产地：美国Thomas-wiley
Our smallest mill -
but still Wiley® tough
.1.6 inch diameter milling chamber - 1.7 cu. in.
.研磨腔的直径1.6英寸- 1.7立方米
.1to 25 gram sample volume
.样品量：1至25g.T
.hree speeds - 860, 1,700 and 3,700 rpm
转速：860，1700和3700 RPM
.All steel construction不
.锈钢结构
.Removable safety glass plate permits viewing of
sample during milling and allows easy access to interior for cleaning
.通过玻璃板可以清楚的看研磨腔内粉碎的全过程，方便内部的清洗。
With polished
chamber 40 mm diameter x 22 mm deep, two stationary blades and a rotor with
four cutting edges that revolve at high speed to produce a shearing action
which minimizes loss of moisture from heat. Produces a 20-gram, 40-mesh sample
of dried plant stem tissue in 15 to 20 minutes; a similar sample of extracted
leaf tissue in 7 to 10 minutes; or 13 mm pieces of soybean stems in 5 to 7
minutes. Dried samples are generally used, but tobacco with 12% moisture has
been milled satisfactorily.
抛光室直径40毫米×22毫米深，静叶片和转子有四个切削刃，在高速旋转产生的剪切作用，最大限度地减少热流失的水分。产生一个20克，40目样品在15至20分钟的时间内的经干燥的植物茎组织;类似的样品提取的叶组织，在7到10分钟，或13 mm大豆件茎在5至7分钟。通常是使用干燥的样品，但令人满意的12％水份的烟草已被磨碎
Samples introduced
through the hopper are swept around by the rotor until cut to sufficient
fineness to pass through sieve top of delivery tube which forms the bottom of
the chamber. Six interchangeable delivery tubes of varying mesh are available.
The 80 mesh size lacks ruggedness for general use but has been found convenient
for plant tissue which has first passed the coarser screens.
样品通过料斗引入由转子周围扫过，直到切割足够的细度，以通过输送管形成的腔室的底部的筛顶部。 6个可互换的输送管网不同。 80目大小缺乏耐用，适合一般使用，但已发现植物组织中已率先通过了粗糙的屏幕方便
These mills were
originally designed for grinding fertilizer materials, animal hair, hoofs, etc.
The hard, tool steel cutting edges on the knives allow milling of a wider range
of materials, including plastics, animal feed, bones, cables, cardboard,
electronic scrap, feed pellets, foils, food, leather, material mixtures,
non-ferrous metals, paper, pharmaceutical products, refuse derived fuels,
rubber, waste, wood and so much more.
这些工厂原本是设计用于磨硬，工具钢，切削刃的刀让铣削更广泛的材料，包括塑料，饲料，骨头，电缆，纸板，电子废料的肥料，动物毛发，蹄等颗粒饲料，箔，食品，皮革，材料的混合物，非铁金属，纸，医药产品，垃圾衍生燃料，橡胶，废物，木材和这么多。
Speeds of
approximately 860, 1,700 and 3,700 rpm are available by changing the pulley
position of belt. A screw top jar can be attached to the lower end of the delivery
tube by means of an adapter. Samples can be stored in the same jar. Small
samples are collected in a receiver 22 mm square x 19 mm deep.
约860，1700和3700转的速度可通过改变皮带轮皮带的位置。甲螺杆顶部jar文件可以通过适配器连接到输送管的下端。样品可以存储在相同的jar。小的样品被收集在一个接收器22平方毫米×19毫米深。
Steel Wiley® Mini
Mill
配置清单
Mini-Mills are
supplied with: 2.5" diameter stainless steel hopper with cover, wooden
plunger, three delivery tubes with Monel metal sieve tops of 20, 40 and 60-mesh
(other sizes available), each with receiver, two extra tool steel stationary
blades, two Allen wrenches, extra 3383N55 glass front plate, 3383N65 adapter,
three 4 oz. screw cap glass jars, and a brush. Overall dimensions: 14" W x
11" D x 12" H (356 x 279 x 305 mm).
3383L10, L20 and
L40 mills have 1/4 HP (186.5 W) motor, 3383L30 Mill has 1/3 HP (248 W) motor.
小型钢铁厂提供：2.5“直径不锈钢料斗盖，木柱塞，蒙乃尔合金筛顶部20，40和60目（其它尺寸），每个接收器，两个额外的工具钢固定的输送管叶片，两个内六角扳手，额外的的3383N55玻璃前板，3383N65适配器，3个4盎司。螺丝帽的玻璃瓶，和一个刷子，外形尺寸：14“W×11”D x 12“H（356×279×305毫米） 。
，3383L10，L20和L40厂有1/4 HP（186.5 W）3383L30的轧机有1/3 HP（248 W）电机的电机，。
Please Enter Your Order Info
THOMAS WILEY MINI-MILL,Steel
|
3383L10
|
WILEY MILL,115V,60HZ
|
3383L20
|
WILEY
MINI-MILL,115V,50/60HZ
|
3383L30
|
WILEY
MINI-MILL,230V,60HZ
|
3383L40
|
WILEY
MINI-MILL,230V,50HZ
|
THOMAS WILEY MINI-MILL,Stainless steel
|
3383L60
|
WILEY
MINI-MILL,Stainless Steel,115V,60Hz
|
3383L70
|
WILEY MINI-MILL,
Stainless Steel,230V,50Hz
|
