美国ARS超稳无液氦低温恒温器-udrift

镍铬加热器线

 镍铬加热器线（Nichrome heater wire）用来绕制低温加热器。 线径32AWG(0.203mm),成分： 80% 镍（Nickel），20% 铬（Chromium）； Polyimide 绝缘最高操作温度500K。

In Situ X‑Ray Diffraction Study on Hydrate Formation at Low Temperature in a High Vacuum

The condition for incorporating simple gases with H 2 O to form clathrate hydrates in protosolar nebula is a subject of topical interest. Methane and carbon dioxide clathrate hydrates have been speculated to exist in outer solar system bodies, but they have eluded direct detection so far. We have constructed a low-temperature and high-vacuum system to prepare and study clathrate hydrates by in situ synchrotron X-ray diffraction experiments.Upon heating, we found clathrate hydrates can be obtained from the codeposition of methane or carbon dioxide with water outside the equilibrium thermodynamic stability region under high vacuum. We suggested that the hydrate formation is assisted by the phase transformations in the ice, which provide the necessary activation energy to increase the mobility of the guest and water molecules. The results provide a new perspective on how “metastable” gas hydrate can be formed.

顺磁共振用低温指状杜瓦

ER 167 FDS-Q Finger dewar For particular, applications, like detection of nitroxide(N0), the nitrogen finger dewar, ER 167 FDS-Q, is the method of choice. The finger dewar minimizes sample preparation time and experimental set-up. The sample temperature is at 77K

碳陶瓷低温温度计

CCS低温温度计 Temati是全球范围内的碳陶瓷低温温度计批发商，碳陶瓷低温温度计在低温温度计量的所有领域都有应用。碳陶瓷温度计发明于1976年，到现在已经有超过10000个碳陶瓷温度计在世界范围内成功应用。

DS-LT3M UHV Flow Cryostat for Manipulation

The ARS manufactured LT3M Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats, the LT3M is an advanced liquid helium flow cryostat utilizing many unique features, such as the matrix heat exchanged and the coaxial shield flow transfer line to achieve unparalleled efficiency and ultra low vibration levels. The combination of True UHV and angstrom level vibrations makes the LT3M ideal for low temperature application. The extended length and addition of a rigid support tube allow for cleaving and manipulation.

CryoCon-Users-Guide

The Model 12i / 14i / 18i monitors may be powered by any source providing 7.5 to 48 Volts AC or DC. The IEEE 802.3af Power over Ethernet (PoE) specification is also upported, allowing these units to be powered by its local area network connection. In addition, the Model 18i has eight input channels whereas the Model 14i has four and the Model 12i has two. The instruments are identical in every other way. Each input is independent and is capable of supporting the same wide range of sensor types. Inputs are not scanned or multiplexed.

Si43510uATypResp

Model SI-435 Silicon Diode Temperature Sensors Si-435 Silicon Diodes from Scientific Instruments offer the industry’s highest 4K accuracy in an interchangeable/uncalibrated diode temperature sensor. The CAP package is the smallest encapsulated diode mount on the market while the SMD package offers the utility of a compact surface mount. Individually calibrated options are available where millikelvin accuracy is required.

Model RO-600(1K) – Ruthenium Oxide RTD – RuO Thermometer from Scientific Instruments

The Model RO-600 Ruthenium Oxide Temperature Sensors are thick film resistors which adhere to are available with calibration down to 20mK or grouped/interchangeable and have a nominal resistance of 1,000? at ambient temperature. The ruthenium oxide temperature sensor offers excellent performance characteristics in magnetic field environments. These sensors exhibit an initial small negative magnetoresistance at temperatures below 250 mK at low fields (less than about 1.5 Tesla). The magnetoresistance then becomes positive at larger fields and increases at lower temperatures. This magnetoresistance is repeatable. For example, a resistance change of 8% induced by an 8 Tesla field at a temperature of 80 mK corresponds to a temperature error of 7 mK.

Cryogenic Temperature Multi-Channel Monitor Model 12i / 14i / 18i

The Model 12i / 14i / 18i monitors may be powered by any source providing 7.5 to 48 Volts AC or DC. The IEEE 802.3af Power over Ethernet (PoE) specification is also upported, allowing these units to be powered by its local area network connection. In addition, the Model 18i has eight input channels whereas the Model 14i has four and the Model 12i has two. The instruments are identical in every other way. Each input is independent and is capable of supporting the same wide range of sensor types. Inputs are not scanned or multiplexed.

SCM10 Single Channel Temperature Monitor

SCM10 Single Channel Temperature Monitor The SCM10, single channel temperature monitor, is a compact, reliable instrument capable of providing extremely accurate measurements for a variety of applications. The unit supports diode and RTD sensors and it can be configured for the appropriate sensor type using the front panel or the utility software.

我司在深圳某高校成功安装美国ARS超高真空高效单级制冷机

近日在深圳某高校成功安装美国ARS（ADVANCED RESEARCH SYSTEMS）超高真空高效单级制冷机。

我司在上海某研究所成功进行了美国ARS低温恒温器与Huber设备集成

近日我司在上海某研究所成功进行了美国ARS（ADVANCED RESEARCH SYSTEMS）低温恒温器与Huber设备集成。

VIS-Datasheet-T56-250C_v1_1

The T56-250C is a high speed transimpedance amplifier (TIA) IC designed for use by 56G receiver modules in fiber optic transmission systems. The T56-250 operates from a single +3.3 V supply typically dissipating 250 mW of DC power and is designed for the use with PIN photodetectors in a wire-bond assembly The IC has a single-ended input (IN) and a differential output (OutP, OutN). It includes the cathode connection for the photodiode (Cath) as well as a bias path through the internal pin (PD). The TIA features input/output DCoffset cancellation and is equipped with various analog control pins (NoXing, Vxing, Vmod and BW) which allow for zero-crossing adjustment, gain and peaking control.

VIS-Datasheet-A50-300C

The A50-300C is a high speed driver IC designed for use with electro-optical modulated VCSEL for up to 56 Gbit/s in fiber optic transmission systems. The A50-300C operates from a single +5V supply typically dissipating 380mW of DC power. The device is available as engineering sample.

OPERATION AND MAINTENANCE INSTRUCTIONS

AMI HELIUM VAPOR COOLED CURRENT LEADS AND SUPERCONDUCTING BUS BARS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS

current_leads

American Magnetics Inc.’s (AMI) Vapor Cooled Current Leads provide reliable and consistent electrical current transfer from room temperature (300K) to a Liquid Helium environment (4.2K). These high efficiency heat exchangers use the heat capacity of cold helium vapor to counterflow the incoming conductive and resistive heat, thereby minimizing the liquid helium consumption. The thermal input of the leads is carefully designed to insure that just enough helium gas is generated to provide adequate cooling across the full range of operating currents. AMI offers a wide range of current lead designs from small current requirements to over 100,000 Ampere leads.

Cryogen_Free_Magnets_Info_Brief

The simplest magnet system is one where a sample insert has a small 6T magnet bolted at the bottom. Such an insert would have an integral variable temperature insert with sample space of 25 mm. These inserts are very effective in performing transport studies on nano size specimens and can be a useful tool to demonstrate the Quantum Hall Effect for educational purposes or for prescreening samples before they are tested at facilities that are not easily accessible.

LT4B

The ARS manufactured LT4B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. The LT4B is our lowest cost liquid flow UHV cryostat. The LT4B works with either Liquid Helium or Liquid Nitrogen. The LT4 utilizes a standard transfer line and cold tip. In order to upgrade to our coaxial shield flow transfer line and angstrom level vibrations, you need to take a look at the high performance LT3B.

我司在南京某高校成功安装低温恒温器

近日我司在南京某高校成功安装美国ARS（ADVANCED RESEARCH SYSTEMS）的低温恒温器。

我司在南京某大学低温真空探针台成功维护

近日我司在南京某大学对美国ARS（ADVANCED RESEARCH SYSTEMS）的低温真空探针台成功维护。

我司在深圳某高校成功进行了美国ARS的PS-CC闭循环探针台安装与验收

近日我司在深圳某高校成功进行了美国ARS（ADVANCED RESEARCH SYSTEMS）的PS-CC闭循环探针台安装与验收

RMP Flyer German / English

Der RMP Rotormessplatz ist ein universelles Messsystem zur Erfassung der Eigenschaften von Permanentmagnet-Rotoren. Steuerbare Achsen, eine präzise Mechanik und kalibrierte 1- bzw. 3-achsige Hall-Sensoren bis zu 1 Tesla zeichnen den RMP aus.

layer-tester Flyer German

Der Layer Tester wurde entwickelt, um die jeweiligen Beschichtungen auf Floatglas zu unterscheiden. Das Gerät arbeitet mit zwei verschiedenen Widerstandwerten und erkennt so sicher und schnell, welche Beschichtung auf das Glas aufgebracht wurde. Der Layer Tester ist Batteriebetrieben und intuitiv in der Anwendung. Sobald die in das Prüfgerät integrierten Kontaktspitzen mit dem Prüfglas in Berührung kommen, wird über zwei LEDs das Messergebnis angezeigt. Unterschieden wird dabei zwischen den beiden Flächenwiderstandsbereichen 0 bis 15 ?sq (low resistance) und 22 bis 60 ?sq (high resistance).

Helmholtz Spulen Flyer German

Eine von Matesy’s Kernkompetenzen ist die Abwicklung von Entwicklungsprojekten. Mit Ihnen gemeinsam erarbeiten wir einen konkreten Lösungsansatz, fertigen ein System anhand Ihrer Bedürfnisse und unterstützen Sie bei der Implementierung.

m-axis Flyer English

m-axis is a measurement system to investigate the magnetic specifications of permanent magnets (magnetization angle and magnetic moment). Due to the modular setup it is possible to customize the measurement range of the m-axis system in addition to the four standard ranges and for 100% quality control.

m-axis Flyer German

m-axis is a measurement system to investigate the magnetic specifications of permanent magnetsm-axis is a measurement system to investigate the magnetic specifications of permanent magnets(magnetization angle and magnetic moment). Due to the modular setup it is possible to customizethe measurement range of the m-axis system in addition to the four standard ranges and for 100% quality control.

