为您推荐相似的激光产品
Integrated OPO system
Automated wavelength tuning from 330 to 2600 nm
Up to 230 mJ in range 660 – 2600 nm
3 – 5 ns pulse duration
Hands-free, automated wavelength tuning from 330 to 2600 nm
Ultra-wide OPO signal tuning range from 660 to 1320 nm
Up to 230 mJ in range 660 – 2600 nm, 35 mJ in range 330 – 660 nm
Narrow linewidth across tuning range
3 – 5 ns pulse duration
Remote control via key pad or PC
Separate output port for 532 nm beam. Output for 1064 nm is optional
OPO pump energy monitoring
Fast Wavelength Switching within entire Signal or Idler ranges
Photoacoustic imaging
Flash photolysis
Photobiology
Remote sensing
Non-linear spectroscopy
High pulse energy (up to 230 mJ) is highly beneficial for photoacoustics imaging applications
Superior tuning resolution (1 – 2 cm⁻¹) allows recording of high quality spectra
High integration level saves valuable space in the laboratory
Flashlamps replacement without misalignment of the laser cavity saves on maintenance costs
In-house design and manufacturing of complete systems, including pump lasers, guarantees on-time warranty and post warranty services and spares supply
Variety of control interfaces: USB, RS232, optional LAN and WLAN ensures easy control and integration with other equipment
Attenuator and fiber bundle coupling options facilitate incorporation of PhotoSonus T systems into various experimental environments
PhotoSonus T series tunable laser seamlessly integrates in a compact housing a nanosecond optical parametric oscillator and Nd:YAG Q-switched laser.
Three models with different output pulse energy values and different repetition rates are offered. The most powerful model has more than 230 mJ pulse energy. Narrow linewidth (<10 cm⁻¹) is nearly constant trough almost whole tuning range, which makes laser suitable for many spectroscopy application.
The device is controlled from the remote keypad or PC using LabVIEW™ drivers that are supplied with the system. The remote pad features a backlit display that is easy to read even while wearing laser safety glasses.
System is designed for easy and cost-effective maintenance. Replacement of flashlamps can be done without misalignment of the laser cavity and deterioration of laser performance. OPO pump energy monitoring system helps to increase lifetime of the optical components.
Optional items are available allowing optimization of the laser system for Your application, for example:
Fiber bundle coupled output;
Energy meter;
Efficient second harmonic generator for 330 – 660 nm range;
Pulse energy attenuator;
Water-air cooled power supply.
Please inquire custom-build versions and options.
Due to continuous improvement, all specifications are subject to change without notice. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 700 nm and for basic system without options.
Optional signal extended range: 660 – 1320 nm.
When extended signal range is selected.
See tuning curves for typical outputs at different wavelengths.
At 700 nm or higher wavelengths.
When wavelength is controlled from PC. When wavelength is controlled from keypad, tuning resolution is 0.1 nm for signal, 1 nm for idler and 0.5 nm for SH.
FWHM measured with photodiode featuring 1 ns rise time and 300 MHz bandwidth oscilloscope.
Beam diameter is measured at 700 nm at the 1/e² level and can vary depending on the pump pulse energy.
Full angle measured at the FWHM level at 700 nm.
Separate output port for the 532 nm beam is standard. Output for 1064 nm beam is optional. Pump laser output will be optimized for the best OPO operation and specification may vary with each unit we manufacture.
Air cooled power supply is available as option.
Mains voltage should be specified when ordering.
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.
Related applications: Biomedical Photoacoustic Imaging
Related applications: Biomedical Photoacoustic Imaging
Related applications: Biomedical Photoacoustic Imaging
Related applications: Biomedical Photoacoustic Imaging
Related applications: Biomedical Photoacoustic Imaging
Related applications: Biomedical Photoacoustic Imaging
保修期: 1年
是否可延长保修期: 是
现场技术咨询: 有
免费培训: 一人次
免费仪器保养: 质保期内一次
保内维修承诺: 全天候电话邮件微信远程连接支援服务
报修承诺: 一周内到达用户现场开始维修
Ekspla激光产品PhotoSonus T的工作原理介绍
激光产品PhotoSonus T的使用方法?
EksplaPhotoSonus T多少钱一台?
激光产品PhotoSonus T可以检测什么?
激光产品PhotoSonus T使用的注意事项?
EksplaPhotoSonus T的说明书有吗?
Ekspla激光产品PhotoSonus T的操作规程有吗?
Ekspla激光产品PhotoSonus T报价含票含运吗?
EksplaPhotoSonus T有现货吗?
最多添加5台