电动开缺口机（悬臂梁、简支梁缺口）

melt,smoke,mill,fric,flink.cabon仪器信息

此具有创新性的仪器提供一个非常有效的全新的方法用 于日常质量控制，以便在开始生产前检查原材料的重要参数。 此单一仪器除具有普通熔融指数仪的功能外，还可获得几个重要数 据，包括断裂伸长率，熔体强度值，自动MVR测量，热降 解等等

橡胶测试仪器

多种橡胶测试仪器 冲击阻力----SCHOB 摆锤 橡胶和合成橡胶 用于测试样品直径从29—53mm (直径依此标明), 电子系统检测冲击. 符合ISO 4622, DIN 53512及相似标准 热固树脂硬化曲线图 用于模拟研究实验过程中的材料应力, 溶剂释放曲线图, 网状百分比和绝对阻抗值. 管材恒温水浴 配合管材样品水压试验, 各种不同的体积可以满足直径不同的管材测试, 体积从200升到5000升.

新品热塑性材料10T热压机

金属结构支撑整个设备;前面板包括主开关, 温控器, 压力表;面板装有压力控制,释放阀;后面装有水气进口和出口管;底部压板由液压活塞杆驱动,底部热压板由矩形金属支撑和铝制方形加热板(300x300mm)组成, 内部装有4只0.8KVA的加热源和圈状冷却水管,并有进水出水口;另外有一个( 6 mm., 深度150 mm)的孔,可用于插入外部温度计.上部压板与底板类似, 但装有安全温控器, 当温度超过300°C时停止加热. 工作压力范围: 10 to 100 kN 建议最大工作压力：70-80 kN 板间距: 0  150 mm. 电子器件, 数字温控器与板相互独立 冷却管(每块板一个)连接冷却回路(比如空气或水) 温度范围: 室温—300度 整体尺寸:900 x 750 x 1450 h mm 重量: 大约250公斤 压缩空气: 5 bar 冷却回路进水压力: 3 bar 电压:230V, 50Hz, 6.4kVA 有效加热板尺寸：300×300 mm 压板间可调节距离：0--200 mm 底板行程：180 mm，气动调节。 150mm直径指针压力表,满量程：630kg/cm2

30吨 实验室平板热压机

主要指标： 落地式设计 多级气动液压力系统 最大压力可达300kN 压板面积300×300mm 有效调节开启范围是0-200mm 操作温度可至300℃ 冷却管位于加热板内 可通过空气或循环水进行冷却 可选由微处理器数字程序控制的先进型号。 附件： 不同尺寸和不同厚度的模板

QUASAR50

The 50KN Quasar is the product of stale of the art design,built to the highest quality levels and has many advancde the technical features. Programming tests and monitoring resusts can be controlled through our powerful and intelligent grapwork 4.0 test software,which allow complete and accurate data management in accordance with European, North American and international Standards.

QUASAR25

The 25KN Quasar is the product of stale of the art design,built to the highest quality levels and has many advancde the technical features. Programming tests and monitoring resusts can be controlled through our powerful and intelligent grapwork 4.0 test software,which allow complete and accurate data management in accordance with European, North American and international Standards.

QUASAR10

The 10KN Quasar is the product of stale of the art design,built to the highest quality levels and has many advancde the technical features. Programming tests and monitoring resusts can be controlled through our powerful and intelligent grapwork 4.0 test software,which allow complete and accurate data management in accordance with European, North American and international Standards.

QUASAR5

The 5KN Quasar is the product of stale of the art design,built to the highest quality levels and has many advancde the technical features. Programming tests and monitoring resusts can be controlled through our powerful and intelligent grapwork 4.0 test software,which allow complete and accurate data management in accordance with European, North American and international Standards.

摆锤冲击仪的资料

本仪器根据ASTM，ISO，DIN，UNI，AFNOR等主要国际标准设计，用来进行单向冲击试验。 完善的配置使该仪器可以进行IZOD和CHARPY冲击，以及拉伸冲击和DYNSTAT等多种试验，可提供最高能量为25J的校正摆锤。 数据和结果管理系统在两种不同的环境下作业。仪器控制环境允许输入数据和存储结果，这对生成仪器控制图是必要的。 试验环境用于输入存储和计算试验数据（最多可存储50个实验数据）并且能打印出试验报告，独特的安全性考虑防止操作者在危险条件下使用仪器。

Newsletter_Testing_Jan_Feb_12

Energy and Technology at the forefront The engine of agriculture, Galdabini provides the top sector companies German technology tested with “made in Italy” Great innovative solutions from the world of cutting systems: WaterJet Technology Exhibitions,FOCUS ON WIRE AND TUBE 2012 GALDABINI now on YOU TUBE: a dedicated channel has been opened

news letter Apr-May2010

Galdabini Spa is very keen to improve its presence in strategical markets like China.

Newsletter_Testing_March-May_12.

The power of Made in Italy, Galdabini provides the top italian energy industry Electricity and Technology, Innovative testing solutions for plastics Focus on Exhibition’s world: WIRE AND TUBE, CONTROL & PLAST 2012 The future is Green, the value of environmental inside Galdabini premises

TESTING_Newsletter-SettOtt_ 2010

Cesare Galdabini Spa can nowadays propose an integrated solution which allow to test either EN and/or ASTM specimen with the same striker - It is therefore now possible to brake with the same striker either EN or ASTM charpy specimen. Galdabini can supply the relevant Charpy Certified specimen needed to carry out the indirect calibration.