Dipcoater浸渍镀膜机

臂长：38; 48; 58; 68; 78 mm; 更长可定制
控制：全自动与手动控制模式
控制移动精度：1.25 micron

An automated dipping mechanism

浸渍镀膜机臂长：38; 48; 58; 68; 78 mm; 更长可定制
浸渍镀膜机控制：全自动与手动控制模式
浸渍镀膜机控制移动精度：1.25 micron

如有需要请通过我们伯英科技联系我们！

DESCRIPTION

VT-04 ::: Description ::: Features ::: Delivery set ::: Software       

浸渍镀膜机

An automated dipper unit VT-04serves for vertical translation of an object fixed on arm. The dipper unit can be, for instance, employed for automation of multicycle dipping of a substrate into vessel with liquid at the layer deposition from solutions.

The dipper unit design provides simple routine for an object fixing in a specialized clamp. The clamp has five degrees of freedom to provide the object position necesssay fot user. A possibility of manual rotation of the arm drive axis is supplemented with a possibility to position all the dipper unit on a vertical stand that provides vertical adjustment and rotation relative the stand axis.

For the dipper unit positioning in horizontal plane relative base, XY positioning stage can be employed together with it. Stepper motors of both the dipper unit and XY positioning stage can be driven from the same control program run on host PC.

Dipper unit VT-04 is unified with driving mechanism of microdoser DT-03that allows their mutual conversion by simple change of the unit front panel.

FEATURES

VT-04 ::: Description ::: Features ::: Delivery set ::: Software

浸渍镀膜机技术指标：

DELIVERY SET

VT-04 ::: Description ::: Features ::: Delivery set ::: Software

浸渍镀膜机组成模块：

* Above pictures are not in the same scale

** Host PC is not included in the delivery set 

SOFTWARE

VT-04 ::: Description ::: Features ::: Delivery set ::: Software

浸渍镀膜机软件：

Control software for dipper VT-04 is a unified program for driving three stepper motors. It is a 32-bit Windows application that runs under Windows XP SP2 and higher operating systems.

The software provides control over the stepper motor speed, motion range (in steps of the stepper motor or in mm) and motion direction.

The program can be employed for driving three stepper motors. If the device is additionally equipped with XY positioning stage, all the three axes motions can be automated.

As an alternative for the unified program, control program for Langmuir—Blodgett trough can be employed in which custom scripts can be used to control the mechanism motion.

Minimal configuration of host PC (not included in the delivery set): Celeron® 1.7 GHz, RAM 128 MB, HDD 40 GB, VRAM 64 MB, monitor 1024x768x32 bit, MS Windows® XP SP2, free USB port.