美国ARS 中子散射型闭循环低温恒温器 X-5

Product-Catalog-2021

VI Systems GmbH (VIS) is a developer and manufacturer of optoelectronic components for optical communication, consumer and automotive applications. In the field of optical communications VIS offers optical components, such as vertical cavity surface-emitting lasers (VCSELs) and PIN photodiodes capable of up to 224 Gbps per channel and beyond. VIS VCSEL driver and PIN amplifier integrated circuits operate up to 56 Gbps with NRZ modulation. The latest generation of VCSEL and PIN photodiodes allow 400 Gbps PAM-4 energy efficient data transmission over one fiber with four channel short wave division multiplexing (SWDM) at 850 / 880 / 910 and 940 nm wavelength.

Opti-MAxesTM Model OPMX-141-1

Opti-MAxesTM Model OPMX-141-1 Superconducting Magneto-Optical Vector Magnet System

MaxesMX-4.5-9-30

MAxesTM Model MX-4.5/9-30 Superconducting Vector Magnet System

tube-inspector Flyer English

The tube-inspector is an automated system for the fast and precise measurement of tubular targets. It was developed to analyze coated pipes and tubes (e. g. rotational targets) before and during the production process. The system provides information about the quality of the process and the lifetime of tubular targets. Parameters, such as the diameter, ellipticity and deflection can be determined.

tube-inspector Flyer German

Der tube-inspector ist ein automatisiertes System zur geometrischen Vermessung von Rohrtargets und Magnet Bars. Das System wurde für die Analyse beschichteter Rohre und Leitungen (bspw. rotierende Targets) vor und während des Produktionsprozesses entwickelt. Hierzu gehören Aussagen über die Qualität des Prozesses sowie die Lebensdauer der Targets.

magtrack Flyer German

Das magtrack System basiert auf dem magnetischen Marker Monitoring Verfahren und wurde entwickelt, um die Bewegungsabläufe in geschlossenen Systemen aufzuzeichnen, zu analysieren und gegebenenfalls zu optimieren. Mit dem magtrack ist es möglich, die absolute 3D-Position im Raum sowie die Rotation eines magnetisch markierten Partikels zu detektieren. Das magtrack System ist modular aufgebaut und kann somit an beliebige Anlagen und Systeme angepasst werden.

cmos-magview Flyer German

Der cmos-magview ist ein digitales magnetooptisches Auslesesystem zum schnellen und präzisen Visualisieren magnetischer Streufelder. Das Sensorsystem erlaubt eine Echtzeit-Magnetfeldanalyse und ist für die Qualitätsprüfung von Magneten geeignet. Visualisiert werden Streufelder von,beispielsweise, Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten. Eine intuitive Anwendungssoftware übernimmt die Darstellung mithilfe von Falschfarben.

Magneto-OptoKerrEffect

Magneto-Opto Kerr Effect (MOKE) is a technique to investigate the magnetization structure of materials by the change in intensity and polarization of reflected light from the magnetized surface. MOKE is one of the magneto-optic effects. Kerr effect, investigating reflected light, is similar to the Faraday effect, which is to detect the transmitted light. Upon the direction of the magnetization vector with respect to the reflecting surface and the incident plane, there are polar MOKE, longitudinal MOKE, transversal MOKE, and quadratic MOKE. In addition, low-temp MOKE helps characterize superconductor/magnetic materials in terms of current density and magnetic flux distribution.

NobleGasAnalysis

The noble gases, i.e., helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), form a group of chemical elements with similar properties, such as odorless, colorless, and monatomic. Most importantly, they are chemically unreactive. Therefore, they are also called inert gases. Because of its chemically and biologically inert and unique isotopic features resulting from radioactive decay, the noble gases are commonly utilized to probe the ocean and Earth process, e.g., rocks and minerals dating. High-purity and quantitative noble gas sample preparation for mass spectrometric analysis are normally required. Therefore, adsorption of noble gases in an ultra-high vacuum activated charcoal trap at cryogenic temperatures is the most common procedure. The desorption of individual noble gas is a function of temperature for mass spectrometric measurements.

