非接触型直流扭矩变送器

仪器简介：Nonlinearity (% of full scale) ±0.1 Hysteresis (% of full scale) ±0.1 Nonrepeatability (% full scale) ±0.06 Accuracy (combined nonlinearity, hysteresis and non-repeatability, % of full scale) ±0.15 Rotational Effect on Zero (% of full scale) ±0.05 Remote Calibration Accuracy (% of full scale @ 75 deg F traceable to NIST) ±0.05 Temperature Effects: Zero (% of full scale/deg F.) ±0.003 Span (% of reading/deg F.) ±0.003 Compensated Range +75 to +175 deg F Minimum Useable Range -25 to +185 deg F Storage Range -65 to +225 deg F Outputs: Clockwise Torque +5 Volts Counterclockwise Torque -5 Volts Bandwidth: High Frequency Output dc to 500 Hz Low Frequency Output dc to 1 Hz Input Power 10.5 to 24 volts dc @ 85 mA, nominal 技术参数：扭矩测量范围：0.071-1.412Nm, 200%,400%输出范围：正反±5V抗电磁干扰频率响应范围：0-500Hz电源：10.5-24VDC，85mV主要特点：These low range models are available in capacities from 10 ozf-in to 200 ozf-in with overload ratings of 2X,4X full scale. With integrated signal conditioning electronics, they have dual ±5 volt dc outputs for direct interface with PC, PLC controllers and data acquisition systems.When installed between a driver and load, the sensor will measure static and dynamic shaft torque and speed (optional). A strain gaged titanium shaft senses torque and cancels bending and thrust. Robust, ferrite free rotary transformers connect the gages to noise immune carrier amplifiers. They don't generate noise or wear, are immune to magnetic fields, noise, vibration, lubricants and other hostile environments.These models incorporate new technology that hardens them to EMI generated by IGBT based adjustable speed drives. High stiffness to inertia ratios makes these sensors ideal for stepper motor and other dynamic applications. Maximum speed rating is 25,000 rpm. A dual track 512 PPR encoder is optional as is a line driver for its output(s).

仪器简介：General Specifications Code N Performance Code C Performance Accuracy (combined nonlinearity, hysteresis and Nonrepeatability, % of full scale) ±0.2 ±0.15 Rotational Effect on Zero (% of full scale) ±0.05 ±0.025 Temperature Effects: Zero (% of full scale/deg F.) ±0.007 ±0.003 Span (% of reading/deg F.) ±0.007 ±0.003 Compensated Range +75 to +150 deg F Minimum Usable Range +32 to +175 deg F Analog Output ±10 or ±5 Volts dc, user selectable Nominal Overrange (% of full scale) 30 Bessel Response Signal Filter Cutoffs 0.1 to 200 Hz in eleven 1-2-5 steps, user selectable System Resolution (% of full scale) 0.02% on ±10V & 0.04% on ±5V RS232 Communications Port Outputs Torque in engineering units. Inputs units of measure selection, scaling, signal filter selection and cal data. Supply Voltage 10 to 15 volts dc @ 200 mA, nominal 技术参数：扭矩测量范围：2.83Nm~1130Nm信号输出：+/-5V，+/-10V, RS232C其他信息请您咨询我们公司。010-82413547 82416475Email: 主要特点：These Compact Digital Torquemeters have high accuracy, low noise, high overload capacity, high overrange, inherent noise tolerance and a wide temperature range. Strain gage sensing and non-contact signal transfer make them well suited for control, laboratory and production use. They are offered in two accuracy grades, Code N standard performance and Code C enhanced performance. Installation can be either floating or foot mounted with the integral mounting base. Null, scaling and units of measure are stored in non-volatile memory. There are no noisy pots or switches. Ten common units of measure are supported without requiring recalibration. Eleven user selectable Bessel filters avoid delay distortion and overshoot errors. Included software interfaces Windows-based PC's and displays and plots real time data. Use it to select ±5V or ±10V analog outputs, filters, scaling, units of measure and/or to control measurements.

仪器简介：Nonlinearity (% of F.S.) = ±0.15 = ±0.07 Hysteresis (% of F.S.) = ±0.15 = ±0.07 Nonrepeatability (% of F.S.) =±0.07 = ±0.03 Accuracy (combined Nonlinearity, hysteresis and nonrepeatability, % of F.S.) =±0.15 =±0.08 Stability, 6 Months (% of F.S.) =±0.20 =±0.10 Rotational Effect on Zero (% of F.S.) =±0.10 =±0.03 Calibration Accuracy (% of F.S. @ 75 deg F, traceable to NIST) =±0.05 =±0.02 Temperature Effects: Zero (% of F.S./deg. F.) =±0.003 =±0.0015 Span (% of Rdg./deg. F.) =±0.003 =±0.0015 Compensated Range +75 to +175 deg. F +75 to +175 deg. F Minimum Useable Range -25 to +185 deg. F. -25 to +185 deg. F. Storage Range -65 to +225 deg. F. -65 to +225 deg. F. Zero Balance =±1% of F.S. =±1% of F.S. Outputs: Fully bi-directional, dual outputs with characteristics as follows: Clockwise (CW) Torque + 5 Volts Counterclockwise Torque (CCW) Torque - 5 Volts Overrange (% of F.S.) ±33 Measurement Bandwidth: High Frequency, dc to 500 HzLow Frequency, dc to 1 Hz Power Supply Requirements: 10.5 to 24 Volts dc at 85 mA, nominal 技术参数：扭矩范围：0.071-452400N-m, 过载：200%信号输出：±5V，±10V，可以直接连接到PC，PLC或数据采集器频率响应范围：1-500Hz主要特点：DC Operated Torquemeters are available in capacities from 25 lbf-in to 4,000,000 lbf-in with overload ratings of 2X full scale. Integral signal conditioning provides dual ±5 volt dc outputs proportional to torque. They will operate from a single power supply in the range of 10.5 to 24 volts dc (such as 12 volt batteries)When installed between a driver and load, the sensor will measure static and dynamic shaft torque and speed (optional). A strain gaged stainless steel shaft senses torque and cancels bending and thrust. Robust, ferrite free rotary transformers connect the gages to noise immune carrier amplifiers. They don't generate noise or wear, are immune to magnetic fields, noise, vibration, lubricants and other hostile environments.They are available in either shaft or flanged style configurations. Shaft end torquemeters are less costly than flanged models and can be either floated or foot mounted. Flanged models are much shorter and can be used when axial space is limited or when the highest shaft stiffness is needed