The I53 Injector contains a 250 ml source bottle with double containment and leak detection. A single, small diameter, PTFE tube transfers the solution to the Elite Etch system. An injector block installed between the pump and heat exchanger of the Elite Etch and injects the solution into the acid stream. All components are PTFE, PCTFE, or borosilicate glass.
On an existing Elite Etch system, the I53 Injector can be easily installed using a new cable connected from the I53 to the Elite Etch. The existing handheld is now directly plugged into the I53 and does not require any special software for the etcher. The only modification to the etcher is the installation of the injector block and the routing of the solution tubing through the bottle box and into the I53.
When solution injection is selected from the handheld a set up cycle is initiated. This cycle fills the syringe pump and all of the tubing to, and including, the injector block. This cycle purges any excess solution to the waste bottle and prepares for etching with corrosion inhibiting solutions.
The injection of the inhibitor is initiated by selecting the appropriate operation recipe. The programming screen has a selection of the ratio with a range of 20:1 to 40:1. The injection ratio programmed applies to both etching and rinse. The syringe contains approximately 5 ml and the syringe and syringe plunger are easily replicable.
Dimensions | Height: 230 mm (9 in) |
---|---|
Width: 230 mm (9 in) | |
Depth: 127 mm (5 in) | |
Weight | Approx. 16 kg (35 lb) |
Power Source | 90 to 250 VAC, 50 to 60 Hz (4 amp) |
Syringe Type | Hamilton gas tight 5 ml capacity |
Resolution | 0.1323 μl |
Cycle Volume | 0.0025 to 0.005 ml programmable |
Mix Ratio | 20:1 to 40:1 |
Dispense Accuracy | ±3%, ±0.14 μl |
Refill Cycle Time | 60 second maximum |
Source Bottle Size | 250 ml |
Compatibilities | Elite Etch 7000 |
Elite Etch Cu 7100 | |
Elite Etch Cu ESD 7200 | |
Mega Etch 7300 | |
Warranty | most comprehensive and inclusive warranty in industry (ask for full details) |
企业名称
似空科学仪器(上海)有限公司
企业信息已认证
企业类型
信用代码
91310115MA1H9W0N9G
成立日期
2018-04-16
注册资本
500
经营范围
从事仪器仪表科技、计算机软硬件科技、工业自动化科技、智能科技、电子科技领域内的技术开发、技术咨询、技术服务、技术转让,仪器仪表、实验室设备、电子产品 、一般劳防用品、机电设备及配件、塑料制品、五金交电、日用百货、化工原料及产品(除危险化学品、监控化学品、民用爆炸物品、易制毒化学品)的销售,从事货物及技术的进出口业务。【依法须经批准的项目,经相关部门批准后方可开展经营活动】
似空科学仪器(上海)有限公司
公司地址
张江微电子港7号楼7楼
客服电话