时域反射仪原理

FTE7000A-DWDM OTDR波分复用光时域反射计The FTE7000A-DWDM is a Tunable DWDM OTDR with 89 wavelengths from the C Band spectrum. These 89 wavelengths are available in a single hand-held, tunable OTDR. The FTE7000A-DWDM also operates as Tunable Light source with 0 to +5 dBm output. Use the FTE7000A-DWDM for commissioning and troubleshooting DWDM Metro Ethernet Networks. The FTE7000A-DWDM OTDR offers one-touch auto test with up to 89 DWDM wavelengths, Automatic Pass/Fail summare with Fib-R-Map trace analysis and allows for testing throught MUX and DEMUX units. Use the Supplied Cert-Soft software to produce complete networks test documentation. The FTE7000A-DWDM also includes a auto pass/fail video scope with auto image centering. FTE7000A-DWDM OTDR密集波分复用光时域反射计 Features? Tunable OTDR with 89 C Band Wavelengths? Tunable CW/Pulsed Laser Source w/ 50/100GHz Spacing? Touch Screen Operation ? Fib-R-View Auto Pass/Fail/Centering Fiber Inspector ? Fib-R-Map Comprehensive Event Analysis? 89 Channels (17-61) on the ITU Grid? 35 dB OTDR Dynamic Range? 12 Hour Li-ion Battery Pack? Bidirectional Analysis? Bluetooth Android Tablet Operation? Report Generating Software Included Applications? Fiber Characterization in DWDM Networks? Varify ROADM Channel Routing? Wavelength Provisioning ? Test through OADMs? In service DWDM Network Trouble shooting? CBH Antenna Feeds Ordering InformationFTE-7000A-DWDM C Band DWDM Tunable OTDR/Laser Source 1528-77nm - 1563-86nmFTE-DWDM-KFTE7000A-DWDM OTDT/Laser Source and FTE8100-C Mini OSA VIS300Video Probe for FTE7500A-CWDM and FTE7500A-DWDM and FTE7000 SeriesVideo ProbeFTE7000A-DWDM OTDR SpecificationsStandard Wavelengths1528.77-1563.86nm @ 0.4 and 0.8nm Spacing Dynamic Range35dBPulse Width5 - 20,000 nsUnits of Measurementkm, kf, mi Event Dead zone1m Attenuation Dead Zone4m Data Pointsup to 120,000Resolution .125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution)Full Scale Distance Range1-240km Typical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048Linearity ± .05 dB/dBMemory Capacity(Internal) ~1000TL SpecificationsFrequency Range192 - 196 THz (1529-1563nm) Accuracy 1.5 GHzLine Width 1 MHz Side Mode Suppression Ration45 dB Output Power Range+8 dBm to +14 dBm (C Band) Power Setting Resolution0.01 dB Power Variation over Wavelength Range± 0.5 dB Minimum Channel Spacing 50 GHz (0.4nm)Fiber Type9/125 μm ±Relative Intensity Noise-140 dB/Hz General SpecificationsGraphical Display4 in Color Touch Screen Power Supply / Charger Input 100-240V 50-60Hz, 0.6A / Output 15V, 1.2ABattery / Operating Time Rechargeable Li-Ion / 10 hourStorage Temperature -20 to 60 COperating Temperature Range-10 to 40 C Dimensions (w/out rubber boot )7.75” L x 4.5” W x 2.25” H (197mm L x 114mm W x 57mm H) Weight1.7 lbs Communications / PortsBluetooth / USB-PCConnector StylesFC, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC and SC Adapters, Windows/Telcordia SR4731 Software, Rubber Boot and Manual on CD, 2 stylus FTE7000A-DWDM OTDR密集波分复用光时域反射计

太赫兹时域光谱仪(台式) 筱晓光子供应太赫兹时域光谱仪(Benchtop)，如下模块组成：飞秒激光器、光导天线、延迟线、脉冲发生器、锁相放大器、密封样品室、操作软件、笔记本电脑。该系列THz太赫兹时域光谱仪是一种透射式检测系统，为了便于将系统扩展至反射模式和成像模式，外部光纤耦合模块可供选择。SpecificationsTDS1008 with 800nm laserTDS1010 with 1040nm laserTDS1015 with 1560nm laserSpectral range0.05-3.5Thz0.05-2.5Thz0.05-2ThzDynamic range60dB60dB50dBScan range500ps (2GHz resolution)THz beam diameter22mm (collimated beam)/1-3mm (focussed beam) Sample size55×55mm (collimated beam)/5×5mm (focussed beam)Supply voltage100-240V, 50-60HzDimensions600×600×250mm3Weight50kg

FTE7500A 36/35dB OTDR 高级Cobra 光时域反射计 FTE-7500光时域分析仪测试速度快， 使用方便，经济，坚固。这款光时域分析仪具有手携式仪器的全部优点,具有短的盲区，明亮的4英寸显示屏，机载背景系统帮助使用者学习，1/2秒的刷新速度，动态范围大，易于操作使用。 这些特性使其在各类网络领域获得广泛应用。该产品不仅方便老用户操作，也受到新用户的欢迎。FTE-7500提供如下3种组合：850/1300 MM, 1310/1550 SM and quad (850/1300/1310/1550) ，坚固的外壳设计可在任何工作环境中使用。FTE-7500的测量距离可以达到240km, 在LAN网络测试中具有优良的表现性能。 Features? 36 dB Dynamic Range? Instant On? 1 Meter Dead Zone ? Event Table with Pass/Fail Feature? Trace Overlay Capability? Onboard Memory for ~500 traces? Auto Test Power Meter? Stable Light Source? Built in Video Inspection Scope ? Visible Fault Locator? USB Flash Drive Port and Mini USB Port? Context Sensitive Help? Light Weight Rugged Enclosure? Easy To Read Color Display? CertSoft Report Software? Long Battery LifeOrdering InfomationFTE-7500A-8513850/1300nm Multimode Dual Wavelength OTDR W/VFL and LTSFTE-7500A-13151310/1550nm Single Mode Dual Wavelength OTDR W/VFL and LTSFTE-7500A-QUAD 850/13001310/1550nm Quad Wavelength OTDR W/VFL and LTSFTE-SCASE-LG Soft Case for FTE-7500 and FTE-8000 SeriesCI1100Video Probe for FTE7500 and FTE-8000 SeriesFTE-7500A Specifications Wavelength 850, 1300, 1310, 1550, 1625nm ±20nm Dynamic Range 27/26dB MM, 36/35/35dB SM, Pulse Width 5 - 20,000 ns Units of Measurement km, kf, mi Event Dead zone1m Attenuation Dead Zone5m Resolution.125 - 32m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range1-64km MM , 1-240km SM Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) 1.024 - 2.048 Linearity ± .05 dB/dB Memory Capacity~500 Memory TypeInternal and Flash Drive Power Supply / ChargerUniversal 110-220V witn Interchangeable MainsBattery8hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.75” L x 4.5” W x 2.25” H (197mm L x 114mm W x 57mm H) Weight2 lbsCommunications portsUSB and USB Flash Drive PortsConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Windows/Telcordia SR4731 Software, Rubber Boot and Manual on Flash Drive Power MeterDetector TypeInGaAsConnector Type2.5mm Interchangeable+5 to -77dB (CATV - +25 to -57dB)Calibrated Wavelengths850,1300,1310,1490,1550,1625nmUnits of MeasurementdBm, dBResolution.01 dBPower MeasurementUncertainty±0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmAuto Test Range0 to -40dB CW Source Fiber Type Single mode, MultimodeWavelengths850, 1300, 1310, 1550, 1625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz Visible Light SourceEmitter TypeLaserWavelength650nm ±5nmLaser Safety ClassClass IIFDA21 CFR1040.10 &1040.11 IEC 825-1: 1993Connector Type2.5mm UniversalOutput Power1mW Max.

