美国ARS 闭循环低温恒温器 X-2 XRD

TMI Introducing CCS sensors

A CCS sensor is predominately a carbon ceramic amalgam housed in a hermetically sealed ceramic coating. These resistors were originally developed as electronic components which would survive high radiation fluxes (they are able to withstand neutron radiation in excess of 1017N/cm2)

Model SI-435 Silicon Diode Temperature Sensors

Si-435 Silicon Diodes from Scientific Instruments offer the industry’s highest 4K accuracy in an interchangeable/uncalibrated diode temperature sensor. The CAP package is the smallest encapsulated diode mount on the market while the SMD package offers the utility of a compact surface mount. Individually calibrated options are available where millikelvin accuracy is required.

VIS-Datasheet-D30-850M

These high speed photodetector modules consist of a GaAs pin photodetector integrated with a 50 µm-core diameter multimode fiber for optical input. The responsivity is greater than 0.4 A/W at 850 nm. The modules are engineering samples and use an optional external DC bias

VIS-Datasheet-A56-230C_v1-1

The A56-230 is a high speed VCSEL driver IC designed for directly modulated VCSELs in fiber optic transmission systems. The VCSEL driver IC is designed to directly modulate common-cathode VCSEL. The IC has differential input (Vin+, Vin-) and single-ended output to the VCSEL anode. A ground for the VCSEL common cathode is also provided by the IC. It is operated with a single 3.3 V supply typically dissipating less than 200 mW of DC power when no load (VCSEL) is connected at the output. The driver is also equipped with various analog control pins (Vxing, Vmod, Vbias). The zero-crossing can be adjusted with the Vxing pin. The VCSEL modulation current is controlled by varying the bias current swing with the Vmod, and the VCSEL bias current is controlled by Vbias pin.

Product-Catalog-2021

VI Systems GmbH (VIS) is a developer and manufacturer of optoelectronic components for optical communication, consumer and automotive applications. In the field of optical communications VIS offers optical components, such as vertical cavity surface-emitting lasers (VCSELs) and PIN photodiodes capable of up to 224 Gbps per channel and beyond. VIS VCSEL driver and PIN amplifier integrated circuits operate up to 56 Gbps with NRZ modulation. The latest generation of VCSEL and PIN photodiodes allow 400 Gbps PAM-4 energy efficient data transmission over one fiber with four channel short wave division multiplexing (SWDM) at 850 / 880 / 910 and 940 nm wavelength.

Model SD-6-15 Storage Dewar Magnet System

Model SD-6-15 Storage Dewar Magnet System • 6 Tesla magnet with vertical access • Low-loss liquid helium storage dewar • 4K sample insert

Opti-MAxesTM Model OPMX-141-1

Opti-MAxesTM Model OPMX-141-1 Superconducting Magneto-Optical Vector Magnet System

tube-inspector Flyer English

The tube-inspector is an automated system for the fast and precise measurement of tubular targets. It was developed to analyze coated pipes and tubes (e. g. rotational targets) before and during the production process. The system provides information about the quality of the process and the lifetime of tubular targets. Parameters, such as the diameter, ellipticity and deflection can be determined.

tube-inspector Flyer German

Der tube-inspector ist ein automatisiertes System zur geometrischen Vermessung von Rohrtargets und Magnet Bars. Das System wurde für die Analyse beschichteter Rohre und Leitungen (bspw. rotierende Targets) vor und während des Produktionsprozesses entwickelt. Hierzu gehören Aussagen über die Qualität des Prozesses sowie die Lebensdauer der Targets.

magtrack Flyer German

Das magtrack System basiert auf dem magnetischen Marker Monitoring Verfahren und wurde entwickelt, um die Bewegungsabläufe in geschlossenen Systemen aufzuzeichnen, zu analysieren und gegebenenfalls zu optimieren. Mit dem magtrack ist es möglich, die absolute 3D-Position im Raum sowie die Rotation eines magnetisch markierten Partikels zu detektieren. Das magtrack System ist modular aufgebaut und kann somit an beliebige Anlagen und Systeme angepasst werden.

cmos-magview Flyer German

Der cmos-magview ist ein digitales magnetooptisches Auslesesystem zum schnellen und präzisen Visualisieren magnetischer Streufelder. Das Sensorsystem erlaubt eine Echtzeit-Magnetfeldanalyse und ist für die Qualitätsprüfung von Magneten geeignet. Visualisiert werden Streufelder von,beispielsweise, Magnetstreifenkarten, magnetischen Encodern, Dipol- und Multipolmagneten. Eine intuitive Anwendungssoftware übernimmt die Darstellung mithilfe von Falschfarben.

Time-DomainThermoreflectance

Time-domain thermoreflectance (TDTR) is one of the most powerful methods to measure the thermal properties, most importantly thermal conductivity, of a wide range of bulk and thin film materials and their interface. The principle is to take advantage of the change in the reflectance of the surface to derive the thermal properties when a material is heated up. The set-up includes a pump and probe pulsed-lasers. The pump laser is utilized to generate acoustic pulses. The acoustic pulses could be at a transmittance or reflectance state at an interface, depending upon the properties of the interface. The probe laser will detect the reflecting acoustic pulses through a photodetector.

QuantumOptics

In semi-classical and quantum-mechanical physics, light can be considered not only as electromagnetic waves but also as particles called photons. The interaction of the matter at the submicroscopic level and the incoming light is in the fields of quantum optics. The main goal of quantum optics is to understand the quantum information and learn how to manipulate and realize the technologies. The popular studies of it include quantum correlation, quantum entanglement, and quantum information processing, which have a huge potential application of quantum computing.

