美国ARS 管状闭循环低温恒温器 X-3

我司在清华大学顺利完成美国ARS闭循环无液氦低温恒温器验收工作

近日我司在清华大学顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）闭循环无液氦低温恒温器验收工作，并针对仪器操作及日常维护进行了培训。

TMI Introducing CCS sensors

A CCS sensor is predominately a carbon ceramic amalgam housed in a hermetically sealed ceramic coating. These resistors were originally developed as electronic components which would survive high radiation fluxes (they are able to withstand neutron radiation in excess of 1017N/cm2)

VIS-Datasheet-V25-1550M-module

High-speed transmitter module for test purpose with integrated 1550nm VCSEL fiber coupled to a 9/125 µm single mode fiber for optical output. The module is designed as engineering sample for high speed test applications.

VIS-Datasheet-D30-850M

These high speed photodetector modules consist of a GaAs pin photodetector integrated with a 50 µm-core diameter multimode fiber for optical input. The responsivity is greater than 0.4 A/W at 850 nm. The modules are engineering samples and use an optional external DC bias

VIS-Datasheet-A56-230C_v1-1

The A56-230 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 200 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.

Product-Catalog-2021

VI Systems GmbH (VIS) is a developer and manufacturer of optoelectronic components for optical communication, consumer and automotive applications. In the field of optical communications VIS offers optical components, such as vertical cavity surface-emitting lasers (VCSELs) and PIN photodiodes capable of up to 224 Gbps per channel and beyond. VIS VCSEL driver and PIN amplifier integrated circuits operate up to 56 Gbps with NRZ modulation. The latest generation of VCSEL and PIN photodiodes allow 400 Gbps PAM-4 energy efficient data transmission over one fiber with four channel short wave division multiplexing (SWDM) at 850 / 880 / 910 and 940 nm wavelength.

Model SD-6-15 Storage Dewar Magnet System

Model SD-6-15 Storage Dewar Magnet System • 6 Tesla magnet with vertical access • Low-loss liquid helium storage dewar • 4K sample insert

Opti-MAxesTM Model OPMX-141-1

Opti-MAxesTM Model OPMX-141-1 Superconducting Magneto-Optical Vector Magnet System

MaxesMX-4.5-9-30

MAxesTM Model MX-4.5/9-30 Superconducting Vector Magnet System

tube-inspector Flyer English

The tube-inspector is an automated system for the fast and precise measurement of tubular targets. It was developed to analyze coated pipes and tubes (e. g. rotational targets) before and during the production process. The system provides information about the quality of the process and the lifetime of tubular targets. Parameters, such as the diameter, ellipticity and deflection can be determined.

tube-inspector Flyer German

Der tube-inspector ist ein automatisiertes System zur geometrischen Vermessung von Rohrtargets und Magnet Bars. Das System wurde für die Analyse beschichteter Rohre und Leitungen (bspw. rotierende Targets) vor und während des Produktionsprozesses entwickelt. Hierzu gehören Aussagen über die Qualität des Prozesses sowie die Lebensdauer der Targets.

magtrack Flyer German

Das magtrack System basiert auf dem magnetischen Marker Monitoring Verfahren und wurde entwickelt, um die Bewegungsabläufe in geschlossenen Systemen aufzuzeichnen, zu analysieren und gegebenenfalls zu optimieren. Mit dem magtrack ist es möglich, die absolute 3D-Position im Raum sowie die Rotation eines magnetisch markierten Partikels zu detektieren. Das magtrack System ist modular aufgebaut und kann somit an beliebige Anlagen und Systeme angepasst werden.

cmos-magview Flyer German

Der cmos-magview ist ein digitales magnetooptisches Auslesesystem zum schnellen und präzisen Visualisieren magnetischer Streufelder. Das Sensorsystem erlaubt eine Echtzeit-Magnetfeldanalyse und ist für die Qualitätsprüfung von Magneten geeignet. Visualisiert werden Streufelder von,beispielsweise, Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten. Eine intuitive Anwendungssoftware übernimmt die Darstellung mithilfe von Falschfarben.

Photoluminescence光致发光

光致发光(PL)光谱是一种广泛应用于半导体和分子的光学和电子性质表征的技术。PL 是任何形式的物质在吸收光子后的光发射过程。入射光子在可见区域激发它的一个电子到激发态。然后，当电子返回 到较低能态时，它会辐射一个光子。在量子力学中，能带是量子化的，这意味着只有某些跃迁是允许的。因此，发光的能量峰被认为是不连续的。

Ellipsometry

Ellipsometry is an optical method to derive the dielectric properties of thin films. Polarized incident light is reflected obliquely from the surface of the sample to generate ellipse of polarization reflected light in terms of amplitude ratio and phase difference, which is measured by a spectroscopic ellipsometer. Information about composition, roughness, thickness, doping concentration and other material characters can be yielded through it. Intrinsic physical properties of thin films can also be studied by the temperature dependence of ellipsometry.