ATR附件基于光内反射原理而设计。从光源发出的红外光经过折射率大的晶体再投射到折射率小的试样表面上，当入射角大于临界角时，入射光线就会产生全反射。事实上红外光并不是全部被反射回来，而是穿透到试样表面内一定深度后再返回表面。在该过程中，试样在入射光频率区域内有选择吸收，反射光强度发生减弱，产生与透射吸收相类似的谱图，从而获得样品表层化学成份的结构信息。原理示意图

ATR附件基于光内反射原理而设计。从光源发出的红外光经过折射率大的晶体再投射到折射率小的试样表面上，当入射角大于临界角时，入射光线就会产生全反射。事实上红外光并不是全部被反射回来，而是穿透到试样表面内一定深度后再返回表面。在该过程中，试样在入射光频率区域内有选择吸收，反射光强度发生减弱，产生与透射吸收相类似的谱图，从而获得样品表层化学成份的结构信息。原理示意图

单点反射测量支架是一个探头支架，用于厚度达150mm的光学层和其它基底的反射测量。 这一探头支架适于固定直径达6.35mm的光学探头和其它取样设备，可以在一个不锈钢支柱上上下滑行，调节高度可达63.5mm。 反射台是电镀台面，表面刻有同心圆以确定直径，用于放置圆形样品。 规格 尺寸（基座）: 直径为152.4mm 尺寸（样品区）: 直径为101.6mm* 重量: 620 g 高度: 垂直可调高度63.5mm *指带有同心圆刻度的区域，用户也可利用整个基座的区域。

FTE1700 32/30dB OTDR 经济型光时域反射计The U.S. made FTE-1700 has all the features of the FTE-7000, but with the added feature of bluetooth operation. The FTE-1700 may be operated over Bluetooth with the free Android app.This Android OTDR is one of the most affordable OTDRs on the market today. This unit is equipped with Bluetooth for use with any compatible Android device operating 2.2 or newer operating system, having bluetooth capability. This unit is available in 1310/1550nm, 850/1300 dual wave, single wave or quad wavelength configurations. This OTDR comes standard with a video scope (for use with optional VIS300 video probe) and power meter. Operate the OTDR either from either the onboard keypad or use your Android phone or tablet. The Android application allows for more mobility, offers a more powerful file management system, Geo- tagging of files, easy file sharing as well as a display limited only by the size of your Android device. The FTE-1700 has a 32/30 dB dynamic range with a 2 meter dead zone. Testing is made simple and fast with the press of the Autotest button. Examine the trace using the straight forward zoom feature and A/B cursor selection button or quickly zero in on events with the powerful event selection feature. The FTE-1700 OTDR’s abundant dynamic range and a 2 meter dead zone, makes it ideal for links up to 240km as well as being perfect for short LAN links within the facility and FTTA/FTTH applications. Trace analysis and reporting is fast and easy with the Pass/Fail feature, onboard event table or the supplied Telcordia SR4731 software with multi-trace, macro bend and bi-directional capability. The OTDR has on board storage of 1000 traces with the ability to download traces directly to your computer via USB cable. If you use your android phone or tablet, storage is only limited by your removable drive or cloud storage capabilities. Features? Most Affordable OTDR on the Market? Free Fiber-Droid Application? Optional Video Probe ? Live Fiber Detection? Bluetooth Operation? Bi-directional Averaging? Macro Bend Analysis? Ultra Fast Trace Acquisition? One Short Dead Zone? Button Testing? Event Table with Pass/Fail Analysis? Trace Comparison with Trace Overlay? Easy Training with Onboard Help Screens? CertSoft Report Software Included? Onboard Memory for 1000 tracesOrdering InformationFTE-1700-8513850/1300nm Multimode Dual Wavelength OTDR Includes Video Scope with Probe and LTSFTE-1700-13151310/1550nm Single Mode Dual Wavelength OTDR Includes Video Scope with Probe and LTSFTE-1700-QUAD 850/13001310/1550nm Quad Wavelength OTDR Includes Video Scope with ProbeFTE-1700E-1315 1310/1550nm Single Mode Dual Wavelength Economy OTDR(Choice of one adapter for Economy OTDR)FTE-SCASE-LG Soft Case for FTE-7500. FTE-6000 and FTE-8000 SeriesVIS-300Video Probe for FTE-1700, FTE-7000A, FTE7500 and FTE-8000 Series***Video Probe and Soft Case are included with the purchase of an FTE1700 (excluding the FTE1700E)** OTDR Specification Wavelength 850, 1300, 1310, 1550nm ±20nm Dynamic Range 27/26dB MM, 32/30dB SM, Pulse Width20 - 10,000 ns Units of Measurementkm, kf, mi Event Dead zone2m Attenuation Dead Zone5m Resolution0.25 - 64m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range1-64km MM , 1-240km SM Typical Real-time Refresh Rate4 Hz Group Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dB Memory Capacity1000 traces Memory TypeInternal Power Supply / ChargerUniversal 110-220V witn Interchangeable MainsBattery 6hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.62” L x 3.88” W x 1.56” H (194mm L x 99mm W x 40mm H) Weight 1.6 lbsCommunications portsUSB and BluetoothConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, CertSoft Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAsConnector Type2.5mm InterchangeableDynamic Range+5 to -77dB (CATV - +25 to -57dB)Calibrated Wavelengths850,1300,1310,1490,1550,1625nmUnits of MeasurementdBm, dBResolution.01dBPower MeasurementUncertainty± 0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmAuto Test Range0 to -40dBCW Source Specifications Fiber Type Single mode, MultimodeWavelengths850, 1300, 1310, 1550, 1625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

FTE7500A-CWDM-12 OTDR高级光时域反射计The FTE7500A-CWDM-12 offers up to 12 CWDM Wavelengths in a Single OTDR. These OTDRs may be order with 8, 10 or even 12 CWDM wavelengths. Standard units include 1471-1611nm for 8 wavelengths and 1431-1611nm for 10 wavelengths or configure a 12 wavelength unit using the 1471-1611nm 8 wavelength unit and add 4 additional wavelengths of your choice. Test a fiber at 1, 2 or up to 12 wavelengths with the touch of just one button. The Fault Finder mode uses one button to scan a fiber under test, have the OTDR select the best parameters at the selected wavelength and displays event analysis. The onboard Broadband Power Meter is calibrated at up to 12 CWDM wavelengths. to match the OTDR configuration. The FTE7500A-CWDM may be used as a CW light source. Select any of the configured wavelengths as a CW light source for commissioning or for Loss test with the onboard Power Meter. The CertSoft Software Suite, project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image. Features? 35 dB Dynamic Range? Express Help System? CW & Fiber Identifier Light Source? Video Scope With Pass/Fail Grading Zones? Integrated Power Meter? Bidirectional Trace Analysis with Certsoft? Full Auto, Construction and Expert Modes? Live Fiber Detection? Onboard Memory of ~4000 traces? CertSoft Report Software with .sor Capability? Dual Trace Capability Ordering InfomationFTE-7500A-CWDM-121471-1611nm +4 Additional Wavelengths of Choice, CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-101431-1611nm 10 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-OE 1271-1411nm, 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-SCL1471-1611nm 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-SCASE-LGSoft Case for FTE7500, FTE600 and FTE8000 SeriesVIS-300Video Probe For FTE7000 and FTE7500-CWDM and FTE7500-DWDM SeriesFTE-7500A-CWDM Specifications Wavelength CWDM Wavelenghts (1271nm-1611nm) as Configured +/-3nm Dynamic Range35dB Pulse Width 5 - 20,000 ns Units of Measurement km, kf, mi Event Dead zone1m Attenuation Dead Zone4m Resolution.125 - 32m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range10.25-260km Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) 1.024 - 2.048 Linearity ± .05 dB/dB Memory Capacity~500 Memory TypeInternal and External USB Flash Drive Power Supply / ChargerInput 100-240VAC, 50-60Hz, 0.3A, Output 13.6V, 1.2ABattery8hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 40 CDimensions (w/out rubber boot )8.62” L x 4.25” W x 2.375” H (219mm L x 108mm W x 60mm H) Weight2 lbsCommunications portsUSB and USB Flash Drive PortsConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/interchangeable mains, Interchangeable FC/ST and SC Adapters for optical port and FC, ST, SC, 1.25mm and 2.5mm universal adapters for power meter port, Software, Manual on CD and Protective Rubber Boot Power MeterDetector TypeInGaAsConnector TypeInterchangeable - FC?ST/SC/1.25mm univ and 2.5mm univ. Measurement Range+5 to -77dB (CATV - +25 to -57dB)Calibrated WavelengthsAs configured with OTDR wavelengthsUnits of MeasurementdBm, dBResolution.01 dBPower MeasurementUncertainty±0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBm CW Source Fiber Type Single mode, MultimodeWavelengths(Light Source Wavelengths are Limited by the OTDR Configuration)Output Power0 dBm Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz Visible Light SourceEmitter TypeLaserWavelength650nm ±5nmLaser Safety ClassClass IIFDA21 CFR1040.10 &1040.11 IEC 825-1: 1993Connector Type2.5mm UniversalOutput Power1mW Max.

