美国ARS 大样品腔闭循环低温恒温器 X-4

TMI Introducing CCS sensors

A CCS sensor is predominately a carbon ceramic amalgam housed in a hermetically sealed ceramic coating. These resistors were originally developed as electronic components which would survive high radiation fluxes (they are able to withstand neutron radiation in excess of 1017N/cm2)

VIS-Datasheet-V25-1550M-module

High-speed transmitter module for test purpose with integrated 1550nm VCSEL fiber coupled to a 9/125 µm single mode fiber for optical output. The module is designed as engineering sample for high speed test applications.

VIS-Datasheet-A56-230C_v1-1

The A56-230 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 200 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.

Product-Catalog-2021

VI Systems GmbH (VIS) is a developer and manufacturer of optoelectronic components for optical communication, consumer and automotive applications. In the field of optical communications VIS offers optical components, such as vertical cavity surface-emitting lasers (VCSELs) and PIN photodiodes capable of up to 224 Gbps per channel and beyond. VIS VCSEL driver and PIN amplifier integrated circuits operate up to 56 Gbps with NRZ modulation. The latest generation of VCSEL and PIN photodiodes allow 400 Gbps PAM-4 energy efficient data transmission over one fiber with four channel short wave division multiplexing (SWDM) at 850 / 880 / 910 and 940 nm wavelength.

Model SD-6-15 Storage Dewar Magnet System

Model SD-6-15 Storage Dewar Magnet System • 6 Tesla magnet with vertical access • Low-loss liquid helium storage dewar • 4K sample insert

Opti-MAxesTM Model OPMX-141-1

Opti-MAxesTM Model OPMX-141-1 Superconducting Magneto-Optical Vector Magnet System

MaxesMX-4.5-9-30

MAxesTM Model MX-4.5/9-30 Superconducting Vector Magnet System

tube-inspector Flyer English

The tube-inspector is an automated system for the fast and precise measurement of tubular targets. It was developed to analyze coated pipes and tubes (e. g. rotational targets) before and during the production process. The system provides information about the quality of the process and the lifetime of tubular targets. Parameters, such as the diameter, ellipticity and deflection can be determined.

tube-inspector Flyer German

Der tube-inspector ist ein automatisiertes System zur geometrischen Vermessung von Rohrtargets und Magnet Bars. Das System wurde für die Analyse beschichteter Rohre und Leitungen (bspw. rotierende Targets) vor und während des Produktionsprozesses entwickelt. Hierzu gehören Aussagen über die Qualität des Prozesses sowie die Lebensdauer der Targets.

magtrack Flyer German

Das magtrack System basiert auf dem magnetischen Marker Monitoring Verfahren und wurde entwickelt, um die Bewegungsabläufe in geschlossenen Systemen aufzuzeichnen, zu analysieren und gegebenenfalls zu optimieren. Mit dem magtrack ist es möglich, die absolute 3D-Position im Raum sowie die Rotation eines magnetisch markierten Partikels zu detektieren. Das magtrack System ist modular aufgebaut und kann somit an beliebige Anlagen und Systeme angepasst werden.

cmos-magview Flyer German

Der cmos-magview ist ein digitales magnetooptisches Auslesesystem zum schnellen und präzisen Visualisieren magnetischer Streufelder. Das Sensorsystem erlaubt eine Echtzeit-Magnetfeldanalyse und ist für die Qualitätsprüfung von Magneten geeignet. Visualisiert werden Streufelder von,beispielsweise, Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten. Eine intuitive Anwendungssoftware übernimmt die Darstellung mithilfe von Falschfarben.

Magneto-OptoKerrEffect磁光克尔效应(MOKE)

磁光克尔效应(MOKE)是一种通过磁化表面反射光的强度和偏振变化来研究材料磁化结构的技术。MOKE是磁光效应的一种。研究反射光的克尔效应与检测透射光的法拉第效应类似。在磁化矢量相对于反射面和入射面的方向上，有极MOKE、纵向MOKE、横向MOKE 和二次MOKE。

Pressure Relief Busrtdisc

Low Pressure Burst Discs — One-Time-Use, 9~11.5 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. High Pressure Burst Discs — One-Time-Use, 15~25 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. PRV TM Pressure Relief Valves — Adjustable and reusable, 0.5~2 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings.

