各种样品台(夹)
12-000110 EM-Tec GS10 swivel head sample holder for up to 10mm, gold plated brass, pin
EM-Tec GS10 – A swivel vise which covers a full 180 angle and can also be rotated with the stub. This is the ultimate holder for imaging cross sections at any desired angle. The swivel head size without clamping screws is only 16x16x14mm. The sample is clamped with the two clamping screws; the swivel head can be locked in place with the tilt clamping screw. Made from brass and plated with 1μm of pure gold.
12-000200 EM-Tec V22 compact vise type sample holder for up to 22mm, pin
EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with a pin. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws.
12-000300 EM-Tec V22 compact vise type sample holder for up to 22mm, M4
EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with M4 thread. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws. More info
12-000320 EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4
EM-Tec VS43 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth reversible vise jaws. Additional optionally available vise jaws are:
Vise jaw with a single 120° large groove for round samples Standard reversible vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw heigth from 12 to 24mm. Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.
The EM-Tec stub based SEM sample holders are all small SEM sample holders based on (modified) SEM sample stubs. They have the same footprint as the original SEM sample stubs and are directly compatible with the SEM stage or SEM sample stub holder. These affordable sample holders increase efficiency and reduce sample preparation time. Using sample holders reduces the use of conductive adhesives which can be a source of contamination. The EM-Tec stub based small sample holders formats are:
The pin stub based sample holders comprise the largest selection; they can be easily used on other SEM platforms by using the cost efficient EM-Tec SEM stub adapters. All EM-Tec compact SEM stub based SEM sample holders are precision machined from vacuum grade aluminium unless otherwise noted. Provided with set screws and allen keys.
Product # | Type | Mount sizes | Dimensions w/o pin | Mount holding | SEM stage comp. |
EM-Tec M26 | ?25mm / ?1” | ?34x12.5mm | Set screw | Standard 3.2mm pin | |
EM-Tec M26 | ?25mm / ?1” | ?34x12.5mm | Set screw | M4 thread | |
EM-Tec M26 | ?25mm / ?1” | ?34x12.5mm | Set screw | ?14mm JEOL stub | |
EM-Tec M32 | ?30mm / ?32mm / ?1-1/4” | ?40x12.5mm | Set screw | Standard 3.2mm pin | |
EM-Tec M32 | ?30mm / ?32mm / ?1-1/4” | ?40x12.5mm | Set screw | M4 thread | |
EM-Tec M32 | ?30mm / ?32mm / ?1-1/4” | ?40x12.5mm | Set screw | ?14mm JEOL stub | |
EM-Tec M40 | ?40mm / ?1-1/2” | ?48x12.5mm | Set screw | Standard 3.2mm pin | |
EM-Tec M40 | ?40mm / ?1-1/2” | ?48x12.5mm | Set screw | M4 thread | |
EM-Tec M40 | ?40mm / ?1-1/2” | ?48x12.5mm | Set screw | ?14mm JEOL stub | |
EM-Tec M51 | ?50mm / ?2” | ?59x12.5mm | Set screw | Standard 3.2mm pin | |
EM-Tec M51 | ?50mm / ?2” | ?59x12.5mm | Set screw | M4 thread | |
EM-Tec M51 | ?50mm / ?2” | ?59x12.5mm | Set screw | ?14mm JEOL stub |
我司还有各种各样的样品台,欢迎来电咨询。
企业名称
南京覃思科技有限公司
企业信息已认证
企业类型
有限责任公司(自然人投资或控股)
信用代码
913201067594581806
成立日期
2004-03-12
注册资本
500万元整
经营范围
电子光学仪器、光学仪器、分析仪器、测量仪器、仪器仪表研发及销售;计算机系统集成;计算机软硬件、工业自动化系统设计、安装、调试及技术服务;仪器仪表设备维修及销售;化工产品、耗材、建筑材料、环保设备、五金交电、办公设备、机电产品、日用百货销售;自营和代理各类商品及技术的进出口业务(国家限定企业经营或禁止进出口商品和技术的除外)。(依法须经批准的项目,经相关部门批准后方可开展经营活动)
南京覃思科技有限公司
公司地址
南京市中山北路281号新城市广场虹桥中心2-728B
客服电话