Stage-RTL-T型平台是一种新型采样系统，适用于分析如硅、金属、玻璃和塑料一类的材料。RTL-T与海洋光学的光谱仪和光源有多种组合方式，配合进行反射和传输测量 Stage-RTL-T包括一个附着在基座上的可调轨夹。有三个用螺丝固定在轨夹上的设备，包括一个带 UV-VIS校准镜头的光纤固定器；一个反射和传送的样品盒；一个光阱用来减少背射光和 环境光的影响。 STAGE-RTL-T型平台使用非常广泛：可以将探头放置在样品上或样品下（从下部测量时样品和探头要保持一个固定的距离）完成反射测量； 将光阱放置在适当的位置进行光反射测量；或使用两个光纤进行样品传输的测量。 STAGE-RTL-T型平台规格 尺寸(底座): 206.3 mm 尺寸 (样品区): 直径152.4 mm(样品架) 重: 4,500 g 高: 立杆可调至 400 mm

IR衰减全反射和漫反射附件的详细资料： 详情请联系吴小姐：15080317079 衰减全反射和漫反射附件满足您所有采样需要 通用衰减全反射 (UATR) 附件 适用于Spectrum 400/100/One/65 分光计 通用ATR是一款优秀的附件，可用于固体和液体的分析。UATR的压力臂通过让金刚石晶体与样品良好接触来产生高质量谱图。压力臂使指示器保证结果的高度可重复性。 特色和优势 Ø 自动识别&mdash &mdash 旦附件放置到样品仓中，通用ATR模块及其序列号和ATR晶体类型(1, 3, 或9反射)就能立即被识别出来，并且系统适应性检查会随即启动。仅限于Spectrum 400/100/One Ø 自动优化&mdash &mdash 根据顶板的不同自动优化光学器件。仅限于Spectrum 400/100/One Ø 零校正，零设置&mdash &mdash 旦Spectrum 100样品仓锁住，该附件即随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件一旦安装完毕就成为了设备的组成部分 Ø 标准情况下配备有带压力传感器的压力臂挥发物盖(仅限于9反射UATR) 金刚石/硒化 UATR 配备1反射 顶 板 和压力臂 L1250050 配备3反射 顶 板 和压力臂 L1250051 配备9反射 顶 板 和压力臂 L1250052 金刚石/KRS-5 UATR 配备1反射 顶 板 和压力臂 L1250053 Ge/Ge UATR 配备1反射 顶 板 和压力臂 L1250054 注意:UATR附件需.Spectrum v.6及以上版本支持 UATR附件用备用/替换件顶板和耗材 UATR &ndash 1反射 金刚石顶板&ndash ZnSe 1 L1250240UATR &ndash 3反射 金刚石顶板&ndash ZnSe 1 L1250241 UATR &ndash 9反射 金刚石顶板&ndash ZnSe 1 L1250242 UATR &ndash 1反射 金刚石顶板&ndash KRS-5 1 L1250046 UATR &ndash 1反射Ge/Ge顶板 1 L1250048 UATR 0.5mm套管 1 L1202049 UATR 6.0mm ATR套管 1 L1202050 UATR 锥形套管 1 L1201980 UATR 3.0mm样品定位板 1 L1202023 UATR 7.0mm样品定位板 1 L1202024 Miracle ATR附件 单反射ATR附件用来分析高吸收固体，半流体，和液体样品。小型圆形晶体是采样板构造的最大特点，它能实现对微量(5&mu L及以上)样品的可靠分析。 固体材料能够和晶体接触良好，从而保证了高质量、可重复的谱图。附件还配备有千分尺控制的压缩钳，挥发物品盖，清洁工具和一系列的晶体材料。 Miracle单反射ATR 金刚石适用于Spectrum RX/BX L1272239 ZNSE适用于Spectrum RX/BX L1272107 ZNSE适用于Spectrum 400/100/One/65 L1272126 GE适用于Spectrum 400/100/One/65 L1272127 ZNSE适用于Spectrum GX L1272103 GE适用于Spectrum GX L1272104 漫反射附件 是不透明样品和强散射样品测量的理想选择。该漫反射附件为药品、食品、肥皂粉末、煤炭、泥土、纸片、镀有涂层的表面、泡沫塑料和催化剂等不透明和强散射固体样品的分析提供了方便灵敏的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，漫反射附件及其序列号就能立即被识别出来 Ø 系统适应性检查&mdash &mdash 包括噪声，通量和污染情况的检查，当附件插入时或得到指令时，系统就会随即启动进行检查 Ø 自动优化&mdash &mdash 对于粉末、硅碳板或金刚石杵等的所有采样方法，样品位置都能被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作。 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 配备多功能样品支架，2个大容量样品杯和2个微量样品杯，25个金属镀层研磨垫，25个金属镀层带支架的研磨杵，和一瓶30g KBr粉末。 用于 Spectrum 400/100/One L1200351 漫反射附件耗材 大容量杯 1 L1201654 微量杯 1 L1201655 多功能样品支架 1 L1201865 金属镀层研磨垫 100 L1275106 金属镀层研磨杵 100 L1275105 硅碳磨研磨垫 100 L1271021 金刚石研磨杵 100 L1275102 水平ATR附件 PerkinElmer水平ATR (HATR)附件基于衰减全反射原理，能为各种常规透射技术难以检测的固体、液体和糊剂样品的分析提供快速可靠的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，HATR附件及其序列号就能立即被识别出来，并且系统适应性检查会随即启动 Ø 自动优化&mdash &mdash 无论是何种种类的晶体，光路都能够被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 Ø 标准情况下配备有带压力传感器的压力臂(仅限于平顶板型) 与配备ZnSe 45° 晶体、粉末压片机和挥发物盖的平顶板一起提供。 适用于 Spectrum 400/100/One L1200351 HATR附件配备有 ZnSe平顶板和压力臂 L1200311 HATR附件配备有 ZnSe槽型顶板 L1200312 HATR附件用备用/替换件顶板和耗材 HATR ZnSe 45° 平板 1 L1200313 HATR ZnSe 45° 槽形板 1 L1200314 HATR Ge 45° 平板 1 L1200333 HATR Ge 45° 槽形板 1 L1200334 HATR 压力臂套件 1 L1200321 粉末压片机 1 L1201944 挥发物盖 1 L1205436

IR衰减全反射和漫反射附件的详细资料： 详情请联系吴小姐：15080317079 衰减全反射和漫反射附件满足您所有采样需要 通用衰减全反射 (UATR) 附件 适用于Spectrum 400/100/One/65 分光计 通用ATR是一款优秀的附件，可用于固体和液体的分析。UATR的压力臂通过让金刚石晶体与样品良好接触来产生高质量谱图。压力臂使指示器保证结果的高度可重复性。 特色和优势 Ø 自动识别&mdash &mdash 旦附件放置到样品仓中，通用ATR模块及其序列号和ATR晶体类型(1, 3, 或9反射)就能立即被识别出来，并且系统适应性检查会随即启动。仅限于Spectrum 400/100/One Ø 自动优化&mdash &mdash 根据顶板的不同自动优化光学器件。仅限于Spectrum 400/100/One Ø 零校正，零设置&mdash &mdash 旦Spectrum 100样品仓锁住，该附件即随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件一旦安装完毕就成为了设备的组成部分 Ø 标准情况下配备有带压力传感器的压力臂挥发物盖(仅限于9反射UATR) 金刚石/硒化 UATR 配备1反射 顶 板 和压力臂 L1250050 配备3反射 顶 板 和压力臂 L1250051 配备9反射 顶 板 和压力臂 L1250052 金刚石/KRS-5 UATR 配备1反射 顶 板 和压力臂 L1250053 Ge/Ge UATR 配备1反射 顶 板 和压力臂 L1250054 注意:UATR附件需.Spectrum v.6及以上版本支持 UATR附件用备用/替换件顶板和耗材 UATR &ndash 1反射 金刚石顶板&ndash ZnSe 1 L1250240UATR &ndash 3反射 金刚石顶板&ndash ZnSe 1 L1250241 UATR &ndash 9反射 金刚石顶板&ndash ZnSe 1 L1250242 UATR &ndash 1反射 金刚石顶板&ndash KRS-5 1 L1250046 UATR &ndash 1反射Ge/Ge顶板 1 L1250048 UATR 0.5mm套管 1 L1202049 UATR 6.0mm ATR套管 1 L1202050 UATR 锥形套管 1 L1201980 UATR 3.0mm样品定位板 1 L1202023 UATR 7.0mm样品定位板 1 L1202024 Miracle ATR附件 单反射ATR附件用来分析高吸收固体，半流体，和液体样品。小型圆形晶体是采样板构造的最大特点，它能实现对微量(5&mu L及以上)样品的可靠分析。 固体材料能够和晶体接触良好，从而保证了高质量、可重复的谱图。附件还配备有千分尺控制的压缩钳，挥发物品盖，清洁工具和一系列的晶体材料。 Miracle单反射ATR 金刚石适用于Spectrum RX/BX L1272239 ZNSE适用于Spectrum RX/BX L1272107 ZNSE适用于Spectrum 400/100/One/65 L1272126 GE适用于Spectrum 400/100/One/65 L1272127 ZNSE适用于Spectrum GX L1272103 GE适用于Spectrum GX L1272104 漫反射附件 是不透明样品和强散射样品测量的理想选择。该漫反射附件为药品、食品、肥皂粉末、煤炭、泥土、纸片、镀有涂层的表面、泡沫塑料和催化剂等不透明和强散射固体样品的分析提供了方便灵敏的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，漫反射附件及其序列号就能立即被识别出来 Ø 系统适应性检查&mdash &mdash 包括噪声，通量和污染情况的检查，当附件插入时或得到指令时，系统就会随即启动进行检查 Ø 自动优化&mdash &mdash 对于粉末、硅碳板或金刚石杵等的所有采样方法，样品位置都能被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作。 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 配备多功能样品支架，2个大容量样品杯和2个微量样品杯，25个金属镀层研磨垫，25个金属镀层带支架的研磨杵，和一瓶30g KBr粉末。 用于 Spectrum 400/100/One L1200351 漫反射附件耗材 大容量杯 1 L1201654 微量杯 1 L1201655 多功能样品支架 1 L1201865 金属镀层研磨垫 100 L1275106 金属镀层研磨杵 100 L1275105 硅碳磨研磨垫 100 L1271021 金刚石研磨杵 100 L1275102 水平ATR附件 PerkinElmer水平ATR (HATR)附件基于衰减全反射原理，能为各种常规透射技术难以检测的固体、液体和糊剂样品的分析提供快速可靠的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，HATR附件及其序列号就能立即被识别出来，并且系统适应性检查会随即启动 Ø 自动优化&mdash &mdash 无论是何种种类的晶体，光路都能够被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 Ø 标准情况下配备有带压力传感器的压力臂(仅限于平顶板型) 与配备ZnSe 45° 晶体、粉末压片机和挥发物盖的平顶板一起提供。 适用于 Spectrum 400/100/One L1200351 HATR附件配备有 ZnSe平顶板和压力臂 L1200311 HATR附件配备有 ZnSe槽型顶板 L1200312 HATR附件用备用/替换件顶板和耗材 HATR ZnSe 45° 平板 1 L1200313 HATR ZnSe 45° 槽形板 1 L1200314 HATR Ge 45° 平板 1 L1200333 HATR Ge 45° 槽形板 1 L1200334 HATR 压力臂套件 1 L1200321 粉末压片机 1 L1201944 挥发物盖 1 L1205436