Deep-LevelTransientSpectroscopy(DLTS)深能级瞬态谱

深能级瞬态光谱（DLTS）是通过测量电容瞬态随温度变化来检测半导体深能级缺陷浓度和热发射速率的有力工具。它通常使用肖特基二极管或p-n 结作为探针。在此过程中，探针正向偏压，以脉冲电压填充自由载流子缺陷。脉冲后，由于热发射，缺陷开始发射捕获载流子。

Angle-ResolvedPhotoemissionSpectroscopy(ARPES)

Angle-Resolved Photoemission Spectroscopy (ARPES) is one type of photoemission spectroscopies to obtain information about the electronic band structure and Fermi surface of crystals in the reciprocal space. Soft X-ray is irradiated onto the crystal surface, and the kinetic energy of photoelectrons emitted from the surface is measured as a function of polar and azimuthal angles. Because electrons escape from the surface are projected through the surface, the direction of the momentum perpendicular to the surface is not conserved. Therefore, ARPES is an ideal tool for 2D materials because the direction of the electronic momentum of interest is parallel to the surface. The increased sensitivity of excitations can be achieved by reducing thermal energy at cryogenic temperatures.

Parahydrogen仲氢

仲氢是氢(H2)的两种磁性形式之一。它通常用于提高核磁共振和核磁共振测量的灵敏度。 氢分子由两个原子组成。每个原子都有一个旋转的原子核。根据核自旋的方向，氢原子有两种类型。 如果两个氢原子原子核的自旋是平行的，那它就是正氢。如果自旋是反平行的，它就是仲氢。一般来说，氢气是正氢和仲氢的平衡混合物。这两种磁态之间有微小的能量差。

X-rayDiffraction

X-ray Diffraction (XRD) is a technique to determine the atomic and molecular structure of a crystal based on Bragg diffraction. X-rays are commonly used to produce the diffraction pattern because their wavelength is typically the same order of magnitude (1–100 angstroms) as the spacing d between planes in the crystal. The information on the intensity and angle of the diffractive X-rays can produce a 3D picture of the density of electrons within the crystal, which leads to the mean positions of atoms as well as chemical bonds, disorders, and other information. If it’s a single crystal sample, it’s usually mounted on a goniometer, which can position the sample at selected orientations. The benefits of the low-temperature XRD are to reduce the radiation damage and thermal motion. Low-temperature XRD also helps characterize superconductor materials.

X-rayDiffractionX射线衍射

x 射线衍射(XRD)是一种基于布拉格衍射来测定晶体原子和分子结构的技术。x 射线通常被用来产生衍射图样，因为它们的波长通常与晶体中平面间距d 的数量级相同(1100 埃)。 衍射x 射线的强度和角度可以产生晶体内电子密度的三维图像，从而得到原子的平均位置以及化学键、紊乱和其他信息。 如果是单晶样品，通常安装在测角仪上，测角仪可以将样品定位在选定的方向上。低温XRD 的优点是降低了辐射损伤和热运动。 低温XRD 也有助于表征超导体材料。

Viewport Glass Components

Low Profile — Low profile high transmission glass viewports available with 0.56 to 2.69 view diameters. Wide Range — Sapphire, fused silica, Accu-Sol™ and 7056 borosilicate glass substrate types offer a wide range of transmission options. Demountable Substrate — Unique “demountable” viewport design available to allow end users the option of having the viewport coated. This demountable design also allows for ease of cleaning and/or replacement.

Instrumentation Feedthroughs

Electrical Instrumentation Feedthroughs — Hermetic glass-to-metal seal feedthroughs are designed to meet Accu-Glass Products standard Subminiature-C™, Mil-DTL-26482 Circular and industry standard Subminiature-D configurations. In-Vacuum Cable Assemblies — UHV and high temperature cable assemblies using compatible materials such as PEEK, Kapton® insulated wire, stainless steel and DAP are just some of the vacuum compatible materials used to provide complete in-vacuum wiring. Air-service Cable Assemblies — Industry standard cables and connectors are utilized to provide the end user with complete connectivity solutions from bench equipment to the feedthrough flange.

Fiber Optic Feedthroughs

Fiber Optic Feedthroughs — UHV rated feedthroughs available in six core sizes from 62.5μm to 1000μm. UHV Fiber Patch Cable Assemblies — Polyimide buffered fiber patch cables available in six core sizes from 62.5μm to 1000μm. Air-service Patch Cable Assemblies — Polyimide buffered fiber with PVC jacketing available in six core sizes from 62.5μm to 1000μm. Accessories — Couplers, adapters, connectors, jacketing and wrap, polishing supplies and consumables. Multimode Fiber has a large core diameter, and is commonly used in short-run cable distances such as vacuum applications. Custom fiber cable assemblies available on request. Standard flange sizes are 1.33 and 2.75 Inch CF, ISO NW16 and 40 KF. Custom flange sizes available on request.

