The MTM High Resolution Thickness Monitor will fit any of the Cressington sputter and carbon coating systems as well as other thin film vacuum coating systems which allow for a vacuum feedthrough of 10 mm diameter a on a plate thickness of 9 mm.
General Specifications:
Microprocessor based, 4-digit display, push-button zero
6MHz crystal with lifetime check
5 times per second update rate
Thickness Range:
0.0 - 999.9nm (pos/neg)
Resolution:
0.1nm for carbon
Density Range:
0.50 - 30.00g/cm³
Tooling Factor Range:
0.25 - 8.0
Processor Function:
Four sets of values can be stored in memory under Density and four under Tooling for both the MTM-10 and MTM20
MTM-20 Controller:
MTM-20 only: Programmable thickness termination function with termination interface cable on 108 auto, 208HR and DC-100
Termination facility range 0-999.9nm
General Specifications:
Microprocessor based, 4-digit display, push-button zero
6MHz crystal with lifetime check
5 times per second update rate
Thickness Range: 0.0 - 999.9nm (pos/neg)
Resolution: 0.1nm for carbon
Density Range:0.50 - 30.00g/cm