X-19-OP光学型闭循环低温恒温器

X-19OP是顶端装载样品的光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。

X-4大样品腔闭循环低温恒温器

X-4大样品腔闭循环恒温器拥有不锈钢结构和仪表群，并有更大的样品空间，可放置金刚石压砧或其他大体积样品。标准的真空罩有4个窗口位置，底部可加第五个窗口位置。 X-4系列恒温器可配备DE-202或DE-204系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

ds.cs202-x15

The Displex cryocooler is perfectly suited for EPR experiments at controlled low temperatures in Laboratories where Liquid Helium is impractical or where long duration experiments are frequently performed. These cryogen free systems can regulate the sample temperature between 4K and 450K

DS-CS202AF-DMX-20B

The CS202*F-DMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE202*F-DMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE202 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS202AI-DMX-1SS

The CS202*I-DMX-1SS is a high performance closed cycle cryostat for Optical, Electrical, and Magnetic sample testing. It has an all stainless steel vacuum shroud along with a welded stainless steel instrumentation skirt. The system is capable of vacuum levels of 10-7 Torr with an appropriate vacuum pump.

µDriftSystemFlier

The ARS μDrift Cryostat is purpose built to remove key barriers to long-term optical and variable temperature experiments. Combining the company’s experience in robust cryogenics with convenient optical access and new low drift designs assures success when studying nanometer scale samples and other structures.

DS-LT4-DMX-1AL

The LT4-DMX-1AL is our lowest cost liquid flow cryostat, for optical and elecitrical experiments. The LT4 works with either Liquid Helium or Liquid Nitrogen. The LT4 utilizes a standard transfer line and cold tip. In order to upgrade to our coaxial shield flow transfer line and angstrom level vibrations, you need to take a look at the high performance LT3-WMX-1SS.

DS-LT3B

The ARS manufactured LT3B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats, the LT3B is an advanced liquid helium flow cryostat utilizing many unique features, such as the matrix heat exchanged and the coaxial shield flow transfer line to achieve unparalleled efficiency and ultra low vibration levels. The combination of True UHV and angstrom level vibrations makes the LT3B ideal for low temperature STM application. For UHV surface science where very long cold fingers are required we have the LT3M with customizable length up to 1200 mm and rigid support tube to allow for cleaving and manipulation.

DS-CS204AF-FMX-19OP

The OmniplexTM, DE204*F-FMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-204 cryocooler. The ARS OmniplexTM systems features large optical access and quick sample change. The OmniplexTM comes with 4 window ports and with warm and cold windows. The sample stick can use any of the starndard ARS sample holders as well as receive a second set of temperature control instrumentation for fine tuning of the sample temperature. The system allows for a fast intial cooldown (~90 min to 20K and 2 1/2 hrs to base temperature).

用于MEMs和NEMs研究的超高真空低温探针台

ARS 生产制造的高精度的低温探针台，电学测试频率可达67GHz 和并可进行各类光学测量。 超低振动的样品环境和宽量程变温范围使其特别适合研究MEMs 器件、量子材料、超导纳米线、半导体等。

美国GMW-hw-300b_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hg-0815_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0712

• 医療機器、安全装置、航空宇宙用機器、原子力制御用機器など、その装置?機器の故障や動作不良が、直接または間接を問わず、生命、身体、財産等へ重大な損害を及ぼすことが通常予想されるような極めて高い信頼性を要求される用途に弊社製品を使用される場合は、必ず事前に弊社代表取締役の書面による同意をお取りください。 • AKM products are neither intended nor authorized for use as critical components in any safety, life support, or other hazard related device or system, and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. • この製品は静電放電により破壊されやすいため取り扱いにご注意ください。 • Handling precautions required for preventing electrostatic discharge. • 当製品にはガリウムヒ素（GaAs）が使用されています。取り扱い及び廃棄に注意してください。 • This product contains galium arsenide(GaAs).Handling and discarding precautions required.

美国GMW-hg-362a_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-166a_gmw

AKEMD assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of any information contained herein.