IR衰减全反射和漫反射附件的详细资料： 详情请联系吴小姐：15080317079 衰减全反射和漫反射附件满足您所有采样需要 通用衰减全反射 (UATR) 附件 适用于Spectrum 400/100/One/65 分光计 通用ATR是一款优秀的附件，可用于固体和液体的分析。UATR的压力臂通过让金刚石晶体与样品良好接触来产生高质量谱图。压力臂使指示器保证结果的高度可重复性。 特色和优势 Ø 自动识别&mdash &mdash 旦附件放置到样品仓中，通用ATR模块及其序列号和ATR晶体类型(1, 3, 或9反射)就能立即被识别出来，并且系统适应性检查会随即启动。仅限于Spectrum 400/100/One Ø 自动优化&mdash &mdash 根据顶板的不同自动优化光学器件。仅限于Spectrum 400/100/One Ø 零校正，零设置&mdash &mdash 旦Spectrum 100样品仓锁住，该附件即随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件一旦安装完毕就成为了设备的组成部分 Ø 标准情况下配备有带压力传感器的压力臂挥发物盖(仅限于9反射UATR) 金刚石/硒化 UATR 配备1反射 顶 板 和压力臂 L1250050 配备3反射 顶 板 和压力臂 L1250051 配备9反射 顶 板 和压力臂 L1250052 金刚石/KRS-5 UATR 配备1反射 顶 板 和压力臂 L1250053 Ge/Ge UATR 配备1反射 顶 板 和压力臂 L1250054 注意:UATR附件需.Spectrum v.6及以上版本支持 UATR附件用备用/替换件顶板和耗材 UATR &ndash 1反射 金刚石顶板&ndash ZnSe 1 L1250240UATR &ndash 3反射 金刚石顶板&ndash ZnSe 1 L1250241 UATR &ndash 9反射 金刚石顶板&ndash ZnSe 1 L1250242 UATR &ndash 1反射 金刚石顶板&ndash KRS-5 1 L1250046 UATR &ndash 1反射Ge/Ge顶板 1 L1250048 UATR 0.5mm套管 1 L1202049 UATR 6.0mm ATR套管 1 L1202050 UATR 锥形套管 1 L1201980 UATR 3.0mm样品定位板 1 L1202023 UATR 7.0mm样品定位板 1 L1202024 Miracle ATR附件 单反射ATR附件用来分析高吸收固体，半流体，和液体样品。小型圆形晶体是采样板构造的最大特点，它能实现对微量(5&mu L及以上)样品的可靠分析。 固体材料能够和晶体接触良好，从而保证了高质量、可重复的谱图。附件还配备有千分尺控制的压缩钳，挥发物品盖，清洁工具和一系列的晶体材料。 Miracle单反射ATR 金刚石适用于Spectrum RX/BX L1272239 ZNSE适用于Spectrum RX/BX L1272107 ZNSE适用于Spectrum 400/100/One/65 L1272126 GE适用于Spectrum 400/100/One/65 L1272127 ZNSE适用于Spectrum GX L1272103 GE适用于Spectrum GX L1272104 漫反射附件 是不透明样品和强散射样品测量的理想选择。该漫反射附件为药品、食品、肥皂粉末、煤炭、泥土、纸片、镀有涂层的表面、泡沫塑料和催化剂等不透明和强散射固体样品的分析提供了方便灵敏的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，漫反射附件及其序列号就能立即被识别出来 Ø 系统适应性检查&mdash &mdash 包括噪声，通量和污染情况的检查，当附件插入时或得到指令时，系统就会随即启动进行检查 Ø 自动优化&mdash &mdash 对于粉末、硅碳板或金刚石杵等的所有采样方法，样品位置都能被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作。 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 配备多功能样品支架，2个大容量样品杯和2个微量样品杯，25个金属镀层研磨垫，25个金属镀层带支架的研磨杵，和一瓶30g KBr粉末。 用于 Spectrum 400/100/One L1200351 漫反射附件耗材 大容量杯 1 L1201654 微量杯 1 L1201655 多功能样品支架 1 L1201865 金属镀层研磨垫 100 L1275106 金属镀层研磨杵 100 L1275105 硅碳磨研磨垫 100 L1271021 金刚石研磨杵 100 L1275102 水平ATR附件 PerkinElmer水平ATR (HATR)附件基于衰减全反射原理，能为各种常规透射技术难以检测的固体、液体和糊剂样品的分析提供快速可靠的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，HATR附件及其序列号就能立即被识别出来，并且系统适应性检查会随即启动 Ø 自动优化&mdash &mdash 无论是何种种类的晶体，光路都能够被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 Ø 标准情况下配备有带压力传感器的压力臂(仅限于平顶板型) 与配备ZnSe 45° 晶体、粉末压片机和挥发物盖的平顶板一起提供。 适用于 Spectrum 400/100/One L1200351 HATR附件配备有 ZnSe平顶板和压力臂 L1200311 HATR附件配备有 ZnSe槽型顶板 L1200312 HATR附件用备用/替换件顶板和耗材 HATR ZnSe 45° 平板 1 L1200313 HATR ZnSe 45° 槽形板 1 L1200314 HATR Ge 45° 平板 1 L1200333 HATR Ge 45° 槽形板 1 L1200334 HATR 压力臂套件 1 L1200321 粉末压片机 1 L1201944 挥发物盖 1 L1205436