Ellipsometry椭圆偏振技术

椭圆偏振法是一种测量薄膜介电特性的光学方法。偏振光从样品表面斜反射，产生偏振反射光的振幅比和相位差椭圆，用椭圆偏振光谱仪测量，成分、粗糙度、厚度等信息，通过它可以得到掺杂浓度和其它材料特性。薄膜的本征物理性质也可以用椭偏仪的温度依赖性来研究。

DiamondAnvilCell

Diamond Anvil Cell (DAC) is an experimental component that generates extreme pressure by compressing a small piece of material with two opposing diamonds. The pressure can normally go up to 100-200 GPa. The goal of this technique is to simulate the deep inside planet environment to synthesize materials and observe phases that don’t happen under normal ambient atmosphere. The sample is able to be viewed through diamonds and also allows optical measurements, such as X-ray diffraction, Mössbauer, and photoluminescence. Commonly, the sample can be heated by resistance heating up to 1000 °C or laser heating up to 5700 °C. DAC experiments also can be operated at cryogenic temperatures for different purposes.

ThermoelectricEffect热电效应

热电效应是热和电之间的关系。当器件的两侧产生温差时，材料中的载流子从热的一端扩散到冷的一端，从而在期间上产生电压。相反，当施加电压时，热量从一端传递到另一端，行程温度梯度。热电效应一般由塞贝克Seebeck 效应、佩尔蒂埃Peltier 效应和托马森Thomason 效应三种效应组成。

Magnetotransport

When quantum materials, especially 2D materials or multilayers, are subject to the magnetic field during the electron transport at low temperatures, the trajectory of the electrons and the electronic spins need to be taken into account. Quantum Hall effect, a quantum mechanical version of the Hall effect, is one of the phenomena. It is frequently used to characterize modern quantum materials with magnetoresistance.Magnetoresistance is a phenomenon of change in the resistance when a sample submitted to a magnetic field.When a sample contains ferromagnetic metals, the interplay of the magnetization of the sample and spin-polarized current is involved. The electrical resistance may chance through magnetoresistance effects that originate from different physical phenomena, such as giant magnetoresistance and tunnel magnetoresistance effects, which lead to the subject of Spintronics.

Magnetotransport磁输运

当量子材料特别是二维材料或多层材料在低温电子输运过程中受到磁场的作用时，需要考虑电子的运动轨迹和电子的自旋。量子霍尔效应是霍尔效应的一种量子力学形式。它经常被用来表征具有磁电阻的现代量子材料。磁电阻是样品在磁场作用下电阻发生变化的现象。当样品中含有铁磁性金属时，样品的磁化强度和自旋极化电流的相互作用。电阻可以通过各种物理现象产生的磁电阻效应来实现，如巨磁电阻效应和隧道磁电阻效应，从而引出自旋电子学的研究课题。

ElectronTransport电子输运

在经典物理学中，当电势通过一大块金属或半导体施加时，将驱动载流子，电阻可由欧姆定律得出，这种效应被称为电子输运，是表征材料特性最常见的技术之一。通过该技术可以观察到许多现象，如电导率、电子迁移率等。当材料的尺寸缩小到可以与德布罗意波长或非弹性散射长度(二维材料、纳米线和量子点)相媲美时，在低温下就会出现量子现象，例如二维材料的弱局域化和量子点的单电子。四探针法通常用于电子输运，以消除引线和接触电阻，从而获得更精确的测量结果。

Parahydrogen

Parahydrogen is one of two magnetic forms of hydrogen gas (H2). It’s commonly used to increase the sensitivity of NMR and MRI measurements. Molecular hydrogen consists of two atoms. Each of the atoms has a spinning nucleus. Based on the direction of the nuclear spin, there are two types of hydrogens. If the spins of the two hydrogen nuclei are aligned, it’s orthohydrogen. If the spins are opposed, it’s parahydrogen.In general, hydrogens is an equilibrium mixture of ortho- and para-hydrogen. There is a tiny energy difference between the two magnetic states.

ElectronParamagneticResonance(EPR)ElectronSpinResonance(ESR)

Electron paramagnetic resonance (EPR)/electron spin resonance (ESR) is an important method to study unpaired electrons in organic and inorganic radicals, transition metal complexes, and some biomolecules.When paramagnetic compounds with unpaired electron spins are under magnetic fields and electromagnetic waves, normally in the microwave range of frequency, the transition between spin states is induced. The measurement is generally carried out with constant frequency, while the magnetic field varies. EPR/ESR spectrometer measures the absorption of electromagnetic radiation. Due to the short relaxation times of electron spins, EPR/ESR must be performed at cryogenic temperatures.

Instrumentation Feedthroughs

Electrical Instrumentation Feedthroughs — Hermetic glass-to-metal seal feedthroughs are designed to meet Accu-Glass Products standard Subminiature-C™, Mil-DTL-26482 Circular and industry standard Subminiature-D configurations. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies using compatible materials such as PEEK, Kapton® insulated wire, stainless steel and DAP are just some of the vacuum compatible materials used to provide complete in-vacuum wiring. Air-service Cable Assemblies — Industry standard cables and connectors are utilized to provide the end user with complete connectivity solutions from bench equipment to the feedthrough flange.

