功能说明
由计算机判读碳黑分散度等级。
提供下列图像和文件的保存和打印:
(1)图像灰阶度分布图。
(2)粒子径分布图。
(3)粒度分析图。
规格说明
粒子及分散度分析:
根据ASTM-D2663的A法及B法,对二值化处理后的图像进行粒子数、粒子直径、粒子分布、粒子面积及粒子率等计算、统计比对,自动分析出碳黑与胶料混合比例等级。
ISO 11345菲利浦十等及自动判定:
将菲利浦(Pilips)10等之图样及数据存在计算机内作为比对基准,测试完成后自动为用户归类,显示其试样之级别。
用户随意标准自动判定:
除菲利浦10等及标准外,我们提供用户多达1000组的建档空间,可随时设定自己的标准图片供自动比对等级判定。
凝聚块测定范围设定及统计分析。
透过统计分析自动计算二值化阀值,去除二值化处理后因气泡造成之漫射现象。
更多
Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds
The incorporation of fillers into the rubber matrix is characterized by their macrodispersion as an indicator of the quality of mixing. This test method provides a measure of the macro-dispersion of reinforcing fillers, like silica and carbon black, as well as of inert fillers. Based on their polymer nature, different types of rubbers can show a different degree of acceptance for the incorporation of fillers, as indicated by their macro-dispersion.
3633KB
2016/09/08
Standard Test Methods for Carbon Blackx2014;Dispersion in Rubber 橡胶中碳黑分散度的标准试验方法
Visual dispersion ratings correlate with certain important physical properties of the compound. A rating of 5 indicates a state of dispersion developing near maximum properties, while a rating of 1 would indicate a state of dispersion developing considerably depressed properties. Normally, the visual dispersion ratings indicate the following levels of compound quality: Visual Dispersion Rating Classification
4425KB
2016/09/08
橡胶.碳黑和碳黑/硅土分散性的评估.快速比较法ISO11345-2006
橡胶.碳黑和碳黑/硅土分散性的评估.快速比较法 【英文名称】 Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods
7527KB
2016/09/08
D7723 - 11 Standard Test Method for Rubber Property Macro-Dispersion of Fillers in Compounds
Macro-dispersion of carbon black and silica in rubber compounds may be measured by different methods. Carbon black provides a direct physical reinforcement; silica requires a silane coupling agent in order to initiate reinforcement, and therefore, a different technology of mixing. Silica is also a non-conductor, making electrical methods of dispersion measurement impracticable. This test method is specifically appropriate for the characterization of the microdispersion in silica technology. This test method also can measure the mixing quality of colored rubbers. It uses variable exposure in order to be able to image a wide range of colors. This test method is intended for use in research and development as well as in quality control of filler processability in rubber and may be used for both the evaluation of production processes or referee purposes.
3633KB
2016/08/22
GBT6030-2006橡胶中炭黑和炭黑二氧化硅分散的评估快速比较法
GB/T 6030-2006 橡胶中炭黑和炭黑 二氧化硅分散的评估 快速比较法 本标准规定了评估橡胶中炭黑和炭黑/二氧化硅的宏观分散程度的定性、快速比较目测试验方法。 依据一套分为1~10级的标准照片来定级,结果用数字表示。本标准还规定了用数字等级来说明大团块状况的方法。 本标准替代GB/T 6030-1985
1859KB
2016/08/22
企业名称
青岛育肯仪器有限公司
企业信息已认证
企业类型
信用代码
370202228098591
成立日期
2003-07-15
注册资本
100
经营范围