IR衰减全反射和漫反射附件的详细资料： 详情请联系吴小姐：15080317079 衰减全反射和漫反射附件满足您所有采样需要 通用衰减全反射 (UATR) 附件 适用于Spectrum 400/100/One/65 分光计 通用ATR是一款优秀的附件，可用于固体和液体的分析。UATR的压力臂通过让金刚石晶体与样品良好接触来产生高质量谱图。压力臂使指示器保证结果的高度可重复性。 特色和优势 Ø 自动识别&mdash &mdash 旦附件放置到样品仓中，通用ATR模块及其序列号和ATR晶体类型(1, 3, 或9反射)就能立即被识别出来，并且系统适应性检查会随即启动。仅限于Spectrum 400/100/One Ø 自动优化&mdash &mdash 根据顶板的不同自动优化光学器件。仅限于Spectrum 400/100/One Ø 零校正，零设置&mdash &mdash 旦Spectrum 100样品仓锁住，该附件即随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件一旦安装完毕就成为了设备的组成部分 Ø 标准情况下配备有带压力传感器的压力臂挥发物盖(仅限于9反射UATR) 金刚石/硒化 UATR 配备1反射 顶 板 和压力臂 L1250050 配备3反射 顶 板 和压力臂 L1250051 配备9反射 顶 板 和压力臂 L1250052 金刚石/KRS-5 UATR 配备1反射 顶 板 和压力臂 L1250053 Ge/Ge UATR 配备1反射 顶 板 和压力臂 L1250054 注意:UATR附件需.Spectrum v.6及以上版本支持 UATR附件用备用/替换件顶板和耗材 UATR &ndash 1反射 金刚石顶板&ndash ZnSe 1 L1250240UATR &ndash 3反射 金刚石顶板&ndash ZnSe 1 L1250241 UATR &ndash 9反射 金刚石顶板&ndash ZnSe 1 L1250242 UATR &ndash 1反射 金刚石顶板&ndash KRS-5 1 L1250046 UATR &ndash 1反射Ge/Ge顶板 1 L1250048 UATR 0.5mm套管 1 L1202049 UATR 6.0mm ATR套管 1 L1202050 UATR 锥形套管 1 L1201980 UATR 3.0mm样品定位板 1 L1202023 UATR 7.0mm样品定位板 1 L1202024 Miracle ATR附件 单反射ATR附件用来分析高吸收固体，半流体，和液体样品。小型圆形晶体是采样板构造的最大特点，它能实现对微量(5&mu L及以上)样品的可靠分析。 固体材料能够和晶体接触良好，从而保证了高质量、可重复的谱图。附件还配备有千分尺控制的压缩钳，挥发物品盖，清洁工具和一系列的晶体材料。 Miracle单反射ATR 金刚石适用于Spectrum RX/BX L1272239 ZNSE适用于Spectrum RX/BX L1272107 ZNSE适用于Spectrum 400/100/One/65 L1272126 GE适用于Spectrum 400/100/One/65 L1272127 ZNSE适用于Spectrum GX L1272103 GE适用于Spectrum GX L1272104 漫反射附件 是不透明样品和强散射样品测量的理想选择。该漫反射附件为药品、食品、肥皂粉末、煤炭、泥土、纸片、镀有涂层的表面、泡沫塑料和催化剂等不透明和强散射固体样品的分析提供了方便灵敏的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，漫反射附件及其序列号就能立即被识别出来 Ø 系统适应性检查&mdash &mdash 包括噪声，通量和污染情况的检查，当附件插入时或得到指令时，系统就会随即启动进行检查 Ø 自动优化&mdash &mdash 对于粉末、硅碳板或金刚石杵等的所有采样方法，样品位置都能被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作。 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 配备多功能样品支架，2个大容量样品杯和2个微量样品杯，25个金属镀层研磨垫，25个金属镀层带支架的研磨杵，和一瓶30g KBr粉末。 用于 Spectrum 400/100/One L1200351 漫反射附件耗材 大容量杯 1 L1201654 微量杯 1 L1201655 多功能样品支架 1 L1201865 金属镀层研磨垫 100 L1275106 金属镀层研磨杵 100 L1275105 硅碳磨研磨垫 100 L1271021 金刚石研磨杵 100 L1275102 水平ATR附件 PerkinElmer水平ATR (HATR)附件基于衰减全反射原理，能为各种常规透射技术难以检测的固体、液体和糊剂样品的分析提供快速可靠的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，HATR附件及其序列号就能立即被识别出来，并且系统适应性检查会随即启动 Ø 自动优化&mdash &mdash 无论是何种种类的晶体，光路都能够被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 Ø 标准情况下配备有带压力传感器的压力臂(仅限于平顶板型) 与配备ZnSe 45° 晶体、粉末压片机和挥发物盖的平顶板一起提供。 适用于 Spectrum 400/100/One L1200351 HATR附件配备有 ZnSe平顶板和压力臂 L1200311 HATR附件配备有 ZnSe槽型顶板 L1200312 HATR附件用备用/替换件顶板和耗材 HATR ZnSe 45° 平板 1 L1200313 HATR ZnSe 45° 槽形板 1 L1200314 HATR Ge 45° 平板 1 L1200333 HATR Ge 45° 槽形板 1 L1200334 HATR 压力臂套件 1 L1200321 粉末压片机 1 L1201944 挥发物盖 1 L1205436

反射模块可以测量样品的反射系数。配合根据干涉现象原理设计的反射模块，LabPro Plus软件的厚度模式能测量微米级薄膜的厚度。

SA-Stage-C 单点反射支架SA-Stage-C单点反射测量支架是一个光纤探头支架，用于厚度达150mm的光学层和其它基底的反射测量。这一反射光纤探头支架适于固定直径达6.35mm的反射光纤探头和其它取样设备，可以在一个不锈钢支柱上上下滑行，调节高度可达80mm。规格 SA-Stage-C尺寸：Φ 150mm×厚10mm高度：垂直可调高度80mm材质：铝合金表面处理：亚光发黑适配产品： QR系列反射光纤用途：专为反射光纤测量而设计，能有效固定光纤探头，防止因抖动等人为因素影响检测效果。

天津能谱科技自主研发的ATRS-01万能衰减全反射附件样品无需前处理，简化了样品的制作过程，被广泛应用于各种固体和液体样品测试，如塑料、纤维、橡胶、涂料、粘合剂等高分子材料制品的表面成份分析。ATRS-01主要采用ZnSe晶体，具有硬度好透过率高可以满足各种常规样品的测试，同时可配合我公司生产iCAN 9傅立叶红外光谱仪进行使用，更方便快捷。衰减全反射技术 (ATR)是目前比较广泛的采样技术。ATR可以进行原位定性或定量测试，样品基本不需要制备，直接将样品放在ATR晶体上就可以进行测试。因此可以大大加快测试速度、提高测试效率。　　ATR的工作原理是红外光束进入折光指数较高的晶体中红外光束从晶体表面反射回来，但同时在样品中有一个衰减波区域，这部分红外光束有部分被样品吸收而反射出来到达检测器以获得样品的红外光谱的信息。全反射现象不完全是在两种介质的界面上进行，部分光束要进入到样品介质一段距离后才反射回来，透入到样品介质的光束，在样品的透光区，反射光能几乎等于入射光能，而在样品的吸收区，则有部分入射光被吸收。“全反射"是衰减的，其衰减程度与样品的吸收系数的大小有关。因此扫描整个中红外区即可得到一个非常类似于透光光谱的红外光谱，一般称为ATR光谱。衰减全反射中谱带的强度除了取决于样品本身的吸收性质以外，还和光线在样品表面反射的次数以及穿透样品的深度有关，一般来说，穿透越深，吸收越强。

FC-TDS 太赫兹光时域系统德国BATOP公司在TH系统的产品性价比非常高，款式也很多。 其主要产品有: TDS10XX、FC TDS和TDS（1060nm飞秒激光器）及其成像系统。 FC TDS是BATOP公司推出的全光纤式THz-TDS系统。 主要特点：脉冲THz波最高达1.5THz简单方便全光纤结构可透射也可反射THz波可聚焦也可准直包含软件 性能参数：频率范围0.05～1.5THz动态范围50dB扫描范围500ps(3GHz频率分辨)THz直径12mm（准直结构）THz光斑大小1.5mm@1THz（聚焦结构）快扫描周期0.5s慢扫描周期8分钟偏置电压10V调制频率1～30KHz（默认10KHz）电源电压115～230V 激光要求：波长1μm，1.56μm脉冲宽度＜200fs（越短越好）重复频率～100MHz平均功率≥60mW 软件截屏：

SA-Stage-RT透反射测量支架 关键词：反射/透射/漫反射光谱 1 产品简介SA-Stage-RT透反射测量支架是一个新型的，能满足透射和反射测量的采样支架。适用于分析如硅、金属、玻璃和塑料等一类的材料。SA-Stage-RT与如海光电的光纤光谱仪、光源、积分球有多种组合方式。可以同时满足客户对于反射光谱测量和透射光谱测量的需求。 2 产品功能示意图3 产品参数产品参数SA-Stage-RT底座尺寸φ150mm样品区域尺寸宽度＜100mm样品通光口径（透射测量）直径10mm调节高度~150mm（其他长度可以定制）准直镜波长范围200~2500nm台体材料阳极氧化铝反射积分球用于连接38毫米积分球（另外选配）用途 专为透反射光纤测量而设计，能有效固定光纤，防止因抖动等人为因素影响检测效果

