR0624

DR0624 Mag-03MS sensor outline with mating connector

DL2000ID-CB100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

Datasheet_DR10000IM

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 11000A

Data-Acquisition-Units-DS2519

Bartington Instruments’ data acquisition and conditioning units accept analogue inputs from most of our sensors and output the signal in either analogue or digital format, depending on the unit selected.

CZ-3703

CZ-3703 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3702

CZ-3702 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWTUM_accuracy

Positional accuracy and external currents Due to small variations in the winding density and coil cross sectional area the transducer output varies slightly depending on the position of the current in the coil and also the size of the current conductor relative to the coil.

cwtultramini

The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

CWT-Dimensions

ROGOWSKI CURRENT WAVEFORM TRANSDUCERS INSTRUCTIONS FOR USE CWT ULTRA MINI

cwt_mini

Instructions for CWT Integrator Module Fuse Replacement

CWT_Fuse_Replace_Instructions_GMW

Instructions for CWT Integrator Module Fuse Replacement

CU2-Connection-DR4034

CU2-Connection-DR4034 Operation Manual for CU2 Closed Loop Module

CT-04.10.Tech_.note

For personnel and equipment safety and measurement accuracy, current measurements on conductors at high voltage should be made only with a conducting shield cylinder placed inside the CT aperture. There should be a low electrical impedance connection from one end only to a reliable local ground. An inner insulating cylinder of adequate voltage isolation should be between the shield cylinder and the conductor at high voltage. Any leakage, induced or breakdown current between the high voltage conductor and the ground shield will substantially pass to local ground rather than through the signal cable to signal ground. Do not create a "current loop" by connecting the shield cylinder to ground from both ends. Current flowing in this loop will also be measured by the CT.

CSA-KIT-summary

Sentron’s CSA-1VG is a single-axis integrated magnetic field sensor based on the Hall Effect. The circuit is fabricated using a conventional CMOS technology with an additional ferromagnetic layer. The ferromagnetic layer is used as a magnetic flux concentrator providing a high magnetic gain. Therefore, the circuit features very high magnetic sensitivity, low offset, and low noise. The CSA-1VG is packaged in a standard SOIC-8 full plastic package. This package provides high voltage isolation to the current conductor on the PCB (up to 600V) .

CQ3202

CQ-3302 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3204

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3203

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3202

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3201

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3200

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2366

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2234

CQ-2234 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2092

CQ-2092 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2065

CQ-2065 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2064

CQ-2064 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ320A

CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A

BPS-85-70_30062017

Clip-on Rogowski current probes provide a convenient and accurate means of measuring alternating currents. The latest wideband probes use an innovative shielding technique to eliminate the effects of high electrostatic field strengths in today’s high power-density and high-speed circuits.

BI-AN-Connecting-your-own-Power-Supply-to-a-Bartington-Magnetic-Field-Sensor-AN0042

Bartington Instruments, single or three-axis fluxgate magnetic field sensor.

BCM-IHR-manual

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BBM-Schematic

The Ametes Bus Bar DC Current Sensor locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC sense the magnetic field as a function of current on both sides of the bus bar. This enables effective cancellation of external magnetic fields without magnetic cores or shielding which can give rise to non-linearity and hysteresis effects.

BBM

The Ametes Bus Bar DC Current Sensor locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC sense the magnetic field as a function of current on both sides of the bus bar. This enables effective cancellation of external magnetic fields without magnetic cores or shielding which can give rise to non-linearity and hysteresis effects.

Bartsoft-Mobile-OM2518

Bartsoft Mobile software acquires, corrects, displays, stores and prints data using Bartington Instruments MS3 meters. This guide explains how to use the software and helps the user understand how it works, including the function of all controls and windows.

app-note-hts-1101-01

APPLICATION NOTE: HTS110-01 END CAP RESISTANCE AND HEAT SINKING FOR HTS CURRENT LEADS

AN0039-Mag648-used-for-maritime-perimeter-surveillance

To detect small magnetic field fluctuations caused by movement of nearby ferromagnetic objects, thus indicating the presence of divers or small vessels

AN0036-Fluxgate-magnetometers-used-for-on-board-closed-loop-degaussing

To provide real time data for mitigation of magnetic signatures of ships and submarines.

AN0032-Mag-03-for-Payload-Attitude-Control-on-Sounding-Rockets

To contribute to payload attitude control on board sounding rockets by providing accurate data on the Earth’s magnetic field.

AN0028-Mag-01H-DI-used-in-Absolute-Declination-and-Inclination-Measurements

To calculate absolute values of declination and inclination in the Earth’s magnetic field at a specific location, for accuracy of magnetic measurements.

