您好,欢迎访问仪器信息网
注册
标准集团(香港)有限公司

关注

已关注

已认证

粉丝量 0

当前位置: 标准集团 > 解决方案 > 耐摩擦色牢度测试方法标准

耐摩擦色牢度测试方法标准

2015/06/18 16:28

阅读:236

分享:
应用领域:
纺织/印染
发布时间:
2015/06/18
检测样品:
检测项目:
浏览次数:
236
下载次数:
参考标准:
AATCC, ISO, ASTM

方案摘要:

标准集团(香港)有限公司技术部为您介绍摩擦色牢度测试仪的集中测试方法。摩擦色牢度测试仪使用的方法和标准应该根据用户实际需求来确定。我公司摩擦色牢度测试仪技术资料齐全,欢迎免费咨询交流021-64208466.

下载本篇解决方案:

资料文件名:
资料大小
下载
耐摩擦色牢度测试方法标准.docx
14KB
相关方案

NanoBrook产品应用-12-ZetaPALS

文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine

2015/04/16

城市污水中TOC与COD的关系

TOC与COD的测定方法不同。测定COD是采用强氧化剂和加热回流的方法,只能将水中的有机物部分氧化(氧化率较低),并且测定时间较长,即使目前一些快速的

环保

2017/11/16

中药提取类产品解决方案

从中药中提取分离化合物,第一步需要将中药材中的成分用有机溶剂提取出来,包括常规的有机溶剂浸泡,超声提取,超临界提取和加速溶剂萃取(Aseeker-600型加速溶剂萃取仪)等,得到一份总提物。

制药/生物制药

2021/01/04

方向效应:解决食品中金属检测的挑战难题

金属检测技术的局限性之一是对于像电线和大头针这样相对比较小的、长条形金属异物就很难检测出来。这些类型的污染物通常表现出“方向效应”,即金属探测器所检测到的信号很大程度上取决于污染物与探测孔的方向关系。方向效应给金属检测系统带来了挑战——这一挑战乍一看并不是那么严重,但事实上它可能会给消费者的安全以及品牌声誉带来严重的影响和危害。

食品/农产品

2021/01/19

推荐产品
供应产品

标准集团(香港)有限公司

沟通底价

提交后,商家将派代表为您专人服务

获取验证码

{{maxedution}}s后重新发送

获取多家报价,选型效率提升30%
提交留言
点击提交代表您同意 《用户服务协议》 《隐私政策》 且同意关注厂商展位