FTE7000A-EXT 39dB OTDR光时域反射计专业触屏The FTE7000A-EXT Optical Time Domain Reflectometer is designed for Metro or PON applications. With 39dB at 1310nm and 1550nm there is abundant range to meet your requirements. Add the 39dB 1625nm active port to perform liver fiber test in your PON networks. The FTE7000A series is a simple to operate touch screen unit with a bright color display. As with our other FTE7000A units, it has an IEC61300-3-35 method “B” video inspection system for use with the optional VIS300 video probe. The FTE7000A-EXT and FTE7000A-PON units have our rechargeable lithium Ion battery pack that supports up to 10 hours of operation with a quick 2 hour recharge cycle. This unit includes all the features expected in today’s hand held OTDR and more bright color touch screen, project management, file storage, Fib-R-Map schematic event analysis, pass/fail threshold settings and onboard context sensitive Express Help system to keep the learning curve shor and simple.This OTDR may also be operated with our Andriod app which is a real time application for your compatible android tablet or phone. The FTE7000A weighs less then 2.0 pounds and with a hardened water resistant enclosure in a sturdy rubber boot, this OTDR is great for all working conditions. You can print professional reports that include Fib-R-Map schematic analysis and loss tests set measurements with the included “CertSoft” certification software suite. Features? 39 dB Dynamic Range ? 10 Hour Battery Life w/2 Hour Quick recharge ? Auto-Grade Fault Finder? Express Help System? Bluetooth Operation with Android Devices? Video Scope With Pass/Fail Grading Map? Fib-R-Map Event Analyzer? Macro Bend and Bidirectional Analysis ? Full Auto, Construction and Expert Modes ? Instant On, Immediate Scan ? Live Fiber Detection? Onboard Memory of ~4000 traces? CW / Fiber Identifier Light Source? CertSoft Report Software with .sor Capability ? Real Time System ORLOrdering Information FTE-7000A-EXT 1310/1550 nm SM Dual Wavelength OTDR with Video Scope/Probe and LTS FTE-7000A-PON 1310/1550nm with 1625 Acitve, PON OTDR with Video Scope/Probe and LTSVIS300Video ProbeFTE7000A SpecificationsWavelength1310, 1550 and 1625 ±20nmDynamic Range39/39/38dBPulse Width 5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone 4mData Pointsup to 120,000Resolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution)Full Scale Distance Range0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048Linearity± .1 dB/dBMemory Capacity~1000Memory TypeInternal Power Supply / ChargerUniversalBattery Type/OperationLi-ion /10 hr typ.Storage Temperature-20 to 60 C Operating Temperature Range-10 to 40 CDimensions (w/rubber boot )8.75” L x 4.25” W x 2.125” H (222mm L x 108mm W x 554m H)Weight1.7 lbs (0.8 kg)Communications portsUSB and BluetoothOTDR Connector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable OTDR Adapters, FC/ST and SC.Interchangable Power Meter Adapters, FC/ST/SC/1.25mm univ and 2.5mm univ., Android Application, Windows Compatible Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAs Connector TypeInterchangable Dynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths850,1300,1310,1490,1550,1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of MeasurementdBm, dB Resolution.01 dBLight Source SpecificationsFiber TypeSingle mode Wavelengths1310, 1550 and 625 nm ±20nm or (As Ordered with OTDR)Output Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 Regulation Modulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

FTE7000A-CWDM OTDR粗波分复用光时域反射计The FTE7000A Optical Time Domain Reflectometer is designed for your CWDM networks with 4 CWDM lasers per unit. These units have 36dB dynamic range to meet your CWDM testing requirements. The FTE7000A series is a simple to operate touch screen unit with intuitive operation. As with our other FTE7000A units, it has an IEC61300-3-35 method “B” video inspection system for use with the optional VIS300 video probe. The FTE7000A-CWDM units have our rechargeable lithium Ion battery pack that supports up to 10 hours of operation with a quick 2 hour recharge cycle. This unit includes all the features expected in today’s hand held OTDR and more bright color touch screen, project management, file storage, Fib-R-Map schematic event analysis, pass/fail threshold settings and onboard context sensitive Express Help system to keep the learning curve short and simple. This OTDR may also be operated with our Android app which is a real time application for your compatible Android tablet or phone. The FTE7000A weighs less then 2.0 pounds and with a hardened water resistant enclosure in a sturdy rubber boot, this OTDR is great for all working conditions. You can print professional reports that include Fib-R-Map schematic analysis and loss tests set measurements with the included “CertSoft” certification software suite. Features? 36 dB Dynamic Range ? 10 Hour Battery Life w/2 Hour Quick recharge ? Auto-Grade Fault Finder? Express Help System? Bluetooth Operation with Android Devices? Video Scope With Pass/Fail Grading Map? Fib-R-Map Event Analyzer? Full Auto, Construction and Expert Modes ? Instant On, Immediate Scan ? Live Fiber Detection? Onboard Memory of ~4000 traces? CW / Fiber Identifier Light Source ? CertSoft Report Software with .sor Capability ? Real Time System ORLOrdering Information FTE-7000A-LR 1471/1491/1511/1531nm SM 36dB Dual Wavelength OTDR, Video Scope with Probe and LTS FTE-7000A-HR 1551/1571/1591/1611nm with 1625 Acitve, 39dB PON OTDR, Video Scope with Probe and LTSVIS300Video ProbeFTE7000A SpecificationsWavelength1471/1491/1511/1531 or 1551/1571/1591/1611nm +/-3nmDynamic Range 36dBPulse Width5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone4mResolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dBMemory Capacity~4000Memory TypeInternal Power Supply / ChargerUniversalBattery Type/OperationLi-ion /10 hr typ.Storage Temperature-20 to 60 C Operating Temperature Range-10 to 40 CDimensions (w/rubber boot )8.75” L x 4.25” W x 2.125” H (222mm L x 108mm W x 554m H)Weight1.7 lbs (0.8 kg) Communications portsUSB and BluetoothOTDR Connector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable OTDR Adapters, FC/ST and SC.Interchangable Power Meter Adapters, FC/ST/SC/1.25mm univ and 2.5mm univ., Android Application, Windows Compatible Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAsConnector TypeInterchangable - 1.25mm and 2.5mm univ, FC, ST, and SC includedDynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths850, 1300, 1310, 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611, and 1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of Measurement dBm, dBResolution.01 dBLight Source SpecificationsFiber Type Single modeWavelengthsAs Ordered with OTDROutput Power0 dBm Laser Safety Classification Class I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

太赫兹时域光谱仪筱晓光子供应太赫兹时域光谱仪(THz time-domain spectrometer)，光谱范围0.1-2.5THz，分辨率2GHz。该系列太赫兹时域光谱仪包括：飞秒激光器、太赫兹发生器、太赫兹探测器、延迟线、电子元件、操作软件。ModelFiber coupledTHz time-domain spectrometerTHz time-domain spectrometerApplicationtransmission and reflection measurementstransmission measurementMain parametersspectral range0.1 - 2.5THz0.1 - 2.5THzspectral resolution2GHz2GHzS/N-ratio at 0.4 THz10001000minimum scan time0.5s0.5sTHz beam diameter12mm12mmComponentslaser excitationfemtosecond fiber laser with 1060nm wavelengthfemtosecond fiber laser with 1060nm wavelengthTHz emitter modulefiber-coupled PCA with THz lensPCA-40-05-10-1060-c-femitter antenna with THz lensPCA-40-05-10-1060-a-lTHz detector modulefiber-coupled PCA with THz lensPCA-44-06-10-1060-c-fdetector antenna with THz lensPCA-44-06-10-1060-a-ldelay linedelay line with 1ns time delaydelay line with 1ns time delayelectronic componentspulse generator + lock-in detectionpulse generator + lock-in detectionsoftwareLaptop with spectrometer software T3DSLaptop with spectrometer software T3DSotherssignal amplifier, DAQ-Boardsignal amplifier, DAQ deviceOptions sample holdersubstrate holder with manual XY-movementof 50 mmsubstrate holder with manual XY-movementof 50 mmlensPTFE-lens including mount and postaspheri silicn substrate lenses, PTFE-lens

透射反射探头是最新的单程透射探头和双程透射反射光纤探头，与任何光谱仪和光度计兼容使用，透射反射探头用于工业和实验室的反应监测。透射反射探头功能应用 可以在从紫外到中红外光谱范围内使用， 用于液体中的远距离透射光谱。灵活强大，可应用在恶劣环境下的工业应用，如反应监测，PAT，结晶生成和筛选， 用于生物制药分析和生物燃料的开发和生产。

