M2N(微纳伙伴) 样品台（夹） 样品台

各种样品台（夹）

 12-000110   EM-Tec GS10 swivel head sample holder for up to 10mm, gold plated brass, pin

 EM-Tec GS10 – A swivel vise which covers a full 180 angle and can also be rotated with the stub. This is the ultimate holder for imaging cross sections at any desired angle. The swivel head size without clamping screws is only 16x16x14mm. The sample is clamped with the two clamping screws; the swivel head can be locked in place with the tilt clamping screw. Made from brass and plated with 1μm of pure gold.

 12-000200   EM-Tec V22 compact vise type sample holder for up to 22mm, pin

 EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with a pin. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws.

12-000300   EM-Tec V22 compact vise type sample holder for up to 22mm, M4

EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with M4 thread. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws. More info

12-000320   EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4

 EM-Tec VS43 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth reversible vise jaws. Additional optionally available vise jaws are:
Vise jaw with a single 120° large groove for round samples Standard reversible vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw heigth from 12 to 24mm. Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.

The EM-Tec stub based SEM sample holders are all small SEM sample holders based on (modified) SEM sample stubs. They have the same footprint as the original SEM sample stubs and are directly compatible with the SEM stage or SEM sample stub holder.  These affordable sample holders increase efficiency and reduce sample preparation time. Using sample holders reduces the use of conductive adhesives which can be a source of contamination. The EM-Tec stub based small sample holders formats are:

• Standard pin stub based compact sample holders

• JEOL cylinder stub based sample holders

• Hitachi M4 stub based sample holders

The pin stub based sample holders comprise the largest selection; they can be easily used on other SEM platforms by using the cost efficient EM-Tec SEM stub adapters. All EM-Tec compact SEM stub based SEM sample holders are precision machined from vacuum grade aluminium unless otherwise noted. Provided with set screws and allen keys.

我司还有各种各样的样品台，欢迎来电咨询。

M2N(微纳伙伴) 样品台（夹） 样品台信息由南京覃思科技有限公司为您提供，如您想了解更多关于M2N(微纳伙伴) 样品台（夹） 样品台报价、型号、参数等信息，欢迎来电或留言咨询。

除供应M2N(微纳伙伴) 样品台（夹） 样品台外，南京覃思科技有限公司还可为您提供荷兰Micro to Nano（简称M2N）电镜耗材、M2N(微纳伙伴) 样品台（电镜用） 样品台、HFV-7501高真空硅脂(密封脂)电镜耗材等产品，公司有专业的客户服务团队，是您值得信赖的合作伙伴。