超声低温焊锡系统

MBR ELECTRONIC uss 9500超声低温焊锡系统（适用大面积焊接）-软钎焊，无需助焊剂 名称：MBR ELECTRONIC uss 9500超声低温焊锡系统（适用大面积焊接）品牌：MBR型号：USS-9210，USS-9510,USS-1908产地：瑞士产品描述：超声波焊锡工艺，无需助焊剂，可在常压下实现较难焊接材料及特殊母材（如玻璃、陶瓷、铝、钢、钛、硅、金属氧化物、超导体）的焊接。无需助焊剂，不会对母材表面产生腐蚀作用。高能量超声波振动在液态焊料中产生气穴现象清除待焊接母材表面的氧化膜。高压迫使液态焊料进入母材的微孔细缝中，密封住这些微孔细缝，使母材表面更加易于焊接。超声波振动挤出液态焊料中的气泡，实现表面无气孔的完美焊接。超声波焊锡工艺焊接效果好、品质高。在大多数运用中优于粘合剂粘结： - 无气泡 - 热耦合极快 - 耐热达250℃超声低温焊锡系统（适用大面积焊接）特点：√ 可焊接玻璃、陶瓷、铝、金属氧化物等√ 无需助焊剂√ 耐腐蚀大面积超声低温焊锡系统应用领域：用于实验室生产、研发。- 表面处理技术- 薄膜母材(气相沉淀- 传感器- 平板玻璃生产- 光学玻璃- 太阳能电池生产/维修- 半导体- LCD接触- 磁铁/烧结材料- 超导体（如铌）- 厚膜陶瓷母材- 玻璃纤维应用实例：1—将钛棒焊接到蓝宝石基板上2—太阳能电池接触：硅Si单晶片，薄膜太阳能电池、染料敏化太阳能电池3—铌线圈缠绕至微晶玻璃棒4—光学玻璃镀锡5—焊接120μm的玻璃光纤至0.5mm青铜孔中6—铜线电接触至玻璃基板的铝片上7—接触陶瓷碳混合超导体，焊接点直径0.8mm

MBR ELECTRONICS 超声低温焊锡系统配件主要有：空气供给系统、焊枪手柄（Ceramic heater陶瓷发热管、Soldering焊枪头、不锈钢套管、手柄电缆和脚踏板）、这些配件大部分我公司长期有备用现货，修理方便及时，欢迎大家咨询！MBR ELECTRONICS 超声低温焊锡系统配件Ultrasonic Soldering System USS-9210USS-9210 Ultrasonic Soldering System - for small area applicationsOrder #Description9210-00015WUSS-9210 Microprocessor controlled Ultrasonic Soldering System complete with hand tool (plastics moulding), 15W US-output, tool-stand, 3mm soldering tip, foot-switch, users manual and a sample set of all available Cerasolzer active solder alloyHand Tools15W hand tools operate soldering tip diameters 1 - 5mmOrder #Description9200-10115Wstandard ultrasonic hand tool plastic moulding incl. soldering tip at your choice 1 mm - 5mm without connecting cable9200-10315Wsoldering hand-tool 丨ight-version, (plastics moulding) incl. soldering tip at your choice 1 mm - 5mm without connecting cable9200-10615Wultrasonic soldering hand-tool with compressed air fitting for cooling of vibration unit incl. soldering tip at your choice 1 mm - 5mm without connecting cable diameter of tube air hose 4mm9200-10715Wultrasonic soldering hand-tool with compressed air fitting for cooling of vibration unit and enhanced heating of tip diameter of tube air hose 4mm airtight heater holder incl. soldering tip at your choice 1 mm - 5mm without connecting cable (ASC9000 air supply controller is available as accessory)9200-903Finger trigger for finger-tip activation of ultrasonic power (instead of foot switch) suits 9200-101 and 9200-106 only9200-315Hand tool cable 1.5m for finger trigger attachmentRobot Soldering Heads15W soldering heads operate soldering tip diameters 1 - 5mmOrder #Description9200-12115Wrobot soldering head, aluminum housing, with fan for cooling the vibration unit including soldering tip at your choice 1 - 5mm without connecting cable diameter of soldering head body/mount area 0 35mm9200-12215Wrobot soldering head, aluminum housing, with compressed air fitting for cooling the vibration unit, diameter of tube air hose 4mm including soldering tip at your choice 1 - 5mm without connecting cable diameter of soldering head body/mount area 0 35mm9200-12715Wrobot soldering head, aluminum housing, SLIM version with compressed air fitting for cooling the vibration unit and enhanced heating of soldering tip, incl. soldering tip at your choice 1 mm - 5 mm without connecting cable diameter of tube air hose 4mm diameter of main body/mounting area 0 27mm diameter mount area 0 22mm (ASC9000 air supply controller is available as accessory)

