搜全站
搜展位
优莱博技术（北京）有限公司
关注
已关注
品牌合作伙伴
白金18年
已认证
粉丝量 0
400-675-6560
仪器信息网认证电话，请放心拨打
解决方案
检测总碱度
应用领域
检测样品
检测项目
Determination of basic constituents in petroleum products by potentiometric titration with perchloric acid in glacial acetic acid. The total base number (TBN) is the quantity of perchloric acid, expressed in terms of equivalent number of milligrams of potassium hydroxide (or alternatively in milli-equivalents of hydroxide per gram), that is required to neutralize all basic constituents present in 1 g of sample when titrated under the prescribed conditions.
暂无关联产品
检测总酸度
应用领域
检测样品
检测项目
Determination of acidic constituents in petroleum products and lubricants by potentiometric titration. The total acid number TAN is the quantity of base, expressed in milligrams of potassium hydroxide, that is required to neutralize all acidic constituents present in 1 g of sample.
暂无关联产品
检测应用水总硬度
应用领域
检测样品
检测项目
This method is used for the quantitative determination of total hardness in drinking water.
The total hardness is the sum of calcium and magnesium hardness. It is possible to titrate the Ca- and Mg hardness with a Ca-ISE electrode as two equivalence points (EQs) in one titration. But it is recommended to use the more robust Cu-ISE for the determination of total hardness
暂无关联产品
JULABO ACE 夹套玻璃反应器的温控选型
应用领域
其他检测样品
其他检测项目
加热量及制冷量损耗率(n)，计算单位%
与传热介质接触物另一界面相接触的空气、设备其他部分的传热也应该考虑进去，因这一部分无法计算，只能估计，可视为冷热量损耗。即使传热介质接触物的保温措施做得很好，损耗也不可能避免，只能降低损耗率。
共3台
ACE Glass 2升双夹套反应釜使用优莱博Presto LH 85的温度控制案例分析
应用领域
其他检测样品
其他检测项目
ACE Glass Inc. 开发了一种新型的使用双夹套的玻璃反应釜。除了常规使用的导热介质夹套，该反应釜还配置了一个可以抽真空的夹套。这个真空夹套层进一步防止了系统的散热损耗。该夹套的另外一个好处就是防止反应釜表面在低温状态的结霜现象，使用者可以在反应的整个过程中清楚地观察反应的进程。下面的图片是在夹套中冷媒温度在-55℃时的状况！请注意在真空夹套的表面没有结霜的现象。
共2台
高压釜在超临界流体技术的应用
应用领域
其他检测样品
其他检测项目
超临界流体具有许多独特的性质，如粘度小、密度、扩散系数、溶剂化能力等性质随温度和压力变化十分敏感；粘度和扩散系数接近气体，而密度和溶剂化能力接近液体。超临界流体具有特殊的性能，最常见的是超临界是二氧化碳，其临界温度为31.06℃，临界压力为7.38Mpa。
共2台
高压釜在生物质能源转化的应用
应用领域
生物产业检测样品
生物能源检测项目
人类的工业文明依靠化石能源取得了辉煌的成就，随着需求量的急剧上升，全球化石类资源日益减少，绿色化学的概念已经深入人心，在传统的化学化工正面临人类可持续发展要求严重挑战的新世纪，寻找新的有机化工原料，确定新的平台化合物，自然成为消除环境污染、实现可持续发展为目标的绿色化学的重要研究内容。
共2台
优莱博滴定仪对水硬度检测的应用
应用领域
环保检测样品
环境水（除海水）检测项目
物理指标根据DIN 38 406 - E 3-3标准检测海水、饮用水、地下水的总硬度，如果废水中的金属离子含量不高，也可以用来检测废水的硬度。
共3台
检测有机溶剂中水分含量
应用领域
石油/化工检测样品
其他检测项目
This method is a general description how to determine the water content in organic liquids such as methanol, isopropyl alcohol, glycol and other similar liquids.
共3台
检测维生素C（DCPIP法）
应用领域
食品/农产品检测样品
其他检测项目
其他Preparation of the 2,6-Dichlorphenolindophenol solution (0,001 mol/L)
163,1 mg 2,6-Dichlorphenolindophenol are weighed into a 400 mL beaker and filled up to 250 mL with distilled water. This solution is than stirred for 20 minutes at 50°C. After this it is filltrated into a 500 mL volumetric flask. For stabilisation 50 mg potassium hydrogen carbonate may be added. After that the flask is filled up with distilled water.
共3台
检测碱性（高氯酸滴定法）
应用领域
其他检测样品
其他检测项目
Determination of the exact concentration of the Perchloric acid titrant with Potassium hydrogen phthalate
We recommend ready to use a “ready to use” titrant. The Potassium hydrogen phthalate (volumetric standard) should be dried at 120 °C for at least two hours before use and stored in desiccator.
共3台
检测果酱类物质钙含量
应用领域
食品/农产品检测样品
蔬菜及水果制品检测项目
其他Preparation of ammonium chloride/ammonia buffer solution pH= 10
54 g Ammonium chloride for analysis are dissolved in 200 ml DI water. To this solution is added 350 ml of 25% Ammonia solution “Analytical grade”. Then it is filled up with DI water to 1 liter
共3台
检测化学需氧量
应用领域
其他检测样品
其他检测项目
Titer standardisation of the titration solution
The titer of the solution is determined in use on a daily basis. To do so, 10.0 ml of the potassium dichromate solution 0.02 mol/l are diluted with water to approx. 100 ml. 30 ml of sulphuric acid are added carefully to this solution. After cooling down the solution is placed on the magnetic stirrer and titrated using 3 times the method ?Titer COD“. A triple determination is carried out. The average value is automatically calculated in mol/l and stored into the exchange unit.
