有源倍频器

IMPATT有源倍频器 THz IAFM产品描述： Eachwave series IMPATT Active Frequency Multipliers IAFM are really unique devices providing an outstanding performance in terms of high efficiency and high output power. Available in multiplication factor up to 25 in one device they cover the output frequency range of 20 to 180 GHz using centimeter-wave range source. They are capable of handing very high input power without damage. Different IAFM’s would operate with the same centimeter-wave range pumping source. For example, on the picture above you can see the pumping source (20mW, 7.2775 GHz) and three different multipliers: IAFM-28 (5th harmonic, 36.3875 GHz), IAFM-15 (8th harmonic, 58.2200 GHz) and IAFM-10 (13th harmonic, 94.6075 GHz). The phase and amplitude stability of the output signal defined by the quality of the pumping source. It is possible to achieve Hz resolution on 150 GHz using state-of-the-art synthesized cm-wave source. The frequency multipliers are designed as a module, that consists of centimeter-wave high power preamplifier, a multiplier itself, band-pass filter and isolator. Current stabilizer included for reliable, trouble-free operation. The band-pass filter rejects the side band noise of the source on about -50 dB. That allows to use the device as low noise solid state LO, if intermediate frequency is higher then the frequency of rejection. The input of multiplier is a coaxial connector, and the output is a waveguide flange.产品特性：◆ 倍增因数高至 25 ◆ 高效率◆ 高功率输出水平◆ 低杂散谐波◆ 快速变换◆ 低相位&调幅噪声技术参数：型号IAFM -28IAFM -22IAFM -19IAFM -15IAFM -12IAFM -10IAFM -08IAFM -06频段频率范围GHz*Ka26.5-40Q33-50U40-60V50-75E60-90W75-110F90-140D110-180输出功率mW**150150120 1005030-5015-3010-20输入信号功率mW30-5030-5030-5030-5030-5030-5030-5030-50倍增因子5-86-107-108-1310-1514-1818-2419-25DC Power, V/A+12/0.6 -12/0.01 +50/0.15+12/0.6 -12/0.01 +45/0.15+12/0.6 -12/0.01 +45/0.15+12/0.2 -12/0.01 +35/0.15+12/0.6 -12/0.01 +35/0.2+12/0.6 -12/0.01 +27/0.2+12/0.6 -12/0.01 +24/0.2+12/0.6 -12/0.01 +24/0.26* Operation bandwidth 3-5%. Upon request 10% version is available. ** Values are presented for the middle frequency of the frequency band.产品应用：◆ Power sources ◆ Electronic tuned power sources ◆ Millimeter wave frequency synthesizers ◆ Spectroscopy/Radiometry ◆ Digital Radiocommon specification—— Output power flatness within the 1% band width (max) 1.5 dB —— Rejection of adjacent harmonics (min) 40 dB—— VSWR 1:1.3—— AM noise inserted (max) -130 dB/Hz (white noise) There is no additional noise produced by IAFM-XX in comparing with passive multipliers. It can be estimated using the formula: Noise of pumping source +20Lg(N) dB/Hz. For example, if 7 GHz pumping source has -120dB/Hz on 10 kHz offset from the carrier, after frequency multiplication on a factor of 20 the noise of 140 GHz source on 10 kHz offset will be -120dB/Hz+20Lg(20) = -94 dB/Hz. Series IAFM-XX are designed for high reliability and applications in hard environments. The operating temperature range: minus 50 to plus 70 ℃ and life time is equal to 50000 hours. Each model may be produced with the possibility of the fast output power switching. 1 ns time of on/off switching is allowed. Optionally the following items would be supplied to meet customer requirements: —— Complete very stable solid state millimeter wave source, that consists of the following: Transistor oscillator stabilised by the dielectric resonator (DRO). 6-8 GHz, 10 mW output, 10 -6 frequency stability. The stability would be increased upon request using a temperature stabilization scheme. Accuracy of frequency adjustment is about 5-50 MHz. The adjustment is provided on the factory according to customer requirements. —— Millimeter wave sweeper on the base of Varactor Controlled Oscillator (6-8 GHz, 10 mW). Other elements of the scheme are the same as above. Typical bandwidth is 0.5-1%. —— The frequency bandwidth would be also increased upon request. The limit is the distance between nearest harmonics, so it is impossible to provide the bandwidth more than the pumping frequency. The real bandwidth would be about 50-80% of the initial (pumping) frequency. —— IMPATT Injection-Locked Amplifiers IILA series to increase the output power. —— Phase or amplitude modulator on the base of fast P-I-N switch FPS series. —— Amplitude regulator on the base of Voltage Controlled Attenuator VCVA series. —— Power supply for AC Input Voltages 110 V, 60Hz 220 V, 50 Hz.