导电银环氧树脂胶EPOXY H20S 1OZ/组

EPO-TEK®H20S是EPO-TEK®H20E的改良版，主要用于芯片键合的模具冲压和点胶技术。 EPO-TEK®H20S是一种高度可靠，双组份的银填充环氧树脂，具有光滑触变粘稠性。 除了高导电性，短的固化周期，证明的可靠性，以及方便的配合比以外，EPO-TEK®H20S的使用是非常简单。

HVG

低温用道康宁真空脂 特性 • 良好的润滑性能和密封性能 • 低挥发性 • 优良的耐水性、耐化学品性能及耐高温和低温性能 组成 • 硅油 • 增稠剂 应用 • 化工设备的密封和润滑油脂 • 用于活塞阀、控制阀、流量计轴承、陶瓷活塞阀、灭火器阀门、水设备阀门、合成橡胶垫圈及密封圈在高温下使用时的润滑 • 真空和压力系统的密封用润滑油脂 • 用于双筒望远镜中O型环的润滑，防止精密镜头起雾

ScanningTunnelMicroscopy扫描隧道显微镜(STM)

扫描隧道显微镜(STM)是在扫描探针显微镜(SPM)领域发展起来的最早的技术。它生成的成像表面具有原子分辨率，横向分辨率为~ 0.1 nm，深度为~ 0.01 nm。STM 的原理是基于量子隧穿。在进行测量时，由于探针非常接近表面，所以有一个导电的尖头。同时，在探针和样品之间施加电压偏置，使电子通过空间隧道。所得到的图像是叶尖在样本表面上扫描时叶尖高度的变化。结果图像是在样品表面上扫 描尖端时尖端高度的变化。

ScanningElectronMicroscopy扫描电子显微镜(SEM)

扫描电子显微镜(SEM)是检测样品表面形貌和成分的最通用的仪器之一。表面图像是由聚焦的电子束与样品中的原子相互作用而得到的，可以达到<1nm 的分辨率。相互作用产生的信号包括次级电子(SE)、 背散射电子(BSE)、特征x 射线和阴极发光、吸收电流和透射电子。SE 是扫描电镜检测到的最标准的信号。它的能量很低，所以分辨率很高。BSE 发生在样品内部更深的地方，与原子序数密切相关。它通常与特征X 射线光谱一起用于成分分析。许多扫描电镜测量是在样品台冷却到低温时根据不同的样品性质进行的。

AtomicForceMicroscopy(AFM)

Atomic Force Microscopy (AFM) is one of the methods of scanning probe microscopy (SPM), which is a collective technique to measure local properties, e.g., height, friction, and magnetism. AFM consists of a sharp tip at the end of a cantilever as the probe, which is normally 3-6 μm tall pyramid and 15-40 nm end radius, to measure the force between the tip and the sample surface.

Time-DomainThermoreflectance

Time-domain thermoreflectance (TDTR) is one of the most powerful methods to measure the thermal properties, most importantly thermal conductivity, of a wide range of bulk and thin film materials and their interface. The principle is to take advantage of the change in the reflectance of the surface to derive the thermal properties when a material is heated up. The set-up includes a pump and probe pulsed-lasers. The pump laser is utilized to generate acoustic pulses. The acoustic pulses could be at a transmittance or reflectance state at an interface, depending upon the properties of the interface. The probe laser will detect the reflecting acoustic pulses through a photodetector.

Time-DomainThermoreflectance时域热反射测量法(TDTR)

时域热反射测量法(TDTR)是测量各种块状和薄膜材料及其界面热导率的最有效方法之一。其原理是利用表面反射率的变化来推导材料被加热时的热特性。该装置包括一个泵和探针脉冲激光器。利用泵浦激 光器产生声脉冲。声波脉冲可以在界面处处于透射或反射状态，这取决于界面的属性。探针激光通过光电探测器探测反射的声脉冲。从而可以测量反射率随时间的变化，并且通过匹配理论模型来提取热特性。对温度依赖的TDTR 可以借助低温恒温器来研究电子和声子等载流子输运过程的基本物理。

RamanScattering

Raman spectroscopy is a technique to detect the vibrational or rotational modes of lattice or molecules. There are two types of scattering, Rayleigh scattering, and Raman scattering. Rayleigh scattering is elastic, and Raman scattering is inelastic. When Raman scattering occurs, there is energy differentiate between the incident photons and scattered photons. Raman spectroscopy exhibits this energy differentiate, which corresponds with the specific vibrational or rotational mode of lattice or molecules. Therefore, it is commonly used to identify and analyze the structure and composition of the sample. It also can be combined with a microscope to observe single nanostructures or microscopic areas called micro-Raman spectroscopy.

RamanScattering拉曼散射

拉曼光谱是一种检测晶格或分子振动或旋转模式的技术。有两种类型的散射，瑞利散射和拉曼散射。瑞利散射是弹性的，拉曼散射是非弹性的。当拉曼散射发生时，入射光子和散射光子之间存在能量差异。拉曼光谱显示出这种能量差异，它与晶格或分子的特定振动或转动模式相对应。因此，常用来识别和分析样品的结构和组成。它还可以与显微镜结合来观察单个纳米结构或称为微拉曼光谱的微观区域。

Photoluminescence

Photoluminescence (PL) spectroscopy is a widely used technique for the characterization of the optical and electronic properties of semiconductors and molecules. PL is a process of light emission from any form of matter after the absorption of photons. The incident photon in the visible region excites one of its electrons to the excited state. And then, it radiates a photon as the electron return to the lower energy state. In quantum mechanics, the energy band is quantized, which means only certain transitions are allowed. Therefore, the discontinued energy peaks of luminescence are expected.

PhotoelectricEffect

When light illuminates a material, due to the energy transfer from the light to the carriers in materials, electrons will be ejected from the surface. This effect is called the photoelectric effect, and the emitted electrons are called photoelectrons. According to experiments, the results show that only the light that exceeds the threshold frequency can generate photoelectrons. Below that threshold, no electrons are emitted from materials. That threshold is called the work function, which is attributed to the electron binding energy. The photoelectric effect experiments are commonly performed on quantum devices for characterization at cryogenic temperatures.

MössbauerSpectroscopy

Mössbauer spectroscopy is a spectroscopic method to detect a slight change in energy levels of an atomic through recoil-free resonant absorption and emission of gamma rays in solids. Typically, chemical shift,quadrupole splitting, and hyperfine splitting can be observed. Due to the narrow linewidth of gamma rays,Mössbauer is extremely sensitive in terms of energy resolution. In the resulting spectra, the gamma-ray intensity is plotted as a function of the source velocity. At velocities corresponding to the resonant energy levels of the sample, a fraction of the gamma rays are absorbed, resulting in a drop in the measured intensity and a corresponding dip in the spectrum. The absorbing nuclei and sample can be characterized by the number, positions, and intensities of the dips in the spectrum. Recently, some charge state and electronic configurations have been confirmed through Mössbauer spectroscopy at cryogenic temperatures.

MössbauerSpectroscopy穆斯堡尔谱光谱学

穆斯堡尔谱是一种通过固体中伽玛射线的无反冲共振吸收和发射来探测原子能级微小变化的光谱方法。通常可以观察到化学位移、四极分裂和超精细分裂。由于伽马射线的线宽很窄，穆斯堡尔对能量分辨方面非常敏感。在得到的光谱中，伽马射线强度是源速度的函数。在与样品的共振能级相对应的速度下，一部分伽马射线被吸收，导致测量到的强度下降，光谱也相应下降。吸收原子核和样品可以用光谱中凹陷的数目、位置和强度来表征。近年来，一些电荷态和电子组态已经通过低温穆斯堡尔谱得到了证实。

MatrixIsolation

Matrix isolation is a spectroscopic study to maintain materials (guest particles) in an inert medium (host matrix) at very low temperatures. It was developed because it’s difficult to obtain gas-phase infrared spectra due to its high chemical reactivity of transient molecules. The mixture of guest particles and the host matrix is deposited on a transparent window, which will be cooled below the melting point. Experiments must be performed under a high vacuum to prevent contaminants from unwanted gases freezing to the cold window.Lower temperatures are preferred, due to the improved rigidity and "glassiness" of the matrix material. Noble gases are normally used to dilute guest samples, such as argon, not just because of their unreactivity but also because of their broad optical transparency in the solid-state.

MatrixIsolation基质隔离

基质分离是一种光谱研究，旨在将材料(客体粒子)置于极低温的惰性介质(宿主基质)中。它的出现是基于瞬态分子的高化学反应性，很难获得气相红外光谱。客体粒子和主基质的混合物沉积在一个透明窗口上，该窗口将被冷却到熔点以下。所以实验必须在高真空下进行，以防止有害气体中的污染物冻结到冷窗上。

Magneto-OptoKerrEffect

Magneto-Opto Kerr Effect (MOKE) is a technique to investigate the magnetization structure of materials by the change in intensity and polarization of reflected light from the magnetized surface. MOKE is one of the magneto-optic effects. Kerr effect, investigating reflected light, is similar to the Faraday effect, which is to detect the transmitted light. Upon the direction of the magnetization vector with respect to the reflecting surface and the incident plane, there are polar MOKE, longitudinal MOKE, transversal MOKE, and quadratic MOKE. In addition, low-temp MOKE helps characterize superconductor/magnetic materials in terms of current density and magnetic flux distribution.

Fourier-TransformInfraredSpectroscopy(FTIR)傅立叶变换红外吸收光谱学

当样品暴露在红外辐射下时，通过吸收特定波长的辐射激发偶极矩。振动能量将从基态激发到激发态。与色散光谱学不同，傅立叶变换红外外吸收光谱（FTIR）同时包含多个光频率并测量吸收。接下来，光束包含不同频率的光并重复它。重复几次后，原始数据将被处理为结果数据cm-1，wavenumber。这个过程称为傅立叶变换。

Ellipsometry

Ellipsometry is an optical method to derive the dielectric properties of thin films. Polarized incident light is reflected obliquely from the surface of the sample to generate ellipse of polarization reflected light in terms of amplitude ratio and phase difference, which is measured by a spectroscopic ellipsometer. Information about composition, roughness, thickness, doping concentration and other material characters can be yielded through it. Intrinsic physical properties of thin films can also be studied by the temperature dependence of ellipsometry.