X-19-NO非光学低温恒温器

X-19-NO是顶端装载样品的非光学型恒温器，样品置于氦气交换气体腔，使用样品杆更换样品，换样时无需关闭制冷机，这样的设计换样速度快，特别适合需要进行大量样品测试情况。而且样品置于冷的氦气环境中，适用于各种导热性不好的样品降温。

X-2XRD闭循环低温恒温器

X-2专用于X光衍射实验。这些系统具有铍圆顶(DMX-2D),铍窗或Kapton窗。 DE-202冷头质量轻便,配以定制的仪表群使得该恒温器广泛应用于测角仪及衍射仪。该系统通常与Huber 和Newport 测角仪及Bruker 衍射仪配合使用。 Huber 512.12恒温器支架可与 CS202*G-DMX-2D恒温器无缝集成。

X-1AL标准光学型闭循环低温恒温器

X-1AL系列标准光学型闭循环低温恒温器因其测试灵活，价格经济而成为绝大多数实验室样品及装置测试的最优选择，该系统广泛应用于各种光、电、磁测试。 X-1AL系列恒温器可配备DE-202或DE-204系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

ds.LTR

Standard Features: • Glassware to fit into the Bruker cavity. Varian and JEOL are also available. • Bruker cavity adapter • Mounting arrangement for the Bruker magnet. • Sample space is in the sample rec eiver. • Transfer Line has Braided Stainless Steel casing over bellows for durability. • Flowmeter Panel for Helium flow control and optimization. Flow settings can be repeated precisely for standard experiments with multiple operators. • Dewar Adapter with pressure relief valves to ensure safety of system during pressurization of the dewar and to protect the transfer line from stresses.

ds.samplehldrs

Optical (Transmission). 0.75 in. clear view. Flat Plate:Backscattering

CryogenicFacts

Temperature measured with heat load applied @ cryocooler 2nd stage cold tip with no cold tip attachments, with cold tip vertically down, @ 60Hz power, @ room ambient (19-25C), with full radiant heat shield attached to 1st stage, with no additional applied 1st stage heat load, high vacuum insulation (starting vacuum <10mtorr with < 5mtorr/min rate-of-rise), 10’ flexhoses (3/4” dia for 204S and 210S). 50 Hz reduces capacity and increases cooldown times 15-25%. Data is typical but not guaranteed.

AutomatedSystemFlier

? Complete Turn-Key Operation ? Easy to Use ? State-of–the-Art Remote Control ? Real-Time Dynamic System Status ? Materials Property Testing: Optical, Electrical, Magnetic

ARSJTCooler(ORCA)

The ARS MR JT coolers use a patented unique cooling cycle to cool down and maintain temperatures to -193C (80K) without the use of liquid cryogens. The system consists of three physical components • Cold Head – where refrigeration occurs • Compressor – provides refrigerant flow & pressure • Gas Lines – room temperature, self sealing

ds.cs202-x2c

Closed Cycle Cryostat Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

ds.cs202-x2

Closed Cycle Cryostat Full featured cryostat for x-ray diffraction. Fits on Diffractometers listed below. Welded skirt with "G" configuration which turns all the hose and feedthroughs 90º for safe rotation during the experiment.

DS-CS204AF-DMX-20-OM

The DE204*F-DMX-20-OM is our Ultra Low Vibration Closed Cycle Cryostat for Optical Micrscopy applications such as MicroRaman and Micro Photoluminescence. The DE204*F-DMX-20-OM uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE204 Cryocooler. This pre-vents almost all vibration from being transmitted to the sample. Sample vibrations of 3-5 nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 4-5K and the cooling capacity is roughly cut in half at varying temperatures.

DS-CS202AF-DMX-20

The CS202*F-DMX-20 opens up a wide range of possibilities never before possible with a closed cycle cryocooler. The DE202*F-DMX-20 uses a Helium Exchange Gas to decouple the sample from the cold tip of the DE202 Cryocooler. This prevents almost all vibration from being transmitted to the sample. Sample vibration levels of 3-5nm have been demonstrated by users. Due to the exchange gas being less conductive, the base temperature will increase by 1-2K and the cooling Capacity is roughly cut in half at varying temperatures.

DS-CS202AI-DMX-1SS

The CS202*I-DMX-1SS is a high performance closed cycle cryostat for Optical, Electrical, and Magnetic sample testing. It has an all stainless steel vacuum shroud along with a welded stainless steel instrumentation skirt. The system is capable of vacuum levels of 10-7 Torr with an appropriate vacuum pump.

DS-LT3M

The ARS manufactured LT3M Helitran is a True UHV cold head (10-11 Torr) where all of the rub-ber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats, the LT3M is an advanced liquid helium flow cryostat utilizing many unique features, such as the matrix heat exchanged and the coaxial shield flow transfer line to achieve unparalleled efficiency and ultra low vibration levels. The combination of True UHV and angstrom level vibrations makes the LT3M ideal for low temperature application. The extended length and addition of a rigid support tube allow for cleaving and manipulation.

DS-PS-NS-10-4

Ultra‐Low Vibrations (< 50 nm) Microwave properties DC, RF properties MEMS Nanscale electronics Superconductivity Electrical and optical properties of nano‐devices Quantum dots and nanowires Single electron, and low current physics

NEWT-Litz-Book

Litz wire consists of a number of individually insulated magnet wires twisted or braided into a uniform pattern with the primary benefit of reducing AC losses in high frequency windings. New England Wire Technologies offers unlimited Litz wire constructions with multiple types of insulation to meet agency and/or specific customer voltage withstand requirements.

NEWT Overview

As a leading producer of high-quality braided products, New England Wire Technologies designs and manufactures flat-wire braiding, braid-reinforced tubing, scope braids and insulated braids. Our products are used for applications such as ground strap, motor brush leads, circuit breaker shunts, flexible bus bar, RFI/EMI shielding and shielding for mechanical protection of single or multi-conductor cables. We also create flexible cables and strands for use as flexible conductors in custom single and multiconductor insulated cables.

