阴离子捕集柱原理

Dionex CR-ATC连续-再生阴离子捕获柱连续去除阴离子污染物洗脱剂没有离线化学再生的需要，选择hermo Scientific? Dionex cr-atc连续再生阴离子捕集柱。这种高压、电解再生捕集柱是专门为免试剂离子色谱（RFIC）系统。当探测的Thermo Scientific Dionex EGC墨盒后，戴安cr-atc 500阱柱移除所有阴离子污染物（如碳酸盐）从去离子给水在梯度运算提供了低漂移。Dionex CR-ATC连续-再生阴离子捕获柱订货信息：CR-ATC Continuously Regenerated Anion Trap Column060477CR-ATC Continuously Regenerated Anion Trap Column (Capillary) (For use with Capillary Anions Columns)072078CR-ATC 500 Continuously Regenerated Anion Trap Column075550 Dionex Integrion HPIC System088662Dionex Integrion HPIC System088663Reduces Baseline Drift by Removing ContaminantsDesigned for eluent generators in Reagent-Free? (RFIC?) systems, Thermo Scientific? Dionex? CR-ATC 500 columns remove all anionic contaminants in the eluent continuously and provide very low baseline drift during gradient operations.The Dionex CR-ATC 500 offers:Contaminant-free deionized source water and eluentTime savings—no need to perform the regeneration off-lineVery low baseline drift for improved integration and increased sensitivityIncreased productivity quality data soon after startupRemoval of carbonic acid contaminants from source waterCompatibility with Capillary RFIC-EG systemsSupport for HPIC? system pressures up to 5000 psi (34.5 MPa, Dionex CR-ATC Capillary and CR-ATC 500 only)The Dionex CR-ATC 500 column is compatible with all Thermo Scientific Dionex Eluent Generators including the RFC-30, ICS-2100 and ICS-5000+ IC systems. EG40 customers must first order the Dionex CR-TC Add-on Kit (P/N 060476). The Dionex CR-ATC (Capillary) column is compatible with all Dionex Capillary Eluent Generators such as the ICS-4000 and ICS-5000+ EG. The single format Dionex CR-ATC 500 is used with both microbore and standard-bore applications, while the Dionex CR-ATC (Capillary) is available for capillary scale applications. Continuously Regenerated Trap Column SpecificationsCR-ATC 500 SpecificationsHardware Dimensions( h × w × d)5.1 cm × 5.5 cm × 8.4cm(2.0 in. × 2.15 in. × 3.3 in.)Weight:60 g (0.13 lb.)Current Output: 125 mAConstant Voltage:24 V dcVoid Volume: 100 μLCR-ATC (Capillary) SpecificationsHardware Dimensions( h × w × d)5.1 cm × 5.5 cm × 8.4cm(2.0 in. × 2.15 in. × 3.3 in.)Weight:60 g (0.13 lb.)Current Output:1 mAConstant Voltage:12 V dcVoid Volume: 2 μLProduct ManualsContinuously Regenerated Trap (CR-TC) Column Product ManualProduct Data SheetsConcentrator and Trap Columns Data Sheet

Dionex IonPac ATC-HC 硼酸盐阴离子捕获柱使用的Thermo Scientific戴安的IonPac ATC-HC和ATC-HC阴离子500捕获柱剥离的去离子水或RFIC-EG淋洗液阴离子污染物，以防止他们到达门卫或分析柱。这些高容量捕获柱是专门为RFIC-EG系统使用而设计的。的戴安的IonPac ATC-HC500列是相同的戴安的IonPac ATC-HC柱，但填充在柱体，其与在HPIC系统压力高达5000磅（34.5兆帕）不停运转兼容。Dionex IonPac ATC-HC 硼酸盐阴离子捕获柱订货信息：IonPac ATC-HC Anion Trap Column Borate Form (9 x 75 mm)064755PROD,COL,IP,ATC-HC 500,BORATE FORM075979The ATC-HC Borate Form Anion Trap Column is a high capacity anion-exchange trap column designed for use with borate eluents. The ATC-HC Borate Form is placed between the pump outlet and inlet of the EGC-KOH II cartridge to strip anionic contaminants from the deionized water and prevent them from reaching the guard and analytical columns.IonPac ATC-HC Borate Form Anion Trap Column SpecificationsDimensions:IonPac ATC-HC Borate Form Anion Trap Column: 9 × 75 mmMobile Phase Compatibility:0-50% HPLC solventsSubstrate Characteristics:Bead Diameter: 55 μmCrosslinking (%DVB): 8%Functional Group Characteristics:Ion-Exchange Group: Quaternary ammoniumHydrophobicity: LowCapacity:4.0 meq (9 × 75 mm)Data SheetsConcentrator and Trap Columns Data SheetManualsIonPac ATC-HC and ATC-3 Product Manual?