NeutronScattering

Neutron scattering is utilized to understand the properties of materials on the atomic scale. The benefits of the neutron scattering are to have similar wavelengths to the spacing between atoms, similar energy to atoms, no charge to avoid strong scattering by charges to penetrate more deeply into the matter, scattered similar extent by light and heavy atoms, and suitable magnetic moment for magnetism measurement. Neutron scattering produces prominent interference and energy transfer effects because neutrons interact primarily with the nucleus, not electron cloud surrounding it in XRD. Nowadays, neutron studies of quantum materials are commonly used for the development of IT technology and superconducting materials. At cryogenic temperatures, the energy distribution of the neutrons can be shifted to the lower energy end of the spectrum. Interesting neutron scattering phenomena are also commonly discovered at low-temperature.

NeutronScattering中子散射

中子散射技术利用中子散射方法研究物质的静态结构及物质的微观动力学性质。中子具备不带电、穿透力强、可鉴别同位素、较之X 射线对轻元素灵敏、具有磁矩等优点，因此中子散射技术作为一种独特的、从原子和分子尺度上研究物质结构和动态特性的表征手段，在多学科交叉领域发挥着不可替代的作用。

Fiber Optic Feedthroughs

Fiber Optic Feedthroughs — UHV rated feedthroughs available in six core sizes from 62.5μm to 1000μm. UHV Fiber Patch Cable Assemblies — Polyimide buffered fiber patch cables available in six core sizes from 62.5μm to 1000μm. Air-service Patch Cable Assemblies — Polyimide buffered fiber with PVC jacketing available in six core sizes from 62.5μm to 1000μm. Accessories — Couplers, adapters, connectors, jacketing and wrap, polishing supplies and consumables. Multimode Fiber has a large core diameter, and is commonly used in short-run cable distances such as vacuum applications. Custom fiber cable assemblies available on request. Standard flange sizes are 1.33 and 2.75 Inch CF, ISO NW16 and 40 KF. Custom flange sizes available on request.

我司在北京师范大学顺利完成美国ARS公司LT3液氦液氮型低温恒温器验收工作

近日我司在北京师范大学顺利完成美国ARS 公司（ADVANCED RESEARCH SYSTEMS）LT3 液氦/液氮型低温恒温器验收工作，搭配布鲁克Bruker VERTEX 80V 光谱仪；该款恒温器采用同轴液氦冷却低温传输管线，液氦消耗率同类产品最低0.7LL/hr@4.2K.降温时间只有20 分钟。

X-2XRD闭循环低温恒温器

X-2专用于X光衍射实验。这些系统具有铍圆顶(DMX-2D),铍窗或Kapton窗。 DE-202冷头质量轻便,配以定制的仪表群使得该恒温器广泛应用于测角仪及衍射仪。该系统通常与Huber 和Newport 测角仪及Bruker 衍射仪配合使用。 Huber 512.12恒温器支架可与 CS202*G-DMX-2D恒温器无缝集成。

X-1AL标准光学型闭循环低温恒温器

X-1AL系列标准光学型闭循环低温恒温器因其测试灵活，价格经济而成为绝大多数实验室样品及装置测试的最优选择，该系统广泛应用于各种光、电、磁测试。 X-1AL系列恒温器可配备DE-202或DE-204系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

ds.cs210-x21

Applications: High Cooling power for: Low Vibration Optical Experiments Quantum Dot – Photoluminescence, MicroRaman, Micro PL. Microspectroscopy. Kerr Effect (MOKE), Ellisometry

DS-PSF-EM-10-4

This model of the ARS Probe Station is designed for the ultimate in flexibility for non-destructive device testing. This system provides a .6T Horizontal Magnetic Field and comes with a BiPolar Power Supply.

