气囊点爆系统

气囊点爆系统

KEY TECHNICAL SPECIFICATIONS OF SOAK CHAMBER 主要技术参数

Interior dimension: D 800mm×W 1000mm×H 1200mm;

内部尺寸：800mm 深× 1000mm 宽× 1200mm 高;

Exterior dimension: D 1360mm×W 1500mm×H 2020mm

外部尺寸：1360mm 深× 1500mm 宽× 2020mm 高

Temperature range: -40 to +110°C;

温度范围：-40 to +110°C;

Temperature variation: +/-0.5°C

温度波动性：+/-0.5°C

Temperature difference: +/-2°C

温度偏差：+/-2°C

Temperature contrast: <2°C

温度均匀性：+/-2°C

Temperature rise speed: 升温速率

From +25°C to +110°C, duration < 50mins; (With load)

+25°C to +110°C 50 分钟以内 （带载）

Temperature fall speed: 降温速率

From +25°C to –40°C, duration<65mins;(With load)

+25°C to –40°C 65 分钟以内 （带载）

Load: 75kg Al 载荷：75Kg 铝

Note: All the above specifications are measured in the room temperature of +25°C, temperature performance test is

measured according to the related regulations of national standards of JJF1101-2003.

注：上述性能测定于环境温度为+25°C 的条件下，温度测定标准依据JJF1101-2003 国家标准

The noise from the machinery is less than 68dB.

噪音：低于68dB

Cabinet Structural Features 环境箱结构特点

Exterior wall materials : Plastic-sprayed steel-tin;

外壳：喷塑钢板

Interior wall materials : stainless steel plate;

内胆：不锈钢

Heat insulation materials: Hard Poly Urethane foamed plastic and advanced glass fibre;

绝热材料：聚氨酯泡沫塑料

Standard configuration : 2 fluorescent lamp, 2 shelves. We quote more shelves on request.

标准配置：两个荧光灯、两个隔架

The cabinet is equipped with the 1 d=100mm cable ports, with the sealing cap and silicone plugs.

环境箱配有一个100mm 直径的电缆孔，以及相应的硅橡胶密封塞及盖子

Door: Manual wing doors, open dimension: W 2000mm×H 1500mm;

门：手动门，尺寸：2000mm 宽×H 1500mm 高

Windows (with full-pane heaters to help keep condensation and frost clear):

Dimension W470×H320mm, Amount: 1 in door

观察窗：一个，有效视界：470mm 宽×320mm 高，带加热装置

Air-conditioning System 空气调节系统

Regulation and control: Air-compulsory cycle balance temperature regulation;

控制及调节：空气强制循环平衡温度调节

Air-cycle equipment: Centrifugal blast fan;

空气循环装置：离心风机

Heating: Nickel-chromium alloy heating wire heater;

加热：镍铬金属丝加热器

Humidifier:18-12-2.5 Cr-Ni-Mo stainless steel sheathed heater (surface evaporating system)

加湿器：18-12-2.5 Cr-Ni-Mo 不锈钢铠装加热器

Air cooling: Steam compression cooling;

空气冷却：蒸汽压缩制冷

Temperature measurer and sensor: Shielded heat resistance Pt100

温度测量传感器：铠装Pt100 热电阻

Cooling System 制冷系统

Coolant: Environment-friendly Fluorine coolant R404a,R23

冷媒：R404a,R23

Cooling compressor: “L’unite Hermetique TAG4573 6.5HP”×2 fully enclosed compressor (France)

制冷压缩机：2 台全封闭压缩机

Condensation mode: Built in cooling condenser

冷凝模式：内置冷凝器

Refrigeration mode: Mechanical compressed single & double stage refrigeration.

制冷模式：机械压缩单/双级制冷

Control system:控制系统

Type of controller: ZD-600;

控制器型号：ZD-600

Language: English

预言：英文

M-M interface: 6.4”, TFT liquid-crystal color display

人机界面：6.4”, TFT 液晶显示屏

Setting: Touch panel method

设置方式：触摸屏方式

Resolution: Temperature: 0.1°C, time: 1min;

显示分辨率：温度：0.1°C，时间：1 分钟

Set-range: temperature: Temperature:-100~ +300°C

温度设定范围：-100~ +300°C

User procedure capacity: 1000 programmable procedures, withmaximal 1000 steps(segments) in each procedure,1000

cycle steps, and the procedures is linkable;

编程能力：最多1000 个程序，每个程序最多1000 个步骤

Operation mode: constant value operation, procedure operation;

运行方式：程序方式、定值方式

Experimental data display: preset temperature, measured temperature, total operation time, segment operation time,

segment remaining time, heating status, and possible reason;

试验参数显示：设定温度、实测温度、总运行时间、程序段运行时间、程序段保留时间、加热状态、提示等

Failure information: in abnormal case, display the failure status and possible information;

故障信息：故障报警及原因、处理提示功能

Equipped with LAN interface to PC, and installed with the software to set parameters and records of temperature

parameters (with the software for PC printer)

配有与PC 连接的LAN 接口，可通过计算机及相关软件设定参数及纪律相关数据

Automatic selection of cooler’s working status: according to different experimental conditions, select the cooler’s

working status.

自动选择压缩机工作状态

Security protection system:保安装置

Over-temperature protection;过温保护

Over-pressure protection; 过压保护

Overload protection of motor;马达过载保护

Overheat protection of motor;马达过热保护

Over-pressure protection of cooling compressor;压缩机过压保护

Overheat protection of cooling compressor; 压缩机过温保护

Over-current protection of cooling compressor; 压缩机过流保护

Fuse for control and lighting circuit; 保险丝（防止控制回路和照明回路短路）

Equipment working condition: 设备工作环境要求

Environment:环境

Ambient temperature: 15°C to 35°C

温度：15°C to 35°C

Relative humidity: <=85%RH

相对湿度：<=85%RH

Quality of ambient air: no high-density powder and combustible or explosive gas or powder.

空气质量：无高浓度颗粒物或爆炸性气体

Power supply:电源

Power voltage: AC380±10%V, 3-phase 4-wire + ground wire protection

电压：交流380±10%V，3 相5 线制

Frequency: 50+/-0.5Hz

频率：50+/-0.5Hz

MAX. Power:18KW

最大功率：18KW

MAX. Current: 27 A

最大电流：27A

Recording function: The memory of the controller can record the test date for 3 month and the date can be downloaded

by USB.

记录功能：控制器内存可纪律3 个月的测试数据，数据可通过USB 接口导出

After-sale service: 保修

Charge-free warranty will last for 2 years from the date of equipment delivery. After the warranty period, the

user will be charged properly. Irregular examination and life-long service are available.

2 年保修期

Technical training:技术培训

Provide charge-free training to 2 operators for each user (in the company or the user site).

提供2 名操作者的免费培训

Accessories: 附件

The certificate of quality: one copy, Warranty card: one copy

质量合格证书：一份；保修卡：一份

Instruction Manual: one copy, Controller Manual: one copy

指导手册：一份；控制器手册：一份

Circuit diagram: one copy

电路图：一份