产品名称: 人Ⅱ型胶原交联C端肽(CTX-Ⅱ)ELISA Kit
英文名称: Human Cross Linked C-Telopeptide Of Type II Collagen ,CTX-Ⅱ ELISA Kit
货号: CSB-E14328h
规格: 96T
种属: Human
待测物名称: Cross Linked C-Telopeptide Of Type II Collagen ,CTX-Ⅱ
缩写: CTX-Ⅱ
样本类型: serum, plasma, urine
检测范围: 0.312 ng/ml-20 ng/ml
灵敏度: 0.078 ng/ml
反应时间: 1-5h
所需样本体积: 50-100ul
检测波长: 450 nm
用途: For research use only. Not for diagnostic use.
精密度: Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
样本搜集及储存: Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
检测步骤: Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
结果计算: Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the CTX-Ⅱ concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
相关产品:
产品名称 英文名称 货号 规格
牛促肾上腺皮质激素(ACTH)ELISA Kit Bovine adrenocorticotropic hormone (ACTH) ELISA kit CSB-E14322B 96T
人Ⅱ型胶原C端肽(CTX-Ⅱ)ELISA Kit Human C-telopeptide of type Ⅱ collagen,CTX-Ⅱ ELISA Kit CSB-E13785h 96T
小鼠肥大细胞类胰蛋白酶(MCT)ELISA Kit Mouse Mast Cell Tryptase(MCT) ELISA Kit CSB-E14326m 96T
兔子Ⅱ型胶原C端肽(CTX-Ⅱ)ELISA Kit Rabbit cross linked C-telopeptide of type Ⅱ collagen (CTX-Ⅱ) ELISA Kit CSB-E16213Rb 96T
小鼠Ⅱ型胶原C端肽(CTX-Ⅱ)ELISA Kit Mouse C-telopeptide of type Ⅱ collagen(CTX-Ⅱ)ELISA Kit CSB-E16211m 96T
人3-硝基酪氨酸ELISA Kit Human 3-nitrotyrosine (3-NT) ELISA Kit CSB-E14324h 96T
绵羊孕酮受体(PGR)ELISA Kit Sheep progesterone receptor,PGR ELISA Kit CSB-E14325Sh 96T
猴子N端前脑钠素(NT-proBNP)ELISA Kit Monkey N-terminal pro-brain natriuretic peptide,NT-proBNP ELISA KIT CSB-E14327Mk 96T
猪白介素15(IL-15)ELISA Kit Pig Interleukin 15(IL-15) ELISA Kit CSB-E14320p 96T
猪高尔基蛋白73(GP-73)ELISA Kit Pig golgi protein 73,GP-73 ELISA Kit CSB-E14323p 96T
大鼠Ⅱ型胶原C端肽(CTX-Ⅱ)ELISA Kit Rat C-telopeptide of type Ⅱcollagen,CTX-Ⅱ ELISA Kit CSB-E12963r 96T
更多
更多
人Ⅱ型胶原交联C端肽(CTX-Ⅱ)ELISA Kit说明书
产品类型:ELISA Kit 产品名称:人Ⅱ型胶原交联C端肽(CTX-Ⅱ)ELISA Kit 英文名称:Human Cross Linked C-Telopeptide Of Type II Collagen ,CTX-Ⅱ ELISA Kit 货号:CSB-E14328h 规格: 96T 种属: Human 其他种属:Goat Mouse Rabbit Rat Pig 检测范围: 0.312 ng/ml-20 ng/ml 灵敏度: 0.078 ng/ml 反应时间: 1-5h 所需样本体积: 50-100ul 检测波长: 450 nm
321KB
2014/07/21
人Ⅱ型胶原交联C端肽(CTX-Ⅱ)ELISA Kit说明书
产品类型:ELISA Kit 产品名称:人Ⅱ型胶原交联C端肽(CTX-Ⅱ)ELISA Kit 英文名称:Human Cross Linked C-Telopeptide Of Type II Collagen ,CTX-Ⅱ ELISA Kit 货号:CSB-E14328h 规格: 96T 种属: Human 其他种属:Goat Rat Mouse Rabbit Pig 待测物名称: Cross Linked C-Telopeptide Of Type II Collagen ,CTX- 缩写: CTX- 检测范围: 0.312 ng/ml-20 ng/ml 灵敏度: 0.078 ng/ml 反应时间: 1-5h 所需样本体积: 50-100ul 检测波长: 450 nm
309KB
2014/07/07
更多
企业名称
上海希美化学有限公司
企业信息已认证
企业类型
信用代码
310228001203103
成立日期
2009-05-31
注册资本
10
经营范围
化工原料及产品(除危险化学品、监控化学品、烟花爆竹、民用爆炸物品、易制毒化学品),实验室设备,仪器仪表,金属制品,电子产品,机电产品销售,从事化工科技、计算机科技领域内技术开发、技术咨询、技术服务。【依法须经批准的项目,经相关部门批准后方可开展经营活动】
上海希美化学有限公司
公司地址
上海市松江区陆家圈路168弄113号
客服电话