AN0023-Mag-01H-for-compass-safe-distance-testing

Make equipment compliant with international regulations, and to help ensure reliable navigation, by ascertaining the level of interference that the a particular item of equipment causes to a compass.

AN0022-Mag-01H-used-for-Verification-of-Magnetic-Shielding

To measure the effectiveness of magnetic shielding using magnetometer measurements.

AN0019-The-application-of-the-Bartington-Fluxgate-Magnetometers-in-TDEM

This note describes an improvement to the TDEM method which will mostly concern mineral exploration, in which the main interest is highly conductive bodies, such as ore bodies. This is articularly the case for exploration for nickel or sulphides.

AN0001-Applications-of-Single-axis-Fluxgate-Magnetometers

The Magnetic Resonance Imaging (MRI)equipment used in medical physics requires the generation of stable magnetic fields, and is therefore susceptible to interference from external fields. This might be caused by radio frequency interference, lower frequency interference from electrically-operated equipment - such as lifts within the same building - or from electric trains, even at a considerable distance. It is standard practice to survey an area prior to installation of this sensitive equipment to record the variations in the magnetic field, and thereby select a site with the least disturbance, or to establish the level of magnetic shielding required.

AN_BBM-01

This AN_BBM-01 provides guidance in sizing bus bars to obtain the desired BBM-01 Bus Bar Module sensitivity for DC currents. The BBM-01 determines the current in the bus bar by measuring on both sides of the bus bar, the magnetic field generated from the current through the bus bar. The magnitude of the magnetic field at the sensor is a function of the width and thickness of the bus bar as well as the current through the bus bar. This guide provides the output Sensitivity in mV/A for the BBM-01 as a function of bus bar width and thicknesses for various standard Imperial dimensioned bus bars.

AN_174KIT-Specification

The AN_174-X KITs provides a convenient method of evaluating the AKM CQ-330X Series SMT current sensing IC’s . There are four versions of the kit available to evaluate the CQ-3300, CQ-3301,CQ-3302 and CQ-3303 sensors. All kits have a maximum continuous current limit of 20Arms .The kits come with the CQ-330X IC and Capacitor mounted and can be used without any additional components.Included are additional parts that can be used by the customer to customize the kit to provide different connection schemes.

AKM-Current-Sensor-Parameter-Selection-Chart

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

AK8788-04APR2012

Features ?High sensitive omnipoler operation ?Micropower operation 　Typ.4.5μA (average : VDD=1.85V) ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

AK8775-MS1316-E-00_110715-GMW

AK8775 is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The result of Hall effect latch operation in vertical and horizontal magnetic field is read out to OUTA pin and OUTB pin. AK8775 is for use in portable devices which uses rotational detection system or incremental pulse encoder such as jog dial utilized for input devices.

ACCT-S-075-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-manual

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-E-RM-3R-dimensions

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-C-XXm

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

18900480_A_1060-62_Probe_Sample_Location_Range

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

16900450_B

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11900202

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2210-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2209-0-Outline-Drawing

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5203_C_Proj_Vert_Field_Magnet

USER’S MANUAL MODEL: 5203 PROJECTED VERTICAL FIELD ELECTROMAGNET

3480OG_Brochure

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480_Brochure

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480_17907-0728-0_C_Tapered_Sleeve

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

002629

Electromagnets are used extensively in MR systems—hyperpolarized gas, prepolarized, and other low field imaging systems often use electromagnets for the main field, and conventional superconducting systems commonly use electromagnets for the shim and gradient coils. The field produced by an electromagnet is only as temporally stable as the current supply that powers it. The steady state accuracy of a current supply is fundamentally limited by noise and long-term drift of the control electronics, and the accuracy of a current supply subject to transient demands of a system, such as our Prepolarized MRI system, is fundamentally limited by the dynamic response of the coil itself.

2005-MMM-5201-5403AC-Presentation

Application examples: • In-plane magnetic field effects in magnetic thin film, media and devices. FeRAM, MRAM,MOKE, SMOKE • Scanning Probe Microscopy, SEMPA, STM, ATF. • Calibration and test of Hall effect, MR, GMR sensors • Chemical reaction and biological sample activity study

SPI Supplies Vacu Prep II™

From the solid-state electronics for precise control and reproducibility to the convenient, easy to use touch screen interface, the Vacu Prep II is designed to be an easy to use instrument. The self-contained turbo molecular pump is capable of quickly reaching vacuum levels of 10-7 torr, while the large baseplate with multiple feed throughs accommodates a variety of fixtures to handle almost any application.