美国GMW-hw-101a_gmw

HW-101A Shipped in packet-tape reel(3,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue

美国GMW-hg-0812_e

•Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-HG-0715

HG-0715 HG-0715は、超小型SON形状GaAsホール素子です。 標準はテーピングリール供給です。（10,000pcs.／Reel） 注意： 弊社製品のご検討にあたっては本カタログの表紙裏の「重要注意事項」を 良くお読みください。

美国GMW-hg-176a_e

•Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks,adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required.

美国GMW-hg-106c_gmw

These products and their specifications are subject to change without notice.When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei EMD Corporation (AKEMD) or authorized distributors as to current status of the products.

美国GMW-AN_180KIT-AKM-HG-106C-2U

The AN_180KIT takes advantage of the very special lead frame and size of the AKM HG-106C-2U, GaAs, Hall element to detail the method of making a very thin (<0.65mm) thick, high field (+/-1T) magnetic field sensor.The kit incorporates a thin 0.4mm thick PCB and includes all the circuitry to interface with the Hall element. For the most temperature stable output, the HG series Halls should be driven with a constant current source. This kit has a current source of 0.5mA and an instrument amplifier to increase the Hall element output signal to a full scale analog voltage of 2.5V +/- 1.5V for a magnetic field up to +/-1.5T. The output is linear to a magnetic field of +/-1T.

美国GMW-AN_161

The AN_161KIT series of kits are PCB assemblies which provide an easy means to evaluate the Asahi Hall elements for magnetic field, electric current or position sensing applications. These kits can be used independently by themselves or with the GMW AN_160KIT, Universal Hall Interface Module (UHIM). There are two basic connection schemes depending on the kit part number as shown below. See the AN_160KIT specification sheet for details on the use of these kits with the UHIM.

美国GMW-AKM_2011_Sensors_PG_GMW

A Hall Element is a magneto-electric transducer which utilizes the Hall Effect to measure or sense a magnetic field perpendicular to the Element. AKM Hall Elements typically have 4 pins, 2 input pins and 2 output pins, and can be driven by either a voltage or a current source. The output is a Hall voltage that is proportional to the magnetic field. The output from a Hall Element is analog and typically requires additional amplification. AKM uses four different semiconductor materials in its Hall Elements. These different materials represent AKM’s 4 different series of part numbers. The different materials provide different performance characteristics (magnetic sensitivity represented by electron mobility and band gap, operating voltage, temperature sensitivity, etc.) allowing the design engineer to choose the best solution for the particular application.

Zero-Gauss-chamber-ZG7

To obtain a null field reference a Zero Gauss chamber must be used to shield the probe sensing area from external field. The ZG7 is particularly designed accessory for the SENIS Magnetic Mapping Systems.

WEB_CHEMIN

Principal uses of this compact magnet are a consequence of its main technical properties : - High field homogeneity, associated with a large gap, compared to its small external dimensions. • Simple way for testing NMR magnetometers without need of a big magnet. • Stable field generation for calibration of Hall magnetometers ; primary calibration by NMR. • Magnet, needing no power supply, for laboratory physics experiments.

VWM-S-1W-assembly

Requirements and tools 1. All new sensors are delivered with a wire pre-installed. Its tension is arbitrary. Its purpose is to allow immediate functional check of the sensor. 2. To install new wire, its length should be approximately 60mm longer than the sensor. Wire must be clean without visible damage or bending. 3. Necessary tools: - Screwdrivers with hexagonal ball heads 1.5mm, 2mm and 2.5mm - Tweezers - 2-3 surgical-style clamps - Scales with range ≥0.5kg - Set of weights to hook to surgical clamp - Magnifying glass - DVM 4. All sensors are thoroughly cleaned for UHV before shipment. A Residual Gas Analysis is attached. If sensors are to be used in UHV, it may be necessary to clean them again after manipulation. Laboratory-standard UHV cleaning techniques can be applied

VWM-S-1W-A40mm-FrontView

VWM-S-1W-A40mm-FrontView VWM-S-1W-A40mm-FrontView VWM-S-1W-A40mm-FrontView

VWM-S-1W-A20mm-MainView

VWM-S-1W-A20mm-MainView VWM-S-1W-A20mm-MainView VWM-S-1W-A20mm-MainView

VWM-Demo-readout-program

Vibrating Wire Monitor Demo readout program GUI User's Guide

VAC-DS-4644-X054

700 A - Stromsensor Modul / Current Sensor Module (Molex Connector)

VAC-BR-High_Current_Sensors

VAC is the technology leader in DC and AC current sensing, providing a wide range of products to the industry. VAC owns state of the art R&D facilities and worldwide manufacturing sites, offering outstanding product quality at low cost. The VAC-invented measuring principle of the closed – loop sensor with magnetic probe as a zero field detector is distinguished by maximum precision of the current detection.

VAC-4640-X152

1000 A Current Sensor for ±24V- Supply Voltage for electric current measurement: DC, AC, pulsed, mixed ..., with a galvanic isolation between primary circuit (high power) and secondary circuit (electronic circuit)

TNG3DTM005a

The Group3 Teslameter (serial versions) may be connected to a host computer using fiber optic cables. This has the advantage of electrically isolating the DTM and is particularly advantageous when using the DTM in electrically noisy or high voltage environments.

Thermo_Fisher_Chiller_1490G-CIRC_Manual

Thermo Scientific ThermoFlexTM Recirculating Chillers (Deluxe Controller)

stulle_inpac2018

The CWCT is a novel instrument developed for the accurate determination of the CW beam average current. It measures average beam currents down to the microampere level with noise contributions below 1 μA. Its output signal follows beam current fluctuations within ≤1 μs, permitting fast detection of beam loss. These characteristics render the CWCT an ideal instrument for proton and ion accelerators. We present the CWCT principle and laboratory measurements using various input signals.