FTE7000A 36/35dB Advanced OTDR光时域反射计触屏The FTE-7000A Optical Time Domain Reflectometer performs a wide variety of functions as well as being a fast, simple to use OTDR. Its instant on feature, ease of use, rugged housing and affordable price make this the best day to day unit on the market. This unit includes an integrated Video Scope with pass/fail grading map, AutoTest /AutoWave Power Meter and CW/Fiber Identifier Light Source. It is available in 850/1300nm dual multi mode, 1310/1550nm dual singlemode, triple wave and 850/1300/1310/1550nm quad wavelength versions. The FTE-7000A has a 36dB dynamic range and a 1 meter dead zone. These specifications, and a full set of operational modes, such as one button fault finder, construction, real time and full manual mode, make it perfect for most testing and troubleshooting requirements, in LAN, MAN, or WAN Applications. This unit includes all the features expected in today’s hand held OTDR and more bright 4” color touch screen, file storage, Fib-R-Map schematic event analysis, pass/fail threshold setting and onboard context sensitive help to keep the learning curve as short as possible. This OTDR also operates with our Android application allowing operation via compatible Android devices.The FTE-7000A weighs in at less then 2.0 pounds and with a hardened water resistant enclosure, this OTDR is great for all working conditions. The rubber boot with bail adds protection and provides the ideal angle for viewing the display while operating on a work bench. Print professional reports that can include loss tests set measurements and connector end face images with the included “CertSoft” certification software suite. Features? Instant On, Immediate Scan? Touch Screen, Keyboard or Tablet Control? Storable Project Management w/Parameter Setup Screen? CW & Fiber Identifier Light Source? Bluetooth Android Tablet Operation? 36 dB Dynamic Range W/1 meter Dead Zone? Video Scope With Pass/Fail Grading Map? CertSoft Report Software with .sor Capability? Auto-Wavelength Power Meter? Bi-Directional Trace Analysis? Fib-R-Map Event Analyzer? SM, MM, Triple and Quad Units Available? Full Auto, Construction and Expert Modes? Live Fiber & Macro Bend Detection? Onboard Memory of ~1000 tracesOrdering InformationFTE-7000A-8513850/1300nm Multimode Dual Wavelength OTDR W/Video Scope/Probe and LTS. FTE-7000A-13151310/1550nm Single Mode Dual Wavelength OTDR W/Video Scope/Probe and LTS. FTE-7000A-QUAD 850/13001310/1550nm Quad Wavelength OTDR W/Video Scope and ProbeVIS300Video ProbeFTE7000A SpecificationsWavelength850, 1300, 1310, 1490,1550 and 1625 ±20nmDynamic Range27/26dB MM, 36/35/35/35dB SM,Pulse Width 5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone4mData Pointsup to 120,000Resolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range0.25-64km MM , 0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dBMemory Capacity~1000Memory TypeInternal Power Supply / ChargerUniversalBattery6hrStorage Temperature-20 to 60 C Operating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.62” L x 3.88” W x 1.56” H (194mm L x 99mm W x 40mm H)Weight1.7 lbs (0.8 kg) Communications portsUSB and BluetoothConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Android Application, Windows Compatible Software, Rubber Boot and Manual on CD Connector Type2.5mm InterchangeableDynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths Power Meter SpecificationsDetector TypeInGaAs 850,1300,1310,1490,1550,1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of MeasurementdBm, dB Resolution.01 dBLight Source SpecificationsFiber TypeSingle mode, Multimode Wavelengths850,1300,1310,1490,1550 and 625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 Regulation Modulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

单次反射ATR附件是一个高价值低价格预准直矫正的单次衰减全反射附件，与较为高价的单次反射附件相比，该单次反射ATR附件的灵敏度足够定量和定性分析。单次衰减全反射附件特点采用独特的45度ZnSe内部反射元件结合两个镜片用于光束导入到样品中并返回到仪器探测器中。这种设计最大可能地减少能量损失，透过的光能量可达百分之八十五。单次反射ATR附件还具有其它很多特色，它非常方便地从安装机构上装卸、清洗和更换ATR晶体尽管这些安装架都有顶板。这种方便性就可以使得其与其他ATR晶体互换而不需要购买完整的顶盖板.单次反射ATR附件可选FTIR光谱仪反射组件 （PartNo. #9000 ）单次衰减全反射附件该反射组件包括镜ATR附件、镜面反射和漫反射所有组件, 用于FTIR光谱仪的反射配件.组成如下:货号1075水平ATR系统配备45度ZnSe顶板,顶板夹,挥发物盖子和粉末压片.货号6000高性能漫反射系统带有大小品杯、KBr粉末、样品漏洞、玛瑙砂浆/碓、骆驼毛画笔等.货号7200 30度镜面反射系统.组合型HATR Part No #9110 单次衰减全反射附件组合化学已经成为制药,生物科技,高分子科学和有机合成的必备技术. 傅立叶变换红外光谱仪FTIR由于可以给出固态反应衬底的结构性信息而成为分析过程的重要工具. 我们推出的MIRacle 组合型水平单次反射ATR附件可以让用户免于样品准备的繁琐而在一秒钟之内获得结果. 单次衰减全反射附件提供了一个1.6mm的样品接口，配备了专门设计的组合秘诀珠，冠和别针专门装备的组合珠冠和别针.

一种可以改善您的分析应用的并可扩展的漫反射附件。 Selector 漫反射附件采用优化的偏轴光路，可以选择性地收集漫反射信号，而且漫反射信号最大化，而镜反射信号最小化。 为了便于样品研究，提供各种不同的样品杯，包括一个直径为11mm的样品杯、一个直径为4mm的微量样品杯以及一个斜杯。 如果需要，可以使用斜杯来收集所有的信号（包括漫反射和镜反射信号）。 另外，还有直径为12mm的摩擦垫，样品与摩擦垫摩擦，样品就分散在摩擦垫上，然后将摩擦垫放在样品架上，并放在Selector漫反射附件采样区域。 Selector根据光谱仪光束方向的不同，有不同光束方向相匹配的设计，并安装在相应的底板上。明确了要配套的光谱仪，Selector底板会随Selector漫反射附件一起提供。 The Environmental Chamber原位样池则使Selector漫反射部件得到更进一步的扩展。 特 点 具有漫反射和全反射功能 最小的校准工作量 简单的样品处理 备有大量杯、微量杯及斜杯 Diabraze摩擦垫上样 应 用 粉末样品 难处理的固体样品 可分散到KBr中的液体样品 适合光谱仪品牌型号 Analect FX6200, RFX40/65 Biorad FTS7,40,60,65,100,135,155,165,175,185,Excalibur Bomem M100 series (110,120) Bomem MB100 series (155,157) Bruker IFS25, 45, 55, 48, 66, 85, 88, Vector 22 Bruker IFS113 Jasco (All Jasco models) Jeol (All Jeol models) Mattson Alpha, Polaris, Cygnus, Sirius Mattson Galaxy Series 1000, 1020 (As Unicam Analytical (Philips) 9600) Mattson Galaxy Series 2000, 3000, 4000, 5000, 6000, 7000, Genesis Series, RS, Infinity Mattson 8000(Old) (3&rdquo beam height) Mattson 8000(New) (3.5&rdquo beam height) Midac (All Midac models) Nicolet 500, 700, 710, 740, 800, 5PC, 5SXC, Magna, Protege, Avatar, Nexus Nicolet 6000, 60DX, 60SX, 60SXB, 170SX Nicolet 205 Nicolet 5DX, 5SX, 1MX, 5MX,10DX Nicolet Impact 400 Perkin Elmer PE1700, PE1800 Perkin Elmer PE1700 with Shuttle Perkin Elmer PE2000, Spectrum 2000, GX Perkin Elmer PE2000, Spectrum 2000, GX Perkin Elmer PE1600 External Bench Perkin Elmer PE Spectrum One Shimadzu 8000, 8100, 8200, 8300, 8400, 8500, Prestige 21 Unicam Analytical (Philips) 9600 (As Mattson 1000 series) Unicam Analytical (Philips) 9800 (As Nicolet 500 series etc) Any Other Spectrometers 详细资料请联系我公司！

极端环境衰减全反射附件是全球唯一的为极端环境使用而设计制造的ATR附件，它可以耐受250摄氏度的高温和800帕斯卡高压的测量环境并兼具方便更换清洗ATR晶体的功能。极端环境衰减全反射附件的特点让广大用户随意更换ATR晶体而不必购买安装支架。极端环境衰减全反射附件特点采用独一无二的45度ZnSe单内反射元件，与另外两个光学镜片底座组合而用，用于光束进入样品和返回仪器探测器，ATR附件这种设计最大程度地减少光束能量损失，平均透过率可达百分之八十五以上。ATR附件采用了Kalrez垫片密封，从根本上消除了环氧树脂密封带来的问题。垫片不会与样品发生任何反应，从而避免了光谱曲线出现假峰或能量消退等问题。采用双控制器配置，方便抽样的自主管理和监测。可选方案：1.不带加热和加压功能的液体流动盒（使用平面顶板或液体流经）；2.加热范围为0-200摄氏度的液体盒；3.非加热液体流动盒；4.Ge或ZnS晶体用于衰减全反射,ATR附件,衰减全反射附件。极端环境衰减全反射附件可选FTIR光谱仪反射组件（PartNo. #9000 ）ATR附件 该反射组件包括镜ATR附件、镜面反射和漫反射所有附件, 用于FTIR光谱仪的反射配件.组成如下:货号1075水平ATR附件配备45度ZnSe顶板,顶板夹,挥发物盖子和粉末压片.货号6000高性能漫反射系统带有大小品杯、KBr粉末、样品漏洞、玛瑙砂浆/碓、骆驼毛画笔等.货号7200 30度镜面反射系统. 组合型HATR Part No #9110 衰减全反射附件组合化学已经成为制药,生物科技,高分子科学和有机合成的必备技术. 傅立叶变换红外光谱仪FTIR由于可以给出固态反应衬底的结构性信息而成为分析过程的重要工具.我们推出的MIRacle 组合型水平ATR附件可以让用户免于样品准备的繁琐而在一秒钟之内获得结果. 衰减全反射附件提供了一个1.6mm的样品接口，配备了专门设计的组合秘诀珠，冠和别针专门装备的组合珠冠和别针.

