OUR TEST RIGS FOR COMPONENT AND MATERIAL TESTING
High frequency pulsators
Energy-efficient, highly precise, and fast – your best universal tool for quick and cost-efficient testing.
Attaching test fixtures to universal resonance pulsators allow not only axial but also bending and torsional loads to be tested.
We offer our universal resonance test systems with two different drive systems: electromotive (MOT) and electromagnetic (MAG).
Resonance principlePOWER SWING MOT
Resonance principle
POWER SWING MAG
The ideal testing machine for testing materials and components with low clearance or damping.Product-DetailsGreen testing thanks to resonance test technology
Energy efficient resonance test systems help contribute to your emissions goals!
Resonance testing technologies high test frequencies reduce testing frequencies 10x, testing costs by 200x, and amortizes itself after one to two years on the basis of low energy costs alone compared with servo-hydraulic test systems.
Due to the universality of resonance test systems, almost all fatigue-relevant components and assemblies can be tested on them.
![](https://www.sincotec.de/wp-content/uploads/2020/11/Prueflabor-01-768x510.jpg)
Testing software EMOTION
Beyond single-step tests, our innovative and universal control and testing software EMOTION can be used for tensile tests, characteristic curve determination, block programs, RANTEC trials (operating load simulations), and fracture mechanical tests.
An overview of the advantages of resonance test technology:
![resonanz Resonanz](https://www.sincotec.de/wp-content/uploads/elementor/thumbs/resonanz-p3o625rgp5g0svb4aahaet795vo7l25etxpycfkypa.png)
Highest energy efficiency = very low energy costs + short test times
Automatic and precise crack detection thanks to the resonance principle which does not require optical detection systems
Shorter test times for lifecycle examinations
High accuracy of target values leads to scattering of real test results
Test costs are approximately 1 % compared to forcibly excited actuator test systems including through low maintenance requirements and the use of low-wear components
Low operating costs thanks to the resonance principle and low infrastructure requirements
Very low noise profile
Low space requirements
Proven test technology with over 1,500 test systems in use around the world
Use Areas: Component and material testing
Preferred Materials: Metallic materials, plastics, and elastomers with high hardness
Load Application: Single and multiaxial
Load Types: Axial (tension/compression), bending, torsion, internal pressure, rotation bending, and combinations of the above
Test Frequency Range: High, between 10 Hz to 500 Hz
Signal Type: Sine
High frequency pulsators高频疲劳试验机
标准设备 | POWER SWINGLY 5 kN, 10 kN, 20 kN POWER SWING MOT 50 kN, 100 kN, 150 kN, 250 kN, 400 kN, 600 kN,1.000 kN, 1,200kN, 1,500kN 及2,000kN POWER SWING MAG 5 kN, 10 kN, 20 kN, 50 kN, 100 kN, 150 kN, 250 kN, 400 kN, 550kN 600 kN |
Test rig material testing
POWER SWING MAG
Our magnetically driven high-frequency pulsator
up to 550 kN for material testing
POWER SWING MAG's capabilities
POWER SWING MAG is the ideal test machine for testing material samples and component tests with low clearances and damping.
Thanks to the resonance principle, POWER SWING MAG is highly energy-efficient, fast, and precise.
SincoTec’s control and test software ensures that all of our test systems are easy to use and guarantee simple and fast test sample exchanges.
![POWER SWING MAG](https://www.sincotec.de/wp-content/uploads/2020/10/Pruefmaschine_POWERSWINGMAG_Allgemein.-600px-1.jpg)
Test rig for fatigue testing
POWER SWING MOT
Your all-round talent for component testing
1 rig – over 1,000 uses
HIGHLIGHTS
Universally appplicable
Automatic crack detection
Short testing times
Energy efficient
Worlds largest test stroke
Perfect for asymmetric test fixtures because of the lack of effects from transverse forces
EXAMPLES
Rotor
Connecting rod
Transformer plate
Motor block
Prosthetic adapter
POWER SWING MOT's capabilities
The POWER SWING MOT is our all-purpose tool among the SincoTec test systems to generate static and dynamic testing of components and materials especially in the infinite and finite domains of fatigue life. The test rig can be used for almost every component and can generate all load types.