Spectramag-6-OM2021

Operation Manual for Spectramag-6 Six-Channel Spectrum Analyser for Magnetic Field, Vibration and LF Acoustics SOFTWARE VERSION 6.203

SOR-DS-DLM699

The Sorensen DLM 600 series of programmable power supplies is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis.

SN-DS-i1a-magnetic-transducer

The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-h-for-i1a-mft

Hall Probe H for F1A Magnetic Transducers is a very thin (1.1mm) and long (42mm) single-chip integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-h-for-f1a-mft

Hall Probe H for F1A Magnetic Transducers is a very thin (1.1mm) and long (42mm) single-chip fully integrated 1-axis Hall-Probe. It measures magnetic fields perpendicular to the probe plane (By).

SN-DS-hall-probe-g-for-f3a-mft

Hall Probe G for F3A Magnetic Transducers with the naked Si chip is a very thin (0.5mm) and long (42mm) single-chip fully integrated 3-axis Hall-Probe.

Shape-B-SMA

CURRENT TRANSFORMER- SHAPE B/SMA CONNECTOR CURRENT TRANSFORMER- SHAPE B/SMA CONNECTOR

Shafer-BPM

The purpose of this paper is to review the topic of beam position monitoring as it applies to charged-particle beams in accelerators and beamlines.

Seva_BIW08

VIBRATING WIRE SENSORS FOR BEAM INSTRUMENTATION Suren Arutunian

Sentinel3Brochure

Sentinel 3 is the most advanced RF over fiber test and measurement system for: • EMP test and EMC conformance • HIRF aircraft clearance • Simulated lightning testing • Impulse / time domain / NEMP testing • Low and high level swept frequency coupling measurements

s-bpmdatasheet

Non-interceptive beam position measurement For linacs, microtrons and transfer lines Single bunch, macropulse and CW Beam charge range > 1000

RD101-EM3242

The RD101-EM3242 is a reference design for the AKM EM-3242 Non-Contact Angle Position Sensing IC. The EM-3242 senses the angle of magnetic field component in the top plane of the device package. The EM-3242 provides an analog output voltage of 10% to 90% of the supply voltage for a mechanical angle range of 360 degrees of rotation. The EM-3242 has two operating modes. One with the “In Range” detector enabled and one with the “In Range” detector disabled. The “In Range” detector includes internal circuitry which causes the output voltage to drop to 0V whenever the magnetic field level at the EM-3242 is greater than 60mT or less than 10mT.

RCTrms-INS

The RCTrms is a wide-bandwidth, flexible, clip-around current transducer for measuring ac currents.PEM’s Rogowski Current Waveform Transducers combine high bandwidth, safety, and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

RCT1A-INS

The RCT1A is a flexible, clip-around current transducer for measuring ac currents.The RCT1A is a direct replacement for metering class current transformers with a 0 to 1A output, combining safety and the minimum disruption to the circuit under test. These instructions should be followed whenever the unit is used. They are intended to help you obtain the best and safest performance from the transducer.

RCT1a

The RCT1A is a genuine Current Transformer (CT) replacement but hasall the intrinsic benefits of a thin, light-weight, flexible, clip-around Rogowski(sense) coil. Just like a CT the RCT1A secondary output is an industrystandard 0 to 1A (5VA pf 1) instantaneous current proportional to themeasured primary current.

Principle-of-Zero-Flux-CTs

The primary current, ??, in a conductor through a magnetic core will generate a magnetic flux in the core ????.

PPM-DS-p2p-CasesHousings

The cases are available in four options for either desktop use and/or 19” rack mounting, and all variants can accommodate up to 10 Plug-In modules plus the point2point switch panel which supplies power to the modules. If the Test & Instrumentation System Controller is fitted, then the number of module slots is reduced to 8. The cases incorporate a backplane PCB and power supply. The point2point Plug-In modules simply plug into the case, allowing the user to quickly and easily upgrade his system with additional modules at any time.

PPM-DS-p2p-ACLink

The AC point2point link is capable of transmitting analogue signals of up to 3GHz over singlemode fibre. The capability to transmit any type of low level RF signal within this pass band makes it ideal for EMC measurements, HPM experiments or distributed timing. The modules are available in a fully EM shielded casings, or as a plug-in module for use with the various point2point housings.

PPM-Chart-square_18V_1M_250

Step response to a 1MHz square wave on the point2point 40MHz link.

PPM-Chart-signal_latency_2m

Trace from a function generator and the output of a point2point link (with small offset in the time domain).

PPM-73461-HB-2-NiMH-battery-Handbook

Nickel Metal Hydride Battery Pack773461-HB-2 User Handbook

PEM-TN-CWT-DelayAndRiseTime

The CWT behaviour at frequencies approaching and exceeding its specified (-3dB) bandwidth is very complicated. It is related to the distributed inductance and capacitance of both the Rogowski coil and the connecting co-axial cable (which have different characteristic impedances) and their terminations, and to the gain-frequency characteristic for the op-amps and associated parasitic impedances used to implement the integrator and buffer electronics. It also varies depending on the position of the current within the loop, although up to the (-3dB) bandwidth this variation is very small.