Dionex IonPac ATC-3 and ATC 500 阴离子捕获柱Thermo Scientific dionex IonpacATC-3 和ATC-5阴离子捕获柱在高容量，低效率的阴离子交换树脂，在羟基的形式。柱从氢氧化物或硼酸盐淋洗液剥离痕量污染物。陷阱被安装在现有的喷射阀，以防止梯度层析期间假峰，并尽量减少梯度操作期间基线漂移洗脱液线。在一个RFIC-EG系统陷阱可以放置在Thermo Scientific的戴安EGC盒出口和喷射阀之间。在这种结构中，戴安的IonPac ATC-3和ATC500非常适合于梯度RFIC-EG洗脱液由于其低死体积。该戴安ATC的IonPac500支持HPIC系统压力达5000磅（34.5兆帕）。Dionex IonPac ATC-3 and ATC 500 阴离子捕获柱订货信息：配件Trap Column / Suppressor Clean-Up Kit059659ATC-3 4 mm Anion Trap Column (9 x 24 mm)059660ATC-3 2 mm Anion Trap Column (4 x 35 mm)079932PROD,COL,IP,ATC 500, 2MM079018PROD,COL,IP,ATC 500,4MM,9X24MM075976The Thermo Scientific? Dionex? IonPac? ATC-3 and ATC 500 Anion Trap Columns contain a high-capacity, low-efficiency, anion-exchange resin in the hydroxide form. The columns strip trace contaminants from hydroxide or borate eluents. The traps are installed in the eluent line prior to the injection valve to prevent spurious peaks during gradient chromatography and to minimize baseline shifts during gradient operation. In an RFIC-EG system the traps can be placed between the Thermo Scientific Dionex EGC cartridge outlet and the injection valve. In this configuration the Dionex IonPac ATC-3 and ATC 500 are ideally suited to gradient RFIC-EG eluents due totheir low dead volume. The Dionex IonPac ATC 500 supports HPIC? system pressures up to 5000 psi (34.5 MPa).IonPac ATC Anion Trap Column SpecificationsATC 500 SpecificationsDimensions9 × 24 mm (4 mm applications)4 × 35 mm (2 mm applications)Mobile phase compatibility0–50% HPLC solventsSubstrate characteristicsBead Diameter: 55 μmCross-Linking (%DVB): 8%Functional group characteristicsIon-Exchange Group: Quaternary ammoniumHydrophobicity: LowCapacity1.5 meq (9 × 24 mm, 4 mm applications)0.35 meq (4 × 35 mm, 2 mm applications)Max. Operating Pressure34.5 MPa (5000 psi)ATC-3 SpecificationsDimensions9 × 24 mm (4 mm applications)4 × 35 mm (2 mm applications)Mobile phase compatibility0–50% HPLC solventsSubstrate characteristicsBead Diameter: 55 μmCross-Linking (%DVB): 8%Functional group characteristicsIon-Exchange Group: Quaternary ammoniumHydrophobicity: LowCapacity1.5 meq (9 × 24 mm, 4 mm applications)0.35 meq (4 × 35 mm, 2 mm applications)Max. Operating Pressure20.7 MPa (3000 psi)Data SheetsConcentrator and Trap Columns Data SheetManualsIonPac ATC-HC and ATC-3 Product Manual