DS-PSF-10-4

This model of the ARS Probe Station is designed for the ultimate in flexibility for non-destructive device testing. The ability to upgrade and modify this system for further device testing has been in the forefront of this design.

ds.cs202-x2c

Closed Cycle Cryostat Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

DS-CS204AF-DMX-20-OM

The DE204*F-DMX-20-OM is our Ultra Low Vibration Closed Cycle Cryostat for Optical Micrscopy applications such as MicroRaman and Micro Photoluminescence. The DE204*F-DMX-20-OM uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This pre-vents almost all vibration from being transmitted to the sample. Sample vibrations of 3-5 nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 4-5K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS210AF-GMX-20B

The CS210*F-GMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE210*F-GMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE210 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Due to the exchange gas being less conductive, the base temperature will increase by ~1K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS210AF-GMX-20

The CS210*F-GMX-20 pairs our largest cryocooler, the DE-210, with our X-20 Ultra Low Vibration interface to offer unprecedented cooling power at nanometer vibration levels. The CS210*F-GMX-20 uses a Helium Exchange Gas to decouple the sample space from the cold tip of the DE210 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Because the exchange gas is inherently less efficient than cooling by conduction, t the base temperature of the sample may be ~1K higher than the cryocooler. Additionally the GMX-20 interface requires the cold tip down orientation to facilitate convective cooling of the exchange gas.

DS-CS204AF-DMX-20

The CS204*F-DMX-20 opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The DE204*F-DMX-20 uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling Capacity is roughly cut in half at varying temperatures.

DS-CS204AE-FMX-1AL

The CS204*E-FMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system offers similar features as the CS202*E-DMX-1AL, however it offers almost twice the cooling capacity making this system less sensitive to experimental and parasitic heat load changes, sample size, number of wires, windows, etc.

低温SPM(扫描探针显微镜)解决方案

使用RHK 公司提供的PanScan 自由STM(扫描隧道显微镜) 系统结合ARS DMX-20B 产品的可实现8K 温度下的原子级分辨率。

BRAIDCABLES

High-quality custom braids, cables and strands call for a high degree of technical expertise, precision manufacturing equipment, and short lead times—all core strengths of New England Wire Technologies. We’ve earned a solid reputation for our ability to turnaround both large and small orders in record time. And many of our braids, cables and strands are in stock and ready to ship.

美国GMW-hg-0813_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-362a_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-106a_gmw

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-G-0714

Shipped in packet-tape reel(10,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

美国GMW-AN_160

The AN_160KIT is a Universal Hall Interface Module (UHIM) which provides an easy means to evaluate the Asahi Hall elements for magnetic field, electric current or position sensing applications.The UHIM consists of a differential amplifier, a voltage drive circuit for Hall elements requiring a voltage drive, a current drive circuit for Hall elements requiring current drive, and two analog output circuits to provide the standard 2.5V ±2.5V signal and a 1.5V ±1.5V signal for 0-3V input level A/D circuits.

美国GMW-AKM_2011_Sensors_PG_GMW

A Hall Element is a magneto-electric transducer which utilizes the Hall Effect to measure or sense a magnetic field perpendicular to the Element. AKM Hall Elements typically have 4 pins, 2 input pins and 2 output pins, and can be driven by either a voltage or a current source. The output is a Hall voltage that is proportional to the magnetic field. The output from a Hall Element is analog and typically requires additional amplification. AKM uses four different semiconductor materials in its Hall Elements. These different materials represent AKM’s 4 different series of part numbers. The different materials provide different performance characteristics (magnetic sensitivity represented by electron mobility and band gap, operating voltage, temperature sensitivity, etc.) allowing the design engineer to choose the best solution for the particular application.

US-Danisense-Product-Naming-Price-List-2018-letter

Since our establishment in November 2012, Danisense’s philosophy has always been to provide you the best in everything we do. In return, the market feedback has been so good. Our growth has constantly exceeded expectation. In the past several years, we’ve continuously released new products to broaden our offering.

TUPF31_poster

the safety re-examination of existing GANIL facilities requires the implementation of a safety system which makes a control of the beam intensity sent to the experimental rooms possible. The aim is to demonstrate that beam intensities stay below the authorized limits defined by the safety GANIL group.

TNG3DTM007a

A Group3 digital teslameter, model DTM-151, was tested to IEC1000-4-4, level 3, and passed to performance criterion B.