Ellipsometry椭圆偏振技术

椭圆偏振法是一种测量薄膜介电特性的光学方法。偏振光从样品表面斜反射，产生偏振反射光的振幅比和相位差椭圆，用椭圆偏振光谱仪测量，成分、粗糙度、厚度等信息，通过它可以得到掺杂浓度和其它材料特性。薄膜的本征物理性质也可以用椭偏仪的温度依赖性来研究。

Angle-ResolvedPhotoemissionSpectroscopy(ARPES)角分辨光电子能谱

角分辨光电子能谱(ARPES)是一种用于获取晶体在倒易空间中的电子带结构和费米表面信息的光发射光谱法。用软X 射线辐照晶体表面，测量了表面发射的光电子动能随极角和方位角的变化。因为从表面逸出的电子通过表面投射，垂直于表面的动量方向不守恒。因此，RPES 是二维材料的理想工具，因为感兴趣的电子动量方向与表面平行。通过降低低温下的热能，可以提高激发的灵敏度。

DiamondAnvilCell

Diamond Anvil Cell (DAC) is an experimental component that generates extreme pressure by compressing a small piece of material with two opposing diamonds. The pressure can normally go up to 100-200 GPa. The goal of this technique is to simulate the deep inside planet environment to synthesize materials and observe phases that don’t happen under normal ambient atmosphere. The sample is able to be viewed through diamonds and also allows optical measurements, such as X-ray diffraction, Mössbauer, and photoluminescence. Commonly, the sample can be heated by resistance heating up to 1000 °C or laser heating up to 5700 °C. DAC experiments also can be operated at cryogenic temperatures for different purposes.

ThermoelectricEffect热电效应

热电效应是热和电之间的关系。当器件的两侧产生温差时，材料中的载流子从热的一端扩散到冷的一端，从而在期间上产生电压。相反，当施加电压时，热量从一端传递到另一端，行程温度梯度。热电效应一般由塞贝克Seebeck 效应、佩尔蒂埃Peltier 效应和托马森Thomason 效应三种效应组成。

Magnetotransport

When quantum materials, especially 2D materials or multilayers, are subject to the magnetic field during the electron transport at low temperatures, the trajectory of the electrons and the electronic spins need to be taken into account. Quantum Hall effect, a quantum mechanical version of the Hall effect, is one of the phenomena. It is frequently used to characterize modern quantum materials with magnetoresistance.Magnetoresistance is a phenomenon of change in the resistance when a sample submitted to a magnetic field.When a sample contains ferromagnetic metals, the interplay of the magnetization of the sample and spin-polarized current is involved. The electrical resistance may chance through magnetoresistance effects that originate from different physical phenomena, such as giant magnetoresistance and tunnel magnetoresistance effects, which lead to the subject of Spintronics.

ElectronTransport

In classical physics, when an electric potential is applied through a bulk of metal or semiconductor, carriers will be driven. The electrical resistance can be obtained by Ohm’s law. This effect is called electron transport. This is one of the most common techniques to characterize materials. Many of the phenomena can be observed through this echnique, such as electrical conductivity, electron mobility.

IonTrap离子阱

离子阱是一种通过磁场或电场将离子/带电粒子限制在一个有限空间内的科学技术。人们对离子阱法进行了许多研究，如捕获离子的光谱性质和碎片离子的质谱性质。目前离子阱最常见和最基本的三种设计是Penning 陷阱(使用四极电场和轴向磁场)、线性阱(使用二维射频四极场)和Paul 陷阱(使用三维四极场)。特别是Paul 陷阱经常被用来进行量子态操纵，这使得离子阱在量子计算机广泛应用。特别是在低温下，离子阱的长存储和相干时间是量子计算和光学时钟应用所必需的。

Parahydrogen仲氢

仲氢是氢(H2)的两种磁性形式之一。它通常用于提高核磁共振和核磁共振测量的灵敏度。 氢分子由两个原子组成。每个原子都有一个旋转的原子核。根据核自旋的方向，氢原子有两种类型。 如果两个氢原子原子核的自旋是平行的，那它就是正氢。如果自旋是反平行的，它就是仲氢。一般来说，氢气是正氢和仲氢的平衡混合物。这两种磁态之间有微小的能量差。

NobleGasAnalysis惰性气体分析

惰性气体，也就是氦(He)、氖(Ne)、氩(Ar)、氪(Kr)、氙(Xe)形成了一组性质相似的化学元素，如无味、无色和单原子。最重要的是，它们在化学上不发生反应。因此，它们也被称为惰性气体。由于惰性气体的化学和生物惰性以及放射性衰变所产生的独特同位素特征，惰性气体通常被用于探测海洋和地球过程，例如岩石和矿物年代测定。

ElectronParamagneticResonance(EPR)ElectronSpinResonance(ESR)电子顺磁共振电子自旋共振

电子顺磁共振(EPR)/电子自旋共振(ESR)是研究有机和无机自由基、过渡金属配合物和一些生物分子中未配对电子的重要方法。当具有不成对电子自旋的顺磁性化合物在磁场和电磁波(通常在微波频率范围内)作用下，就会诱导自旋态之间的跃迁。测量一般是在恒定频率下进行，而磁场是变化的。EPR/ESR 光谱仪测量电磁辐射的吸收。 由于电子自旋的弛豫时间短，EPR/ESR 必须在低温下进行。

X-rayDiffraction

X-ray Diffraction (XRD) is a technique to determine the atomic and molecular structure of a crystal based on Bragg diffraction. X-rays are commonly used to produce the diffraction pattern because their wavelength is typically the same order of magnitude (1–100 angstroms) as the spacing d between planes in the crystal. The information on the intensity and angle of the diffractive X-rays can produce a 3D picture of the density of electrons within the crystal, which leads to the mean positions of atoms as well as chemical bonds, disorders, and other information. If it’s a single crystal sample, it’s usually mounted on a goniometer, which can position the sample at selected orientations. The benefits of the low-temperature XRD are to reduce the radiation damage and thermal motion. Low-temperature XRD also helps characterize superconductor materials.

X-rayDiffractionX射线衍射

x 射线衍射(XRD)是一种基于布拉格衍射来测定晶体原子和分子结构的技术。x 射线通常被用来产生衍射图样，因为它们的波长通常与晶体中平面间距d 的数量级相同(1100 埃)。 衍射x 射线的强度和角度可以产生晶体内电子密度的三维图像，从而得到原子的平均位置以及化学键、紊乱和其他信息。 如果是单晶样品，通常安装在测角仪上，测角仪可以将样品定位在选定的方向上。低温XRD 的优点是降低了辐射损伤和热运动。 低温XRD 也有助于表征超导体材料。

NeutronScattering

Neutron scattering is utilized to understand the properties of materials on the atomic scale. The benefits of the neutron scattering are to have similar wavelengths to the spacing between atoms, similar energy to atoms, no charge to avoid strong scattering by charges to penetrate more deeply into the matter, scattered similar extent by light and heavy atoms, and suitable magnetic moment for magnetism measurement. Neutron scattering produces prominent interference and energy transfer effects because neutrons interact primarily with the nucleus, not electron cloud surrounding it in XRD. Nowadays, neutron studies of quantum materials are commonly used for the development of IT technology and superconducting materials. At cryogenic temperatures, the energy distribution of the neutrons can be shifted to the lower energy end of the spectrum. Interesting neutron scattering phenomena are also commonly discovered at low-temperature.

NeutronScattering中子散射

中子散射技术利用中子散射方法研究物质的静态结构及物质的微观动力学性质。中子具备不带电、穿透力强、可鉴别同位素、较之X 射线对轻元素灵敏、具有磁矩等优点，因此中子散射技术作为一种独特的、从原子和分子尺度上研究物质结构和动态特性的表征手段，在多学科交叉领域发挥着不可替代的作用。

Linear Rotary Feedthroughs

Precision Linear Feedthroughs — Welded bellows shaft seal with 1, 2 and 4 Inch linear travel lengths. Precision Rotary Feedthroughs — Welded bellows shaft seal with 360° plus, continuous rotational travel. Economy Rotary Feedthroughs — Elastomer shaft seal with 360° continuous manual rotational travel. Actuator Options — DC Stepper, AC motorized, and pneumatic actuator options available.

Viewport Glass Components

Low Profile — Low profile high transmission glass viewports available with 0.56 to 2.69 view diameters. Wide Range — Sapphire, fused silica, Accu-Sol™ and 7056 borosilicate glass substrate types offer a wide range of transmission options. Demountable Substrate — Unique “demountable” viewport design available to allow end users the option of having the viewport coated. This demountable design also allows for ease of cleaning and/or replacement.

Pressure Relief Busrtdisc

Low Pressure Burst Discs — One-Time-Use, 9~11.5 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. High Pressure Burst Discs — One-Time-Use, 15~25 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings. PRV TM Pressure Relief Valves — Adjustable and reusable, 0.5~2 PSI maximum relief pressure available on CF, ISO KF flanges, and NPT pipe thread fittings.

我司在西安某高校成功进行了美国ARS低温恒温器与Horiba光谱仪耦合

近日我司在西安某高校成功进行了美国ARS （ADVANCED RESEARCH SYSTEMS）低温恒温器与Horiba光谱仪耦合。

Thermocouple Feedthroughs

Type-K — Offers broadest temperature range (-200°C to +1250°C), and is the most widely used thermocouple type. For these reasons Accu-Glass supports Type-K with feedthroughs having Chromel® and Alumel® pins and mating contacts for maximum accuracy. Matched pin material for Type-T, J, E, S, R and C thermocouple are not available. Use of standard instrumentation feedthroughs with gold-plated nickel-iron alloy pins, and goldplated copper alloy contacts are offered instead. The error introduced using these pins and contacts is less than 2%. Cable Assemblies — Air side and UHV cable assemblies for all thermocouple types. Refer to specific cables for construction details.

Power Feedthroughs

Power Feedthroughs — Hermetic glass-to-metal seal feedthroughs are designed to meet Mil-DTL-5015 Circular and industry standard Subminiature-D configurations. Ceramic seal high power feedthroughs provide three high power feedthrough options. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies using compatible materials such as PEEK, ceramic, Kapton® insulated wire and stainless steel are just some of the vacuum compatible materials used to provide complete in-vacuum wiring. Air-service Cable Assemblies — Industry standard cables and connectors are utilized to provide the end user with complete connectivity solutions from bench equipment to the feedthrough flange.

