离轴抛物镜 Off-Axis Parabolic Mirrors
Off-Axis Parabolic Mirrors资料下载：Download Off-Axis Parabolic Mirrors Datasheet(PDF, 164 KB)Parabolic mirrors are the most common type of aspherical mirrors used in optical instruments. They are free from spherical aberrations, and thus focus the parallel beam to a point or point source to infinity.In many optical systems it is not necessary to use aperture that is completely rotationally symmetric. On the other hand, in some applications the central part of the mirror obscures the beam path and therefore is a disaster. For such systems, off-axis mirrors offer many advantages versus the traditional paraboloids.Main applications of off-axis parabolic mirrorsare as follows:Target simulatorsCollimatorsMTF measuring systems and other optics test devicesSpectroscopic and FTIR systemsRadiometersBeam expandersLaser divergence measuring systemsKey advantages of off-axis parabolic mirrorsUse of off-axis optics allows optical engineers to achieve the following advantages:Minimize system sizesMinimize system weightBoth “wedged” and equi-thick mirrors are availableMinimize system costAll this results in maximization of system efficiency and marketability.How to specify OAP mirrorFig. 1 Off-axis parabolic mirror draft.Description to the draft.Parent focal length(PFL)is the focal length of the parent paraboloid. It defines the shape of the surface as Z=R^2/4*PFL, where R is radial distance from vertex and Z is surface sagitta.Slant Focal Length(SFL)is the distance between OAP mechanical center and parabola focus. This value may be calculated from PFL and vice versa.Optical Centerline is the line parallel to parent parabola optical axis and coming through the mechanical center of OAP.Zonal Radius(ZR)is the distance between parent parabola optical axis and optical centerline of the OAP.Off-axis Distance(OAD)is the distance from parent parabola optical axis to inner edge of OAP. This value may be calculated from ZR and vice versa.Adjust flat is commonly glued to OAP. It is perpendicular to parent parabola optical axis (and therefore to OAP centerline) and helps greatly to adjust OAP in the optical system.To fully describe OAP one has to specify 5 parameters:PFL (or SFL),ZR (or OAD),CA (clear aperture),SA (surface accuracy),and SQ (surface quality).Auxiliary parameters are:preferable mechanical size and thickness (if not specified we state Diameter = CA+10 mm and Thickness = Diameter/8),preferable material (if not specified we state LK-7 optical glass – Russian analogue of Pyrex),and coating type (if not specified we state protected aluminum).Key data for OAP mirrors we produceTypical material is LK-7 (analogue of Pyrex), also AstroSitall CO-115M (analogue of Zerodur), and K8 glass (analogue of BK7) are available on request.Typical surface accuracy isl/8 at 633 nm PtV,l/40 RMS. Higher precision surfaces may be produced on the request.Typical coating is protected Al, other metal (silver or gold) or multilayer dielectric coatings are available on request.Off-axis angle is up to 45 degrees, typical value is 5-30 degrees.Focal lengths are from 150 mm up to 12 meters. Typical value is 0.5-2 meters.Diameters are up to 640 mm. Typical values are 100-400 mm.All these parameters are not independent. For example longer focal length allows better SA and longer ZR makes for lower SA.DocumentationTogether with each mirror we supply a certificate that shows SA, SQ, measured data for PFL and ZR, and the mechanical sizes. Interferometer graph of the surface, calculated surface error profile and coating reflection spectrum are attached to this certificate. Sample interferometer graph, surface error profile and coating spectrum are shown below. These are for CA 8” mirror with ZR 7” and FL40.Fig. 2 Typical interferometer graph of OAP mirror.Fig. 3 Surface error profile reconstruction.Wave front analysisUnits of deformations measuring: micronsWavelength: 0.633 μmReference surface: sphereSubtracted aberrations:Form of zonal error - Zernike polynomialParameters of regular errorsD = -0.000 Lx = 0.000 Ly = -0.000 C = 0.000 RMS(W) = 0.009A = 0.013 FIA = 41.300 PV = 0.025 RMS(W-A) = 0.007 FA = 0.361B0 = 0.007 PV = 0.011 RMS(W-Z) = 0.008 FZ = 0.137B2 = -0.043B4 = 0.043C = 0.020 FIC = 5.327 PV = 0.013 RMS(W-C) = 0.008 FC = 0.074Local errorsPV = 0.037RMS(M) = 0.006Characteristics of wavefrontRMSMINMAXPVSTRLSTRH0.009-0.0230.0320.0550.9980.999Fig. 4 Typical reflection spectrum for protected aluminum (Al + SiO2) coating.Short description and key advantages of the technologyThe manufacturing technology was developed to supply mirrors cheaper and in higher volume for use in aero/defence applications. Typically, OAPs are made by polishing and slicing-up large on-axis parent paraboloids. Obviously, this “traditional” method is quite expensive, especially when perhaps only 1-2 mirrors are needed. This older method also places heavy restrictions on the range of available combinations of focal lengths and off-axis distances. The other “traditional” method is diamond turning. Its main disadvantages are limitations for substrate materials (metals), lower surface roughness, and accuracy.Instead of the above-mentioned methods of OAPs production, our OAP facility uses a sophisticated, computer-controlled spot-correction polishing process. It combines advantages of conventional polishing (smooth surface and possibility to use common glasses) and diamond turning (possibility to produce OAP without polishing of full paraboloid). After each polishing run we measure the surface error using large interferometers that precisely simulate current surface error of the OAP mirror. Then the information from the interferometer is transferred to the polisher’s computerized controller, which calculates the optimum location, trajectory and rotation speed of the compact, spot-polishing head.We name this process retouching. 10,000 square-foot facility is used for this production. A team of highly experienced (and patient!) technicians set up and measure a mirror over and over until it is perfect. Each mirror undergoes typically about 10 cycles of interferometric measurements, followed by retouching. Of course for state-of-the-art mirrors many more cycles are required.This unique production technology allows us to offer precise optics at very competitive prices.更多太赫兹元件相关产品太赫兹透镜太赫兹偏振片HDPE太赫兹线栅偏振片太赫兹衰减片太赫兹波片太赫兹分束镜太赫兹光谱分光镜太赫兹棱镜太赫兹窗片太赫兹滤波片
我要推广仪器
下载APP
哈美顿有机相尼龙针式滤器（绿色、双层膜）SCAA-1104
哈美顿水相聚醚砜针式滤器黄色SCAA-202
哈美顿疏水PTFE针式滤器紫色SCAA-206
哈美顿亲水PTFE针式滤器金色SCAA-214
冠乾科技 纳米压印胶 正性光刻胶 负性光刻胶 显影液 去胶液
哈美顿疏水PTFE针式滤器(橙色)SCAA-205
比色法及滴定法试剂盒N7285
哈美顿疏水PTFE针式滤器(紫色)SCAA-106
哈美顿疏水PTFE针式滤器(橙色)SCAA-105
冠乾科技 硅片 测试片 正片 各种规格、工艺定制