美国GMW-HG0A14

The Field Sensor PCB is very flexible and the small size of the tip enables evaluation of the HG-106C-2U for the measurement or control of the magnetic field in assemblies such as loud speakers, inductors, magnetic actuators, current sensors and electric motors or generators.

美国GMW-HG0A11

The Sensitivity and Offset are not calibrated in this kit, however the actual Offset voltage and Sensitivity are measured and are printed on the label. Any required calibration of these parameters could be accomplished by measuring the output when exposed to known fields and storing the values in a microprocessor or equivalent post processing. The AKM HG-106C-2U has a special lead frame which incorporates straight leads, allowing the Hall element to be mounted into a PCB slot, thus reducing the overall height of the assembly. See illustration on page 2.

Wada-FCT

For any experiments that use beams of an accelerator,monitoring the beam intensity is always an important concern. It is particularly useful if one can continuously measure the beam current without disturbing the beams. Counting elastic scattering particle from the target is often used for such a purpose,however, the dynamic range of measurable beam intensity is limited and the calibration often changes for different experimental conditions.

VAC-DS-4644-X054

700 A - Stromsensor Modul / Current Sensor Module (Molex Connector)

VAC-BR-High_Current_Sensors

VAC is the technology leader in DC and AC current sensing, providing a wide range of products to the industry. VAC owns state of the art R&D facilities and worldwide manufacturing sites, offering outstanding product quality at low cost. The VAC-invented measuring principle of the closed – loop sensor with magnetic probe as a zero field detector is distinguished by maximum precision of the current detection.

Turbo-ICT-manual

Turbo-ICT & BCM-RF-E Turbo Integrating Current Transformer Beam Charge Monitor – RF Electronics User’s Manual

TNG3DTM003a

The Group3 Digital Teslameter is a precision electronic measuring device. Because of the nature of the measurements it is asked to do it is frequently exposed to conditions that are considerably worse than is normally encountered by precision instruments. Because of this due care has to be taken when installing it.

TNG3DTM001a

Caution: The software EPROMs may be damaged by static discharge. Use proper handling procedures to reduce the risk of damage. Items damaged by static discharge are not covered under warranty.

TN_FCT_04-08r1

This Bergoz Instrumentation TechNote compares data taken on a real beam with data taken in the lab before shipment using an instrument-simulated beam, in order to predict the performance of an In-flange.FCT after it is installed on the beam.

The-Parametric-Current-Transformer

Toroidal transformers are used to measure the beam current in beam lines and accelerators. Placing such a transformer hi the feedback loop of an operational amplifier will increase the useful frequency range (active current transformer). A magnetic modulator can be added to extend the response to DC current, maintaining with a control loop the transformer core at a zero flux state.

Technical-Data-Cables

Features & Benefits ? Rugged, cut-proof and rodent-resistant cable construction ? Rugged metal connector with Push-Pull locking mechanism ? MTP connector providing direct connection to Sentinel 3 - Rx6 ? Supports up to 6 Sentinal3 transmitters (via Breakout box) ? Integral shutter reduces dust ingress and improves reliability ? Dust and water resistant to IP65 when connectors are mated.

Spacemag-Lite_DS2714

Bartington Instruments offers a fluxgate magnetometer for spaceflight applications. Spacemag-Lite® is ideal for a variety of low Earth orbit (LEO) missions, including commercial and scientific missions, where cost is a consideration.

SOR-MAN-DLM600

AMETEK Programmable Power, Inc., a Division of AMETEK, Inc., is a global leader in the design and manufacture of precision, programmable power supplies for R&D, test and measurement, process control, power bus simulation and power conditioning applications across diverse industrial segments. From bench top supplies to rack-mounted industrial power subsystems, AMETEK Programmable Power is the proud manufacturer of Elgar, Sorensen, California Instruments and Power Ten brand power supplies.

