拉达加速仪

062819美国戴安加速溶剂萃取仪系统微球状硅藻土Dionex™ ASE™ Prep DEDionex ASE Prep DE 分散剂是微球状硅藻土，作为分散剂和干燥剂使用，专为与 Thermo Scientific™ Dionex™ ASE™ 加速溶剂萃取仪系统而设计。 物料在样品被加入萃取池前与样品混合。 可以轻松与 Dionex ASE Prep MAP 以 1:1 的比例混合，以在加速溶剂萃取条件下实现最佳水分去除。062819-ASE Prep DE,样品分散剂和干燥剂1 KgDionex ASE 350 和 150 系统产品规格-适用于Dionex ASE 350 和 150 系统类型硅藻土分散剂数量.1 Kg描述ASE Prep DE,样品分散剂和干燥剂描述Dionex ASE 加速溶剂萃取仪系统Dionex ASE 系统可以通过在高温和高压下使用常见溶剂，对固体和半固体样品基质进行自动萃取、过滤和净化。 针对多种应用，有低通量和高通量系统可供选择。Dionex ASE 系统可在几分钟内萃取 1-100 g 的样品容量，允许进行多达 24 份样品的自动萃取，并且与其他方法相比使用的溶剂少 50% 至 90%。 化学惰性通路支持酸性和碱性基质和有机溶剂。 这些灵活、易于操作、性价比高的系统已经过美国 EPA 和 CLP 计划批准使用。多种产品可加至 Dionex ASE 萃取池中以去除水分、分散样品基质、中和矿物酸。062819 PROD,CHEM,DIATOMACEOUSEARTH,ASE,1KG 硅藻土

DIONEX戴安加速溶剂萃取仪系统微球状硅藻土戴安分散剂是微球状硅藻土，作为分散剂和干燥剂使用，专为与加速溶剂萃取仪系统而设计。 物料在样品被加入萃取池前与样品混合。 可以轻松与以 1:1 的比例混合，以在加速溶剂萃取条件下实现最佳水分去除。062819-样品分散剂和干燥剂1 Kg 350 和 150 系统产品规格-适用于350 和 150 系统类型硅藻土分散剂数量.1 Kg描述样品分散剂和干燥剂DIONEX戴安加速溶剂萃取仪系统微球状硅藻土描述系统可以通过在高温和高压下使用常见溶剂，对固体和半固体样品基质进行自动萃取、过滤和净化。 针对多种应用，有低通量和高通量系统可供选择。Dionex ASE 系统可在几分钟内萃取 1-100 g 的样品容量，允许进行多达 24 份样品的自动萃取，并且与其他方法相比使用的溶剂少 50% 至 90%。 化学惰性通路支持酸性和碱性基质和有机溶剂。 这些灵活、易于操作、性价比高的系统已经过美国 EPA 和 CLP 计划批准使用。多种产品可加至萃取池中以去除水分、分散样品基质、中和矿物酸。062819 1KG 硅藻土

GC 柱温箱加速插入套件-用于Agilent 6890和7890仪器Get the same GC separation in less time—use a GC Accelerator kit and the EZGC method translator to accurately convert methods to a scaled-down column format.Scaled-down methods let you speed up analysis time and increase sample throughput without capital investment.GC Accelerator kit installs easily without damaging the GC column or interfering with the MS interface.Designed with GC-MS users in mind, the GC Accelerator kit provides a simple way to speed up sample analysis. By reducing oven volume, these inserts allow faster ramp rates to be attained, which reduces oven cycle time and allows for increased sample throughput and more capacity to process rush samples. When faster ramp rates are used, existing methods can be accurately scaled down to smaller, high-efficiency, narrow-bore columns using Restek’s EZGC method translator. With a scaled-down column, a properly translated method, and a GC Accelerator kit, you can obtain the same chromatographic separation—often with greater sensitivity—in a fraction of the time without making a capital investment.订货信息：GC 柱温箱加速插入套件-用于Agilent 6890和7890仪器描述货号GC 柱温箱加速插入套件23849GC Accelerator UseInstallationTurn off the oven and wait until the oven, inlets, detectors, and MS transfer line have cooled. 2. Ensure the column and the column hanger are in the back position in the oven 3. If no detector is in the front position, install the two block inserts in front of the column asshown in Figure 2. If there is a detector in the front position, install the two block inserts infront of the column as shown in Figure 3.Caution: The block inserts should not touch the analytical column or the MSD source nut(Figure 4).4. Install the plate insert in the front of the oven so that the front is flush with the edge of theoven (Figure 5).RemovalTurn off the oven and wait until all oven, inlets, detectors, and MS transfer line surfaces havecooled.Caution: To avoid burns, use the strap to remove the plate insert or wear heat-resistant gloves.The metal fasteners and label tag on the plate insert may still be hot even after the GC oven hascooled down.Grip the strap on the plate insert and remove it by pulling the bottom edge out first(Figure 6).2. Remove the block inserts carefully do not allow them to contact the column or the MSDsource nut.