推荐厂家
暂无
暂无
哪位大侠有浊度仪检定的国家标准阿?可否发上来共享一下,我们的仪器本来是送出去检定的,费用挺高的,想要自己进行检定呢。
带颜色的水样是不是浊度不一定比清晰的水样浊度高啊。这两天测的水样是工业污水,有黑色,还挺深的,稍微放置一会儿就会沉淀下去,上清液比较轻澈。但是上[url=https://www.hach.com.cn/product/tssportable][color=#000000]浊度检测仪[/color][/url]发现刚开始的浊度数值比沉淀之后的浊度值还要小的。怎么会越澄清越浊度变大呢?难道是浊度仪坏掉了?
浊度是表现水中悬浮物对光线透过时所发生的阻碍程度。 水体混浊现象是由水中存在的悬浮物质如泥砂、胶体物(colloid matter)、有机物、 浮游生物(plankton organism)、微生物(microorganism)等所造成。浊度的大小不仅 与水体中的颗粒物有关,而且与其颗粒大小、形状和表面积有关。天然水经过混凝、 沉淀和过滤等处理,使水变得清澈。常用的测量浊度的方法有:1、 分光光度法 2、目视比浊法 3、 浊度计测定法1、分光光度法(spectrophotometry):选用1厘米比色皿(cuvette),在波长660纳米处, 测定标准浊度液吸光度值。绘制吸光度—浊度标准曲线,然后测定水样的吸光度值,并从 标准曲线上查出相应的浊度。当浊度超过100度时需稀释后测定,计算时应乘上相应的稀 释倍数。将一定量硫酸肼与6-次甲基四胺聚合,生成白色高分子聚合物,作为浊度标准溶 液,在一定条件下与水样浊度比较。 该法适用于天然水、饮用水及高浊度水的测定,最低检测浊度为3度。2、目视比浊法(visual turbidity):将水样与用硅藻土(或白陶土)配制的标准浊度 溶液进行比较,以确定水样的浊度。 适用于饮用水、水源水等低浊度水的测定,最低检测浊度为1度。3、浊度计测定法:利用各种类型的浊度测量仪进行测定。 常用浊度单位:FTU 和 NTU ,二者分别以不同人的名字命名,但数值相等。第一篇 分光光度法2 原理在适当温度下,硫酸肼与六次甲基四胺聚合,形成白色高分子聚合物,以此作为浊度标准液,在一定条件下与水样浊度相比较。3 试剂除非另有说明,分析时均使用符合国家标准或专业标准分析纯试剂,去离子水或同等纯度的水。3.1 无浊度水将蒸馏水通过0.2μm滤膜过滤,收集于用滤过水荡洗两次的烧瓶中。3.2 浊度标准贮备液3.2.1 1g/100mL硫酸肼溶液称取1.000g硫酸肼溶于水,定容至100mL。注:硫酸肼有毒、致癌!3.2.2 10g/100mL六次甲基四胺溶液称取10.00g六次甲基四胺[font='Tahoma','sans-serif