CERROBENDCERROBEND alloy is used as a filler for tube bending for tubes up to 1-3/4" anchoring bushings in drill jigs internal and external support of delicate parts for machining cores for spinning fusible mandrels in filament winding fiberglass lamination drop hammer and embossing dies used as a heat transfer medium in processing plastics, chemicals. The melting temperature is 158℉(70℃). It is ideal for craft applications, model railroading and a low temperature solder in electronics. It can be melted in a double boiler. It has a rapid immediate growth max @ .00057" per inch.CERROTRUCERROTRU alloy is used for holding jet turbine engine blades for machining, anchoring shafts in permanent magnet rotors, locator members in aircraft assembly fixtures. It is ideal for making nests for parts in jigs and dial feed stations cores for duplicate foundry and tracer model in profiling. It is great for molds for plaster, plastic, and encapsulating forming sheet plastics, plastic teeth, prosthetic development and potting electronic components. It is a nice low temperature solder and used for laps in rifle barrels. It also can be used for inlays in wooden handles. Cerrotru is a eutectic alloy with a melting temperature of 281℉. It has a net expansion of .0005" per inch. CERROTRU DOES NOT CONTAIN LEAD OR CADMIUM.CERROBASECERROBASE alloy is used to anchor cutlery handles, inserts in wood, metal and metal parts in glass. Make fusible spinning chucks, mandrels for electroforms, drop hammer dies, stretch form blocks, molds for plaster & plastics. It is used as a filler for tube bending of tubes over 1-3/4" hydrodynamic forming, seamless fittings, duplicate patterns in pottery and foundry, liquid metal autoclaves, heat treating. Cerrobase is a eutectic alloy with a melting temperature of 255℉. Initial shrinkage followed by a small growth. CERROBASE DOES NOT CONTAIN CADMIUMCERROCASTCERROCAST alloy parallels CERROTRU in its end uses and is also preferred by some for electroforming mandrels, lost wax pattern dies to greater dimensional accuracy and is also used for holding jet turbine engine blades while machining. Cerrotru has a Max. expansion of .0005" per inch where as Cerrocast has a shrinkage of -.0001" per inch. CERROCAST DOES NOT CONTAIN LEAD OR CADMIUM.CERROSAFECERROSAFE alloy was originally made for toy soldier castings. One of its most popular uses today is casting to check gun chambers. Cerrosafe shrinks during the first 30 minutes and at the end of one hour is EXACTLY the chamber size. Some other uses are casting cavities such as threads, dies, molds, blind holes, duplicate patterns in foundry matchplate making, support work pieces while machining spray coating wooden patterns, dental lab techniques, masks for electroplating. Cerrosafe is a non-eutectic alloy with a yield temperature of 162.5℉.CERROMATRIXCERROMATRIX alloy was originated by General Electric for anchoring punches in dies. It is used also to anchor non-moving parts in machinery, hold down bolts in concrete floors, locator parts in tooling docks. Used in split jaw chucks, jigs, and fixtures metal forming dies, form blocks, joggle jaws repair broken dies filling blow holes in castings. Cerromatrix is a non-eutectic alloy with a yield temperature of 240℉. CERROMATRIX DOES NOT CONTAIN CADMIUM.CERROLOW 117CERROLOW 117 alloy is used in jigging or fixturing delicate parts for machining, dental molds, prosthetic development work, proof casting (internal measurements), fusible element in safety devices, radiopaque contrast medium in X-ray, low temperature solder and many craft applications such as castings. Cerrolow 117 is a eutectic alloy with a melting temperature of 117℉. It can be melted in a double boiler. Intitial expansion then shrinks to .0000" per inch in 30 minutes.CERROLOW 136CERROLOW 136 alloy is used for proof casting, testing and inspection, anchoring parts for machining (jet blades), block lenses in optical manufacturing, fusible element in fire sprinkler heads and other safety devices, fusible cores on compound cores, sealing adjustment screws. Is a low temperature solder and in hobby applications. Cerro low 136 is a eutectic alloy with a melting temperature of 136℉. Initial expansion then shrinks to .0000" per inch in one hour. CERROLOW 136 DOES NOT CONTAIN CADMIUM.CERROSEAL 35CERROSEAL 35 alloy is used mainly for glass-to-glass, glass-to-metal and glass-to-ceramic sealing agent as well as a "lead free" "cadmium free" low temperature solder. It is used as a seal agent to solder metal caps on glass tubes such as in pressure gages. Cerroseal 35 is a non-eutectic alloy with a yield temperature of 244℉. Cerroseal 35 is available on one pound spool @ 1/16" diameter or in small ingots.典型用户：中科院物理所中科院合肥物质科学研究院北京航空航天大学中国科学技术大学中科院合肥物质科学研究院中国科学院大连化学物理研究所清华大学山东大学华南理工大学北京大学北京大学浙江大学西安交通大学香港大学人民大学东南大学香港浸会大学兰州近物所山东大学复旦大学中国科学技术大学 中国科学技术大学浙江大学西安交通大学复旦大学中科院物理所复旦大学物理系上海大学北京大学复旦大学物理系北京邮电大学中国科学院上海应用物理研究所中科院物理所中国科学技术大学中科院合肥物质科学研究院北京大学中科院物理所北京理工大学云南大学北京工业大学福建物质结构研究所中科院物理所山西大学物理电子工程学院厦门大学北京师范大学上海交通大学北京大学清华大学中山大学南京大学南京大学清华大学中科院理化所复旦大学香港中文大学南京大学复旦大学北京大学中科院物理所扬州大学中科院理化所北京工业大学广东工业大学