T-ICT-BCM-RF-datasheet

Turbo Integrating Current Transformer RF Beam Charge Monitor

THM1176-MF-and-HF-Sensor-Head-Dimensions

THM1176-MF AND THM1176-HF SENSOR HEAD DIMENSIONS – REV. B

Technical-information-of-LM-series

HTS-110’s LM series will provide a maximum field of 1-3T at the centre of the Ø40-80mm room temperature bores. LM series are cryogen-free and are cooled by means of a cryocooler with an associated compressor.

Technical-Data-Cables

Features & Benefits ? Rugged, cut-proof and rodent-resistant cable construction ? Rugged metal connector with Push-Pull locking mechanism ? MTP connector providing direct connection to Sentinel 3 - Rx6 ? Supports up to 6 Sentinal3 transmitters (via Breakout box) ? Integral shutter reduces dust ingress and improves reliability ? Dust and water resistant to IP65 when connectors are mated.

SN-DS-hall-probe-k-for-i1a-mft

Hall Probe K for F1A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (47mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

Shape-E-BNC

CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE E/BNC CONNECTOR

Shape-D-SMA

CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE D/SMA CONNECTOR

Shape-D-BNC

CURRENT TRANSFORMER- SHAPE D/BNC CONNECTOR CURRENT TRANSFORMER- SHAPE D/BNC CONNECTOR

SCU1-OM2441

Operation Manual for SCU1 Signal Conditioning Unit

RCTrms

The RCTrms is an ac current transducer for permanent installation. Simple to install and easy to retrofit it combines the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of ac current.

RCTi_rms-Dimensions

Coil and Cable lengths are selectable from our standard range or made to specific requirements

RCT1A-current-transformer-comparison

These technical notes should be read in conjunction with the RCT1A and RCTi technical notes and short-form datasheets. This document is intended to draw an analogy between instrument (metering) class CTs and flexible, clip-around, Rogowski current transducers so that the user can make an informed choice about the suitability of using our RCTi, RCTi-3ph or RCT1A in place of an instrument (metering) class CT.

PSU1-OM2443

Operation Manual for PSU1 Power Supply Unit Operation Manual for PSU1 Power Supply Unit

PPM-DS-p2p-PowerSleeve

The PowerSleeve has been developed by PPM to allow the complete range of AC and DC point2point fibre optic plug in modules to be battery powered. Now users have the ability to take standard transmit or receive modules and fit it into the PowerSleeve instead of relying on mains power. This option is particularly important when locating point2point modules in remote locations that have limited access, where galvanic isolation is required or where no mains power supply is present.

PPM-DS-p2p-BatterySwitch

APPLICATIONS • Compatible with all point2point products. • Compatible with all battery technologies • Provide remote control of modules via a multimode fibre • Long distance transmission, will work in excess of 1km • Provide a fully isolated control signal with very high levels of shielding and immunity.

PPM-DS-FOCable

From patch-leads through to cross-site cables, or optical adapters through to patch panels, PPM’s one-stopshop approach to fibre optic cable management offers a range of various high performance solutions designed to facilitate the quick and easy installation of all its fibre optic link products.

MS3-OM3227

Operation Manual for MS3 Magnetic Susceptibility Meter

MS2-MS2WFP-RS232-Cable-DR1042

MS2-MSWFP CABLE RS232 2M ASSEMBLY MS2-MSWFP CABLE RS232 2M ASSEMBLY

MS2K-DR1830

MS2K-DR1830 MS2K-DR1830 MS2K-DR1830 MS2K-DR1830 MS2K-DR1830

MS2F-DR0640

MS2F-DR0640 MS2F-DR0640 MS2F-DR0640 MS2F-DR0640 MS2F-DR0640

Model-5452-Field-Uniformity

Model-5452-Field-Uniformity Model 5452 Field Uniformity, I = 3.5A

Model_5201_mapa_data

Model 5201 Projected Field Electromagnet Field Map Data

MMS-1A-RS-Operating-Manual_US

Magnetic Field Mapper MMS-1A-RS is the high-end version of the SENIS Magnetic Field Mapping Systems. It allows users to perform a fast, high resolution mapping of magnetic flux density around permanent magnets, electromagnets or electronic circuit boards. The map of the magnetic field can be presented as color coded 2D or 3D visual displays on a PC screen and as a table of numerical measured values. Measured data are analyzed in real-time, which provide data analysis capabilities for an advanced inspection, characterization and quality control of permanent magnets.