Instrumentation Feedthroughs

Electrical Instrumentation Feedthroughs — Hermetic glass-to-metal seal feedthroughs are designed to meet Accu-Glass Products standard Subminiature-C™, Mil-DTL-26482 Circular and industry standard Subminiature-D configurations. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies using compatible materials such as PEEK, Kapton® insulated wire, stainless steel and DAP are just some of the vacuum compatible materials used to provide complete in-vacuum wiring. Air-service Cable Assemblies — Industry standard cables and connectors are utilized to provide the end user with complete connectivity solutions from bench equipment to the feedthrough flange.

Accessories

Connectors Vacuum Connectors & Cable Assemblies Kapton Insulated Wire Insulators & Spacers

我司在北京某高校成功安装美国ARS用于瞬态光栅的超稳型低温恒温器

美国ARS是一家世界级低温系统生厂商，创立于1986年，致力于为科研工作者提供1.5-800K低温解决方案。 ARS以研发为重点，生产的低温设备随着科学研究领域的不断变化而不断发展，为您提供最先进的低温设备。 ARS在全球拥有训练有素销售及技术团队，为客户提供售前售后技术支持，并以合理的价格为客户选择适合客户需求的低温设备。X20-OM超低振动超精细闭循环恒温器是特别为光学显微实验设计，如显微-光致发光(Micro-PL)，显微拉曼等。

我司在深圳某高校成功安装美国ARS显微拉曼用超稳型低温恒温器

X-20-OM超低振动超精细闭循环恒温器是特别为光学显微实验设计，如显微-光致发光(Micro-PL)，显微拉曼等。 X-20-OM系列恒温器使用氦气交换冷却样品，系统振动级别仅为3-5nm,样品处最低温度可达3.5K，最高温度可达800K。

LT4-FTIR

LT4-FTIR系列连续流恒温器是性价比高的FTIR连续流恒温器，专门用于FTIR低温测试。 LT4-FTIR既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。

LTR

LTR专为X波段EPR和ESR测量而设计。 通过石英比色皿内的液氦射流冷却样品。 我们提供符合Bruker、Varian和JEOL腔体的玻璃器皿。

X-19-NO非光学低温恒温器

X-19-NO是顶端装载样品的非光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。

X-12窄窗型闭循环低温恒温器

X-12系列闭循环低温恒温器专为霍尔，磁性，磁光，光电测试设计。独特的窄窗设计使得该款恒温器同样适用于电磁和磁性测试。 为满足在磁场环境下使用，改款恒温器大大缩小了真空罩的尺寸以满足其能伸入到磁铁的窄缝中。

B-UHV型闭循环低温恒温器

B-UHV系列闭循环低温恒温器是真正的UHV真空系统，真空度可达10-11 Torr，与其他产品不同的是该产品全部用焊接接头及金属密封代替了橡胶O圈密封。在制冷机上直接焊接了一个CF法兰。 B-UHV系列恒温器的冷头可烘烤到80℃，移除冷头置换器之后可以烘烤到200℃。 B-UHV系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

LN-400液氮储槽型恒温器

LN400液氮储槽型恒温器是经济连续流恒温器，可进行光电磁各种低温测试。 LN400使用液氮进行工作，工作温度77K至500K（高温可到800K），结构可根据客户需要进行定制。

LT4连续流低温恒温器

LT4系列连续流恒温器是经济连续流恒温器，可进行光电磁各种低温测试。 LT4既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。

±1T磁场强度下显微光学测试

典型特点：灵活性高，降温时间更短，换样方便 这套系统尾部可以最多可加5个窗口，样品处真空罩宽度19mm。（配合电磁铁可以获得高于1T的磁场强度） 该套样品处最低温度小于8K。（可连续变温，也可升级制冷机获得更低温度） 超低振动：恒温器固定安装振动3-5nm，恒温器配移动支架振动优于500nm。

我司在中国科学技术大学顺利完成美国ARS公司的专门用于ARPES系统的超高真空型(UHV)低温恒温器验收工作

近日我司在中国科学技术大学顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）公司的超高真空型低温恒温器验收工作，该款低温恒温器为完全无液氦系统，搭配客户超高真空腔室使用，可实现低温下三维移动及旋转，真空度可达10-9pa，配备额外305mm延长冷指，最低温度4.6K。

我司在中国科学院福建物质结构研究所顺利完成美国ARS标准型无液氦低温恒温器升级验收工作

近日我司在合中国科学院福建物质结构研究所顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）标准型无液氦低温恒温器升级验收工作，该款低温恒温器与爱丁堡（Edinburgh Instruments）光谱仪FLS980 无缝匹配。

ARS水冷机

美国ARS 水冷机   标准电压  频率 60 Hz 50 Hz 最小 200 V 200 V 最大 230 V 230 V 制冷量 3.9 kW 3.9 kW

我司在香港浸会大学顺利完成美国ARS高低温超宽温区低温恒温器验收工作

近日我司在香港浸会大学顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）高低温超宽温区低温恒温器验收工作，该款低温恒温器为完全无液氦系统，温度测试范围从10K-800K，为客户的光电测试提供了超宽的温区操作，是宽量程测试的首选。

X-3管状闭循环低温恒温器

X-3管状闭循环低温恒温器尾部为管状结构，尾部空间可以设计得更加紧凑，适合插入更狭小的空间，如超导磁体或电磁铁中，非常适合磁化率或霍尔测试。另外X-3恒温器没有光学窗口，减少了热辐射，降温更快。 X-3恒温器的尾部可以根据客户要求定制成不锈钢或铝制材质。 X-3系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

X-1SS高效型低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

LT3液氦流型低温恒温器

LT3管状连续流低温恒温器应用十分广泛，拥有很多独特特点，如热交换型液氦传输管线可以提高制冷效率而且极大的消除振动。 LT3恒温器拥有不锈钢仪表群，独特的双O圈设计使它易于安装，校准，移除真空外罩。

LT3B-OM UHV显微型连续流低温恒温器

LT3B-OM 恒温器专为UHV 显微拉曼设计，可烘烤至150℃，所有法兰通用铜片密封。也适用于其它各类低振动要求的光学显微实验。窗口专为科学实验而设计，可现场更换。

ds.MG80.Cooler

Typical Applications • LN2 Replacement • IR Laser Diode Cooling • CCD Detectors • Raman Detectors • Infrared Detectors • Mobile Communications • Cold traps • Optics • Electronics (LNAs, HTS, CMOS, Etc.)

ds.LTR

Standard Features: • Glassware to fit into the Bruker cavity. Varian and JEOL are also available. • Bruker cavity adapter • Mounting arrangement for the Bruker magnet. • Sample space is in the sample rec eiver. • Transfer Line has Braided Stainless Steel casing over bellows for durability. • Flowmeter Panel for Helium flow control and optimization. Flow settings can be repeated precisely for standard experiments with multiple operators. • Dewar Adapter with pressure relief valves to ensure safety of system during pressurization of the dewar and to protect the transfer line from stresses.

ds.LC1-x1

Liquid Nitrogen Pour Fill: Inexpensive cryostat for short term experiments at 77K and 77K to 200K range with the high temperature interface.

ds.cs210-x21

Applications: High Cooling power for: Low Vibration Optical Experiments Quantum Dot – Photoluminescence, MicroRaman, Micro PL. Microspectroscopy. Kerr Effect (MOKE), Ellisometry

ds.cs210-x5

Closed Cycle Cryostat for Neutron Scattering Experiments. The CS-210 is a high power cooler with fast cooldown and high cooling power.

ds.cs202-x15

The Displex cryocooler is perfectly suited for EPR experiments at controlled low temperatures in Laboratories where Liquid Helium is impractical or where long duration experiments are frequently performed. These cryogen free systems can regulate the sample temperature between 4K and 450K

ds.windowmaterials

Optical specifications of window materials. ARS cryostats are available with a large selection of optical windows for UV, Vis and IR experiments. UV - .1 to .3 Microns (100 - 300 Nanometers) VIS - .3 to 1 Microns (300 to 1000 Nanometers) IR - 1 + Microns ( 1000 nanometers)

ds.Spcl-ParahydrogenGeneration

DE-204A for Para Hydrogen generation.Includes two capillaries and a copper chamber for catalyst. Hydrogen is precooled on 1st stage to 30-40K it enters the chamber interacts with the catalyst and the parahydrogen exits the chamber through a short tube directly connected to the exit fitting.

ds.samplehldrs

Optical (Transmission). 0.75 in. clear view. Flat Plate:Backscattering

ds.floor-stand

ARS Floor Stand for Ultra-Low Vibration Interfaces ·Adjustable height ·Extruded aluminum construction ·Wheels for moving stand

ds.Compressors

Safety Features: • Internal breaker switch with indicator light. • High temperature switch with red (over temperature) indicator light on front panel. • Over current switch, automatically resets.For voltage spikes. • Fused protection for low voltage circuits

DS-PSF-10-4

This model of the ARS Probe Station is designed for the ultimate in flexibility for non-destructive device testing. The ability to upgrade and modify this system for further device testing has been in the forefront of this design.

ds.cs202-x2c

Closed Cycle Cryostat Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

DS-CS210AF-GMX-20B

The CS210*F-GMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE210*F-GMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE210 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Due to the exchange gas being less conductive, the base temperature will increase by ~1K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS204AF-DMX-20B

The CS204*F-DMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE204*F-DMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS210AF-GMX-20

The CS210*F-GMX-20 pairs our largest cryocooler, the DE-210, with our X-20 Ultra Low Vibration interface to offer unprecedented cooling power at nanometer vibration levels. The CS210*F-GMX-20 uses a Helium Exchange Gas to decouple the sample space from the cold tip of the DE210 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Because the exchange gas is inherently less efficient than cooling by conduction, t the base temperature of the sample may be ~1K higher than the cryocooler. Additionally the GMX-20 interface requires the cold tip down orientation to facilitate convective cooling of the exchange gas.

DS-CS202AF-DMX-20

The CS202*F-DMX-20 opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The DE202*F-DMX-20 uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE202 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling Capacity is roughly cut in half at varying temperatures.

ds.cs202-x15

Closed Cycle Cryostat for EPR The Displex cryocooler is perfectly suited for EPR experiments at controlled low temperatures in Laboratories where Liquid Helium is impractical or where long duration experiments are frequently performed. These cryogen free systems can regulate the sample temperature between 4K and 450K

DS-CS210AE-GMX-1SS

The CS210*E-GMX-1SS offers very high cooling power for fast cool downs and low base temperatures. This system is ideal when characterizing large materials with high heat loads or when the lowest possible temperature wants to be achieved. The system is capable of vacuum levels of 10-7 Torr with an appropriate vacuum pump. The lower vacuum reduces the sample surface contamination such as water molecules, which can be particularly detrimental to IR Spectroscopy.