我司在北京某高校成功安装美国ARS用于瞬态光栅的超稳型低温恒温器

美国ARS是一家世界级低温系统生厂商，创立于1986年，致力于为科研工作者提供1.5-800K低温解决方案。 ARS以研发为重点，生产的低温设备随着科学研究领域的不断变化而不断发展，为您提供最先进的低温设备。 ARS在全球拥有训练有素销售及技术团队，为客户提供售前售后技术支持，并以合理的价格为客户选择适合客户需求的低温设备。X20-OM超低振动超精细闭循环恒温器是特别为光学显微实验设计，如显微-光致发光(Micro-PL)，显微拉曼等。

LT4-FTIR

LT4-FTIR系列连续流恒温器是性价比高的FTIR连续流恒温器，专门用于FTIR低温测试。 LT4-FTIR既可以使用液氦也可以使用液氮进行工作。该系统包含标准的传输管线和冷指，也可根据客户需要进行定制。

X-15EPR闭循环低温恒温器

X-15系列低温恒温器专为低温电子顺磁共振（EPR）和电子自旋共振（ESR）而设计。O圈密封的石英样品小池使得系统可在不拆卸整套设备的前提下方便换样。可选蓝宝石或铜样品管。

B-UHV型闭循环低温恒温器

B-UHV系列闭循环低温恒温器是真正的UHV真空系统，真空度可达10-11 Torr，与其他产品不同的是该产品全部用焊接接头及金属密封代替了橡胶O圈密封。在制冷机上直接焊接了一个CF法兰。 B-UHV系列恒温器的冷头可烘烤到80℃，移除冷头置换器之后可以烘烤到200℃。 B-UHV系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

我司在香港浸会大学顺利完成美国ARS高低温超宽温区低温恒温器验收工作

近日我司在香港浸会大学顺利完成美国ARS（ADVANCED RESEARCH SYSTEMS）高低温超宽温区低温恒温器验收工作，该款低温恒温器为完全无液氦系统，温度测试范围从10K-800K，为客户的光电测试提供了超宽的温区操作，是宽量程测试的首选。

X-3管状闭循环低温恒温器

X-3管状闭循环低温恒温器尾部为管状结构，尾部空间可以设计得更加紧凑，适合插入更狭小的空间，如超导磁体或电磁铁中，非常适合磁化率或霍尔测试。另外X-3恒温器没有光学窗口，减少了热辐射，降温更快。 X-3恒温器的尾部可以根据客户要求定制成不锈钢或铝制材质。 X-3系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

LT3-OM显微型连续流低温恒温器

LT3-OM 恒温器专为显微拉曼设计，也适用于其它各类低振动要求的光学显微实验。1.52 英寸的样品腔设计使得该恒温器可用于大多数显微测试台。它拥有连续可调的样品座，利于用户更好调节工作距离。

ds.cs210-x3

Closed Cycle Cryostat for Non Optical Experiments, sample in vacuum. The CS-210 is a high power cooler with fast cooldown and high cooling power on both stages.

ds.windowmaterials

Optical specifications of window materials. ARS cryostats are available with a large selection of optical windows for UV, Vis and IR experiments. UV - .1 to .3 Microns (100 - 300 Nanometers) VIS - .3 to 1 Microns (300 to 1000 Nanometers) IR - 1 + Microns ( 1000 nanometers)

HeliumReliquefierRD2017000-C1.DE215

The Helifier provides an economical way to recover helium exhaust from laboratory cryostats and liquefy it for continued use. Cooled by the powerful ARS CS215S cryocooler the Helifier will generate liquid helium at a rate of 18L/day and store up 100 liters of liquid which is roughly a weeks worth of normal helium usage for cryostat applica-tions.

DS-superconducting-magnet-probe-station

The ARS Closed Cycle Superconducting Magnet probe station model is designed for the ultimate in flexibility for non-destructive device testing. This system enhanced with a 3T Vertical superconducting Magnetic Field. Those systems are ideal for the study of magneto-optical and magneto-electrical properties in variety of experiments, including quan-tum dots, spintronic devices and nanoscale electronics. The probe con-figuration and system design can be customized to suit your specific experimental requirements.

tn2xrdd5003

Bruker manufactures the X-ray diffraction equipment and user references are given at the end of this note. The ARS cryocooler permits the user to characterize the samples over a very large temperature range with out the need for liquid helium. ARS has supplied the cryocooler to customers with the D-500 and D-5000 system. Bruker has incorporated the cryostat to the newer D-8. This is available directly from Bruker. The ARS design has the advantage of placing the cryocooler through the bore of the diffractometer and bolting the cryocooler to the sample mounting flange of the diffractometer. The sample holder extends out the front of the machine to align with the x-Ray beam.

DS-CS204AF-DMX-20-OM

The DE204*F-DMX-20-OM is our Ultra Low Vibration Closed Cycle Cryostat for Optical Micrscopy applications such as MicroRaman and Micro Photoluminescence. The DE204*F-DMX-20-OM uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This pre-vents almost all vibration from being transmitted to the sample. Sample vibrations of 3-5 nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 4-5K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS204AF-DMX-20B

The CS204*F-DMX-20B opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The ARS manufactured DMX-20B interface, like our “B” series cold heads is a True UHV System (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joings and metal seals. A CF flange is The DE204*F-DMX-20B uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling capacity is roughly cut in half at varying temperatures.