Shape-E-SMA

CURRENT TRANSFORMER- SHAPE E/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE E/SMA CONNECTOR

Shape-E-BNC

CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR

Shape-D-SMA

CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR

S-BPM-manual

Non-interceptive beam position measurement For linacs, microtrons and transfer lines Single bunch, macropulse and CW Beam charge range > 1000

S12-5

Features: • 3 Pole AC inlet IEC320-C14 • Class I power (with earth pin) • Protections: Short circuit/ Over load/ Over voltage/ Over temp. • Fix switching frequency and regulation • LED indicator for power on • Fully enclosed plastic case • Topology: Top switch circuit • Approvals: UL/ CUL/ TUV/ CB/ CE • 1 Year Warranty

rotating-stage_rftm

? Direct-drive concept provides faster rotating speeds and enhanced position sensitivity ? Ultra-low profile design – only 45 mm in height ? High efficiency DC step-motor optimizes available torque ? Proprietary glass scale encoder ensures 0.005°repeatability ? 6 mm diameter through-hole for convenient cable routing

RG2040-Manual

The RG 2040 option gives the METROLAB 2025 Teslameter the possibility to regulate the magnetic field generated by electromagnets having resistive or superconductive coils with iron or air cores.

RD102-EM3242

The RD102-EM3242 is a reference design for the AKM EM-3242 Non-Contact Angle Position Sensing IC. The EM-3242 senses the angle of magnetic field component in the top plane of the device package. The EM-3242 provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The EM-3242 has two operating modes. One with the “In Range” detector enabled and one with the “In Range” detector disabled. The “In Range” detector includes internal circuitry which causes the output voltage to drop to 0V whenever the magnetic field level at the EM-3242 is greater than 60mT or less than 10mT.

RD101-EM3242

The RD101-EM3242 is a reference design for the AKM EM-3242 Non-Contact Angle Position Sensing IC. The EM-3242 senses the angle of magnetic field component in the top plane of the device package. The EM-3242 provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The EM-3242 has two operating modes. One with the “In Range” detector enabled and one with the “In Range” detector disabled. The “In Range” detector includes internal circuitry which causes the output voltage to drop to 0V whenever the magnetic field level at the EM-3242 is greater than 60mT or less than 10mT.

RCTrms-Technical-notes

All measuring instruments are subject to limitations. The purpose of these technical notes is to explain some of those limitations and to help the engineer maximise the many advantages of PEM’s Rogowski current transducers. These technical notes should be read in conjunction with the RCTrms short-form datasheet.

RCTrms

The RCTrms is an ac current transducer for permanent installation. Simple to install and easy to retrofit it combines the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of ac current.

RCT1a

The RCT1A is a genuine Current Transformer (CT) replacement but hasall the intrinsic benefits of a thin, light-weight, flexible, clip-around Rogowski(sense) coil. Just like a CT the RCT1A secondary output is an industrystandard 0 to 1A (5VA pf 1) instantaneous current proportional to themeasured primary current.

Principle-of-Zero-Flux-CTs

The primary current, ??, in a conductor through a magnetic core will generate a magnetic flux in the core ????.

Performance_Comparison_CQ2

Performance Comparison of CQ233x series Current Sensors (for industrial inverters)

PAC1989_1993

? The connector body is connected to the cable shield. ? The wires at the end of the cable are soldered about 10mm.

OM1938-Magnetic-Shield

Operation Manual for TLMS-O100 Open-End Magnetic Shield TLMS-C100 Capped-End Magnetic Shield

NPCT-datasheet

DC beam current non-destructive measurement The New Parametric Current Transformer is the latest evolution of the Unser Transformer, commonly called DCCT, developed at CERN in 1966 by Klaus B. Unser.

NPCT-115-H

NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H

NPCT-115

NPCT-115 NPCT-115 NPCT-115 NPCT-115 NPCT-115 NPCT-115

MX-BPM-Datasheet

Optimized for electron/positron Storage Rings 1μm X and Y resolution Handles >75dB beam intensity range Each button sampled up to 10 000 times per second

MX9-07-5201_E_Proj_Field_Magnet_Complete

USER’S MANUAL MODEL: 5201 PROJECTED FIELD ELECTROMAGNET

MS3-OM3227

Operation Manual for MS3 Magnetic Susceptibility Meter

MS3-DR3417

MS3 Outline Drawing MS3 Outline Drawing MS3 Outline Drawing

MS2-OM0408

Operation Manual for MS2 Magnetic Susceptibility System

MFCToolV10-Users-Manual

MFCTool V10 Magnetic Field Camera Software User's Manual

MFC3039

ASSEMBLY INSTRUCTIONS FOR THE MFC-3039 ROTATING PROBE-ARRAY HOLDER

Matesy-MO-DS-MagnetoOpticalSensors

The magneto-optical sensor technology is an imaging method for magnetic measurement, forensic investigations and non-destructive testing. The sensor technique enables field analysis and quality assurance of different magnetic materials. Magneto-optical sensors with different measuring ranges are available in standard sizes, customized geometries and as sensor array up to 100 x 100 mm.