DS-CS204AI-FMX-1SS

The CS204*I-FMX-1SS is our standard intermediate cooling power cryostat for optical and electri-cal measurements. This high performance system offers and all stainless steel constructed vacu-um shroud along with a welded stainless steel instrumentation skirt. This system is capable of achieving vacuum levels of 10-7 Torr with an appropriate vacuum system.

DS-CS202AI-DMX-1SS

The CS202*I-DMX-1SS is a high performance closed cycle cryostat for Optical, Electrical, and Magnetic sample testing. It has an all stainless steel vacuum shroud along with a welded stainless steel instrumentation skirt. The system is capable of vacuum levels of 10-7 Torr with an appropriate vacuum pump.

μdrift彩页

温度范围： 4K-500K 防热辐射屏安装有冷窗，更好的保证最低 温时的温度稳定。 振动： 3-5nm 峰-峰振动 @2.4Hz <1nm 更高频率

uDriftmicroscopycryostat

High Performance ULVD Cryostat will feature: •Ultra Low Vibrations. •Ultra Low Drift in XY. Wide temperature range. •Ultra Low Drift in Z axis. Wide temperature range. •UHV compatible materials. •UHV design. Stainless body. •Piezo positioners, XYZ. Available as options •Large breadboard capability. •Cold objective in sample chamber for Near Field Optical Experiments. •Side and top mounted optical windows. •Low noise wiring. •RF and DC •Monolithic frame for easy installation.

µDriftSystemFlier

The ARS μDrift Cryostat is purpose built to remove key barriers to long-term optical and variable temperature experiments. Combining the company’s experience in robust cryogenics with convenient optical access and new low drift designs assures success when studying nanometer scale samples and other structures.

DS-LT3M

The ARS manufactured LT3M Helitran is a True UHV cold head (10-11 Torr) where all of the rub-ber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats, the LT3M is an advanced liquid helium flow cryostat utilizing many unique features, such as the matrix heat exchanged and the coaxial shield flow transfer line to achieve unparalleled efficiency and ultra low vibration levels. The combination of True UHV and angstrom level vibrations makes the LT3M ideal for low temperature application. The extended length and addition of a rigid support tube allow for cleaving and manipulation.

DS-LT3B

The ARS manufactured LT3B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats, the LT3B is an advanced liquid helium flow cryostat utilizing many unique features, such as the matrix heat exchanged and the coaxial shield flow transfer line to achieve unparalleled efficiency and ultra low vibration levels. The combination of True UHV and angstrom level vibrations makes the LT3B ideal for low temperature STM application. For UHV surface science where very long cold fingers are required we have the LT3M with customizable length up to 1200 mm and rigid support tube to allow for cleaving and manipulation.

DS-CS202AE-DMX-1AL

The CS202*E-DMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system is well suited for optical, electrical, and magnetic sample testing.

低温SPM(扫描探针显微镜)解决方案

使用RHK 公司提供的PanScan 自由STM(扫描隧道显微镜) 系统结合ARS DMX-20B 产品的可实现8K 温度下的原子级分辨率。

AirDryAgSelectorGuide

DuPont Conductive Silver Compositions for General Purpose Air-Dry Applications

Micro-coaxialcable

New England Wire Technologies designs and manufactures a wide range of coaxes from highly specialized miniature coaxes to audio/video coaxes and industry standard RG series coaxes. Microminiature Coaxial Cables (42 - 34 AWG) are typically offered with fluoropolymer dielectrics to yield the smallest size and lowest loss cables possible. Ideal for short distance signal transmission, applications include antenna leads, ccd cables, ultrasound cables and test equipment leads. Due to their small size, composite cables can be manufactured with high densities of these components; samples of composite cables using coaxes are illustrated in medical, instrumentation, communications & controls, and audio/video sections of this catalog.

美国GMW-hw-322b_gmw

Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems.

美国GMW-hw-108a_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-105c_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-101a_gmw

HW-101A Shipped in packet-tape reel(3,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue

美国GMW-hq-0811_e

HQ-0811 HQ-0811は超小型SON形状量子井戸型InAsホール 素子です。 標準はテーピングリール供給です。（5000pcs./Reel） 注意：弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読み下さい。

美国GMW-hq-0221_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-0815_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-0811_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0715

HG-0715 HG-0715は、超小型SON形状GaAsホール素子です。 標準はテーピングリール供給です。（10,000pcs.／Reel） 注意： 弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読みください。

美国GMW-HG-0712

• 医療機器、安全装置、航空宇宙用機器、原子力制御用機器など、その装置?機器の故障や動作不良が、直接または間接を問わず、生命、身体、財産等へ重大な損害を及ぼすことが通常予想されるような極めて高い信頼性を要求される用途に弊社製品を使用される場合は、必ず事前に弊社代表取締役の書面による同意をお取りください。 • AKM products are neither intended nor authorized for use as critical components in any safety, life support, or other hazard related device or system, and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. • この製品は静電放電により破壊されやすいため取り扱いにご注意ください。 • Handling precautions required for preventing electrostatic discharge. • 当製品にはガリウムヒ素（GaAs）が使用されています。取り扱い及び廃棄に注意してください。 • This product contains galium arsenide(GaAs).Handling and discarding precautions required.

美国GMW-hg-372a_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-176a_e

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-116c_e

These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products.

美国GMW-hg-116a_e

Handling precautions required for preventing electrostatic discharge

美国GMW-hg-106c-2u_gmw

Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems.

美国GMW-hg-106c_gmw

These products and their specifications are subject to change without notice.When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei EMD Corporation (AKEMD) or authorized distributors as to current status of the products.

美国GMW-G-0714

Shipped in packet-tape reel(10,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

美国GMW-AN_180KIT-AKM-HG-106C-2U

The AN_180KIT takes advantage of the very special lead frame and size of the AKM HG-106C-2U, GaAs, Hall element to detail the method of making a very thin (<0.65mm) thick, high field (+/-1T) magnetic field sensor.The kit incorporates a thin 0.4mm thick PCB and includes all the circuitry to interface with the Hall element. For the most temperature stable output, the HG series Halls should be driven with a constant current source. This kit has a current source of 0.5mA and an instrument amplifier to increase the Hall element output signal to a full scale analog voltage of 2.5V +/- 1.5V for a magnetic field up to +/-1.5T. The output is linear to a magnetic field of +/-1T.

XT-High-field-Dipole-Analysis-Magnets-Brochure

• Continuously variable field • Cryogen-free • Fast cooldown • Compact design • Low fringe field • Option to vary orientation of magnet mount

Worktop Elobau 3012015

Worktop Elobau 3012015 Worktop Elobau 3012015 Worktop Elobau 3012015

VWM-S-1W-A60mm-TopView

VWM-S-1W-A60mm-TopView VWM-S-1W-A60mm-TopView VWM-S-1W-A60mm-TopView

VWM-S-1W-A60mm-RightView

VWM-S-1W-A60mm-RightView VWM-S-1W-A60mm-RightView VWM-S-1W-A60mm-RightView

VWM-S-1W-A60mm-FrontView

VWM-S-1W-A60mm-FrontView VWM-S-1W-A60mm-FrontView VWM-S-1W-A60mm-FrontView

VWM-S-1W-A40mm-TopView

VWM-S-1W-A40mm-TopView VWM-S-1W-A40mm-TopView VWM-S-1W-A40mm-TopView

VWM-S-1W-A20mm-RightView

VWM-S-1W-A20mm-RightView VWM-S-1W-A20mm-RightView VWM-S-1W-A20mm-RightView

VWM-S-1W-A5mm-MainView

VWM-S-1W-A5mm-MainView VWM-S-1W-A5mm-MainView VWM-S-1W-A5mm-MainView

VWM-S-1W-A5mm-FrontView

VWM-S-1W-A5mm-FrontView VWM-S-1W-A5mm-FrontView VWM-S-1W-A5mm-FrontView

VAC-BR-Stromsensor

This brochure covers the standard current sensor range of VACUUMSCHMELZE GmbH & Co. KG (VAC) for the floating measurement of currents. Customized solutions are available on request.

VAC-4640-X152

1000 A Current Sensor for ±24V- Supply Voltage for electric current measurement: DC, AC, pulsed, mixed ..., with a galvanic isolation between primary circuit (high power) and secondary circuit (electronic circuit)

TUPF31_poster

the safety re-examination of existing GANIL facilities requires the implementation of a safety system which makes a control of the beam intensity sent to the experimental rooms possible. The aim is to demonstrate that beam intensities stay below the authorized limits defined by the safety GANIL group.

TUPF31

The safety re-examination of existing GANIL facilities requires the implementation of a safety system which makes a control of the beam intensity sent to the experimental rooms possible. The aim is to demonstrate that beam intensities stay below the authorized limits defined by the safety GANIL group.

TN-IPCT

IPCT performance recovery after primary current overload

TNG3DTM005a

The Group3 Teslameter (serial versions) may be connected to a host computer using fiber optic cables. This has the advantage of electrically isolating the DTM and is particularly advantageous when using the DTM in electrically noisy or high voltage environments.

TNC-Cable-DR0645

TNC-Cable-DR0645 TNC-Cable-DR0645 TNC-Cable-DR0645

T-ICT-BCM-RF-datasheet

Turbo Integrating Current Transformer RF Beam Charge Monitor

THM11176-TFM1186

Three-axis Magnetometers THM1176 and TFM1186 User's Manual

THM1176_technote_Metrolab

Here are the results of a quick and dirty experiment using our THM1176-HF calibration setup, shown below. The sensor is mounted in a small carriage, which in turn slides into one of the slots of the calibration fixture (blue string to pull the carriage back out of the slot). A heater is mounted on the bottom of the calibration fixture (white wires), and a thermocouple thermometer slides into a hole just below the sensor (blue wire).