μdrift彩页

温度范围： 4K-500K 防热辐射屏安装有冷窗，更好的保证最低 温时的温度稳定。 振动： 3-5nm 峰-峰振动 @2.4Hz <1nm 更高频率

uDriftmicroscopycryostat

High Performance ULVD Cryostat will feature: •Ultra Low Vibrations. •Ultra Low Drift in XY. Wide temperature range. •Ultra Low Drift in Z axis. Wide temperature range. •UHV compatible materials. •UHV design. Stainless body. •Piezo positioners, XYZ. Available as options •Large breadboard capability. •Cold objective in sample chamber for Near Field Optical Experiments. •Side and top mounted optical windows. •Low noise wiring. •RF and DC •Monolithic frame for easy installation.

DS-LT3-WMX-1SS

The LT3-WMX-1SS offers a wide range of flexibility at a reasonable cost. This high performance systems offers an all stainless steel constructed vacuum shroud along with a welded stainless steel instrumentation skirt. This system is capable of achieving vacuum levels of 10-7 Torr with an appropriate vacuum system. The nickel plated copper radiation shield provides low emissivity which is ideal for low temperature experiments.

DS-LT3OM_LT3BOM

The LT3-OM and LT3B OM (UHV) are designed for optical microscopy and nano-photonics with unique features not found in other cryostats. In addition to the slim 1.52” (LT3 OM) profile that allows it to fit on most microscope stages. The LT3/(3B)-OM have a continuously adjustable sample holder, ena-bling the user to fine tune the placement of the sample within the working distance of their micros-copy system.

DS-LN400

The LN400 is our lowest cost liquid Nitrogen cryostat, for optical and electrical experiments. This simple and inexpensive Liquid Nitrogen cryostat offer a variable temperature sample environment from 77K to 500K. Our standard 800K interface is also available. Temperatures below 77 K can be achieved by pumping on the exhaust port.

DS-CS210AF-GMX-19OP

The OmniplexTM, DE210*F-GMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-210 cryocooler for high cooling power and fast cooldown. The helium vapor is particularly useful for cooling samples that do not conduct heat well. The ARS OmniplexTM systems features large optical access and quick sample change. The OmniplexTM comes with 4 window ports and with warm and cold windows. The sample stick can use any of the standard ARS sample holders as well as receive a second set of temperature control instrumentation for fine tuning of the sample temperature. The system allows for a fast intial cooldown (~90 min to 20K and 2 1/2 hrs to base temperature).

DS-CS204AE-FMX-1AL

The CS204*E-FMX-1AL offers a wide range of flexibility at a low cost, making it an excellent choice for most sample and device testing. This system offers similar features as the CS202*E-DMX-1AL, however it offers almost twice the cooling capacity making this system less sensitive to experimental and parasitic heat load changes, sample size, number of wires, windows, etc.

NEWT-Litz-Book

Litz wire consists of a number of individually insulated magnet wires twisted or braided into a uniform pattern with the primary benefit of reducing AC losses in high frequency windings. New England Wire Technologies offers unlimited Litz wire constructions with multiple types of insulation to meet agency and/or specific customer voltage withstand requirements.

美国GMW-hw-300b_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hw-105a_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hs-0111_gmw

Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems.

美国GMW-hq-8220_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0715

HG-0715 HG-0715は、超小型SON形状GaAsホール素子です。 標準はテーピングリール供給です。（10,000pcs.／Reel） 注意： 弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読みください。

美国GMW-hg-302c_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-302a_gmw

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff.Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-116c_e

These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products.

Worktop Elobau 3012015

Worktop Elobau 3012015 Worktop Elobau 3012015 Worktop Elobau 3012015

Wada-FCT

For any experiments that use beams of an accelerator,monitoring the beam intensity is always an important concern. It is particularly useful if one can continuously measure the beam current without disturbing the beams. Counting elastic scattering particle from the target is often used for such a purpose,however, the dynamic range of measurable beam intensity is limited and the calibration often changes for different experimental conditions.

VWM-S-1W-A60mm-MainView

VWM-S-1W-A60mm-MainView VWM-S-1W-A60mm-MainView VWM-S-1W-A60mm-MainView

vwmdatasheet

Beam transverse profile and position Beam Halo measurement

VWM_choice

VWM-S-1W sensor parameters choice (VWM_choice_Rev3.0 program)

transverse-mag-probes-C-and-E

Transverse Mag Probes type C (0.2mT) and type E (2.0mT)

TNG3DTM007a

A Group3 digital teslameter, model DTM-151, was tested to IEC1000-4-4, level 3, and passed to performance criterion B.

THM1176_technote_Metrolab

Here are the results of a quick and dirty experiment using our THM1176-HF calibration setup, shown below. The sensor is mounted in a small carriage, which in turn slides into one of the slots of the calibration fixture (blue string to pull the carriage back out of the slot). A heater is mounted on the bottom of the calibration fixture (white wires), and a thermocouple thermometer slides into a hole just below the sensor (blue wire).