ML_MAN_2025

The PT 2025 NMR Teslameter System (Fig. 1) comprises the following: • Bench-top main unit with RS 232C and (as an option) IEEE-488 interfaces • At least one NMR probe • A multiplexer if several probes are required

MFC3039-assembly-instructions

ASSEMBLY INSTRUCTIONS FOR THE MFC-3039 ROTATING PROBE-ARRAY HOLDER

Magnetics2016-SENIS-Presentation

Integrating Magnetic Field Mapping Crack Detection and Coordinate Measurement Author: S. Spasic, Senis AGPresented by: Ben Hartzell, GMW Associates

Magnetic-Field-Mapping-System-MMS-1A-RS

MMS-1A-RS, the high-end version of the SENIS Magnetic Field Mapping System allows users to perform a fast, high resolution mapping of magnetic field around an permanent magnets, electromagnets and electronic circuit PCBs. The map of the magnetic field can be presented as color coded 2D or 3D isometric visual display on a PC screen and as a table of numerical values of the magnetic field (each component Bx, By, Bz, Bxy, Btot, etc.).

Mag690U-DR2737

Mag690U Outline Drawing Mag690U Outline Drawing Mag690U Outline Drawing

Mag690FL-DR2664

Mag690-FL Outline Drawing Mag690-FL Outline Drawing

Mag670-OM2497

Operation Manual for Mag670 Single Axis Magnetic Field Sensor

ew-712b_gmw

EW-712B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-612b_gmw

EW-612B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-412b_gmw

EW-412B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

EQ-732L_MS-1380-E-00_120508-gmw

• Analog output voltage proportional to the magnetic flux density • Magnetic sensitivity 40mV/mT (typ.) • Supply voltage from 3.0V to 5.5V at single power supply • Operating temperature range from -40°C to 100°C • Ratio-metric analog output • 3pin single in-line package (SIP), Halogen free • Quick response 1μs (typ.) • Low output noise voltage 3mVp-p

eq-711l_e

EQ-711L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-433l_e

EQ-433L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

eq-431l_e

EQ-431L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-1771_e

EM-1771 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DS-DS-DSSIU-4-1U

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DS10000IBFS

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 11000A

DR0756

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DQ640ID-B

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DQ600ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A

DM1200ID

Ultra-stable, high precision (ppm class) fluxgate technology DM Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1500A

DL2000ID-CD100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

Degaussing1-Wand-DS2914

This mains powered, handheld instrument is used for removing accumulated magnetic fields. It generates an AC magnetic field which can be used to degauss magnetic shields or other equipment that have become magnetised through exposure to magnetic fields.

cwtultramini

The CWT Ultra-mini has an extremely thin, clip-around Rogowski coil of typically 1.6mm cross-section. Such a thin coil enables currents to be measured in the most difficult to reach parts of a power electronic converter with negligible disruption to the circuit under test.

CWT_MINI-instructions

PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

CQ-3300

CQ-3300 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ-2234

CQ-2234 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2063

CQ-2063 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CMC

PEM has developed a flexible, clip-around, current probe to measure high frequency common mode currents which flow around a motor drive to ground via the bearings in large AC drive systems.

CATALOG_AKM-Kit-and-Ref-Catalog

AKM Magnetic Sensors Engineering Development Kits Demonstration Modules Application Case Studies

BSS-02B-OM1741

Operation Manual for BSS-02B Magnetic Susceptibility Sonde

Brochure-MFC2046-US

Introduced 25 years ago, Metrolab’s NMR Magnetic Field Cameras have revolutionized field mapping for MRI magnets. They reduced acquisition times from hours to minutes, positioning errors to fractions of a millimeter, and they rendered human and drift errors negligible.