倍频器 ASG， ATSG，AFsG和AMG二倍频模块（三倍频、四倍频）的功能是通过倍频转换输入波长。输入波长可以从720nm -1600nm，工作原理是利用倍频技术产生稳定的激光源，在飞秒量级的应用中具有较好光束质量和优秀的脉冲扩展。 产品特色：高转换效率小离散角小光束发散角不发热 产品一览表：产品型号输入波长范围二倍频输出三倍频输出四倍频输出转换效率ASG720-1600 nm360-800 nmnonoSH: 20-50%ATsG750-1600 nm375-800 nm250-533 nmnoSH: 20-50% TH: 3-15%AFsG820-1600 nm410-800 nmno205-400 nmSH: 20-50% FH: 3-10%AMG780-1600 nm390-800 nm260-533 nm195-400 nmSH: 30-60% TH: 5-10% FH: 1-10% 产品详细参数详情：ASG. 二倍频器二倍频用于上转换（倍频）飞秒激光源的固有频率。ASG-O(for oscillators)ASG-A(for amplifiers)可实现的输入波长范围*720-1600 nm输入波长调谐范围**50-100 nm输出波长***360-800 nm输入脉宽20 fs输入偏振linear, horizontal输出偏振linear, vertical输入平均功率0.1-3 W10 W输入脉冲能量2 uJ2 uJ - 10 mJ输入光斑直径1/е^22 mm10 mm转换效率****20-50%30-50%脉冲展宽100 fs尺寸280x140x190 mm* - may be covered by several exchangeable optics sets, please indicate the desired wavelength range upon your request ** - typical with one optics set, depends on exact central wavelength and pulse duration *** - defined by input wavelength **** - defined by input pulse energy and input pulse duration. ATsG.二倍频、三倍频器（用于飞秒激光）ATsG-O(for oscillators)ATsG-A(for amplifiers)可实现的输入波长范围*750-1600 nm输入波长调谐范围**50-100 nm输出波长***375-800 nm (SH)250-533 nm (TH)输入脉宽20 fs输入偏振linear, horizontal输入平均功率0.3-3 W10 W输入脉冲能量2 uJ2 uJ - 10 mJ输入光斑直径1/е^22 mm10 mm转换效率****20-50% (SH)3-8% (TH)30-50% (SH)8-15% (TH)脉冲展宽100 fs (SH)200 fs (TH)100 fs (SH)180 fs (TH)输出偏振SH - linear, vertical ТГ - linear, horizontal尺寸480x222x192 mm* - may be covered by several exchangeable optics sets, please indicate the desired wavelength range upon your request ** - typical with one optics set, depends on exact central wavelength and pulse duration *** - defined by input wavelength **** - defined by input pulse energy and input pulse duration. AFsG. 二倍频、四倍频器（用于超快激光）AFsG-A-1045 二倍频和四倍频用于Yb-Doped 固态和光纤放大系统AFsG-O(for oscillators)AFsG-A(for amplifiers)可实现的输入波长范围*820-1600 nm输入波长调谐范围**50-100 nm输出波长***410-800 nm (SH)205-400 nm (FH)输入脉宽50 fs输入偏振linear, horizontal输入平均功率0.3-3 W10 W输入脉冲能量2 uJ2 uJ - 10 mJ输入光斑直径1/е^22 mm8 mm转换效率****20-50% (SH)3-8% (FH)30-50% (SH)5-10% (FH)脉冲展宽100 fs (SH), 1000 fs (FH)输出偏振SH - linear, vertical FH - linear, horizontal尺寸480x222x192 mm* - may be covered by several exchangeable optics sets, please indicate the desired wavelength range upon your request ** - typical with one optics set, depends on exact central wavelength and pulse duration *** - defined by input wavelength **** - defined by input pulse energy and input pulse duration. AMG.二倍频、三倍频、四倍频模块AMG-A-1030多倍频器用于1um放大器AMG-A(for amplifiers)可实现的输入波长范围*780-1600 nm输入波长调谐范围**50-100 nm输出波长***390-800 nm (SH)260-533 nm (TH)195-400 nm (SH)输入脉宽50 fs输入偏振linear, horizontal输入平均功率10 W输入脉冲能量0.2-10 mJ输入光斑直径1/е^28 mm转换效率****30-50% (SH), 5-10% (TH), 1-10% (FH)脉冲展宽100 fs (SH), 250 fs (TH), 1000 fs (FH)输出偏振linear: SH - vertical TH - horizontal FH - vertical尺寸480x222x192 mm* - may be covered by several exchangeable optics sets, please indicate the desired wavelength range upon your request ** - typical with one optics set, depends on exact central wavelength and pulse duration *** - defined by input wavelength **** - defined by input pulse energy and input pulse duration.

