关注
已关注
已认证
粉丝量 0
400-860-5168转3759
仪器信息网认证电话，请放心拨打
Dionex CarboPac SA10-4μm碳水化合物分析柱
独立的单糖的快速生物燃料和食品样品和更好的分辨率和更容易峰识别和整合。 Thermo Scientific 戴安CARBOPAC?SA10-4μm柱产生比标准戴安CARBOPAC SA10柱高60?80％的峰值效率，从而提供了更好的分辨率和更容易峰鉴定和这些碳水化合物的集成。在4μm的柱分析仅需10分钟，或者少于8分生物燃料常见的单糖和双糖的食品样品中六种常见的糖。
Dionex CarboPac SA10-4μm碳水化合物分析柱
订货信息：
| 分析柱 | |
| Dionex CarboPac SA10-4μm Analytical Column (4 x 250 mm) | 088233 |
| Dionex CarboPac SA10-4μm Analytical Column (2 x 250 mm) | 088235 |
| 保护柱 | |
| Dionex CarboPac SA10-4μm Guard Column (4 x 50 mm) | 088234 |
| Dionex CarboPac SA10-4μm Guard Column (2 x 50 mm) | 088236 |
Dionex CarboPac SA10-4μm Column for Fast, High-Resolution Mono- and Disaccharide Analysis
The New Thermo Scientific? Dionex? CarboPac? SA10-4μm Column is designed for fast chromatographic analysis of simple sugars in Biofuel and Food samples. The peak efficiencies produced by the Dionex CarboPac SA10-4μm columns produce 60 – 80% higher peak efficiencies than standard Dionex CarboPac SA10 columns, thus producing better resolution and easier peak identification and integration. The Dionex CarboPac SA10-4μm column can analyze six common sugars in Food samples in only 10 min, or eight common Biofuel mono- and disaccharides in less than 8 min.
This is the first in a series of Dionex CarboPac columns that use smaller resin particles. The smaller particles produce more efficient peaks and better resolution making analysis easier and more reliable. The smaller particles also produce higher system back pressure (over 3000 psi) under standard operating conditions and therefore can only be run using Thermo Scientific? Dionex? HPIC? systems such as the Thermo Scientific Dionex ICS-5000+ HPIC system, which can operate up to 5000 psi.
The Dionex CarboPac SA10-4μm column should be used as a direct replacement for the Dionex CarboPac SA10 column only if an HPIC system is available
The polymeric Dionex CarboPac SA10-4μm column is packed with 4 μm supermacroporous substrate, coated with the same strong anion-exchange layer of latex nano beads as the Dionex CarboPac SA10 column, which provides high capacity and rapid, high-resolution separations. The Dionex CarboPac SA10-4μm columns feature high reproducibility, and can withstand thousands of injection cycles under high pH conditions.
| Thermo Scientific? Dionex? CarboPac? SA10-4μm Column for Monosaccharide and Disaccharide Analysis Specifications | |
|---|---|
| Dimensions | Dionex CarboPac SA10-4μm Analytical Column: 4 × 250 mm and 2 × 250 mm Dionex CarboPac SA10-4μm Guard Column: 4 × 50 mm and 2 × 50 mm |
| Maximum operating pressure | 5,000 psi (34.5 MPa) |
| Temperature range | 4–60 °C |
| Typical operating conditions | 4,000 psi at 1.5 mL/min (standard-bore column) or 0.38 mL/min (microbore
column) Recommended flow rate: 1.5 mL/min (standard-bore) or 0.38 mL/min (microbore) |
| Typical Eluents | Potassium hydroxide via Eluent Generation |
| Resin composition | 4-μm diameter sumpermacroporous substrate (ethylvinylbenzene 55% crosslinked with divinylbenzene) agglomerated with 55-nm MicroBead difunctional quaternary ammonium ion (4.5% cross-linked). |
| Anion-exchange capacity | Approximately 290 μeq/column (4 × 250 mm standard-bore column) Approximately 73 μeq/column (2 × 250 mm microbore column) |
| Column construction | PEEK |
Fast separation of biofuel sugars on the Dionex CarboPac SA10-4μm column.
Fast separation of food sugars on the Dionex CarboPac SA10-4μm column.
High-resolution separation of a high concentration corn stover hydrolysate sample.
Comparison of Dionex CarboPac SA10 (2 mm) and Dionex CarboPac SA10-4μm (2 mm) for the analysis of biofuel sugars.
| Product Specifications | |
|---|---|
 | Dionex CarboPac SA10-4μm Column Product Specifications |
| Manual | |
|---|---|
| Thermo Scientific Dionex CarboPac SA10-4μm Column Product Manual |
| Application Notes | |
|---|---|
| AN 1089: Determination of Carbohydrates in Acid Hydrolysates of Wood |
| Technical Notes | |
|---|---|
| TN 146: Fast Determinations of Lactose and Lactulose in Milk Products Using HPAE-PAD |
企业名称
北京豫维科技有限公司
企业信息已认证
企业类型
信用代码
110117020583826
成立日期
2016-01-21
注册资本
500
经营范围
技术开发、技术转让、技术服务;销售计算机软硬件及外围设备、建筑材料、金属材料、仪器仪表、五金交电(不含电动自行车)、家用电器、机械设备、厨卫用具、汽车配件、家用电器、日用品、电子产品、化工产品、环保设备、水处理设备、医疗器械I类;货物进出口、代理进出口、技术进出口;污水处理;销售第三类医疗器械。(企业依法自主选择经营项目,开展经营活动;销售第三类医疗器械以及依法须经批准的项目,经相关部门批准后依批准的内容开展经营活动;不得从事本市产业政策禁止和限制类项目的经营活动。)
北京豫维科技有限公司
公司地址
北京市平谷区兴谷经济开发区6区305-777号【QQ629136429】
客服电话
企业名称： 北京豫维科技有限公司
企业地址： 北京市平谷区兴谷经济开发区6区305-777号【QQ629136429】 联系人： 18911849923 邮编： 101299 联系电话： 400-860-5168转3759
仪器信息网APP
展位手机站