BPM-AFE.11flyer

BPM-AFE is an analog frontend to process RF signals from beam position pickup electrodes. It delivers an output signal which can be directly entered into fast 14-bit ADCs. It is specially developed for transfer lines and linacs. It can be customized to any RF frequency up to 1 GHz.

BI-MAG-01-CryogenicProbeDrawing

Low temperature Mag Probes type F (0.2mT) and type G (2.0mT)

BI_MAN_MAG03MC-CU-MAG03MS-CU-issue

BARTINGTON MAG-03MC-CU & MAG-03MS-CU CALIBRATION UNIT OPERATION MANUAL

BER_TN_CT-ES_FreqResp

BER_TN_CT-ES_FreqResp Bergoz CT performance report

BCM-IHR-manual

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

app-note-hts-1101-01

APPLICATION NOTE: HTS110-01 END CAP RESISTANCE AND HEAT SINKING FOR HTS CURRENT LEADS

AN0034-Mag-03-used-in-MRI-Controlled-Area-Safety

To increase worker safety within MRI suites and similar facilities by mapping magnetic field values and establishing proximity limits for ferromagnetic materials.

AN0015-Magnetic-Susceptibility-Measurements-Using-the-MS2-MS3-System

Magnetic Susceptibility Measurements Using the MS2/MS3 System

Ametes_360ASM_Spec

FEATURES • Analog and PWM outputs for 0 ± 180 degrees • 10% to 90% active range output signals • Resolution of up to 9 bits • Magnet “Out of Range” discrete output • User selectable “Zero Angle” set • No external parts required • Single 5V supply • Small 1/2” dia encapsulated package

AKM-RoHS_Statement

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

AK8779B

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8779A

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

AK8778B_MS1466-E-00_120906-GMW

The AK8778B is a Hall effect latch which detects both “vertical magnetic field” and “horizontal magnetic field” (perpendicular and parallel to the marking side of the package) at the same time. The pulse output F and direction output D are switched according to the vertical and horizontal magnetic fields applied to the device. The direction is calculated internally and output D is switched at a rising or falling edge of output F. The AK8778B is for use in the incremental pulse encoders or rotational detection systems.

AK8777B_MS1465-E-00_120906-GMW

The AK8777B is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The output OUTA and OUTB are switched according to the vertical and horizontal magnetic fields applied to the device. The AK8777B is for use in the incremental pulse encoders or rotational detection systems.

AK8776-MS1317-E-00_110715_GMW

AK8776 is a Hall effect latch which detects both “vertical” and “horizontal” (perpendicular and parallel to the marking side of the package) magnetic field at the same time and outputs the pulse (F) and rotational direction (D). AK8776 is for use in portable devices which uses rotational detection system or incremental pulse encoder such as jog dial utilized for input devices.

AK8775-MS1316-E-00_110715-GMW

AK8775 is a Hall effect latch which detects both “vertical” and “horizontal”(perpendicular and parallel to the marking side of the package) magnetic field at the same time. The result of Hall effect latch operation in vertical and horizontal magnetic field is read out to OUTA pin and OUTB pin. AK8775 is for use in portable devices which uses rotational detection system or incremental pulse encoder such as jog dial utilized for input devices.

ak8772_e

●Features ?Precision Bipolar Hall Effect Latch ?Power manageability through "PDN" pin 　Current consumption in Power down mode is less than 1μA ?Low current consumption at active mode : less than avg. 　150μA@VDD=3V ?Ultra small SON package : 1.1×1.4×t0.37mm, Halogen free

ACCT-S-198-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-178

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-122

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-S-115-MSH

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

18900480_A_1060-62_Probe_Sample_Location_Range

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11900211_A

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2212-1-Xm-Specification

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2171-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5972_Magnet_Control_Users_Manual

5972_Magnet_Control_Users_Manual USER’S MANUAL 5972 MAGNET CONTROL

5451 Magnet application

To avoid saturation, beam current transformers must be shielded from solenoid, quad and RFQ high stray fields.Good understanding of field distribution, shielding materials and techniques is required. Space availability imposes compact shields along the beam pipe.