奥里亚（Oria Vis）红外-可见光飞秒SHG倍频器1961年，美国密歇根大学的Franken等人发现红宝石激光(694.3 nm)通过石英晶体后产生了一条波长为347.15 nm的新谱线，新产生的光的频率正好是原入射光的两倍，，这就是光倍频现象。激光倍频器也被称为二次谐波（SHG）发生器，它就利用了非线性晶体在强激光作用下的二次非线性效应，使频率为ω的激光通过晶体后变为频率为2ω的倍频光。激光倍频技术大大扩展了激光的波段，是将激光向短波长方向变换的主要技术方法,在激光技术中被广泛采用。激光倍频不仅能产生二倍频率的波长，为得到波长更短的激光可以利用多级倍频技术来实现。SHG技术具有非常广泛的应用，随着其商品化器件和装置的产生，目前已经是科学实验中非常实用的技术手段。Oria Vis 可见光飞秒SHG倍频器是Radiantis公司推出的一款用于将红外OPO飞秒激光倍个频至可见光波段的可调谐二次谐波发生器。Oria Vis 可见光飞秒SHG倍频器具有前所未有的光谱覆盖范围，可将 990-1550 nm 的 IR OPO 波长转换为 495-775 nm 的可见光波长。Oria Vis 可见光飞秒SHG倍频器应用于时间分辨光谱、单分子光谱、泵浦-探测实验、CARS和拉曼显微镜、 纳米光子学等研究领域。(1)ORIA VIS具有出色的转换效率（40%），提供400 mW的功率和出色的稳定性。(2)Oria Vis有四种波长输出：1） 全功率时为 990 – 1550 nm，2） 495 – 775 nm，3） 1680-4000 nm，4） 990 – 1550 nm（未耗尽）(3)这款紧凑型倍增装置具有更低的脉冲展宽和卓越的光谱空间光束质量(4)与大多数商业飞秒源兼容为需要以 MHz 重复频率传输飞秒光脉冲的广泛应用提供了出色的工具ORIA VIS是全自动的，调谐通过PC控制，提供免对准安装和简单可靠的操作。自动化的 ORIA VIS 控制软件可确保在几秒钟内快速可靠地调谐，同时提供一系列实用的操作功能。该倍增装置设计用于由标准超快MHz重复率IR OPO泵浦激光器。更多产品详情，欢迎联系昊量光电！1、Oria Vis 可见光飞秒SHG倍频器-典型调谐曲线及钻石图2、Oria Vis 可见光飞秒SHG倍频器-波长范围3、Oria Vis 可见光飞秒SHG倍频器-产品参数Tuning range 495 - 775 nmOutput power(2) 400 mWPulse width(3) 180 fsBeam diameter at 525 nm 2.5 mmBeam divergence 1 mradBeam displacement with wavelength 2.5 μmSpatial mode TEM00Polarization VerticalRepetition rate 80 MHzSize (W x L x H) 568.0 x 366.5 x 189.2 mm (22.4 x 14.4 x 7.5 inch)更多详情请联系昊量光电/欢迎直接联系昊量光电关于昊量光电：上海昊量光电设备有限公司是光电产品专业代理商，产品包括各类激光器、光电调制器、光学测量设备、光学元件等，涉及应用涵盖了材料加工、光通讯、生物医疗、科学研究、国防、量子光学、生物显微、物联传感、激光制造等；可为客户提供完整的设备安装，培训，硬件开发，软件开发，系统集成等服务。您可以通过我们昊量光电的官方网站www.auniontech.com了解更多的产品信息，或直接来电咨询4006-888-532。