Spacemag_Lite_OM3777

Operation Manual for Spacemag-Lite Three-Axis Magnetic Field Sensor

SN-DS-hall-probe-h-for-f1a-mft

Hall Probe H for F1A Magnetic Transducers is a very thin (1.1mm) and long (42mm) single-chip fully integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-g-for-f3a-mft

Hall Probe G for F3A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (42mm) single-chip fully integrated 3-axis Hall-Probe.

Shape-C-SMA

CURRENT TRANSFORMER- SHAPE C/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE C/SMA CONNECTOR

Sentinel3Brochure

Sentinel 3 is the most advanced RF over fiber test and measurement system for: • EMP test and EMC conformance • HIRF aircraft clearance • Simulated lightning testing • Impulse / time domain / NEMP testing • Low and high level swept frequency coupling measurements

SCU1-OM2441

Operation Manual for SCU1 Signal Conditioning Unit

s-bpmdatasheet

Non-interceptive beam position measurement For linacs, microtrons and transfer lines Single bunch, macropulse and CW Beam charge range > 1000

rotating-stage_rftm

? Direct-drive concept provides faster rotating speeds and enhanced position sensitivity ? Ultra-low profile design – only 45 mm in height ? High efficiency DC step-motor optimizes available torque ? Proprietary glass scale encoder ensures 0.005°repeatability ? 6 mm diameter through-hole for convenient cable routing

RCTrms3ph

The RCTrms-3ph is a 3-Channel ac current transducer for permanent installation. Simple to install and easy to retrofit it combines the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of ac current.

RCTi-INS

The RCTi is a wide-bandwidth, flexible, clip-around current transducer for measuring ac currents.PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer

RCT1A-Dimensions

RCT1A-Dimensions RCT1A-Dimensions RCT1A-Dimensions

RCT1A-current-transformer-comparison

These technical notes should be read in conjunction with the RCT1A and RCTi technical notes and short-form datasheets. This document is intended to draw an analogy between instrument (metering) class CTs and flexible, clip-around, Rogowski current transducers so that the user can make an informed choice about the suitability of using our RCTi, RCTi-3ph or RCT1A in place of an instrument (metering) class CT.

Product-Range-Magnetometry-DS0100

Fluxgate Magnetometers and Gradiometers Product Range

PPM-DS-p2p-PowerSleeve

The PowerSleeve has been developed by PPM to allow the complete range of AC and DC point2point fibre optic plug in modules to be battery powered. Now users have the ability to take standard transmit or receive modules and fit it into the PowerSleeve instead of relying on mains power. This option is particularly important when locating point2point modules in remote locations that have limited access, where galvanic isolation is required or where no mains power supply is present.

PPM-DS-p2p-DCLink

The new DC point2point link is capable of transmitting analogue signals of up to 40MHz over singlemode fibre. This is equivalent to rise times of 10.3ns making it ideal for measuring HV transients on HVDC transmission lines. The modules are available in a fully EM shielded casing, or as a plug-in module for use with the various point2point housings.

Performance_Comparison_Coreless

Performance Comparison of CQ330x Series Current Sensors (for industrial inverters)

PEM-TN-CWTUM-HighFrequency

High Frequency Bandwidth High Frequency Bandwidth High Frequency Bandwidth

PAC1989_1993

? The connector body is connected to the cable shield. ? The wires at the end of the cable are soldered about 10mm.

NPCT-manual

New Parametric Current Transformer User’s Manual New Parametric Current Transformer User’s Manual

NPCT-datasheet

DC beam current non-destructive measurement The New Parametric Current Transformer is the latest evolution of the Unser Transformer, commonly called DCCT, developed at CERN in 1966 by Klaus B. Unser.

NPCT-CF4-5-60-4-120-w

NPCT-CF4.5"-60.4-120/1.0 NPCT-CF4.5"-60.4-120/1.0 NPCT-CF4.5"-60.4-120/1.0

NPCT-115

NPCT-115 NPCT-115 NPCT-115 NPCT-115 NPCT-115 NPCT-115

NPCT-75

NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75 NPCT-75

NanocrystallineVITROPERM-EMC-Products

Nowadays power electronics have a decisive influence on the technology of electrical energy generation, distribution and conversion. Modern semiconductors enable electrical energy to be controlled and converted rapidly and safely with low losses. However, using today’s fast switching technologies results in significant network disturbances.To minimize these disturbances and stabilizing electric networks, EMI filters according to latest international standards must be used. VAC’s VITROPERM® EMC products make a significant contribution in building innovative and compact filter designs with lowest losses.

