2017/04/03 21:51
阅读:268
分享:方案摘要:
产品配置单:
PTFE涂层苏玛罐 氟化采样罐
型号: PTFE涂层采样罐
产地: 加拿大
品牌:
¥5001 - 1万
参考报价
联系电话
CARB 1004醛/酮-DNPH 校准标准品 (13 种成分)
型号:
产地:
品牌: 瑞思泰康
面议
参考报价
联系电话
醛-酮-DNPH TO-11A校准混合物(15 种成分)
型号:
产地:
品牌: 瑞思泰康
面议
参考报价
联系电话
方案详情:
• Baseline separation ensures accurate determination of 15 commonly analyzed aldehydes and ketones in air samples.
• Raptor™ LC columns give you results in minutes—not hours—for increased sample throughput.
• Restek® certified reference materials are specially formulated for ambient air and automotive emissions testing.
Accurate analysis of aldehydes and ketones in air samples is an important part of monitoring programs that are used to control air pollution and to protect
human health around the world. These airborne carbonyls from industrial and vehicle emissions are precursors to ozone in smog and are associated with
respiratory and pulmonary problems. In addition, specific carbonyls—formaldehyde and acetaldehyde—have been identified as known or suspected
carcinogens. Prior to analysis, aldehydes and ketones are converted to hydrazone derivatives when they are captured on a sampling tube composed of
silica gel coated with 2,4-dinitrophenylhydrazine (DNPH). Then, the aldehyde/ketone DNPH derivatives are eluted from the sampling tube with solvent and
analyzed by HPLC-UV. Typically, carbonyl LC methods require long analysis times (often over an hour), but many still fail to provide adequate resolution for
some aldehyde/ketone DNPH derivatives.
To help labs improve analytical speed and accuracy in the analysis of aldehydes and ketones in air samples, Restek has developed LC columns, instrument
conditions, and certified reference materials that reliably provide baseline separation of commonly analyzed aldehyde/ketone DNPH derivatives in just minutes. For example, airborne carbonyls LC method U.S. EPA Method TO-11A uses a conventional C18 column and requires an analysis time of over one hour,
yet acrolein and acetone partially coelute and the o-, m-, and p- tolualdehyde isomers cannot be fully separated. In contrast, using a Raptor™ C18 column
under the conditions shown below, all 15 carbonyls—including the tolualdehyde isomer cluster—are separated to baseline in a fast 14-minute analysis.
Similarly, airborne carbonyl LC method CARB 1004 produces extremely long analysis times; in fact, this method requires two separate chromatographic
analyses in order to quantify all compounds. The first is a 37-minute analysis using two columns connected in series. Even with two columns and a long
analysis time, methyl ethyl ketone and butyraldehyde coelute in this analysis. To report these two compounds, another 30-minute chromatographic analysis with a different column is needed. However, this second analysis cannot be used to report all compounds due to the coelution of formaldehyde with a
non-carbonyl compound. This same list of CARB 1004 aldehyde/ketone DNPH derivatives can be fully resolved by the second Restek® method shown below
using a Raptor™ ARC-18 column in a fast 8.5-minute analysis—an 8-fold reduction in analysis time with a single column.
Both of these methods from Restek are compatible with conventional 400 bar HPLC systems and benefit from the larger, low-clog frit used in Raptor™
column hardware. Using either Raptor™ LC column—along with Restek’s airborne carbonyl reference standards—assures fast, accurate analysis of
aldehydes and ketones in air and offers an opportunity for improved sample throughput compared to typical columns and methods.
下载本篇解决方案:
更多
YSI防玷污的10个技巧
YSI 防玷污的10点技巧 随着电子技术的进步、电源管理的改进和电池寿命的延长,生物玷污成为目前决定监测仪器投放周期长度的决定因素,特别是应用于长期、连续监测。应用一些防玷污技术可以延长仪器的维护间隔,能够减少野外的仪器维护的次数,并提高水质监测数据精度。 防玷污技巧的详细内容请参考文章《YSI 防玷污的10点技巧》
环保
2014/03/04
方向效应:解决食品中金属检测的挑战难题
金属检测技术的局限性之一是对于像电线和大头针这样相对比较小的、长条形金属异物就很难检测出来。这些类型的污染物通常表现出“方向效应”,即金属探测器所检测到的信号很大程度上取决于污染物与探测孔的方向关系。方向效应给金属检测系统带来了挑战——这一挑战乍一看并不是那么严重,但事实上它可能会给消费者的安全以及品牌声誉带来严重的影响和危害。
食品/农产品
2021/01/19
4D-脂质组学高通量工作流程
Lipid profiling from complex lipid extracts can be a challenging and time consuming task. The high complexity of samples and co-elution of isobaric or isomeric compounds complicate the confident annotation of lipids. The presented 4D-Lipidomics workflow simplifies and streamlines the annotation and validation process using mobility-enhanced MS data.
医疗/卫生
2021/03/05
双相不锈钢的增强纳米压痕应用
Using Bruker’s Hysitron PI 88 SEM PicoIndenter equipped with tilt and rotation stages in conjunction with the QUANTAX EBSD system enables a more robust characterization of metallic materials by combining high resolution phase and grain orientation mapping capabilities with targeted nanomechanical property measurements. This combination could also be used to extend the scope of research related to other advanced textured, anisotropic, or multi-phase materials.
钢铁/金属
2021/09/02