PEM-CWTUM-Phase-error

CWTUM Gain and Phaze Error CWTUM Gain and Phaze Error

PA1-Power-Amplifier-OM3225

Operation Manual for PA1 Power Amplifier Operation Manual for PA1 Power Amplifier

Output-signal-cable-COxx-G

Output Signals Cable COxx-G Output Signals Cable COxx-G

OM1938-Magnetic-Shield

Operation Manual for TLMS-O100 Open-End Magnetic Shield TLMS-C100 Capped-End Magnetic Shield

NPCT-175

NPCT-175 NPCT-175 NPCT-175 NPCT-175 NPCT-175 NPCT-175

NPCT-75-H

NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H NPCT-75-H

MX-BPM-Datasheet

Optimized for electron/positron Storage Rings 1μm X and Y resolution Handles >75dB beam intensity range Each button sampled up to 10 000 times per second

MX-BPM.manual.Spear3

MX-BPM User’s Manual Spear-3 options MX-BPM User’s Manual Spear-3 options

MS2H-DR2150

MS2H PROBE OUTLINE MS2H PROBE OUTLINE MS2H PROBE OUTLINE

MS2C-DR0642

MS2C-DR0642 MS2C-DR0642 MS2C-DR0642 MS2C-DR0642 MS2C-DR0642

MS2_MS3-DS0020

MS2/MS3 Magnetic Susceptibility System MS2/MS3 Magnetic Susceptibility System

Model_3474_System_Installation-NA

Model 3474 System Installation; Minimum Facility Requirements for Systems with Field Reversal, High Precision Systems and High Power Systems installed in North America

MMS-1A-RS-Operating-Manual_US

Magnetic Field Mapper MMS-1A-RS is the high-end version of the SENIS Magnetic Field Mapping Systems. It allows users to perform a fast, high resolution mapping of magnetic flux density around permanent magnets, electromagnets or electronic circuit boards. The map of the magnetic field can be presented as color coded 2D or 3D visual displays on a PC screen and as a table of numerical measured values. Measured data are analyzed in real-time, which provide data analysis capabilities for an advanced inspection, characterization and quality control of permanent magnets.

Miniature-Probes-DS3939

Mag612 & Mag619 Miniature Three-Axis Fluxgate Probes

metrolab_fieldmap_PM-1005-0275

Typical Field Map for Metrolab Model PM-1005-0275 Permanent Magnet

Matesy-MO-PRES-SensorsOverview

Overview about different types of MO-sensor curves

Matesy-MAN-CMOS-MagView

The CMOS-MagView is an innovative device for the optical visualization of magnetic fields. The highly engineered magneto-optial sensor technology visualize the magentic stray field of magnetic materials directly and at high optical resolution. The magneto-optical analysis of the test specimen provides concrete information about the field polarity, field homogeneity, distribution of the magnetic material and the magnetization properties.

Matesy-DS-MiniMo

Being a small and light testing device, Minimo can be used as a stationary and mobile system for fast visualization of magnetic stray fields. The webcam-based Minimo is applicable for a qualitative examination of magnetic stripe cards, removed serial numbers and hard magnetic material structures. In addition to plug-and-play ability and image archiving a simple change of the magneto-optical sensor head is possible. Minimo can be equipped with all types of magneto-optical sensors. This allows an adaption of the Minimo to the sample field strength.

Matesy-DS-CMOS

The cmos-magview is a digital magneto-optical system for the fast and accurate visualization of magnetic stray field structures. The sensor system allows real-time stray field analyses and quality testing of magnetic materials. Magnetic stray fields of, for instance, magnetic stripe cards, magnetic encoders and di- and multi-pole magnets can be visualized. A comprehensive user Software illustrates the images in false color

Mapper-Flyer-inside

A wide range of power supply units are available for our range of single and three-axis magnetic field sensors. All units accept analogue inputs from our sensors and output the signal to an analogue-to-digital converter or other separate device.

MagneLab-DS-CT

The Magnelab Current Transformer (CT) provides an accurate, nondestructive (noncontact), measurement of single or repetitive unipolar or bipolar pulses, or continuous wave.

Mag690-DS2604

Mag690 Low Cost Three-Axis Magnetic Field Sensor This compact, versatile, fluxgate sensor is ideal for integration into large component systems where high performance is essential. It is also suitable for use in projects requiring large numbers of sensors where unit cost is critical.

ew-500_gmw

EW-500 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package.

ew-403_gmw

EW-403 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package

eq-433l_e

EQ-433L is composed of an InAs Quantum Well Hall Element and a signal processing IC chip in a package Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue.

em3242-reel

EM-3242-T５【Product Specification】 EM-3242-T５【Product Specification】

DTM-151-S_Manual_-S5

DTM-151 DIGITAL TESLAMETER with serial communications USER’S MANUAL

DTM-130-141

Fully configurable dedicated 6-channel system interface unit for ultra-stable, high pre-cision fluxgate technology DS series current transducers.Powers up to 6 x DS50 to DS2000 at the same time.Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V)

DS-HTS-110-AG-HF

APPLICATIONS HTS-110’s HF range is suitable for a variety of applications, including: • MOKE (Magneto-Optic Kerr Effect) • Variable Temperature Optical Cryostat • Quantum Hall Resistance Standard • Fourier Transform Mass Spectrometry

DS5000UBFS-10V7500A

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 8000A

DS1000UB-10V

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1100A

DS200ID-CD100

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 370A

DR5000IM

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 8000A

DR1255

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DR0657

DQ640ID-B is a current transducer targeting stable power supplies and other areas, where it is important to have the programming flexibility

DL2000ID

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A

Datasheet_DR10000IM

Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 11000A

CZ-3704

CZ-3704 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CZ-3701

CZ-3701 is an open-type current sensor using Hall sensors, which outputs the analog voltage proportional to the AC/DC current. Group III-V semiconductor thin film is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless ultra-small surface mount package realizes the space-saving.