MX-BPM.manual

Multiplexed Beam Position Monitor User’s Manual Multiplexed Beam Position Monitor User’s Manual

MX9-07-5201_E_Proj_Field_Magnet_Complete

USER’S MANUAL MODEL: 5201 PROJECTED FIELD ELECTROMAGNET

MS2WF-DR1928

MS2WF OUTLINE DRAWING MS2WF OUTLINE DRAWING MS2WF OUTLINE DRAWING MS2WF OUTLINE DRAWING

MS2-RS232-Cable-DR1615

MS2 RS232 Cable MS2 RS232 Cable MS2 RS232 Cable MS2 RS232 Cable

MS2G-drawing

MS2G magnetic susceptibility sensor MS2G magnetic susceptibility sensor

MS2D-DR0641

MS2D-DR0641 MS2D-DR0641 MS2D-DR0641 MS2D-DR0641 MS2D-DR0641

MS2B-DR0305

MS2B-DR0305 MS2B-DR0305 MS2B-DR0305 MS2B-DR0305 MS2B-DR0305

MotorDrive2016-GMWPresentation

Accurate Power Conversion Measurements on High Power Motor Drives

MMS-1A-RS-Standard-Samples-and-Maps

MMS-1A-RS is the high-end version of the SENIS 3-axis Magnetic Field Mapping System that allows users to perform a fast, high resolution mapping of magnetic field around permanent magnets, electromagnets and electronic circuit PCBs. The map of the magnetic field can be presented as color coded 1D, 2D or 3D isometric visual displays and as a table of numerical values of the magnetic field and the geometrical coordinates of measured points. The measured data analysis is performed during the mapping of the magnetic field, so that calculated data required for the analysis can be visualized immediately after the mapping.

MLVMCTRL-GMW-Magnet-Control-Software-manual

USER’S MANUAL MODEL: LVMCTRLLABVIEW MAGNET CONTROL

Matesy-MO-PRES-MagnetoOpticalDomainAnalysisElectricalSteel

Matesy GmbH Steel domain analysis with the magneto-optical sensor system CMOS-MagView

Matesy-MO-ARTICLE-MagnetoOpticalSensors

The use of magnetic materials for manufacturing and in research has grown dramatically. The importance of magnetic measurement and testing applications will continue to rise corresponding to technological trends such as electric mobility, robotics, miniaturization and automation technologies, as well as promising magnetic materials (e.g., polymer-bonded magnets and magnetic shape memory alloys). At the same time, growing demand for sensors for use in static and dynamic magnetic measurement applications have pushed established sensor technologies to their limits. Magneto-optical sensor technology offers entirely new perspectives in the field of magnetic measurement and testing.

Matesy-MAN-MO-Sensor-Instructions

Magneto-optical (MO) sensors are a new and innovative tool for observing the structure of magnetic information in magnetic materials. They can visualize two dimensional profiles of magnetic fields with nearly optical resolution using the Faraday Effect in real time thus allowing to analyze fields by a magneto-optical image. The sensor works in direct contact to the magnetic material. The MO sensor is made up of four layers: substrate, magneto-optical film, mirror and protection layer (Figure 1). The thin mirror layer is been upset on the MO layer to enable a light reflection during the application.

Mag690U-DR2737

Mag690U Outline Drawing Mag690U Outline Drawing Mag690U Outline Drawing

Mag690-MX-DR2690

Mag690-MX Outline Drawing Mag690-MX Outline Drawing

Mag670-DS2497

Mag670-DS2497 Mag670 Low Cost Single Axis Magnetic Field Sensor

EW-632

EW-632 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-412b_gmw

EW-412B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-400_gmw

EW-400 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

eq-430l_e

EQ-430L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em-6781_gmw

EM-6781 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

em3242-reel

EM-3242-T５【Product Specification】 EM-3242-T５【Product Specification】

em-1011_gmw

EM-1011 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC.

DTM-151-G_Manual_-S5

DTM-151 DIGITAL TESLAMETER with IEEE-488 GPIB Interface USER’S MANUAL

DTM-133-S

DTM-133 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-130-G-DTM-141-G-Manual

Complete 4-channel system interface unit for ultra-stable, high precision fluxgate tech-nology DS series current transducers.

DS2298-Mag-648-649

This range of three-axis fluxgate sensors offer sensitive low noise magnetic field measurements together with exceptionally low power consumption. Their compact size and battery powered operation make these sensors ideal for surveillance and perimeter security applications.

DS1000UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1100A

DS300ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 500A

DS200UB-1V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 330A

DS200ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

DS50UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 55A

DS.200.3MTS-TESLAMETER.18_USB-Handheld-Teslameter

The 3MTS is an easy-to-use handheld Teslameter/Gaussmeter to measure all 3 magnetic field components simultaneously within a very small a volume. It comes in two different versions.

DR1395

DR1395 MS2 magnetic susceptibility meter MS2 magnetic susceptibility meter

DR0995

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0745

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DQ600ID-P1300

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1300A

DM1200UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DM Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1320A

Diff-to-SE-Adapter-3DSA-05

The 3DSA-05 converts three differential voltages into three corresponding single-ended voltages with respect to an external ground reference. The 3DSA-05 can be used as an extension of the electronic module (Module E) of SENIS’s 3-axis magnetic flux density to voltage transducers: it enables measurement of the transducer output voltages using the instruments that have single-ended inputs (such as oscilloscopes).

