宁德三都湾海水网箱养殖区营养盐状况调查

文献名： Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者： Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要：In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词：Bismuth; Nanoparticles; Laser ablation; Cysteine

医疗污水包含了多种细菌、重金属、有机溶剂及酸碱溶液等生化有毒有害物质。如上述物质直接排放，将会对自然生态及人类生活环境造成危害。我国对医疗污水有清晰的排放标准。连华科技对于《医疗机构水污染物排放标准GB18466-2005》中所涉及的参数，多款便携及实验室仪器及耗材可满足检测需求

Millipak® Final Fill过滤器的特殊层叠式设计可最大程度地减少残留体积，从而增加产品回收。过滤器吹扫亦可有效降低折叠膜和层叠式过滤器使用后的残留量。

二氧化硅是用于检测、控制和尽量减少涡轮机、换热器和锅炉结垢的一种关键度量。在线实时测量活性二氧化硅可尽量降低因结垢而产生的维修/更换成本，实现安全高效的长期运行，这款在线二氧化硅分析仪可用于对二氧化硅超标的生产用水的去除或回收进行即时或自动的决策。连续实时二氧化硅监测可快速通知离子交换树脂的RO穿透或饱和情况，从而使系统效率最大化，尽量减少维修停机时间。Orion 8030cX 在线二氧化硅分析仪可配置为在二氧化硅峰值出现时发送警告/警报或测量数据来警告用户，触发纠正措施，防止下游出现问题。