elan2digital™ 液氮生成器

Elan2主要参数：生产速度： 6-8 L / 24小时

贮存罐： 1L 或者 20L (0.095L/24小时, 工作周期135天)

可选液氮纯度： 98.6%

工作温度： 16-25℃

工作湿度：小于80% 

相对湿度除尘要求：普通实验室

防尘：标准办公环境（灰尘较多的环境需要更频繁地更换过滤器）

环境工作电压：中国标准220V电压

尺寸：发生器37 cm W x 37 cm D x 94 cm H 空压机45 cm W x 45 cm D x 38 cm H

主要特性：可靠性好，取材于空气，依赖MMR独有的制冷技术提取液氮。方便快捷，随时可以从贮存罐中取用，避免因液氮塔压力不够无法取出。安全性高，贮存罐自感应连接情况，并可对容量实时监控防止溢出。操作简单，操作面板功能丰富，直观明了。

The elan2 Office Liquid Nitrogen System is ideally suited for offices and laboratories that

require less than 1 L of liquid nitrogen at a time.ELAN2 办公室用液氮发生器系统，是办公室和实验室每次需要使用小于1L液氮应用的理想选择。

You start out each day with a fresh supply of 0.75 to 0.85L of liquid nitrogen stored in the

internal dewar of your elan2 Office Liquid Nitrogen Generator. To get what you need,

simply place one of the RFID safety dewars on the dispensing shelf and press a button. As

long as you press reh button, liquid nitrogen is dispensed into your container. 每天都能提供新鲜的0.75~0.85L 液氮存储于ELAN2的杜瓦瓶中。如需采集液氮，只需将RFID安全杜瓦瓶置于试剂架并按下按钮。只要按下reh按钮，液氮冲入瓶子。

Daily Production Capability日生产液氮能力: 5 L

Maximum Storage Amount for Usage at a time最大存储用量: 0.85L

Time to Refill Storage Dewar : 4 hours

Liquid Nitrogen Characteristics液氮品质:

Purity纯度: 98% pure (< 2% O2) with negligible water content immediately after dispensing

Temperature温度: 77 K / -196.15 oC / -321.07 oF

The elan2 Liquid Nitrogen Generator Autotransfer Station

Daily Production Capability日生产液氮能力: 5 L

Maximum Storage Amount for Usage at a time最大存储用量: 20 L

Static Evaporation静态蒸发量: 0.095 L / day

Normal Working Duration工作时间: 135 Days

Time to Fill Storage Dewar: 4 days

Liquid Nitrogen Characteristics液氮品质:

Purity纯度: 98% pure (< 2% O2) with negligible water content immediately after dispensing

Temperature温度: 77 K / -196.15 oC / -321.07 oF

Dimensions尺寸

elan2 Autotransfer Station and 20L dewar: 35 inches (66 cm) wide x 17.5 inches (33 cm) deep x 37

inches (94 cm) high

Air Compressor (up to 15 feet away): 17.5 inches (33 cm) wide x 17.5 inches (33 cm) deep x 15 inches