Matesy-MAN-MO-Sensor-Instructions

Magneto-optical (MO) sensors are a new and innovative tool for observing the structure of magnetic information in magnetic materials. They can visualize two dimensional profiles of magnetic fields with nearly optical resolution using the Faraday Effect in real time thus allowing to analyze fields by a magneto-optical image. The sensor works in direct contact to the magnetic material. The MO sensor is made up of four layers: substrate, magneto-optical film, mirror and protection layer (Figure 1). The thin mirror layer is been upset on the MO layer to enable a light reflection during the application.

Matesy-DS-MagView

The magview is a magneto-optical device for the fast and accurate visualization of magnetic structures. As a handheld device, the system can be applied for qualitative tests and stray field analyses. The magview visualizes magnetic stray fields, for instance of magnetic stripe cards, magnetic encoders and multi pole magnets.

Magnetic1-Shields-DS0014

Magnetic Shields Very Low Magnetic Field Test Facilities

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor provides measurements of static and alternating fields up to 1mT. Its simplicity makes it ideal for integration into systems using large numbers of sensors in which unit cost is a critical concern.

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor is ideal for integration into large component systems where high performance is essential. It is also suitable for use in projects requiring large numbers of sensors where unit cost is critical.

ew-650B_gmw

EW-650B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EW-632

EW-632 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-502_gmw

EW-502 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-450_gmw

EW-450 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EQ-733L_MS-1381-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 20mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 2mVp-p

EQ-731L_MS-1379-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 65mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 5mVp-p

eq-711l_gmw

EQ-711L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-711l_e

EQ-711L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-432l_e

EQ-432L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-1771_e

EM-1771 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

em-1712_gmw

EM-1712 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

em-1711_gmw

EM-1711 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DTM-133-wGPIB-Manual

DTM-133 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-133-S

DTM-133 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-132-wGPIB-Manual

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DSSIU-6-1U

Fully configurable dedicated 6-channel system interface unit for ultra-stable, high pre-cision fluxgate technology DS series current transducers.Powers up to 6 x DS50 to DS2000 at the same time.Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V)

DS-HTS-110-AG-HF

APPLICATIONS HTS-110’s HF range is suitable for a variety of applications, including: • MOKE (Magneto-Optic Kerr Effect) • Variable Temperature Optical Cryostat • Quantum Hall Resistance Standard • Fourier Transform Mass Spectrometry

DR1481

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0757

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DL2000UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 2000A

DL2000ID-CD100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

DL2000ID-CB100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

CZ-3702

CZ-3702 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3701

CZ-3701 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3700

CZ-3700 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWTUM-Dimensions

Positional accuracy and external currents Due to small variations in the winding density and coil cross sectional area the transducer output varies slightly depending on the position of the current in the coil and also the size of the current conductor relative to the coil.

CWT-Power-Cable-YK

CWT / CWT LFR Power Cable compatible with ALL Yokogawa instruments fitted with Probe Power Option

CWTMini-Dimensions

Introducing the NEW CWTMini50HF,an extension of the CWTMiniHF range for even faster transient current measurement

CWCT-BCM-CW-E

CW Current Transformer Beam Current Monitor for CW beams and macropulses

CT.GMW_.Installation

The Bergoz Instrumentation Current Transformer (CT) provides an accurate, non destructive (non contact), measurement of single or repetitive unipolar or bipolar pulses, or continuous wave.

CQ3203

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2335

CQ-2335 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CPCO-XXXX-160

The CPCO Series (160mm aperture) Current Probes are Clamp On current sensors capable of measuring ac and dc currents. The Current Probe splits along a diameter allowing easy installation to existing cables without having to break the connection. A captive screw is used rather than a clip to ensure consistent closure under mechanical loading or vibration.