5204_Brochure

The 5204 electromagnet is a projected vector field magnet providing field of any orientation at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible. A clear path exists all the way through with Ø2.5mm, this allows optical access from the beneath.

5203_PoleOptions

5203_PoleOptions Field Performance at Peak Excitation of 100A

5203_Eaton_Interlock_Logic

In an interlock event the protected power lines are disconnected, the unprotected lines remain powered. In this case, the power supplies lose power and the magnet is inert, the PC remains on.

3480-SN04-thermal-stability

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480_17907-0728-0_C_Tapered_Sleeve

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

002629

Electromagnets are used extensively in MR systems—hyperpolarized gas, prepolarized, and other low field imaging systems often use electromagnets for the main field, and conventional superconducting systems commonly use electromagnets for the shim and gradient coils. The field produced by an electromagnet is only as temporally stable as the current supply that powers it. The steady state accuracy of a current supply is fundamentally limited by noise and long-term drift of the control electronics, and the accuracy of a current supply subject to transient demands of a system, such as our Prepolarized MRI system, is fundamentally limited by the dynamic response of the coil itself.

55B0082-B

The 3MTS is a handheld Teslameter / Gaussmeter with integrated USB interface. It was developed in cooperation between the two companies SENIS and Matesy.

SPI Supplies Wet Cell II

The Wet Cell II is the next generation device for the examination of liquids in an EM environment.The self-contained high vacuum compatible device enables the analyst to characterize a fluid in its natural state. And as it is a self-contained device, there is no need for modification of the existing microscope. Once the liquid is loaded into the device platform, it is inserted into the microscope and is ready for analysis.

Quick and Easy Adaptation of Molecular Biology Technology to Tissue Embedment Polymerization

Using the SPI Cure™ with a standard heating block for 1.5 snap-cap conical tubes, at temperatures from 55–59°C, we have achieved safe and complete polymerization of LR White (acrylic) and SPI Pon (epoxy) resins in both protected and unprotected BEEM® capsules as well as 00-gelatin capsules. Please note that this report concerns a novel3 adaptation of dry-block heating technology designed for molecular biological procedures.In this test, we have purposefully used only resin blanks.Finally, we report that in the case of LR White, no degradation of the material of which the BEEM® capsules are constructed has been observed in either ‘protected’ or ‘unprotected’ heating regimes. We recommend careful testing of embedding molds not specifically mentioned in this paper.

SPI Supplies Plasma Prep™ X

The Plasma Prep™ X utilizes an anisotropic, parallel plate design to eliminate “undercutting” samples during the etching process. The system incorporates solid-state technology, an integrated vacuum gauge, and dual gas inputs for precise gas blending.

SPI Plasma Prep III™ Plasma Cleaner

Tabletop plasma cleaner designed for the removal of ontamination on TEM specimen holders and their samples Based on the highly successful Plasma Prep III, the Plasma Prep III Plasma Cleaner is designed to run at a lower power (1–10 watts) in order to clean TEM specimen holders. By combing the low power with the use of argon gas, surface contamination can be removed from TEM specimen holders (and specimens as well), without etching the actual sample or sample holder assembly.

5001/5002-AB Silver Paint

The SPI #5001-AB and #5002-AB Silver Paint Product (the same product in two different size bottles) is a highly concentrated suspension (43% ±3% silver solids) of specially prepared and tightly controlled high purity silver powder combined with a highly effective organic suspending and binder system.

FlipScribe

FlipScribe takes scribing to a new performance level, making clean, straight scribe lines on the back side to accurately cleave front side targets, bonded wafers and other substrates. This method eliminates contamination of sensitive front side devices during the scribing processes and is valuable for both crystalline and amorphous samples.

Apiezon AP101 Anti-Seize Vacuum Grease Datasheet

Apiezon AP101 is an excellent generalpurpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. The key features of AP101 are shown in the table opposite.

美国ARS公司CS210AE-GMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。