布鲁克 QUANTAX EDS 能谱仪(TEM)
布鲁克 QUANTAX EDS 能谱仪(TEM)
布鲁克 QUANTAX EDS 能谱仪(TEM)
布鲁克 QUANTAX EDS 能谱仪(TEM)

¥50万 - 60万

暂无评分

布鲁克

暂无样本

Quantax透射能谱系列

--

欧洲

  • 金牌
  • 第7年
  • 一般经销商
  • 营业执照已审核
核心参数

产地类别: 进口

能量分辨率: <129 eV

峰背比: 20000:1

最大计数率: 1500 kcps

元素检测范围: Be-Cf

探测器面积: 10-300 mm²

窗口类型: 聚合物超薄窗/无窗可选

清晰的多功能测量装置和细管径几何构型可确保在常规基础上快速可靠的采集 TEM EDS 数据。使用 HyperMap 或谱图获取高光谱成像,我们的软件保存每个像素的谱图和定量分析所需的所有元数据,用于之后的检测和处理。

  • 适合不同电子显微镜极靴类型的的 EDS 细管径设计和优化的EDS 几何构型确保了MAX信号采集角和检出角

  • 有助于避免试样倾斜、吸收、阴影和系统峰

  • 无窗探测器可进一步提高检测效率,特别是在低能端,可用于轻元素和高核电荷数元素 K、L、M 和N 线系能量峰的检测

  • 默认模式下自动回缩和自定义可确保探测器更长的使用寿命和更丰富的实验应用

  • EDS 可用于原位实验,具有不断变化的数据流,比如高温实验

  • 全面的软件套件 ESPRIT,可用于在线和离线的数据分析


  • In the last decade, the EBSD technique has evolved - thanks to its combination with EDS - from being a tool for texture quantification to a complete microstructure characterization method. It is now more systematically used for quantifying grain size, phase distribution, grain boundary analysis and phase identification. EBSD analysis has become a standard analytical tool in Earth Sciences.

    地矿 2021-09-02

  • Quantitative analysis of a bulk sample requires that the composition of the sample is homogeneous over the analyzed volume. For inhomogenous samples the calculation of the matrix effects is not correct and this can lead to wrong results in the element concentrations. For samples containing a layer structure a different quantitative evaluation has to be applied. This can be provided with the standard-based analysis in ESPRIT in combination with the STRATAGem software.

    钢铁/金属 2021-09-02

  • Silicon drift detector (SDD) systems have become state of the art technology in the field of EDS (X-ray microanalysis). One of the main advantages of XFlash&#174; SDDs is the extremely high pulse load capacity of up to 750,000 counts per second combined with good energy resolution (&lt;123 eV Mn-K&#945;, 47 eV C-K at 100,000 cps). These two factors and modern data processing allow spectrum imaging where an entire EDS spectrum at each pixel of the SEM image is collected in a database termed “HyperMap”. This approach allows data evaluation with advanced analysis options, such as the Maximum Pixel Spectrum (Bright &amp; Newbury 2004, Application Note # EDS-04) for improved element identification and spectroscopic phase analysis called “Autophase” (Application Note # EDS-03) for evaluating the composition and area fraction of major and minor components.

    石油/化工 2021-09-02

  • Using an automated scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) to find and positively identify gunshot residue (GSR), has been an accepted method for forensic applications for quite a number of years.

    公安/司法 2021-09-02

  • In the last decade, the EBSD technique has evolved - thanks to its combination with EDS - from being a tool for texture quantification to a complete microstructure characterization method. It is now more systematically used for quantifying grain size, phase distribution, grain boundary analysis and phase identification. EBSD analysis has become a standard analytical tool in Earth Sciences.