CWTUM_accuracy

Positional accuracy and external currents Due to small variations in the winding density and coil cross sectional area the transducer output varies slightly depending on the position of the current in the coil and also the size of the current conductor relative to the coil.

cwt_mini

Instructions for CWT Integrator Module Fuse Replacement

CWT_Fuse_Replace_Instructions_GMW

Instructions for CWT Integrator Module Fuse Replacement

CWCT-BCM-CW-E

CW Current Transformer Beam Current Monitor for CW beams and macropulses

CT-TECH-NOTE

The purpose of this technical note is to expose the effect of a DC primary current on the current transformer measurement. Primary DC current can either be the primary current DC component or a DC bias current applied to the CT primary to increase its I.t product.

CT-TECH-NOTE

The current transformer's (CT) intrinsic noise source is the Barkhausen noise of the magnetic core. It is several orders of magnitude below other noise sources affecting current measurements with a CT: 1. Noise of the amplifier or instrument measuring the CT signal 2. Noise coupled to the CT case 3. Noise picked up by the cable connecting the CT to an oscilloscope or amplifier

CT-04.12.Tech_.note

The CT output coaxial cable should preferably be terminated in 50 ohms. CT characteristics are guaranteed only when CT is terminated in 50 ohms. The termination should present sufficient power dissipation capability. When CT output is terminated in 50 ohms, its sensitivity is half that when terminated in a high-impedance load.

CSA-1V-spectrum-noise

Features: • Sensitive to a magnetic field parallel to the chip surface • Very high sensitivity • Linear output voltage proportional to a magnetic field • Wide-band: DC to 100kHz • Very low offset and offset-drift • Very low noise • Isolated from current conductor • Surface mount SOIC-8 package

CQ-3303

CQ-3303 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3202

CQ-3302 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ-3301

CQ-3301 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ-3300

CQ-3300 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra- thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Coreless surface mount package realizes the spacesaving.

CQ3202

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor,magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ3201

CQ-2366 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2332

CQ-2332 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ-2332

CQ-2332 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

CQ2092

CQ-2092 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor, which enables the high-accuracy and high-speed current sensing. Simple AI-Shell® package with the Hall sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.

BSS-02B section through coil & nose cone

BSS-02B section through coil & nose cone BSS-02B section through coil & nose cone

BSS-02B-OM1741

Operation Manual for BSS-02B Magnetic Susceptibility Sonde

BI-MAN-DegaussingWand-OM2914

Bartington Instruments, single or three-axis fluxgate magnetic field sensor.

BI-AN-Connecting-your-own-Power-Supply-to-a-Bartington-Magnetic-Field-Sensor-AN0042

Bartington Instruments, single or three-axis fluxgate magnetic field sensor.

BBMXX-KIT-I-Specification

The Ametes BBMXX-KIT Bus Bar Module Current Sensor Engineering Evaluation kit provides a tool to evaluate the BBM-01 current sensing module. There are five kits available that cover a range of currents from 200A to 3000A. The kit locates two magnetic field sensors on each side of an electric current bus bar. Two Sentron CSA-1VG precision Hall Effect IC’s sense the magnetic field as a function of current on both sides of the bus bar.

BATT-CONN-4PIN-Outline

Bartington Instruments manufactures a range of Fluxgate magnetometers and acquisition units, magnetic susceptibility systems, and a range of test equipment. Some of these products are subject to export control. The summary below is provided to give an overview of the rules that apply.

Bartsoft-PC-OM2647

Bartsoft software acquires, corrects, displays, stores and prints data using Bartington Instruments MS2 and MS3 meters. This guide explains how to use the software and helps the user understand how it works, including the function of all controls and windows.

axial-mag-probes-B-and-D

Axial Mag Probes type B (0.2mT) and type D (2.0mT)

AN0036-Fluxgate-magnetometers-used-for-on-board-closed-loop-degaussing

To provide real time data for mitigation of magnetic signatures of ships and submarines.

AN0028-Mag-01H-DI-used-in-Absolute-Declination-and-Inclination-Measurements

To calculate absolute values of declination and inclination in the Earth’s magnetic field at a specific location, for accuracy of magnetic measurements.

AN0025-Mag-03-used-to-measure-solar-weather-from-the-ground

To protect communications, power and other technological systems from unusual solar activity by monitoring solar weather from ground stations.

AN0009-Magnetic-suceptibility-in-archaeological-prospecting

Sensitive magnetometers have been used for many years for locating and planning archaeological sites. Originally developed in the 1950s for detecting pottery kilns by the thermoremanent magnetism of their baked clay construction, magnetometers were immediately found to respond also to ancient pits and ditches backfilled with topsoil.

AKM-Current-Sensor-Parameter-Selection-Chart

AKM Currentier Series of Current Sensing IC's Test Printed Circuit Boards

AK8788-04APR2012

Features ?High sensitive omnipoler operation ?Micropower operation 　Typ.4.5μA (average : VDD=1.85V) ?Ultra small SON package : 1.1×1.4×t0.37mm 　Halogen free

Adaptors

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-manual

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-E-RM-3R-dimensions

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

ACCT-datasheet

Precise waveform measurement of long pulses and macropulses up to several milliseconds with minimal droop and noise.

