推荐厂家
暂无
暂无
[color=black]YC/T207-2006卷烟条与盒挥发性有机物的测定 顶空[url=https://insevent.instrument.com.cn/t/Mp]气相色谱[/url]法中[/color][color=black]顶空进样器和[url=https://insevent.instrument.com.cn/t/Mp]气相色谱[/url]都需要载气来推动分析物进入系统进行分析。[/color][color=black]原设计中载气从钢瓶中引出后通过三通将气路一分为二,一部分进入[url=https://insevent.instrument.com.cn/t/Mp]气相[/url][/color][color=black]EPC作为载气[/color][color=black],一部分通过顶空作为顶空的载气,经过传输线进入[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]进样口。[/color][color=black]当[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]设定一个分流比时(标准方法设为[/color][color=black]10[/color][color=black]:[/color][color=black]1[/color][color=black])进入进样口的载气一部分[/color][color=black]从分流口排出,因为进样口的来气分为[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]和顶空两部分,分流比要通过流量计测定排气口的气体流量然后调节顶空气体旋钮,来调节分流比。[/color][img=流量计,690,1226]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262017_01_1619176_3.jpg[/img]流量计[img=,690,1226]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262018_01_1619176_3.jpg[/img]用流量计测定分流比[img=,690,1226]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262021_01_1619176_3.jpg[/img]调节顶空旋钮,用来调整顶空的气体流速,进而控制顶空进入[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]的气体流速;[img=,690,477]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262024_01_1619176_3.png[/img]那么问题来了,如果流量计出现损坏或者流量调节控制钮出现人为误操作再次调节就比较麻烦,而且流量计精度远远达不到设备要求。因此大部分安捷伦工程师建议如果设备不做其他项目,将[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]和顶空的载气系统串联起来,由EPC控制。实现分流比的精确控制。首先先将[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]的EPC 两根进进样口的管断开,进样口端用死堵堵住,EPC 端用两通和顶空的后加管路连接起来,顶空现由管路拆除,连接不锈钢管与EPC 连接。注意连接口的变化。设计好方案之后就开始动工吧先准备好需要的管线和两通、死堵等[img=,690,388]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262030_01_1619176_3.jpg[/img]将进样口的两个连接管其中一个断开,两个是由区别的,注意不能断错[img=,690,1226]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262039_01_1619176_3.jpg[/img]将顶空的载气系统拆下来接两通[img=,690,388]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262044_01_1619176_3.jpg[/img]然后将顶空的管线和EPC接出来的管线用两通连起来[img=,690,388]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262045_01_1619176_3.jpg[/img]连接完毕,顶空的设置改成EPC控制[img=,656,557]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262100_01_1619176_3.png[/img][img=,656,557]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262101_01_1619176_3.jpg[/img][img=,660,428]http://ng1.17img.cn/bbsfiles/images/2017/09/201709262101_02_1619176_3.png[/img]至此整改的顶空载气系统用EPC 控制改造外科小手术就完成了。希望各位版友批评指正。谢谢!
我想请教大家一个问题,就是[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]不是开机时就通着载气吗,[url=https://insevent.instrument.com.cn/t/Mp]气相[/url]还连着顶空进样器,那么载气是通过顶空然后进的[url=https://insevent.instrument.com.cn/t/Mp]气相[/url],还是载气分了两路,一路进[url=https://insevent.instrument.com.cn/t/Mp]气相[/url],一路通过顶空然后进[url=https://insevent.instrument.com.cn/t/Mp]气相[/url],如果是分了两路,那么载气是在哪里分流的呢?我是新手,不是很明白,特此向大家请教
最近用GCMS+顶空做样时,用氮气做顶空载气,基线很高,低浓度出峰难,大家做样时,会把顶空的载气换成氦气吗?