建材可燃性试验机JC-8626D

??

产品用途：适用于在规定条件下判断建筑材料是否具有可燃性试验方法。

Product Features：Suitable for determining whether building materials under specified conditions flammability test methods.

符合标准：GB/T8626《建筑材料可燃性试验方法》。

Conform to the standard:GB/T8626buildingmaterialsflammabilitytestmethod.

主要参数：

The main parameters:

整套配置：本试验机由控制箱、燃烧箱本体、燃烧器、电磁阀、高压点火器、信号控制线及试样支架组成；

Complete configuration: this machine is composed of control box, box body, burning burner, electromagnetic valve, high pressure ignition, signal line and sample holder;

电源电压：AC220V±10%，50Hz；

The power supply voltage: AC220V plus or minus 10%,50hz;

气体纯度：>95%丙烷气；（客户自备）

Gas purity: gas purity>95%propane gas;( by advertisers)

施焰时间：0~99分99秒可设定；

Time toputaflame:0~9999seconds can beset;

持燃时间：0~99分99秒可设定；

The burningtime:0~9999seconds can beset

燃烧器尺寸为：燃烧器由孔径为￠0.17mm的喷嘴和调节阀组成，并设有四个￠4mm的空气吸入孔；

Burner size for: burner by the aperture of￠0.17mm of nozzle and regulating valve ,and is equipped with four￠airinletholeof4mm;

火焰高度：20±2mm；

Flame height:20 plus or minus 2mm;

燃烧器倾角：45°；

Burner Angle:45°;

点火系统：高压电子点火，自动点火、复位；

The ignition system: high pressure electronic ignition, automatic ignition and reset;

试样夹：两个U型不锈钢框架构成，宽15mm，厚5.0mm

Sample holder: two U-shaped stainless steel frames, 15mm wide and 5.0mm thick

烟道空气流速：在只点燃燃烧器和打开抽风罩的条件下，箱体烟道流速为0.7m/s,用风速仪测量，精度±0.1m/s.

Flue air velocity: Under the condition of only igniting the burner and opening the exhaust hood, the flue velocity of the box flue is 0.7m/s, measured with an anemometer, and the accuracy is ±0.1m/s.

设备结构：

Equipment structure:

本机器结构由燃烧箱、控制箱，两部份组成。

this machine structure is controlled by burning box，box，composed of two parts..

燃烧箱尺寸：L700*W400*H810（mm）

Combustion box size:W400*L700*H810(mm)

机箱材质：燃烧箱体采用优质(t=1.5mm)304不钢板，数控机床加工成型，圆弧造型美观大方。

Case material: combustion box body is made of high quality (t=1.5mm) 304 steel plate the numerical control machine tool processing molding, arc the beauty is generous.

喷灯：由我公司自制，黄铜材料，完全符合GB/T8626标准要求。

Blowtorch: made by my company, brass material, completely conform to the requirements of the standard GB/T8626.