9311300016A-D-SUB-Cable-for-DSSIU

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

18900480_A_1060-62_Probe_Sample_Location_Range

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11901230_F

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

11900211_A

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2236-0-Outline

The 17900-2212-1-Xm Cable Adapters provide a means of connecting the CPC-XXXX-27 current probes to a USB port for power and to monitoring instruments with a BNC connector input. The cable comes in various lengths listed below. The adapter's USB module incorporates a power ON LED and a low pass filter to condition the USB 5V power and remove any high frequency switching PS noise from the USB port. The module also incorporates an isolation amplifier to isolate the CPC-XXXX-27-BP2 output signal and signal common from the USB Power and Power common. This adapter removes potential additional offset voltages that may be introduced with long cable runs between the probe and monitoring equipment as described below. Compatible with the CPC-XXXX-27-BP2 probes and 17900-2209-0 Extension Cable.

17900-2210-0-Outline-Dwg

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

17900-2171-0

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

5503_Users_Manual

USER’S MANUAL MODEL: 5503 Electromagnet USER’S MANUAL MODEL: 5503 Electromagnet

5453_Spec

To avoid saturation, beam current transformers must be shielded from solenoid, quad and RFQ high stray fields. Good understanding of field distribution, shielding materials and techniques is required. Space availability imposes compact shields along the beam pipe.

5204_Brochure

The 5204 electromagnet is a projected vector field magnet providing field of any orientation at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible. A clear path exists all the way through with Ø2.5mm, this allows optical access from the beneath.

5203_Specification

The 5203 electromagnet is a projected field magnet providing uniform field at a location above the magnet surface. It is intended for applications where the space around the working volume needs to be freely accessible.

5203_C_Proj_Vert_Field_Magnet

USER’S MANUAL MODEL: 5203 PROJECTED VERTICAL FIELD ELECTROMAGNET

3480 Uniformity PoleGap PoleFace 35A

The 3480 OG dipole electromagnet is a light weight versatile system intended to provide an open geometry particularly suited to MOKE applications. At 32 kg this magnet can easily be moved between applications and can be operated in any orientation.

3480_17907-0728-0_C_Tapered_Sleeve

The 3480 dipole electromagnet is a light weight versatile system that can provide fields approaching 4 Tesla. At 34 kg this magnet can easily be moved between applications and can be operated in any orientation.

002629

Electromagnets are used extensively in MR systems—hyperpolarized gas, prepolarized, and other low field imaging systems often use electromagnets for the main field, and conventional superconducting systems commonly use electromagnets for the shim and gradient coils. The field produced by an electromagnet is only as temporally stable as the current supply that powers it. The steady state accuracy of a current supply is fundamentally limited by noise and long-term drift of the control electronics, and the accuracy of a current supply subject to transient demands of a system, such as our Prepolarized MRI system, is fundamentally limited by the dynamic response of the coil itself.

2005-MMM-5201-5403AC-Presentation

Application examples: • In-plane magnetic field effects in magnetic thin film, media and devices. FeRAM, MRAM,MOKE, SMOKE • Scanning Probe Microscopy, SEMPA, STM, ATF. • Calibration and test of Hall effect, MR, GMR sensors • Chemical reaction and biological sample activity study

55B0082-B

The 3MTS is a handheld Teslameter / Gaussmeter with integrated USB interface. It was developed in cooperation between the two companies SENIS and Matesy.

SPI Supplies® Vacuum Greases

The Apiezon family of high vacuum greases are known the world over for their high quality, consistency and excellent compatibility for high vacuum applications. The Apiezon hydrocarbon greases are silicone and halogen free so there is never a risk of Si contaminating the microscope column. Most are made of pure hydrocarbon materials.

SPI Supplies® Tweezers

The largest offering of high quality scientific tweezers, used for the most demanding requirements in research laboratories world-wide...

5001/5002-AB Silver Paint

The SPI #5001-AB and #5002-AB Silver Paint Product (the same product in two different size bottles) is a highly concentrated suspension (43% ±3% silver solids) of specially prepared and tightly controlled high purity silver powder combined with a highly effective organic suspending and binder system.

Hookupz 2.0 Universal Smartphone Optics Adapter

Now you can digitally record and capture everything you see through your optical device and share instantly via text, email or social media. This adapter allows you to connect your smartphone to most any optic: microscopes, stereoscopes, inoculars, monocular, spotting scopes, telescopes, borescopes, slit lamps, night vision, and more!

Apiezon AP100 Grease MSDS

With a vapour pressure of lower than 10-10 Torr at 20°C, Apiezon AP100 is a lubricating grease designed for use with equipment present within ultra high vacuum systems.

美国ARS公司CS210AE-GMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

美国ARS公司CS204AI-FMX-1SS高效型闭循环无液氦低温恒温器

X-1SS高效型低温恒温器拥有不锈钢真空外罩及仪表群。配以合适的真空系统该套恒温器真空度可达10-7 Torr，更高的真空度会有效防止样品表面污染。 镍镀金无氧铜铜防热辐射屏耐用，热辐射低，是低温实验下理想的防热辐射材料。 X-1SS系列恒温器可配备DE-202、DE-204或DE-210系列冷头，根据客户需要可选择4K，5.5K，10K不同型号。

美国ARS公司CS202AI-DMX-1SS高效型闭循环无液氦低温恒温器

典型特点 l 无需消耗制冷剂 l 更高真空的不锈钢焊接结构 l 1.25 英寸的大光学窗口 l 大样品视角利于光学采集(F/.8) l 可任意方向操作 l 可根据客户要求进行定制 可选配置及升级选项 l 4 K 冷头 l 5.5 K 冷头 l 450 K高温台 l 800 K 高温台 l 可定制温度计结构 l 可定制接线结构 l 可定制窗口材料 l 可定制样品座