多通道多功能电化学工作站

输力强光电测试系统DSSC

输力强光电测试系统DSSC样本，包含Modulab模块及光学平台，测试方法包含：IMPS,IMVS,EIS,I-V，电荷抽取等。

The reliability of electrochemical noise and current transients characterizing metastable pitting of Al–Mg–Si microelectrodes

Current transient measurements and electrochemical noise (EN) method have been used to characterize the metastable pitting events for Al–Mg–Si microelectrodes (diameter 50lm) in deaerated neutral 0.5 M NaCl solution.

The Use of Conducting Polyaniline as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid

Sulfonated chitosan (S-CTS) doped polyaniline (PANI) was synthesized by “template-free” method successfully, and it is reported as corrosion inhibitor for the first time. The corrosion inhibition property of PANI was demonstrated for mild steel in acidic environment using weight loss test, Tafel polarization, electrochemical impedance spectroscopy (EIS), scanning electronic microscope (SEM) and adsorption isotherm.

Characterization and corrosion studies of titania-coated NiTi prepared by sol–gel technique and steam crystallization

Nickel titanium (NiTi) was dip-coated with titania via the sol–gel route using titanium butoxide (Ti(OC4H9)4) as precursor. The as-coated titania film was crystallized to form anatase by treatment in steam at 1058C. The crystallized film was relatively thick (about 750 nm) and even. Atomic force microscopy (AFM) revealed that the film was dense with a surface roughness of about 3 nm, and was composed of particles of about 100 nm. X-ray diffractometry (XRD) showed that these particles were composed of nanocrystallites of a few nanometers.

Carbon-coated graphene–Cr2O3composites with enhanced electrochemical performances for Li-ion batteries

普林斯顿电化学综合测试仪P4000在锂电方面的应用，石墨烯-Cr2O3复合物产品的C-V（循环伏安）和EIS（交流阻抗测试）