    地矿 2021-09-02

  • The determination of different mineral phases through backscattered electron (BSE) detectors is a common task in mineralogy. This approach however has limitations. If minerals with different composition but similar average atomic number are viewed with a BSE detector there is very little if no material contrast to be observed. This shortfall can be overcome through use of X-ray elemental maps. The innovative XFlash&#174; 4010 SDD allows extremely high input and output count rates, hence elemental maps can be performed in about one tenth of the time required by conventional Si(Li) detectors.

    地矿 2021-09-02

  • Quantitative analysis of a bulk sample requires that the composition of the sample is homogeneous over the analyzed volume. For inhomogenous samples the calculation of the matrix effects is not correct and this can lead to wrong results in the element concentrations. For samples containing a layer structure a different quantitative evaluation has to be applied. This can be provided with the standard-based analysis in ESPRIT in combination with the STRATAGem software.

    钢铁/金属 2021-09-02

  • The measurements discussed in this document relate to a Cr-Ni-steel sample, the composition of which was originally determined with XRF and S-OES. Steel analysis using EDS generally deals with calculating the content of elements in the intermediate atomic number range through evaluation of the K-lines of the X-ray spectrum.

    钢铁/金属 2021-09-02

  • Using an automated scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) to find and positively identify gunshot residue (GSR), has been an accepted method for forensic applications for quite a number of years.

    公安/司法 2021-09-02

  • Silicon drift detector (SDD) systems have become state of the art technology in the field of EDS (X-ray microanalysis). One of the main advantages of XFlash&#174; SDDs is the extremely high pulse load capacity of up to 750,000 counts per second combined with good energy resolution (&lt;123 eV Mn-K&#945;, 47 eV C-K at 100,000 cps). These two factors and modern data processing allow spectrum imaging where an entire EDS spectrum at each pixel of the SEM image is collected in a database termed “HyperMap”. This approach allows data evaluation with advanced analysis options, such as the Maximum Pixel Spectrum (Bright &amp; Newbury 2004, Application Note # EDS-04) for improved element identification and spectroscopic phase analysis called “Autophase” (Application Note # EDS-03) for evaluating the composition and area fraction of major and minor components.

    石油/化工 2021-09-02

  • Portland cement is one of the basic materials in the construction industry. The principal component of Portland cement is clinker. According to the cement nomenclature, clinker contains two silicate phases: Ca3SiO5 (alite) and Ca2SiO4 (belite), as well as aluminate and ferrite. The alite to belite ratio is responsible for the strength of Portland cement in cement clinker. The ability of determining this ratio already during the burning phase is essential for the evaluation of the cement’s final strength.

    建材/家具 2021-09-02

售后服务承诺

保修期: 1年

是否可延长保修期:

现场技术咨询:

免费培训: 一次安装使用培训,不限次数应用培训

免费仪器保养: 基本仪器使用保养指导并现场服务

保内维修承诺: 所有服务及配件(人为损坏及消耗品除外)全部免费

报修承诺: 24小时内电话指导,48小时内现场服务

用户评论
暂无评论
问商家

布鲁克X射线能谱仪Quantax透射能谱系列的工作原理介绍

X射线能谱仪Quantax透射能谱系列的使用方法?

布鲁克Quantax透射能谱系列多少钱一台?

X射线能谱仪Quantax透射能谱系列可以检测什么?

X射线能谱仪Quantax透射能谱系列使用的注意事项?

布鲁克Quantax透射能谱系列的说明书有吗?

布鲁克X射线能谱仪Quantax透射能谱系列的操作规程有吗?

布鲁克X射线能谱仪Quantax透射能谱系列报价含票含运吗?

布鲁克Quantax透射能谱系列有现货吗?

布鲁克 QUANTAX EDS 能谱仪(TEM)信息由布鲁克电子显微纳米分析仪器部为您提供,如您想了解更多关于布鲁克 QUANTAX EDS 能谱仪(TEM)报价、型号、参数等信息,欢迎来电或留言咨询。
移动端

仪器信息网App

返回顶部
仪器对比

最多添加5台