共3台
检测食品中的氯离子或氯化钠（盐）含量
应用领域
食品/农产品检测样品
其他饮料检测项目
理化分析Standard titration
For a standard titration weigh in 70- 90 mg of the NaCl standard in a 150 ml beaker, add appr. 80 ml dist. water and 1 ml HNO3 1 mol/l. Place the electrode and
共3台
检测水样或废水中的游离氯或总氯含量
应用领域
环保检测样品
废水检测项目
物理指标200 ml sample (measuring cylinder; for chlorine concentrations > 2 mg/l use less sample and fill up with dist. water to 200 ml) are filled into a 250 ml beaker. Add 1 ml KI solution and 1 ml buffer solution pH = 4.0 and titrate with the phenylarsine oxide to an equivalence point (potentiometry) or μA endpoint (amperometry)
共3台
检测水的碱度
应用领域
环保检测样品
环境水（除海水）检测项目
物理指标Titrator: TL 6000-M2/20 or TL 7000-M2/20 consists of
? Basic device
? Magnetic stirrer TM 235
? 20 mL exchange unit WA 20, with brown glass bottle for titrant complete
? pH combination electrode with integrated temperature sensor (A 162 2M-DIN-ID, N 1052 A, BL 18…)
共3台
检测牛奶或奶制品的酸值
应用领域
食品/农产品检测样品
蛋白饮料检测项目
理化分析测量：氢氧化钠溶液0.1mol／L（therner），0.25（SH）金（dornic 0.11）mol／L
?苏打石灰for二氧化碳吸收of the试剂。
?titer：邻苯二甲酸氢钾（参考资料）
共3台
异氰酸酯NCO中NCO含量的检测
应用领域
石油/化工检测样品
其他检测项目
主要成分含量Determination of the exact concentration of the HCL titrant
We recommend ready to use HCl titrant. The exact concentration of the HCL 1.000 mol/l can be determined using the titrimetric standard Tris hydroxy amino methane (TRIS). The standard can be dried for 24 h in an exsiccator at room temperature.
1-2 g of the standard are weighed accurately in a 150 mL beaker and dissolved in 80 mL of dist. water with stirring. It is titrated with the 1 mol/l HCl solution.
Repeat the standardization two times. The average value is stored automatically in the exchangeable unit.
共3台
凯氏定氮法最后一步（酸碱滴定法）
应用领域
其他检测样品
其他检测项目
The method is suitable for samples which contents nitrate or protein. The sample is digested with sulfuric acid in the presence of a catalyst. This converts organically bound nitrogen to ammonium sulfate.
In a distillation apparatus the digestion solution is treated with NaOH and the released ammonia (NH3) is distilled into a solution of boric acid. This solution is then titrated with an acid titrant (HCl or H2SO4) to a pH endpoint of 4.65.
共3台
滴定靛蓝和保险粉
应用领域
其他检测样品
其他检测项目
In the 100 mL glass beaker (tall form) are added 50 ml of the NaOH 0.1 m solution + 1 ml of a 5 % dispersing agent solution. The titration head is placed on the beaker and the solution is then purged with nitrogen for 5 minutes. To this solution are then pipetted 5 or 10 ml of the Indigo sample solution. Load the suitable method and start the titration.
共3台
检测挥发性有机酸（FOS）和总无机碳（TAC）
应用领域
其他检测样品
检测项目
Titrator: TL 6000_M2/50 consists of
? Basic device
? Magnetic stirrer TM 235
? 50 mL exchange unit WA 50, with brown glass bottle for titrant complete
? pH combination electrode A 7780 DIN ID
共3台
检测过氧化值
应用领域
其他检测样品
其他检测项目
The peroxide number gives the initial evidence of rancidity in unsaturated fats and oils. Other methods are available but peroxide value is the most widely used. It gives a measure of the extent to which an oil sample has undergone primary oxidation.
共3台
检测脂肪或油类的皂化值
应用领域
食品/农产品检测样品
乳制品检测项目
营养成分Determination of saponification number in fats and oils, fatty acids, resins and other organic technical solvents. The saponification number is expressed as the quantity of mg KOH that is required to saponificate 1 g of sample.
共3台
检测葡萄酒中SO2的含量
应用领域
食品/农产品检测样品
饮料/酒类检测项目
理化分析This application note descripe the titration procedure with iodine solution.
共3台
检测葡萄酒中可滴定总酸
应用领域
食品/农产品检测样品
饮料/酒类检测项目
理化分析This method is used for the quantitative determination of total acidity in wine and most. The total acidity is calculated as g/L tartaric acid.
共3台
检测石油产品中的水分含量
应用领域
石油/化工检测样品
原油检测项目
水分含量The application describes the procedure of the coulometric water determination in petrochemistry products such as mineral oil and similar products. The application note describes only the direct titration and not the use of evaporation oven.
共3台
检测植物油中的水分含量
应用领域
食品/农产品检测样品
食用油、油脂及其制品检测项目
营养成分The application describes the procedure of the coulometric water determination in vegetable oil products such as olive-, sunflower or similar vegetable oil.
共3台
联系方式：
公司名称： 优莱博技术(北京)有限公司
公司地址： 北京市朝阳区酒仙桥东路1号院M8号楼A区411室 联系人： 市场部 邮编： 100015 联系电话： 400-675-6560
主营产品：
友情链接：
仪器信息网APP
展位手机站