CPCO-Technical-Notes

SE Option - The SE stands for Single Ended and the output voltage from the CPCO will have a quiescent output voltage of 5.0V when there is no primary current (IPRI=0A). As the primary current (IPRI) increases in a positive direction, the output voltage will increase to the maximum level of 10.0V at IPRI=IPSAT. When the primary current increases in the negative direction, the output voltage will decrease toward 0.0V at IPRI=-IPSAT

BSS-02B-electronic-interface

BSS-02B-electronic-interface BSS-02B electronic interface

BPS-85-70_30062017

Clip-on Rogowski current probes provide a convenient and accurate means of measuring alternating currents. The latest wideband probes use an innovative shielding technique to eliminate the effects of high electrostatic field strengths in today’s high power-density and high-speed circuits.

BI_MAN_MAG-03PSU-Issue

BARTINGTON MAG-03PSU POWER SUPPLY UNIT OPERATION/MAINTENANCE MANUAL

BI_MAN_MAG03-OCTO-PSU-Issue

BARTINGTON MAG-03-OCTO-PSU POWER SUPPLY UNIT OPERATION/MAINTENANCE MANUAL

BI_mag690_FrequencyResponse_Charts

Mag690 Three-Axis Fluxgate Field Sensor, Amplitude and Phase Response v Frequency

BI_DS_DS0014-MagneticShield

The Bartington Instruments Open-end Magnetic Shield is a three layer mu-metal (an annealed alloy of 80% nickel, 4.5% molybdenum and the balance iron) cylinder that protects its contents from a strong external magnetic field by diverting the lines of magnetic flux around it.

BCM-IHR-manual

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BBM-Schematic

The Ametes Bus Bar DC Current Sensor locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC sense the magnetic field as a function of current on both sides of the bus bar. This enables effective cancellation of external magnetic fields without magnetic cores or shielding which can give rise to non-linearity and hysteresis effects.

BBC

Beam-based methods to measure BPM?s center offset with reference to the pickup center and BPM?s resolution are proposed. Being built in a BPM, the methods provide a BPM verification by its own means.

app-note-cryosaver

CryoSaver current leads employ HTS tape which has anisotropic in-field performance. The current rating decreases much more severely for field oriented perpendicular to the plane of the tape than for field parallel to the plane (either along the long axis or across the width of the tape).

application_notes

All measuring instruments are subject to limitations. The purpose of these application notes is to explain some of those limitations and to help the engineer maximise the many advantages of PEM’s Rogowski current transducers.

AN0039-Mag648-used-for-maritime-perimeter-surveillance

To detect small magnetic field fluctuations caused by movement of nearby ferromagnetic objects, thus indicating the presence of divers or small vessels

AN0025-Mag-03-used-to-measure-solar-weather-from-the-ground

To protect communications, power and other technological systems from unusual solar activity by monitoring solar weather from ground stations.

AN0019-The-application-of-the-Bartington-Fluxgate-Magnetometers-in-TDEM

This note describes an improvement to the TDEM method which will mostly concern mineral exploration, in which the main interest is highly conductive bodies, such as ore bodies. This is articularly the case for exploration for nickel or sulphides.

AN_174KIT-Specification

The AN_174-X KITs provides a convenient method of evaluating the AKM CQ-330X Series SMT current sensing IC’s . There are four versions of the kit available to evaluate the CQ-3300, CQ-3301,CQ-3302 and CQ-3303 sensors. All kits have a maximum continuous current limit of 20Arms .The kits come with the CQ-330X IC and Capacitor mounted and can be used without any additional components.Included are additional parts that can be used by the customer to customize the kit to provide different connection schemes.

AN_134KIT-Spec

The AN_134KIT consists of a EM-3242 angle sensor mounted on a small 0.25 in. square PCB with a 6 in. flat cable. Also included in the kit are three SmCo24 magnets compatible with the angle sensor; a 0.25 in. diameter magnet, a 0.15 in. diameter magnet and a 0.25 in. square magnet. The sensor works well with smaller magnets, but with less air gap. The Sensor incorporates an “Out of Range” detector circuit and will fault the output to zero volts when the magnet’s strength is either too weak or too strong, see Reference Design RD102_EM3242 for details.