The-Parametric-Current-Transformer-A-Beam-Current-Monitor-Developed-for-LEP

Toroidal transformers are used to measure the beam current in beam lines and accelerators. Placing such a transformer hi the feedback loop of an operational amplifier will increase the useful frequency range (active current transformer). A magnetic modulator can be added to extend the response to DC current, maintaining with a control loop the transformer core at a zero flux state.

Tech-Note-Current-Transducer-Cable

Tech Note: Current Transducers “Wrap Around” or Distributed Primary Current Cable

Technical-Data-Cables

Features & Benefits ? Rugged, cut-proof and rodent-resistant cable construction ? Rugged metal connector with Push-Pull locking mechanism ? MTP connector providing direct connection to Sentinel 3 - Rx6 ? Supports up to 6 Sentinal3 transmitters (via Breakout box) ? Integral shutter reduces dust ingress and improves reliability ? Dust and water resistant to IP65 when connectors are mated.

Spectramag-6-OM2021

Operation Manual for Spectramag-6 Six-Channel Spectrum Analyser for Magnetic Field, Vibration and LF Acoustics SOFTWARE VERSION 6.203

SN-mft-model-numbering-guide

A SENIS Magnetic Field Transducer (a magnetic flux density-to-analog voltage transducer, hereinafter MFT) consists of two modules: 1. The Hall probe module H (including the cable CaH) and 2. The Electronic module E.

SN-DS-hall-probe-k-for-i1a-mft

Hall Probe K for F1A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (47mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-k-for-f1a-mft

Hall Probe K for F1A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (47mm) single-chip fully integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-g-for-i1a-mft

Hall Probe G for F1A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (42mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-g-for-f3a-mft

Hall Probe G for F3A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (42mm) single-chip fully integrated 3-axis Hall-Probe.

Shape-E-SMA

CURRENT TRANSFORMER- SHAPE E/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE E/SMA CONNECTOR

Shape-D-SMA

CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR

Shape-D-BNC

CURRENT TRANSFORMER- SHAPE D/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE D/BNC CONNECTOR

Seva_BIW08

VIBRATING WIRE SENSORS FOR BEAM INSTRUMENTATION Suren Arutunian

rotating-stage_rftm

? Direct-drive concept provides faster rotating speeds and enhanced position sensitivity ? Ultra-low profile design – only 45 mm in height ? High efficiency DC step-motor optimizes available torque ? Proprietary glass scale encoder ensures 0.005°repeatability ? 6 mm diameter through-hole for convenient cable routing

RCTrms-INS

The RCTrms is a wide-bandwidth, flexible, clip-around current transducer for measuring ac currents.PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

RCTi-INS

The RCTi is a wide-bandwidth, flexible, clip-around current transducer for measuring ac currents.PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer

RCTi3ph

The RCTi is a current transducer for permanent installation. Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around. The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

PSU1-OM2443

Operation Manual for PSU1 Power Supply Unit Operation Manual for PSU1 Power Supply Unit

Product-Range-Magnetometry-DS0100

Fluxgate Magnetometers and Gradiometers Product Range

PPM-DS-p2p-FOBrochure

PPM's Fibre-Optic-Link (FOL) systems use a highly adaptable and modular platform making them ideal for a wide variety of test and instrumentation applications. Modules are available in a range of configurations, data formats and frequency ranges. PPM's Sentinel & Sentry range is the industry's choice for high quality and high performance antenna & probe remoting applications.

PPM-DS-p2p-CasesHousings

The cases are available in four options for either desktop use and/or 19” rack mounting, and all variants can accommodate up to 10 Plug-In modules plus the point2point switch panel which supplies power to the modules. If the Test & Instrumentation System Controller is fitted, then the number of module slots is reduced to 8. The cases incorporate a backplane PCB and power supply. The point2point Plug-In modules simply plug into the case, allowing the user to quickly and easily upgrade his system with additional modules at any time.

PPM-73461-HB-2-NiMH-battery-Handbook

Nickel Metal Hydride Battery Pack773461-HB-2 User Handbook

PA1-DR3047

PA1 Power Amplifier Outline Drawing PA1 Power Amplifier Outline Drawing

OM2914-Degaussing-Wand

Operation Manual for Degaussing Wand Operation Manual for Degaussing Wand

NPCT-RFC

NPCT-RFC NPCT-RFC NPCT-RFC NPCT-RFC NPCT-RFC NPCT-RFC

NPCT-115-H

NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H NPCT-115-H

NPCT-75

NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75

MX-BPM-Datasheet

Optimized for electron/positron Storage Rings 1μm X and Y resolution Handles >75dB beam intensity range Each button sampled up to 10 000 times per second

MS2WFP-to-PC-RS232-Cable-DR0631

MS2WFP TO COMPUTER CABLE MS2WFP TO COMPUTER CABLE MS2WFP TO COMPUTER CABLE

MS2H-DR2150

MS2H PROBE OUTLINE MS2H PROBE OUTLINE MS2H PROBE OUTLINE

MS2_MS3-DS0020

MS2/MS3 Magnetic Susceptibility System MS2/MS3 Magnetic Susceptibility System

Model-5452-Field-Uniformity

Model-5452-Field-Uniformity Model 5452 Field Uniformity, I = 3.5A

Model_3474_System_Installation-NA

Model 3474 System Installation; Minimum Facility Requirements for Systems with Field Reversal, High Precision Systems and High Power Systems installed in North America

MMS-1A-RS-Operating-Manual_US

Magnetic Field Mapper MMS-1A-RS is the high-end version of the SENIS Magnetic Field Mapping Systems. It allows users to perform a fast, high resolution mapping of magnetic flux density around permanent magnets, electromagnets or electronic circuit boards. The map of the magnetic field can be presented as color coded 2D or 3D visual displays on a PC screen and as a table of numerical measured values. Measured data are analyzed in real-time, which provide data analysis capabilities for an advanced inspection, characterization and quality control of permanent magnets.

ML_TN_THM1176-HF-as-a-Thermometer

In order to compensate for temperature drift, the THM1176-HF sensor includes a temperature sensor. The THM1176 command set allows reading its value. Does this mean that I can use the THM1176 as a thermometer?

ML_MAN_2025

The PT 2025 NMR Teslameter System (Fig. 1) comprises the following: • Bench-top main unit with RS 232C and (as an option) IEEE-488 interfaces • At least one NMR probe • A multiplexer if several probes are required

ML_DS_pt2025

An everyday tool for rapid, automatic and highly accurate measurements of magnetic fields: research, magnet manufacturing and testing, standards and calibration.

ML_DS_1176-1186

The world’s most compact 3-axis magnetometer. Plugs into desktop, laptop or handheld computers. Lightweight, low-power, go-anywhere, measure-anything.

metrolab_fieldmap_PM-1005-0275

Typical Field Map for Metrolab Model PM-1005-0275 Permanent Magnet

Matesy-MO-PRES-MagnetoOpticalDomainAnalysisElectricalSteel

Matesy GmbH Steel domain analysis with the magneto-optical sensor system CMOS-MagView

Matesy-MO-DS-MagnetoOpticalSensors

The magneto-optical sensor technology is an imaging method for magnetic measurement, forensic investigations and non-destructive testing. The sensor technique enables field analysis and quality assurance of different magnetic materials. Magneto-optical sensors with different measuring ranges are available in standard sizes, customized geometries and as sensor array up to 100 x 100 mm.

Matesy-MO-ARTICLE-MagnetoOpticalSensors

The use of magnetic materials for manufacturing and in research has grown dramatically. The importance of magnetic measurement and testing applications will continue to rise corresponding to technological trends such as electric mobility, robotics, miniaturization and automation technologies, as well as promising magnetic materials (e.g., polymer-bonded magnets and magnetic shape memory alloys). At the same time, growing demand for sensors for use in static and dynamic magnetic measurement applications have pushed established sensor technologies to their limits. Magneto-optical sensor technology offers entirely new perspectives in the field of magnetic measurement and testing.

Matesy-DS-MagView

The magview is a magneto-optical device for the fast and accurate visualization of magnetic structures. As a handheld device, the system can be applied for qualitative tests and stray field analyses. The magview visualizes magnetic stray fields, for instance of magnetic stripe cards, magnetic encoders and multi pole magnets.

Matesy-DS-MagEye

The mageye is a digital microscope camera system with an integrated magneto-optical sensor tip for the fast and reliable visualization of magnetic stray field structures. The portable system, including a comprehensiv user software allows realtime stray field analyses and quality tests of magnetic materials. It is possible to visualize magnetic stray fields of magnetic stripe cards, magnetic tapes, magnetic encoders, obliterated serial numbers, magnetic ink as well as di- and multipole magnets.

Mapper-Flyer-inside

A wide range of power supply units are available for our range of single and three-axis magnetic field sensors. All units accept analogue inputs from our sensors and output the signal to an analogue-to-digital converter or other separate device.

Magnetics2016-SENIS-Presentation

Integrating Magnetic Field Mapping Crack Detection and Coordinate Measurement Author: S. Spasic, Senis AGPresented by: Ben Hartzell, GMW Associates

MagneLab-DS-CT

The Magnelab Current Transformer (CT) provides an accurate, nondestructive (noncontact), measurement of single or repetitive unipolar or bipolar pulses, or continuous wave.

Mag690-OM2604

Operation Manual for Mag690 Three-Axis Fluxgate Magnetometer

Mag690-MX-DR2690

Mag690-MX Outline Drawing Mag690-MX Outline Drawing

Mag690FL-DR2664

Mag690-FL Outline Drawing Mag690-FL Outline Drawing

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor provides measurements of static and alternating fields up to 1mT. Its simplicity makes it ideal for integration into systems using large numbers of sensors in which unit cost is a critical concern.

ew-650B_gmw

EW-650B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-500_gmw

EW-500 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-460_gmw

EW-460 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package

ew-453_gmw

EW-453 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-400_gmw

EW-400 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EQ-733L_MS-1381-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 20mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 2mVp-p

eq-430l_e

EQ-430L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-1791_gmw

EM-1791 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DTM-151-S_Manual_-S5

DTM-151 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-132-wGPIB-Manual

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DTM-130-G-DTM-141-G-Manual

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DTM-130-141

Fully configurable dedicated 6-channel system interface unit for ultra-stable, high pre-cision fluxgate technology DS series current transducers.Powers up to 6 x DS50 to DS2000 at the same time.Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V)

DSSIU-6-1U

Fully configurable dedicated 6-channel system interface unit for ultra-stable, high pre-cision fluxgate technology DS series current transducers.Powers up to 6 x DS50 to DS2000 at the same time.Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V)

DS600UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 660A

DS400ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 600A

DS200UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 220A

DS200UB-1V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 330A

DR2982

Mag-03MSS-TC XSJ-9-CCP Moulded Cable Mag-03MSS-TC XSJ-9-CCP Moulded Cable

DR1481

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR1255

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0756

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DQ500ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 800A

DM1200UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DM Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1320A

DL2000ID-CB100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

Degaussing1-Wand-DS2914

This mains powered, handheld instrument is used for removing accumulated magnetic fields. It generates an AC magnetic field which can be used to degauss magnetic shields or other equipment that have become magnetised through exposure to magnetic fields.