Data-Acquisition-Units-DS2519

Bartington Instruments’ data acquisition and conditioning units accept analogue inputs from most of our sensors and output the signal in either analogue or digital format, depending on the unit selected.

CZ-3703

CZ-3703 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWT-instructions

PEM?s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer

CWT_Mini50HF

Introducing the NEW CWTMini50HF, an extension of the CWTMiniHF range for even faster transient current measurement

CU2-Connection-DR4034

CU2-Connection-DR4034 Operation Manual for CU2 Closed Loop Module

CSA-KIT-summary

Sentron’s CSA-1VG is a single-axis integrated magnetic field sensor based on the Hall Effect. The circuit is fabricated using a conventional CMOS technology with an additional ferromagnetic layer. The ferromagnetic layer is used as a magnetic flux concentrator providing a high magnetic gain. Therefore, the circuit features very high magnetic sensitivity, low offset, and low noise. The CSA-1VG is packaged in a standard SOIC-8 full plastic package. This package provides high voltage isolation to the current conductor on the PCB (up to 600V) .

CQ-2366

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2232

CQ-2232 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2065

CQ-2065 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2064

CQ-2064 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ320A

CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A CQ320A

CQ209x

?? Small-sized surface mount package with magnetic core and current conductor ?? Hybrid Hall IC with semiconductor Hall elements for high sensitivity ?? Current conductor electrically isolated from sensor IC ?? 5V single supply operation ?? Analog output voltage proportional to AC or DC currents ?? Low noise output: 2.1mVrms ?? Fast response time: 1μs to step input current ?? Factory-adjusted sensitivity and offset voltage for high accuracy ?? Flat temperature dependence by compensation circuits ?? Ratiometric output

CPCO-XXXX-160-07

The CPCO Series (160mm) Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of ±4000A ±8000A, ±12000A with an accuracy of +/-1% and non-linearity of <+/- 0.5%. The bandwidth is dc to 40kHz. The Current Probe splits along a diameter allowing easy installation to existing cables without having to break the connection. A captive screw is used rather than a clip to ensure consistent closure under mechanical loading or vibration.

CERN-68-13

AKM Magnetic Sensors Engineering Development Kits Demonstration Modules Application Case Studies

calibration-tool-mfcsv1-2

The SENIS MFCSv1.2 Calibration Set for magnetic field measurement is provided as an accessory for permanent magnet mapping applications, such as SENIS MMS (All-in-One Magnetic Field Mapping System). The MFCS is used to precisely determine the location of a Hall elements sensitive area.

BSS-02B-mechanical-interface

BSS-02B mechanical interface BSS-02B mechanical interface

BPM-AFE.11flyer

BPM-AFE is an analog frontend to process RF signals from beam position pickup electrodes. It delivers an output signal which can be directly entered into fast 14-bit ADCs. It is specially developed for transfer lines and linacs. It can be customized to any RF frequency up to 1 GHz.

BBM

The Ametes Bus Bar DC Current Sensor locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC sense the magnetic field as a function of current on both sides of the bus bar. This enables effective cancellation of external magnetic fields without magnetic cores or shielding which can give rise to non-linearity and hysteresis effects.

BB-BPM.manual-2.3

BB-BPM.manual-2.3 Baseband Beam Position Monitor User’s Manual

Bartsoft-Mobile-OM2518

Bartsoft Mobile software acquires, corrects, displays, stores and prints data using Bartington Instruments MS3 meters. This guide explains how to use the software and helps the user understand how it works, including the function of all controls and windows.

axial-mag-probes-B-and-D

Axial Mag Probes type B (0.2mT) and type D (2.0mT)

APEC

The practicalities of measuring fast switching currents in power electronics using Rogowski probes

AN0032-Mag-03-for-Payload-Attitude-Control-on-Sounding-Rockets

To contribute to payload attitude control on board sounding rockets by providing accurate data on the Earth’s magnetic field.

AN0027-MRI-site-survey

To increase efficiency and safety by helping to survey the sites of MRI and electron microscope facilities before installation.

AN0022-Mag-01H-used-for-Verification-of-Magnetic-Shielding

To measure the effectiveness of magnetic shielding using magnetometer measurements.

AN014_p2p_Dynamic_Range_3407

PPM offer a range of AC coupled point2point Fibre-Optic-Links. The noise and linearity performance of these links is specified in the relevant data sheets. This application note explains the definition of these terms, and the calculations that may be used to determine additional performance parameters that may be of use in a particular application.

AN0002-Applications-of-Three-axis-Fluxgate-Magnetometers

Magnetic Resonance Imaging (MRI) equipment requires the generation of stable magnetic fields, and the resolution of the measurements may be limited by interference from external magnetic fields and vibration.

AN_BBM-01

This AN_BBM-01 provides guidance in sizing bus bars to obtain the desired BBM-01 Bus Bar Module sensitivity for DC currents. The BBM-01 determines the current in the bus bar by measuring on both sides of the bus bar, the magnetic field generated from the current through the bus bar. The magnitude of the magnetic field at the sensor is a function of the width and thickness of the bus bar as well as the current through the bus bar. This guide provides the output Sensitivity in mV/A for the BBM-01 as a function of bus bar width and thicknesses for various standard Imperial dimensioned bus bars.

