德国DME样品转移装置

DME shutter

Sample Transfer Shuttle

for Zeiss FE-SEMs and SEM/AFM hybrid systems

Protect your sample from air exposure

样品转移装置 可配套用于蔡司FE-SEMs和SEM/AFM 混合系统

使样品免于暴露在空气中

The Sample T ransfer Shuttle: Increase of sample reliability

Protect your sample, which should not be exposed to air , by using the Sample Transfer Shuttle.

Transfer your sample easily and safely in vaccum or in an inert atmosphere between the SEM and the facilities for sample storage and preparation, e.g. a glovebox.

The Sample Transfer Shuttle is available for nearly all Zeiss FE-SEMs equipped with a Zeiss airlock.  Already existing systems can be updated.

The Sample T ransfer Shuttle: Simpler . More Intelligent. More Integrated.

Simple handling 

Infrared remote control for opening and closing the Sample Transfer Shuttle in the SEM airlock or in the preparation facility like glovebox, glovebags/inert gas sample bags

Qualified system for 

* battery and fuel cell research, 

* thin or etched film investigations, 

* organic electronics, 

* some sort of semiconductors, 

* hydrophilic crystals and many more,i.e. for all surfaces which should be 

protected from oxidation, corrosion, moisture, contamination, etc

Intelligent Solution

Sample transfer between glovebox and SEM is performed either in vacuum or in an inert gas atmosphere

Sample Transfer Shuttle remains in the airlook. Only the sample holder is 

moved onto the SEM stage, thus full problem-free stage maneuverability 

and no shadowing by the shuttle is guaranteed

Sample Transfer Shuttle is locked in and out through the airlock, thus there 

is no need to open the door of the SEM main chamber

Fully integrated system

A vailable for nearly all Zeiss SEMs equipped with a Zeiss airlock

Update of existing systems is possible without exchanging the airlock or SEM stage

Your Insight into the T echnology Behind It

Sample T ransfer Shuttle 

The Sample Transfer Shuttle is a small standalone container which allows the transfer of a sample holder from a glovebox to the SEM under definded air conditions.

It works fully autonomously , because it has its own electronic and battery . So, no external power source or feedthroughs into the SEM chamber are needed

The opening and closing of the Sample Transfer Shuttle is performed by infrared remote control

The shuttle chamber can be filled with an inert gas atmosphere or pumped to vaccum by a manual valve

Samples can be mounted either to standard SEM sample plugs (max. sample size 10 mm x 10 mm x 2 mm) or to the provided transferable holder , also used in the SEM-AFM, (max. sample size 10 mm x 10 mm x 6 mm)

The Sample T ransfer Shuttle at Work

T ransfer your sample easily and safely between SEM and glovebox

In the glovebox or in any other inert gas environment for preparation or storage, the sample is mounted onto the sample holder .  After opening the Sample Transfer Shuttle, the sample holder can be inserted into the shuttle. And the shuttle has to be closed.

The opening and closing of the Sample Transfer Shuttle is done by remote control from outside the glovebox

Now, the Sample Transfer Shuttle can be locked out of the glovebox and mounted into the SEM airlock.

After pumping the airlock to vacuum, the Sample Transfer Shuttle is opened by remote control, and the sample holder can be moved to the SEM microscope stage, using the standard Zeiss transfer rod, while the Sample Transfe

Shuttle remains in the airlock