Datasheet_DR10000IM

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 11000A

CZ-3703

CZ-3703 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3701

CZ-3701 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3700

CZ-3700 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWTUM-Dimensions

Positional accuracy and external currents Due to small variations in the winding density and coil cross sectional area the transducer output varies slightly depending on the position of the current in the coil and also the size of the current conductor relative to the coil.

CWT-Ultra-mini

The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

CWT-Power-Cable-YK

CWT / CWT LFR Power Cable compatible with ALL Yokogawa instruments fitted with Probe Power Option

CWT_MINI-instructions

PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

CU2-DR3999

CU2-DR3999 Operation Manual for CU2 Closed Loop Module

CU1-DR3320

Operation Manual for CU1 Helmholtz Coil System Control Unit

CU1-Control-Unit-OM3224

Operation Manual for CU1 Helmholtz Coil System Control Unit

CT-07.08.App_.note

Bergoz Instrumentation Current Transformers have been employed in an interesting application to detect faults in the electricity supply lines in Southern Africa. ABB successfully installed Bergoz CTs recently and the system described below is now operational in the field.

CT-04.10.Tech_.note

For personnel and equipment safety and measurement accuracy, current measurements on conductors at high voltage should be made only with a conducting shield cylinder placed inside the CT aperture. There should be a low electrical impedance connection from one end only to a reliable local ground. An inner insulating cylinder of adequate voltage isolation should be between the shield cylinder and the conductor at high voltage. Any leakage, induced or breakdown current between the high voltage conductor and the ground shield will substantially pass to local ground rather than through the signal cable to signal ground. Do not create a "current loop" by connecting the shield cylinder to ground from both ends. Current flowing in this loop will also be measured by the CT.

CQ-3300

CQ-3300 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3200

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2366

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2334

CQ-2334 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2235

CQ-2235 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2233

CQ-2233 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2092

CQ-2092 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2063

CQ-2063 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-330G

CQ-330G is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3_Series_Application_Note

CQ3_Series_Application_Note CQ3_Series_Application_Note

CPCO-XXXX-160-07

The CPCO Series (160mm) Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of ±4000A ±8000A, ±12000A with an accuracy of +/-1% and non-linearity of <+/- 0.5%. The bandwidth is dc to 40kHz. The Current Probe splits along a diameter allowing easy installation to existing cables without having to break the connection. A captive screw is used rather than a clip to ensure consistent closure under mechanical loading or vibration.

CATALOG_AKM-Kit-and-Ref-Catalog

AKM Magnetic Sensors Engineering Development Kits Demonstration Modules Application Case Studies

calibration-tool-mfcsv1-2

The SENIS MFCSv1.2 Calibration Set for magnetic field measurement is provided as an accessory for permanent magnet mapping applications, such as SENIS MMS (All-in-One Magnetic Field Mapping System). The MFCS is used to precisely determine the location of a Hall elements sensitive area.

BSS-02B outline drawing

BSS-02B outline drawing BSS-02B outline drawing BSS-02B outline drawing

BSS-02B-electronic-interface

BSS-02B-electronic-interface BSS-02B electronic interface

Brochure-MFC2046-US

Introduced 25 years ago, Metrolab’s NMR Magnetic Field Cameras have revolutionized field mapping for MRI magnets. They reduced acquisition times from hours to minutes, positioning errors to fractions of a millimeter, and they rendered human and drift errors negligible.

BPs_5-14-PEM

Next-Generation Current Probes for High-Speed and High Power-Density Applications Clip-on Rogowski current probes provide a convenient and accurate means of measuring alternating currents. The latest wideband probes use an innovative shielding technique to eliminate the effects of high electrostatic field strengths in today’s high power-density and high-speed circuits.

BI-MAN-DegaussingWand-OM2914

Bartington Instruments, single or three-axis fluxgate magnetic field sensor.

BCM-IHR-manual

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BBMXX-KIT-I-Specification

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BB-BPM-Datasheet

For cancer therapy synchrotrons Tracks the beam during energy ramp

BB-BPM.manual-2.3

BB-BPM.manual-2.3 Baseband Beam Position Monitor User’s Manual

BATT-CONN-4PIN-Outline

Bartington Instruments manufactures a range of Fluxgate magnetometers and acquisition units, magnetic susceptibility systems, and a range of test equipment. Some of these products are subject to export control. The summary below is provided to give an overview of the rules that apply.

Bartsoft-Mobile-OM2518

Bartsoft Mobile software acquires, corrects, displays, stores and prints data using Bartington Instruments MS3 meters. This guide explains how to use the software and helps the user understand how it works, including the function of all controls and windows.

APEC

The practicalities of measuring fast switching currents in power electronics using Rogowski probes

AN0036-Fluxgate-magnetometers-used-for-on-board-closed-loop-degaussing

To provide real time data for mitigation of magnetic signatures of ships and submarines.

AN0034-Mag-03-used-in-MRI-Controlled-Area-Safety

To increase worker safety within MRI suites and similar facilities by mapping magnetic field values and establishing proximity limits for ferromagnetic materials.

AN0032-Mag-03-for-Payload-Attitude-Control-on-Sounding-Rockets

To contribute to payload attitude control on board sounding rockets by providing accurate data on the Earth’s magnetic field.

AN0029-Mag-01H-used-for-Field-Measurements-in-Cryogenic-Chambers

To measure magnetic field strength and fluctuations in experimental setups operating at cryogenic temperatures.

AN0028-Mag-01H-DI-used-in-Absolute-Declination-and-Inclination-Measurements

To calculate absolute values of declination and inclination in the Earth’s magnetic field at a specific location, for accuracy of magnetic measurements.

AN0026-Mag-03-used-to-measure-ELF-magnetic-field-emissions-from-mobile-phones

To measure ELF (extremely low frequency) magnetic fields produced by mobile telephone handsets.

AN0025-Mag-03-used-to-measure-solar-weather-from-the-ground

To protect communications, power and other technological systems from unusual solar activity by monitoring solar weather from ground stations.

AN0024-Mag-03-and-Spectramag-6-used-in-magnetic-hygiene-tests-of-spacecraft-components

Pre-installation EMC testing (electromagnetic compatibility) of components, and pre-launch EMC testing of spacecraft.

AN0023-Mag-01H-for-compass-safe-distance-testing

Make equipment compliant with international regulations, and to help ensure reliable navigation, by ascertaining the level of interference that the a particular item of equipment causes to a compass.

AN0021-the-applications-of-the-Bartington-BSS-02B-Sonde

Magnetic susceptibility is an important characteristic of rocks and minerals. It changes according to the materials’ magnetic properties (dia-, para-, ferromagnetic&#823) and will range from negative to highly positive values.

AN0020-The-use-of-Bartington-Fluxgate-Magnetometers-in-MT

Applications include mineral prospection,hydrogeology, geothermal and oil exploration,astrophysics, and earthquake studies.

AN0019-The-application-of-the-Bartington-Fluxgate-Magnetometers-in-TDEM

This note describes an improvement to the TDEM method which will mostly concern mineral exploration, in which the main interest is highly conductive bodies, such as ore bodies. This is articularly the case for exploration for nickel or sulphides.

AN0015-Magnetic-Susceptibility-Measurements-Using-the-MS2-MS3-System

Magnetic Susceptibility Measurements Using the MS2/MS3 System

AN0001-Applications-of-Single-axis-Fluxgate-Magnetometers

The Magnetic Resonance Imaging (MRI)equipment used in medical physics requires the generation of stable magnetic fields, and is therefore susceptible to interference from external fields. This might be caused by radio frequency interference, lower frequency interference from electrically-operated equipment - such as lifts within the same building - or from electric trains, even at a considerable distance. It is standard practice to survey an area prior to installation of this sensitive equipment to record the variations in the magnetic field, and thereby select a site with the least disturbance, or to establish the level of magnetic shielding required.

AN_BBM-01

This AN_BBM-01 provides guidance in sizing bus bars to obtain the desired BBM-01 Bus Bar Module sensitivity for DC currents. The BBM-01 determines the current in the bus bar by measuring on both sides of the bus bar, the magnetic field generated from the current through the bus bar. The magnitude of the magnetic field at the sensor is a function of the width and thickness of the bus bar as well as the current through the bus bar. This guide provides the output Sensitivity in mV/A for the BBM-01 as a function of bus bar width and thicknesses for various standard Imperial dimensioned bus bars.

AN_181-Application-Note-EM-3242

The AKM EM-3242 Non-Contact Angle Position Sensing IC is a very small, low cost and easy to use angle position sensor with a continuous 360 degree range. The EM-3242 provides an absolute position output which means the power can be removed then reapplied and the output will continue to have the correct angle even if the rotating magnet moved while the power was off. The device requires very little power and operates at 3V+/-10%. The EM-3242 senses the angle of magnetic field component that is parallel to the plane of the device package and provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The device includes a power down ( PDN ) function which reduces the current draw to less than 10uA.

AN_134KIT-Spec

The AN_134KIT consists of a EM-3242 angle sensor mounted on a small 0.25 in. square PCB with a 6 in. flat cable. Also included in the kit are three SmCo24 magnets compatible with the angle sensor; a 0.25 in. diameter magnet, a 0.15 in. diameter magnet and a 0.25 in. square magnet. The sensor works well with smaller magnets, but with less air gap. The Sensor incorporates an “Out of Range” detector circuit and will fault the output to zero volts when the magnet’s strength is either too weak or too strong, see Reference Design RD102_EM3242 for details.

