2018/09/03 14:11
阅读:484
分享:方案摘要:
产品配置单:
Agilent 1290 Infinity II 制备型液相色谱
型号: 1290 Infinity II Preparative
产地: 德国
品牌: 安捷伦
面议
参考报价
联系电话
Agilent 1290 Infinity II Multisampler
型号: 1290 Infinity II Multisampler
产地: 德国
品牌: 安捷伦
面议
参考报价
联系电话
方案详情:
Abstract
The Agilent 1290 Infinity II Preparative Open-Bed Fraction Collector sets new benchmarks in efficient and flexible fraction collection. The fraction bed can be equipped individually with six containers holding fraction tubes in eight different sizes. Three drawers provide easy access to collected fractions even during a run. Peak- and time-based fraction modes have been extended to eight combined modes, enabling the collection of volume or time slices, and including two recovery collection modes. Trigger combinations of ultraviolet (UV) with mass-selective detection (MSD) signals now include an AND/OR logic that gives extra flexibility for challenging purifications. This Technical Overview provides a deeper insight and typical application examples of the fraction modes, including collection results.
Introduction
Fraction collection is the key feature that turns an analytical high-performance liquid chromatography (HPLC) system into a purification system. Simple as it may sound, fraction collection in general, and preparative-scale purification in particular, do have challenging facets. Flow rates in preparative-scale HPLC range from 5 up to 100 mL/min or above, generating fraction volumes of below 1 mL up to tens or even hundreds of mL. This demands collection vessels of different sizes, if the fraction collector capacity is to be used in an optimal way. Quick processing of collected fractions (re-analysis, pooling, and solvent evaporation) is desirable, creating the need for an easily accessible fraction bed.
The Agilent 1290 Infinity II Preparative Open-Bed Fraction Collector1 contains new and improved features that address all of these topics. Fraction containers holding tubes of different diameters (12, 16, 25, 30 mm) and lengths (100 or 150 mm) are optimized to hold fractions of 8 to 78 mL. The fraction bed can be equipped individually with six containers, and holds up to 432 single fractions, or a maximum fraction volume of 5,940 mL. Three drawers separate the fraction bed, and enable the exchange of full drawers even during operation. Only the currently active drawer is locked to prevent spills and sample loss.
Tubing kits with different inside diameters are available for optimized setup according to the flow rate used. As with the Agilent 1260 Infinity fraction collectors, the 1290 Infinity II Preparative Open-Bed Fraction Collector features a built-in delay sensor, enabling precise calibration of the delay between the detector and the fraction valve without any hardware modifications.
Along with hardware improvements, the 1290 Infinity II Preparative Open-Bed Fraction Collector offers several enhanced fraction collection modes that combine peak- with time-based collection, and include recovery collections. Fraction collection triggered by a combination of ultraviolet (UV) with mass-selective detection (MSD) signals has also been extended by a third mode, combining the advantages of logical AND/OR connections. This Technical Overview describes the different fraction collection modes available in the 1290 Infinity II Preparative Open-Bed Fraction Collector, and presents typical applications of the feature enhancements.
Conclusion
Besides a larger capacity, and a much more flexible configuration of the fraction bed, the Agilent 1290 Infinity II Preparative Open-Bed Fraction Collector offers new combined fraction modes that are tailored to the demands of different purification challenges. This Technical Overview provides application examples and collection outcomes of these fraction modes, including time-based collection combined with volume slices, peak-based collection combined with time slices, and two recovery collection modes. Peakbased fraction collection is demonstrated with a combination of ultraviolet (UV) and mass-selective detection (MSD) signals, connected by Boolean AND, as well as the novel AND/OR logic
下载本篇解决方案:
更多
Agilent Vaya 手持式拉曼光谱仪的 不透明容器分析能力
本研究通过对蓝桶内的一系列常见辅料和活性成分进行测量,展示了 Agilent Vaya 手持式拉曼光谱仪穿透不透明容器的分析能力。空间位移拉曼光谱 (SORS) 是安捷伦特 有的技术,是独特的 Vaya 容器扣除算法的基础。这项技术能够优化扣除光谱中的容器干扰,从而提供清晰的内容物特征。直接穿透塑料桶验证原辅料的能力,提供了在仓库中高效执行原辅料鉴定 (RMID) 的工作流程,且无需专业人员或受控的采样环境。
制药/生物制药
2024/08/20
使用 Agilent 8890 气相色谱和 TCD/FID 系统分析氢气中的氦气、 氩气、氮气和烃类杂质
在本应用简报中,我们采用 Agilent 8890 气相色谱 (GC) 系统,通过气体进样阀进样、毛细管柱分离和火焰离子化/热导检测器 (FID/TCD) 分析了氢气 (H2) 中的氦气(He)、氮气 (N2)、氩气 (Ar) 和烃类 (HC) 杂质,评价了系统重复性、灵敏度和线性。出色的测试结果表明,8890 气相色谱系统能够实现目标分析物的准确、高精度分析。此外,该系统还适用于根据 ISO 14687-2019 和 GB/T 37244-2018 等不同法规对燃料电池汽车用燃料氢气进行质量控制。
能源/新能源
2024/08/16
使用 Agilent InfinityLab 在线液相色谱 系统实现对流动化学反应器中反应过 程的实时监测
本应用简报介绍了 Agilent InfinityLab 在线液相色谱解决方案与流动化学反应器结合使用的能力。高度准确的直接进样和采样模式可实现不同反应参数对整体反应及其特性影响的测量。采样和分析由安捷伦在线液相色谱监测软件全面协调控制,该软件能够以安全、经济的方式实现实验监测的全自动化。
石油/化工
2024/08/12
使用配备氦气节省模块以进行载气 切换的 Agilent 8850 气相色谱系统 分析香草提取物的方法转换
在全球的香料公司中,分析和了解香精与香料物质的成分是质量控制 (QC) 和研发(R&D) 实验室工作的核心。本应用简报重点介绍了 Agilent 8850 单通道气相色谱仪的性能,它成功实施了用于详细分离研发实验室中所用香料的常用但耗时较长的气相色谱方法,以及适用于 QC 分析的快速方法。安捷伦方法转换软件为用户提供了在研发和 QC 等实验室之间转换色谱方法的简单工具。
食品/农产品
2024/07/29