Dione CES 300毛细管电解抑制器
毛细管电解抑制器(CES 300),毛细管IC分析
在CES 300毛细管电解抑制器是为常见于毛细管系统洗脱液流量优化
(5 - 30μL/分钟)。当用于阴离子分析,ACES 300高度导电基于氢氧化淋洗液转换成纯净水,减少了基线电导率。同时抑制洗脱液中,ACES 300也被分析物转换成他们更多的导电离子(酸)的形式,增加电导检测下的灵敏度。同样,用于阳离子分析时,™300的CCES转换高度导电甲磺酸(MSA)淋洗液成纯净水;同时,分析物转化成其多个导电氢氧化物形式,增加了它们的灵敏度。
Dione CES 300毛细管电解抑制器
订货信息:
ACES 300 Anion Capillary Electrolytic Suppressor | 072052 |
CCES 300 Cation Capillary Electrolytic Suppressor | 072053 |
Capillary Electrolytic Suppressor (CES™ 300) for Capillary IC Analysis
The CES 300 Capillary Electrolytic Suppressors are optimized for eluent flow
rates typically seen in capillary systems
(5 – 30 μL/min). When used for
anion analysis, the ACES™ 300 converts highly conductive
hydroxide-based eluents into pure water, reducing the baseline conductivity.
While suppressing the eluent, the ACES 300 also converts the analytes into their
more conductive hydronium (acid) form, increasing their sensitivity under
conductivity detection. Likewise, when used for cation analysis, the
CCES™ 300 converts highly conductive methanesulfonic acid (MSA)
eluents into pure water; simultaneously, the analytes are converted to their
more conductive hydroxide form, increasing their sensitivity.
CES 300 Technology
The CES suppressor uses a three-chamber design to minimize dead volume while
maximizing suppression capacity and reducing noise.
The eluent chamber is comprised of an ion-exchange capillary membrane that
facilitates the efficient exchange of the eluent counter ions for regenerant
ions.
The regenerant chambers are divided into ion-exchange and electrode chambers.
Regenerant first passes through the ion- exchange chamber, which is filled with
a bed of ion exchange resin; the ion exchange capillary membrane is coiled in
this bed. The regenerant bed is an ion exchange resin in the opposite form as
the eluent. It is this bed of resin that provides the regenerant ions for the
capillary membrane eluent chamber.
There are two electrode chambers that are separated from the ion-exchange
chamber by a pair of ion exchange membranes. Regenerant, after passing through
the ion-exchange chamber, passes through the cathode and anode chambers
serially. When current is passed through the electrodes, regenerant ions are
generated in the first electrode chamber; these ions are pushed into the
ion-exchange chamber via an electric field, maintaining the ion exchange chamber
in the regenerant form. After counterions exchange from the eluent ion exchange
capillary membrane, they are are removed from the ion exchange chamber via the
electric field into the second Electrode chamber. Finally, the counterions are
neutralized by the ions generated in the second electrode chamber.
![Anion Capillary Electrolytic Suppressor (ACES 300)](http://www.dionex.com/en-us/images/page-cgram/img-85435-27168-flow-diagram.jpg)
Anion
Capillary Electrolytic Suppressor (ACES 300).
CES 300 System Control
The unique design of the CES 300 simplifies software and hardware control
options. For most applications, the CES 300 can be set to a single current
setting of 10 mA. For applications requiring very high eluent concentrations,
the CES 300 should be set to 20 mA. The ICS-5000 includes software and hardware
to control the CES 300 suppressor. Chromeleon 6.8 or 7.x is required.
Key Applications Using a CES Suppressor
![Separation of 22 anions on an IonPac AS19 Capillary column](http://www.dionex.com/en-us/images/page-cgram/img-85433-27243.jpg)
Separation of
22 anions on an IonPac AS19 Capillary column.
![Separation of six common cations using an IonPac® CS12A Capillary column](http://www.dionex.com/en-us/images/page-cgram/img-85434-27242.jpg)
Separation of
six common cations using an IonPac® CS12A Capillary column.
Capillary Electrolytic Suppressor (CES 300)
Specifications |
---|
Physical Specifications |
Dimensions (l × w × d): | 9.4 × 3.1 × 10.3 cm (3.7 × 1.2 × 4.1 in.) |
Weight: | 150 g (0.33 lb) |
Void volume: | <1.5 μL |
Chemical Specifications |
Temperature Range: | 15° C1 |
Recommended Backpressure: | 20–100 psi |
Maximum Eluent Flow Rate: | 0.030 mL/min |
Eluent Solvent Restrictions2: | <40% solvents in EWM3 |
Maximum Regenerant EWM3 Flow Rate: | 0.100 mL/min |
Modes of Operation Supported: | Recycle, EWM3 (recycle recommended)4 |
Maximum Current: | 20 mA (10 mA recommended for most applications) |
1Requires 15°C for recycled eluent mode of
operation.
2Solvents for anion eluents include methanol. Solvents
for cation eluents include acetonitrile and dioxane.
3EWM =
External Water Mode.
4Recycle recommended for aqueous applications
without solvent.
Data Sheets |
---|
![](http://www.dionex.com/assets/images/pdficonsm.gif) | RFIC
Eluent Suppressors for Ion Chromatography Data Sheet |
![](http://www.dionex.com/assets/images/pdficonsm.gif) | Thermo
Scientific Dionex Eluent Suppressors for Ion
Chromatography |
Manuals |
---|
![](http://www.dionex.com/assets/images/pdficonsm.gif) | CES 300
Capillary Electrolytic Suppressor Product Manual |
Dione CES 300毛细管电解抑制器 072052信息由北京豫维科技有限公司为您提供,如您想了解更多关于Dione CES 300毛细管电解抑制器 072052报价、型号、参数等信息,欢迎来电或留言咨询。除供应Dione CES 300毛细管电解抑制器 072052外,北京豫维科技有限公司还可为您提供豫维 YW-DD型氘灯、Vela C8 AQ 液相色谱柱、Vela Phenyl Hexyl 液相色谱柱等产品,公司有专业的客户服务团队,是您值得信赖的合作伙伴。