SPI Supplies® Tweezers

The largest offering of high quality scientific tweezers, used for the most demanding requirements in research laboratories world-wide...

Quick and Easy Adaptation of Molecular Biology Technology to Tissue Embedment Polymerization

Using the SPI Cure™ with a standard heating block for 1.5 snap-cap conical tubes, at temperatures from 55–59°C, we have achieved safe and complete polymerization of LR White (acrylic) and SPI Pon (epoxy) resins in both protected and unprotected BEEM® capsules as well as 00-gelatin capsules. Please note that this report concerns a novel3 adaptation of dry-block heating technology designed for molecular biological procedures.In this test, we have purposefully used only resin blanks.Finally, we report that in the case of LR White, no degradation of the material of which the BEEM® capsules are constructed has been observed in either ‘protected’ or ‘unprotected’ heating regimes. We recommend careful testing of embedding molds not specifically mentioned in this paper.

New from SPI Supplies

SPI Supplies has introduced a line of small,easy to use shakers, mixers, centrifuges and hotplates / stirrers. All products are available is 110V or 220V for use worldwide.

Technical-Information Silver Paint

Silver Conductive paint (SPI # 05001-AB, 05002-AB) was one of the earliest products introduced by SPI Supplies sometimes in the late 1970’s. This high purity silver paint has not changed in formulation since that introduction. However, the labels on the bottles have.

SPI Supplies ® Grids

SPI Supplies® stocks the most complete selection of the highest-quality grids available today.

Combo mPrep Tweezers

From Microscopy Innovations, LLC, a better way to prepare TEM specimens and grids The mPrep™ System is a new concept for gaining personnel efficiency, improving quality and reducing cost in microscopy and histology laboratories.

Apiezon M Grease MSDS

Apiezon L, M and N greases have been specifically developed for vacuum use, but are also extensively used for nonvacuum purposes in a variety of industrial and scientific applications.

Apiezon J Oil Safety Data Sheet

In addition to AP201 we also manufacture sealing oils, Apiezon J and Apiezon K, which are used in situations where moderate viscosity and low vapour pressure are required.

美国ARS公司-LT3-WMX-1SS-液氦型超低温恒温器

LT3-WMX-1SS 是一套液氦高性能系统，系统全部由不锈钢结构真空罩和焊接不锈钢仪表裙组成，该系统能够达到10-7torr的真空环境，测试温度范围从＜2K（泵抽情况下）-350K， 温度稳定性为2mK。可用于多种不同实验环境。

美国ARSLT3M超高真空（UHV）型液氦低温恒温器

LT3M可定制冷指长度到1200mm,非常适合需要长冷指的表面物理实验。 广泛应用于UHV，STM,表面分析等领域。

美国ARS LT3OM & LT3BOM-显微型液氦液氮低温恒温器

LT3B-OM恒温器专为UHV显微拉曼设计，可烘烤至150℃，所有法兰通用铜片密封。也适用于其它各类低振动要求的光学显微实验。窗口专为科学实验而设计，可现场更换。 LT3-OM恒温器专为显微拉曼设计，也适用于其它各类低振动要求的光学显微实验。1.52英寸的样品腔设计使得该恒温器可用于大多数显微测试台。它拥有连续可调的样品座，利于用户更好调节工作距离。 该款恒温器真空外罩为抛光不锈钢焊接结构，为样品提供了一个洁净的环境。平滑的不锈钢结构限制了水和油的分压，大大降低了样品表面水汽的附着，从而使得实验过程中无水峰。该款恒温器具备LT3不同于其它恒温器的所有特点，包括大大降低液氦消耗提升制冷效率的热交换型液氦传输管线。

美国ARS LT3B超高真空(UHV)管状连续流低温恒温器

LT3管状连续流低温恒温器应用十分广泛，拥有很多独特特点，如热交换型液氦传输管线可以提高制冷效率而且极大的消除振动。 LT3恒温器拥有不锈钢仪表群，独特的双O圈设计使它易于安装，校准，移除真空外罩。 LT3根据使用条件不同有很多不同设计，如： LT3K可与Newport Kappa测角器集成; LT3G可与Huber 5012.12集成，而且LT3G的小径向间隙使得其应用非常广泛; LT3B是真正的UHV冷头(10-11 Torr) ，该款恒温器都用焊接接头和金属密封取代了橡胶O圈密封; LT3M可定制冷指长度到1200mm,非常适合需要长冷指的表面物理实验。

美国ARS CS204AF-FMX-19OP-顶端装载光学型闭循环低温恒温器

X-19OP是顶端装载样品的光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。 X-19OP系统有大的光学通路，可选择不同窗口适合各种光学实验。