AN_133KIT-Spec

The AN_133KIT consists of a EM-3242 angle sensor mounted on a small 0.25 in. square PCB with a 6 in. flat cable. Also included in the kit are three SmCo24 magnets compatible with the angle sensor; a 0.25 in. diameter magnet, a 0.15 in. diameter magnet and a 0.25 in. square magnet. The sensor works well with smaller magnets, but with less air gap. See Reference Design RD101_EM3242 for details.

AKM-Currentier-Series-Test-PCBs

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

AKM_DS_EM3242-AngleSensor

□ Small absolute rotary encoder □ Small input device (mode selector, volume control, and soon) □ Potentiometer □ Rotary switch

AKM_2011_Sensors_PG_GMW

A Hall Element is a magneto-electric transducer which utilizes the Hall Effect to measure or sense a magnetic field perpendicular to the Element. AKM Hall Elements typically have 4 pins, 2 input pins and 2 output pins, and can be driven by either a voltage or a current source. The output is a Hall voltage that is proportional to the magnetic field. The output from a Hall Element is analog and typically requires additional amplification. AKM uses four different semiconductor materials in its Hall Elements. These different materials represent AKM’s 4 different series of part numbers. The different materials provide different performance characteristics (magnetic sensitivity represented by electron mobility and band gap, operating voltage, temperature sensitivity, etc.) allowing the design engineer to choose the best solution for the particular application.

ak8789_e

Features ?High sensitive omnipolar operation ?Dual output ?Micropower operation 　Typ.6.5μA（average:VDD=1.85V） ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

AK8788-04APR2012

Features ?High sensitive omnipoler operation ?Micropower operation 　Typ.4.5μA (average : VDD=1.85V) ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

AK8779B

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8777B_MS1465-E-00_120906-GMW

The AK8777B is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The output OUTA and OUTB are switched according to the vertical and horizontal magnetic fields applied to the device. The AK8777B is for use in the incremental pulse encoders or rotational detection systems.

AK8775-MS1316-E-00_110715-GMW

AK8775 is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The result of Hall effect latch operation in vertical and horizontal magnetic field is read out to OUTA pin and OUTB pin. AK8775 is for use in portable devices which uses rotational detection system or incremental pulse encoder such as jog dial utilized for input devices.

ak8771_e

Features ?Precision Bipolar Hall Effect Latch ?Power manageability through "PDN" pin Current consumption in Power down mode is less than 1μA ?Ultra small SON package : 1.1×1.4×t0.37mm,　Halogen free

ACCT-shielding

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-175-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-028

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-016

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

18900480_A_1060-62_Probe_Sample_Location_Range

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11901230_F

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

245487

Performance Evaluation and Utility Assessment of Magneto-Optical Sensor Technology for Detecting and Visualizing Obliterated Serial Numbers in Firearms

17900-2236-0-Outline

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2235-0A

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2212-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

16928-0000-0_A_IST600S_Adaptor_Plug

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5503_Users_Manual

USER’S MANUAL MODEL: 5503 Electromagnet USER’S MANUAL MODEL: 5503 Electromagnet

5204_Brochure

The 5204 electromagnet is a projected vector field magnet providing field of any orientation at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible. A clear path exists all the way through with Ø2.5mm, this allows optical access from the beneath.

5203_PoleOptions

5203_PoleOptions Field Performance at Peak Excitation of 100A

5203_Eaton_Interlock_Logic

In an interlock event the protected power lines are disconnected, the unprotected lines remain powered. In this case, the power supplies lose power and the magnet is inert, the PC remains on.

5203_C_Proj_Vert_Field_Magnet

USER’S MANUAL MODEL: 5203 PROJECTED VERTICAL FIELD ELECTROMAGNET

5201 test data hysteresis AC excitation

MODEL: 5201 PROJECTED FIELD ELECTROMAGNET TEST DATA Hysteresis & AC Excitation

3480 Uniformity PoleGap PoleFace 35A

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480-SN04-thermal-stability

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

2007 MMM 231HC Presentation

GMW 231HC Bipolar Current Amplifier • True Bipolar: +/-160V, +/-70A. • Enables fast ramping of solid and laminated electromagnets. • With GMW 5403AC laminated electromagnet -2T to +2T ramp time is 0.1 sec or 40T/sec. • USB interface with 16-bit input/output resolution.Current programming.Readback of output current, voltage and magnetic field. • Based on Copley Controls 231HC MRI Gradient Amplifier.

55C0126

This manual contains all relevant information on the steps, which are necessary to start the 3MTS Teslameter software installation and to operate it properly, once the 3MTS is connected to the PC or Tablet via the delivered USB cable. All files, including the software, user manuals and calibration data have been stored on the 3MTS USB flash memory stick, which is a part of the Teslameter package

3MTS SENIS flyer inner

We invented, produce and sell some of the most advanced magnetic field and electric current sensors on the markets. In the context of customized developments for specific applications we may licence part of our base technologies and designs to dedicated customers.

3mtslib

3mtsLib is a software library for easy data acquisition and communication with 3mts sensors. The software consists of a DLL to be imported into your data acquisition project

2SA10

Sentron’s new magnetic angular sensor 2SA-10 detects the absolute angular position of a small magnet that is positioned above the device surface. The 2SA-10 is an integrated combination of a CMOS Hall circuit and a thin ferromagnetic disk. The CMOS circuit contains two pairs of Hall-elements for each of the two directions parallel with the chip surface X and Y. The ferromagnetic disk amplifies the external magnetic field and concentrates it on the Hall elements.

1DSA-05-Dif-to-Sin-Adap

The 1DSA-05 converts a differential voltage into a corresponding single-ended voltage with respect to an external ground reference. The 1DSA-05 can be used as an extension of the electronic module (Module E) of SENIS’s single-axis magnetic flux density to voltage transducers: it enables measurement of the transducer output voltage using the instruments that have singleended inputs (such as oscilloscopes).

The SPI Supplies Family of Vacuum Pump Fluids

The SPI Supplies Family of Vacuum Pump Fluids Pump fluids can be segmented by application (e. g. mechanical pump vs diffusion pump) or fluid type (e.g. perfluorinated polyether vs. silicone vs. polyphenyl ether vs. dioctyl sebacate vs. other hydrocarbon type fluids).

SPI-Module™ Sputter/Carbon Coater System™

The SPI Supplies Sputter/Carbon coating system allows the flexibility to choose between carbon evaporation and metal sputtering, all in the same system.

SPI Supplies® Brand Microanalysis Standards

High quality Standards for Microanalysis for any laboratory with EDS, WDS or EPMA

New from SPI Supplies

SPI Supplies has introduced a line of small,easy to use shakers, mixers, centrifuges and hotplates / stirrers. All products are available is 110V or 220V for use worldwide.

SPI-DRY™ Critical Point Dryers

The SPI-DRY line critical point dryers are built rugged and easy to use. Simple manual controls allow for precise control over heating, cooling, and venting rates. From life sciences to aerogels to MEMS applications, the SPI-DRY critical point dryer does it all.

SPI Supplies Plasma Prep™ RIE

The SPI Supplies Plasma Prep Reactive Ion Etcher (RIE) uses a chemically reactive anisotropic plasma to etch and remove materials from package devices, wafers, and other substrates where a directional field is needed. In failure analysis labs, the use of wet etching for these samples is not only dangerous, in many cases it causes undercutting due to the isotropy of the etch. The Plasma Prep Reactive Ion Etcher uses dry etching to create an anisotropic etch—meaning that the etch is uni-directional

SPI Plasma Prep III™

The Plasma Prep III is the latest member of our Plasma Prep family. The system incorporates solid-state technology, including an integrated vacuum gauge. As part of its low cost design, the system comes single gas inlet. The addition of the optional Process Control Module expands the system, and allows precise mixing of multiple gasses, as well as the ability to automatically shut the system down when the process is complete.

05001/05002/05005 S Paint S Streaker MSDS

Structure Probe Inc. / SPI Supplies confirms that: 05001-AB, 05002-AB, 05002-GA, 05002P-AB, and 05002-GA Silver Conductive Paint are RoHS2 compliant, fulfilling the definitions and restrictions defined under Directive 2011/65/EC of the uropean Parliament and of the Council of 21 July 2011.

The SPI Supplies Family of Instruments

Your results will never be better than your sample preparation. See how SPI Supplies can help you deliver the highest quality results for all your SEM/EDS, TEM and FESEM applications.

SPI Supplies ® Graphene Products

The use of graphene in research is a growing area requiring a source of high quality materials and substrates. SPI Supplies now offers a source of graphene in various forms*. Using a unique patented CVD process, these graphene films are clean and uniform.SPI Supplies currently offers graphene as support films on TEM grids or on copper substrates.

REBEKA BSE Detector

REBEKA™ combines the best available single crystal scintillators manufactured by Crytur with precise high-vacuum mechanics and readout electronics in one ready-to-use package.

Precision Glass Cutters

The SPI Supplies line of Precision Glass Cutters are designed to allow users to quickly and easily cut large pieces of materials into smaller sizes, utilizing either a carbide or diamond cutting wheel. It is not technically a "cutter", but rather creates a score mark in the material that allows the user to then create a clean break by snapping along the score line.

Apiezon T Medium Temperature Vacuum Grease Datasheet

Apiezon T grease is a versatile filled hydrocarbon grease for multi-purpose sealing applications in the low to medium vacuum range at medium temperatures.

美国ARS超稳无液氦低温光学恒温器

• 4-500K温度 • 超低振动 • 超低漂移 • 超高真空兼容 • 选配纳米平移台 • 更大4英寸低温冷台 • 顶部及侧边窗口 • 低噪音测试引线 • 高频及直流测试 • 整体式结构，更方便安装

美国ARS-DS-CS204AF-FMX-19N-非光学顶端装载型闭循环低温恒温器

X-19-NO是顶端装载样品的非光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。 该系列恒温器尾部可做成非常细小，而且由无磁材料制成，特别适合匹配超导磁体进行磁化率及VSM测试。 X-19-NO系列恒温器可配备DE-202、DE-204或DE-210系列冷头。

美国ARS DS-CS202AE-DMX-1AL标准光学型闭循环低温恒温器

X-1AL系列标准光学型闭循环低温恒温器因其测试灵活，价格经济而成为绝大多数实验室样品及装置测试的最优选择，该系统广泛应用于各种光、电、磁测试。 X-1AL系列恒温器可配备DE-202或DE-204系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。