AN_181-Application-Note-EM-3242

The AKM EM-3242 Non-Contact Angle Position Sensing IC is a very small, low cost and easy to use angle position sensor with a continuous 360 degree range. The EM-3242 provides an absolute position output which means the power can be removed then reapplied and the output will continue to have the correct angle even if the rotating magnet moved while the power was off. The device requires very little power and operates at 3V+/-10%. The EM-3242 senses the angle of magnetic field component that is parallel to the plane of the device package and provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The device includes a power down ( PDN ) function which reduces the current draw to less than 10uA.

AN_174KIT-Specification

The AN_174-X KITs provides a convenient method of evaluating the AKM CQ-330X Series SMT current sensing IC’s . There are four versions of the kit available to evaluate the CQ-3300, CQ-3301,CQ-3302 and CQ-3303 sensors. All kits have a maximum continuous current limit of 20Arms .The kits come with the CQ-330X IC and Capacitor mounted and can be used without any additional components.Included are additional parts that can be used by the customer to customize the kit to provide different connection schemes.

AKM_DS_EM3242-AngleSensor

□ Small absolute rotary encoder □ Small input device (mode selector, volume control, and soon) □ Potentiometer □ Rotary switch

AKM_2011_Sensors_PG_GMW

A Hall Element is a magneto-electric transducer which utilizes the Hall Effect to measure or sense a magnetic field perpendicular to the Element. AKM Hall Elements typically have 4 pins, 2 input pins and 2 output pins, and can be driven by either a voltage or a current source. The output is a Hall voltage that is proportional to the magnetic field. The output from a Hall Element is analog and typically requires additional amplification. AKM uses four different semiconductor materials in its Hall Elements. These different materials represent AKM’s 4 different series of part numbers. The different materials provide different performance characteristics (magnetic sensitivity represented by electron mobility and band gap, operating voltage, temperature sensitivity, etc.) allowing the design engineer to choose the best solution for the particular application.

AK8779A

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise

ACCT-C-XXm

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2212-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2172-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2153-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5503_Users_Manual

USER’S MANUAL MODEL: 5503 Electromagnet USER’S MANUAL MODEL: 5503 Electromagnet

5453 User Manual

5453 User Manual USER’S MANUAL MODEL: 5453 SHIELDED HELMHOLTZ COIL

3480OG_Brochure

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3473-70-Fringe-Field

Model 3473 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

3472_Dom_Min_Fac_Req_11Jan05

Model 3472 System Installation; Minimum Facility Requirements for High Precision Systems and Systems with Field Reversal installed in North America

Quick and Easy Adaptation of Molecular Biology Technology to Tissue Embedment Polymerization

Using the SPI Cure™ with a standard heating block for 1.5 snap-cap conical tubes, at temperatures from 55–59°C, we have achieved safe and complete polymerization of LR White (acrylic) and SPI Pon (epoxy) resins in both protected and unprotected BEEM® capsules as well as 00-gelatin capsules. Please note that this report concerns a novel3 adaptation of dry-block heating technology designed for molecular biological procedures.In this test, we have purposefully used only resin blanks.Finally, we report that in the case of LR White, no degradation of the material of which the BEEM® capsules are constructed has been observed in either ‘protected’ or ‘unprotected’ heating regimes. We recommend careful testing of embedding molds not specifically mentioned in this paper.

SPI Supplies Plasma Prep™ X

The Plasma Prep™ X utilizes an anisotropic, parallel plate design to eliminate “undercutting” samples during the etching process. The system incorporates solid-state technology, an integrated vacuum gauge, and dual gas inputs for precise gas blending.

SPI Plasma Prep III™

The Plasma Prep III is the latest member of our Plasma Prep family. The system incorporates solid-state technology, including an integrated vacuum gauge. As part of its low cost design, the system comes single gas inlet. The addition of the optional Process Control Module expands the system, and allows precise mixing of multiple gasses, as well as the ability to automatically shut the system down when the process is complete.

5001/5002-AB Silver Paint

The SPI #5001-AB and #5002-AB Silver Paint Product (the same product in two different size bottles) is a highly concentrated suspension (43% ±3% silver solids) of specially prepared and tightly controlled high purity silver powder combined with a highly effective organic suspending and binder system.

SPI Supplies ® Grids

SPI Supplies® stocks the most complete selection of the highest-quality grids available today.

FlipScribe

FlipScribe takes scribing to a new performance level, making clean, straight scribe lines on the back side to accurately cleave front side targets, bonded wafers and other substrates. This method eliminates contamination of sensitive front side devices during the scribing processes and is valuable for both crystalline and amorphous samples.

Apiezon AP100 Ultra High Vacuum Lubricating Grease

With a vapour pressure of lower than 10-10 Torr at 20°C, Apiezon AP100 is a lubricating grease designed for use with equipment present within ultra high vacuum systems.

美国ARS公司CS210AE-GMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

美国ARS公司CS204AI-FMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。