液体样品移液管 | 80-0691

产品特点：

液体样品移液管 （Liquid Sample Transfer Pipettes）

Chemplex® transfer pipettes are used to conveniently fill Chemplex® XRF Sample Cups with consistent volumes of samples and standards to their near volumetric capacities, minimize or eliminate any discrepancies in x-ray data attributed to dissimilar volumes, avoid spillage and prevent cross-contamination possibilities plus they are affordably priced for disposability.

CHEMPLEX ®移液管是用来方便地填补CHEMPLEX ® XRF的样品和标准一致的体积样品杯他们近体积容量，最大限度地减少或消除由于不同容量的X射线数据的差异，避免泄漏和防止交叉污染的可能性加上它们的价格合理，可一次性使用。

Features

● Equal sample volumes per sample cup

● Avoid spillages and contamination issues

● Unbreakable polyethene

特点

● 每个样品杯相等的样品量

● 集成灯泡和阀杆

● 坚不可摧的聚乙烯

For general laboratory applications, transfer pipettes find their greatest utility in transferring innumerable types of liquid chemicals into other laboratory containers. With Chemplex® transfer pipettes this procedure is greatly simplified and performed with ease, reasonable degrees of accuracy, safety, no contamination and economically priced for disposability.

对于一般的实验室应用，移液吸管在将无数种液体化学物质转移到其他实验室容器中找到了最大的用途。与Chemplex® 移液管此过程被极大地简化且容易进行的，合理的准确度，安全性，没有污染的和定价为可处理在经济上。

Note: Transfer pipettes are non-sterile and sold only in complete packages. As a reminder, be certain to order the number of pipettes to correspond to the number of sample cups to be filled; Chemplex® XRF Sample Cups are packaged in quantities of 100 sets.

注意：转移吸量管是非无菌的，只能整包出售。需要提醒的是，一定要让吸量管的数量与样品杯的数量相一致；Chemplex® XRF 样品杯的包装数量为100套。

订货信息：

产品应用：

How to Use Transfer Pipettes: Transfer pipettes are fabricated from unbreakable polyethylene; the bulbs are integrated with the stems as single units. Squeeze the pipette bulb to expel the air and insert the tip into the sample. Release the applied hand pressure to the bulb until the sample is completely drawn up. Insert the tip of the filled pipette into the sample cup and gently squeeze the bulb to dispense the entire sample. Repeat the procedure in instances that require additional draws to fill the sample cup as tabulated in the Pipette Selection Chart.

如何使用移液管：移液管是用不易破碎的聚乙烯制成的。鳞茎和茎秆作为单个单元整合在一起。挤压移液器灯泡以排出空气，然后将吸头插入样品中。释放施加到灯泡上的手压力，直到样品完全吸干为止。将装好的移液器的尖端插入样品杯中，然后轻轻挤压灯泡以分配整个样品。在需要额外抽水以填充样品杯的情况下重复该步骤，如移液器选择表中所示。

Viscosity Considerations: The transfer of viscous substances such as petroleum, waste oils, paint and slurries is more expeditiously handled with large pipette tips. Most other materials with high fluidity characteristics are served best with pipettes having fine tips. Empirical testing is suggested for confirmation of convenience.

粘度注意事项：使用大的移液器吸头可以更快速地处理诸如石油，废油，油漆和泥浆等粘性物质的转移。具有高流动性的大多数其他材料最好与尖端细的移液器配合使用。建议进行经验测试以确认方便。

Disposability: Transfer pipettes are intended to be used once, except for multiple sequential draws, to avert cross-contamination possibilities. Dispose used pipettes properly in accordance with local and other accepted authorities and procedures.

一次性使用：移液移液器只能使用一次，但要进行多次连续抽吸，才能避免交叉污染的可能性。根据当地和其他公认的权威机构和程序正确处理用过的移液器。

Easy Selection Process: Selection of the most appropriate transfer pipette is correlated to the volumetric capacities of Chemplex® XRF sample cups and the dispensing volumes of pipettes. Simply refer the Chemplex® sample cup catalog number to the pipette catalog number(s). The number of draws required to fill a sample cup have been pre-determined and a choice of tips and style sare provided. 

容易选择过程：最适当的移液管的选择关联于Chemplex® 的体积容量 XRF样品杯和吸液管的分配体积。只需将Chemplex® 参阅样品杯目录号到移液器目录号（多个）。已预先确定了填充样品杯所需的抽奖次数，并提供了一些技巧和样式可供选择。