自动漫反射附件专业为漫反射研究而研发设计。配备专业的自动化软件，融合了多操作头旋转样品盘，自动漫反射附件可以提交多达60个样品而实现单样品或多样品中断和背景更新。自动漫反射附件特点非常灵活而且具有直观的用户界面。多操作头能够分别把不同样品载入到系统中，自动漫反射附件还拥有旋转样品盘大大方便多个使用者使用。用户可以方便地选择样品位置而且可以独立地、随机地、同时地编程控制。配备的软件是系统的一部分用于控制硬件的操作并采集数据。该软件在微软Windows操作系统下工作非常顺利而且非常容易地与FTIR软件包连接使用。This accessory was developed in response to demanding diffuse reflectance applications. The automated software accompanying the accessory, incorporates multi-operator sample submission for up to 60 samples with single or multiple sample interrupt and background update. The system is extremely flexible and user interface intuitive. Multiple operators may independently log samples onto the system. The multi-subscriber operation is facilitated through the use of a segmented sample tray. The operator conveniently selects the sample positions which can be programmed independently, simultaneously or randomly. The software is integrated with the accessory and the instrument to control motion and data acquisition. The software smoothly operates in the Microsoft Windows environment and can be easily linked to FTIR instrument software packages. An impressive means to increase lab productivity. The package includes the programmable control unit and software, a 60 position sample mounting tray, 60 sample cups and sample preparation components. 漫反射样品盘,漫反射附件,样品盘,旋转样品盘,自动漫反射,样品盘价格,漫反射样品盘价格可选:自动漫反射附件组成货号1075水平ATR系统配备45度ZnSe顶板,顶板夹,挥发物盖子和粉末压片.货号6000漫反射附件带有大小品杯、KBr粉末、样品漏洞、玛瑙砂浆/碓、骆驼毛画笔等.货号7200 30度镜面反射系统组合型HATR Part No #9110组合化学已经成为制药,生物科技,高分子科学和有机合成的必备技术. 傅立叶变换红外光谱仪FTIR由于可以给出固态反应衬底的结构性信息而成为分析过程的重要工具.我们推出的MIRacle 组合型水平ATR可以让用户免于样品准备的繁琐而在一秒钟之内获得结果. 漫反射附件和旋转样品盘提供了一个1.6mm的样品接口，配备了专门设计的组合秘诀珠，冠和别针专门装备的组合珠冠和别针.

高斯反射镜是一种可变反射率反射镜,也是一种梯度反射率镜,Gaussian mirror, 这种高斯反射镜可以有效改善激光光束质量。高斯反射镜和变反射率镜的反射率是位置的函数，镜片反射率随着镜片上位置不同而不同。高斯反射镜能够在不稳腔中提供更加的激光模式，控制实现基模振荡而消除高阶模。高斯反射镜和梯度反射率镜能够改善输出激光的光束质量，特别是在低放大倍率情况下这种光束质量的改变更为明显。高斯反射镜提供的锥形反射率分布可以减少光场分布中的振荡，从而减少高功率激光应用中的光学损伤。高斯反射镜和变反射率镜典型的反射率分布是镜片中心的反射率最大，反射率从镜片中心到边缘依次按函数关系减低。 高斯反射镜和梯度反射率镜参数变反射率镜材料：熔炉石英，UVFS或BK7梯度反射率镜类型：平/平镜片, PCV, PCX高斯反射镜直径：19.05mm +0.0, -0.15 mm变反射率镜厚度：6 mm +/-0.1 mm梯度反射率镜平整度：&lambda /10高斯反射镜光洁度：20-10 scratch & dig变反射率镜平行度：10 arc sec梯度反射率镜净孔径：90%变反射率镜镀膜损伤阈值：10 J/cm2 @ 1064 nm for 10 ns pulses高斯反射镜,变反射率镜,梯度反射率镜询问服务：请直接在如下的询问栏里填写您的要求，然后复制后Email给我们，您会收到及时的报价回复。 Material 材料 Dimensions, mm尺寸 Thickness, mm厚度 Type类型PCXPCVFlat/FlatMeniscus Radius of Curvature, mm 曲率半径 Center wavelength, nm 中心波长 Wedge 倒角 Ro, % 中心反射率 Wm, mm Gaussian order, k 高斯级数 Quantity

镜面反射组件（7201#）为FTIR红外光谱仪提供80度的镜面反射角,是理想的红外镜面反射附件.镜面反射组件功能特点镜面反射是分析透明薄膜的一种主要技术, 使用常见的透射光谱技术测量透明薄膜,透明薄膜常常发出微弱的光谱。主要应用是反射衬底上的表面镀膜,薄膜厚度测量,反射系数测量。实际应用决定入射角的选择. 30度的入射角用于测量比较常见的样品, 而且这些样品的薄膜厚度在微米量级。对于纳米厚度量级的薄膜,80度的入射角比较合理。如果待测薄膜的厚度未知, 那么比较适合选用, 它的可变角度范围为30-85度, 适合全部镜面反射的分析。这些附件都配有参考镜片,帮助用户获取背景光谱。,这些附件的设计都注意消除杂散光保证最小的能力损失。如果使用线网型偏振片,灵敏度还能进一步提高.本镜面反射组件和红外镜面反射附件仅仅提供80度的镜面反射角,. 30度和可变角度的附件可以另外购买.Specular Reflectance is a technique for analyzing transparent films which usually yield weak spectra by ordinary transmission techniques. Applications include surface coatings on reflecting substrates film thickness measurements by interference fringes and reflectivity coefficient determinations of metals. The application is the determining factor when deciding which angle of incidence should be selected. A 30 degree angle of incidence is normally chosen for more routine samples which have coating thicknesses in the micrometer range.镜面反射组件可选附件: 镜面反射附件反射组件 （PartNo. #9000 ）该红外镜面反射附件包括镜ATR附件、镜面反射和漫反射所有组件, 用于FTIR光谱仪的反射配件.组成如下:货号1075水平ATR系统配备45度ZnSe顶板,顶板夹,挥发物盖子和粉末压片. 镜面反射附件,镜面反射组件,镜面反射光谱仪,红外光谱镜面反射,货号6000高性能漫反射系统带有大小品杯、KBr粉末、样品漏洞、玛瑙砂浆/碓、骆驼毛画笔等.货号7200 30度镜面反射系统镜面反射组件组合型HATR Part No #9110 组合化学已经成为制药,生物科技,高分子科学和有机合成的必备技术. 红外镜面反射附件由于可以给出固态反应衬底的结构性信息而成为分析过程的重要工具.我们推出的MIRacle 组合型水平ATR可以让用户免于样品准备的繁琐而在一秒钟之内获得结果. 红外镜面反射附件提供了一个1.6mm的样品接口，配备了专门设计的组合秘诀珠，冠和别针专门装备的组合珠冠和别针.

自由空间THz-TDS 太赫兹时域光谱系统德国BATOP公司在THz系统的产品性价比非常高，款式也很多。主要产品有: TDS10XX、FC TDS和TDS（1060nm飞秒激光器）及其成像系统。 自由空间结构THz-TDS是基于1060nm飞秒光纤激光器的时域光谱系统。 主要特点：飞秒光纤激光器作为激励源发射天线为PCA-40-05-10-1060-a-l接收天线为PCA-44-06-10-1060-a-l延迟线最高可延迟1ns包含软件性能参数：频率范围0.1～2.5THz动态范围60dB 信噪比@0.4 THz1000最短扫描周期0.5s焦点离天线距离50mm