Thanks to the resonance principle the POWER SWING MOT is extremely energy efficient, fast, and highly accurate.
Want to see the POWER SWING MOT in action? Make an appointment in our test laboratory and come check it out.
![](https://www.sincotec.de/wp-content/uploads/2020/10/MG_0406-768x512.jpg)
![resonanz Resonanz](https://www.sincotec.de/wp-content/uploads/elementor/thumbs/resonanz-p3o625rgp5g0svb4aahaet795vo7l25etxpycfkypa.png)
Resonance
Your all-rounder for dynamic fatigue strength testing!
试样种类 | Screws, bolted connections, bolts
|
![](http://www.sincotec.cn/upload/1253023688-Schrauben_3.jpg)
![](http://www.sincotec.cn/upload/1253023688-Schrauben_3.jpg)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
Dynamic strength put to test
With our universal resonance pulsators with electromotive POWER SWING MOT drive or electromagnetic POWER SWING MAG drive, you have got the possibility to test screws or bolted connections regarding their dynamic strength.
The test systems are designed from 5 kN up to 1.000 kN.
In addition to the dynamic test system we offer you a clamping concept adapted to your application. Special clamping concepts guarantee a bending-free load application. Due to clamping devices, which can be changed quickly, the change period and standstill periods can be minimized. Using automated roboter technology the test service can be guaranteed 24 h/day.
Moreover the range comprises different special applications, with which e. g. the dismantling of wheel screws under temperature changes and under corrosion can be tested or with which con-rod screws can be tested in the original bond.
With wheel screw measurement segments you can test the impact of different material combinations / component combinations.
Beside the existing solutions or rather test systems, we respond specially to your requirements and develop for you with our flexible and dynamic team of engineers and technicians customized test systems.
发动机
试样种类 | 曲轴,凸轮轴,浓度杆,活塞,轴承支架,曲轴箱,轴承壳,摇摆杆,气门弹簧,气门,燃油轨,喷油管,机油和燃油滤清器,链条,张紧轮,其他附件等。 |
![](http://www.sincotec.cn/upload/1252586630-Motor_2.jpg)
![](http://www.sincotec.cn/upload/1252586630-Motor_2.jpg)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
快速与经济的试验方案
总体来说,以上所有部件都可以使用我们的电机式POWER SWING MOT共振试验系统来完成试验。
试验设备从5kN至2,000kN并且可以附带夹具,加载侧向载荷同时使用特殊的机械夹具装置还可以实现弯曲与扭转载荷
此外,我们还提供多种特殊试验装置来专门实现曲轴,凸轮轴以及弹簧等试验。
齿轮传动,传动装置
![](http://www.sincotec.cn/upload/1253023651-Getriebe_2.jpg)
![](http://www.sincotec.cn/upload/1253023651-Getriebe_2.jpg)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
![](http://www.sincotec.cn/images/tn_spacer.gif)
全面的测试程序
使用我们的标准设备如电机电机共振的POWER SWING MOT或者电磁共振的POWER SWING MAG,使测试试件的动态剪切强度或扭转强度成为可能
试验设备的应用范围从5kN直至2,000kN
在试验设备的基础上,我们同时根据您的应用配备相应的夹具。这样您就可以测试齿根处的弯曲疲劳或者是配置特殊夹具来完成扭转试验。
此外,该系列还括不同的扭转力共振测试系统,使用它可以使部件在更大的交变力及转动角上运行。
除了现有的解决方案,或者说测试系统,我们还可以您的特殊需求,我们的工程师和技术人员可以为您灵活的定制的创新的测试系统。