AKM-Currentier-Series-Test-PCBs

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

ak8789_e

Features ?High sensitive omnipolar operation ?Dual output ?Micropower operation 　Typ.6.5μA（average:VDD=1.85V） ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

ADI-123G-Users-Manual

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

Adaptors

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-075-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-028

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

A_Mercury-Manual-Final

The Mercury Series chillers are designed to be used per the instructions in this manual. Used in any other fashion it may not perform to specification and may be less safe to operate in general. Failure to heed warnings and instructions listed in this manual may void the warranty, damage the unit, damage other equipment and possibly cause serious personal injury.

18900460_A_1060-62_Probe_Sample_Location

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11901230_F

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

245487

Performance Evaluation and Utility Assessment of Magneto-Optical Sensor Technology for Detecting and Visualizing Obliterated Serial Numbers in Firearms

17900-2236-0-Outline

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2211-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11907-0399-1_A_Gimbal_Mount_3472-70_System

Model 3472 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

11907-0355-0_S3_C_3480_General_Assembly

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5971-160_Reversal_Switch_Users_Manual

USER’S MANUAL MODEL: 5971-160 Current Reversal Switch

5451 Magnet application

To avoid saturation, beam current transformers must be shielded from solenoid, quad and RFQ high stray fields.Good understanding of field distribution, shielding materials and techniques is required. Space availability imposes compact shields along the beam pipe.

5205_Specification

The 5205 electromagnet is a low profile projected vertical field magnet providing uniform Bz field at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible.

5201 sn35 Excitation Vertical Field

MODEL: 5201 PROJECTED FIELD ELECTROMAGNET TEST DATA Hysteresis & AC Excitation

5201 test data hysteresis AC excitation

MODEL: 5201 PROJECTED FIELD ELECTROMAGNET TEST DATA Hysteresis & AC Excitation

SPI Supplies Vacu Prep II™

From the solid-state electronics for precise control and reproducibility to the convenient, easy to use touch screen interface, the Vacu Prep II is designed to be an easy to use instrument. The self-contained turbo molecular pump is capable of quickly reaching vacuum levels of 10-7 torr, while the large baseplate with multiple feed throughs accommodates a variety of fixtures to handle almost any application.

SPI Supplies® Vacuum Greases

The Apiezon family of high vacuum greases are known the world over for their high quality, consistency and excellent compatibility for high vacuum applications. The Apiezon hydrocarbon greases are silicone and halogen free so there is never a risk of Si contaminating the microscope column. Most are made of pure hydrocarbon materials.

SPI Supplies Wet Cell II

The Wet Cell II is the next generation device for the examination of liquids in an EM environment.The self-contained high vacuum compatible device enables the analyst to characterize a fluid in its natural state. And as it is a self-contained device, there is no need for modification of the existing microscope. Once the liquid is loaded into the device platform, it is inserted into the microscope and is ready for analysis.

5001/5002-AB Silver Paint

The SPI #5001-AB and #5002-AB Silver Paint Product (the same product in two different size bottles) is a highly concentrated suspension (43% ±3% silver solids) of specially prepared and tightly controlled high purity silver powder combined with a highly effective organic suspending and binder system.

Hookupz 2.0 Universal Smartphone Optics Adapter

Now you can digitally record and capture everything you see through your optical device and share instantly via text, email or social media. This adapter allows you to connect your smartphone to most any optic: microscopes, stereoscopes, inoculars, monocular, spotting scopes, telescopes, borescopes, slit lamps, night vision, and more!

Apiezon AP101 Grease MSDS

Apiezon AP101 is an excellent generalpurpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. The key features of AP101 are shown in the table opposite.

美国ARS公司CS204AI-FMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

美国ARS公司CS202AI-DMX-1SS高效型闭循环无液氦低温恒温器

典型特点 l 无需消耗制冷剂 l 更高真空的不锈钢焊接结构 l 1.25 英寸的大光学窗口 l 大样品视角利于光学采集(F/.8) l 可任意方向操作 l 可根据客户要求进行定制 可选配置及升级选项 l 4 K 冷头 l 5.5 K 冷头 l 450 K高温台 l 800 K 高温台 l 可定制温度计结构 l 可定制接线结构 l 可定制窗口材料 l 可定制样品座