The FTE7500A-CWDM-12 offers up to 12 CWDM Wavelengths in a Single OTDR. These OTDRs may be order with 8, 10 or even 12 CWDM wavelengths. Standard units include 1471-1611nm for 8 wavelengths and 1431-1611nm for 10 wavelengths or configure a 12 wavelength unit using the 1471-1611nm 8 wavelength unit and add 4 additional wavelengths of your choice. Test a fiber at 1, 2 or up to 12 wavelengths with the touch of just one button. The Fault Finder mode uses one button to scan a fiber under test, have the OTDR select the best parameters at the selected wavelength and displays event analysis. The onboard Broadband Power Meter is calibrated at up to 12 CWDM wavelengths. to match the OTDR configuration. The FTE7500A-CWDM may be used as a CW light source. Select any of the configured wavelengths as a CW light source for commissioning or for Loss test with the onboard Power Meter.
The CertSoft Software Suite, project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image.
Features ? 35 dB Dynamic Range ? Express Help System ? CW & Fiber Identifier Light Source ? Video Scope With Pass/Fail Grading Zones ? Integrated Power Meter ? Bidirectional Trace Analysis with Certsoft ? Full Auto, Construction and Expert Modes ? Live Fiber Detection ? Onboard Memory of ~4000 traces ? CertSoft Report Software with .sor Capability ? Dual Trace Capability
Ordering Infomation
FTE-7500A-CWDM-12
1471-1611nm +4 Additional Wavelengths of Choice, CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)
FTE-7500A-CWDM-10
1431-1611nm 10 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)
FTE-7500A-CWDM-OE
1271-1411nm, 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)
FTE-7500A-CWDM-SCL
1471-1611nm 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)
FTE-SCASE-LG
Soft Case for FTE7500, FTE600 and FTE8000 Series
VIS-300
Video Probe For FTE7000 and FTE7500-CWDM and FTE7500-DWDM Series
FTE-7500A-CWDM Specifications
Wavelength
CWDM Wavelenghts (1271nm-1611nm) as Configured +/-3nm
Dynamic Range
35dB
Pulse Width
5 - 20,000 ns
Units of Measurement
km, kf, mi
Event Dead zone
1m
Attenuation Dead Zone
4m
Resolution
.125 - 32m
Distance Uncertainty
±(0.75m + 0.005% x distance + sampling resolution)
8.62” L x 4.25” W x 2.375” H(219mm L x 108mm W x 60mm H)
Weight
2 lbs
Communications ports
USB and USB Flash Drive Ports
Connector Styles
FC, ST, SC Interchangeable
Accessories Provided
Universal Power Adapter w/interchangeable mains, Interchangeable FC/ST and SC Adapters for optical port and FC, ST, SC, 1.25mm and 2.5mm universal adapters for power meter port, Software, Manual on CD and Protective Rubber Boot
Power Meter
Detector Type
InGaAs
Connector Type
Interchangeable - FC?ST/SC/1.25mm univ and 2.5mm univ.
Measurement Range
+5 to -77dB (CATV - +25 to -57dB)
Calibrated Wavelengths
As configured with OTDR wavelengths
Units of Measurement
dBm, dB
Resolution
.01 dB
Power Measurement Uncertainty
±0.18 dB under reference conditions
± 0.25 dB from 0 to -65 dBm
± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBm
CW Source
Fiber Type
Single mode, Multimode
Wavelengths
(Light Source Wavelengths are Limited by the OTDR Configuration)
Output Power
0 dBm
Laser Safety Classification
Class I Safety Per FDA/CDRH and IEC-825-1 Regulation