| Description | Specifications | Use | Unit | 7700
Part No. | 7500
Part No. |
| MicroMist Nebulizer | Borosilicate glass | Standard on 7700x/e and 7500cx/ce.
When ordered for the 7500a, the spray chamber
end cap (G1833-65475) is also required. | | G3266-65003 | G3266-65003 |
| Sample tubing | 0.25 mm ID, 700 mm,
with connector | For MicroMist Nebulizer | 10/pk | G3266-80010 | G3266-80010 |
| Sample tubing | 0.5 mm ID, 700 mm,
with connector | For MicroMist Nebulizer | 10/pk | G3266-80011 | G3266-80011 |
| Carrier gas connector | | For MicroMist Nebulizer | | G3266-80015 | G3266-80015 |
| Nebulizer cleaner | | For MicroMist Nebulizer | | G3266-80020 | G3266-80020 |
| MicroFlow Nebulizer | PFA, 200 μL/min | | | G3139-65100 | G3139-65100 |
MicroFlow Nebulizer
with I-AS probe | PFA, 200 μL/min | Standard on 7700s and 7500s | | G3139-65102 | G3139-65102 |
| MicroFlow Nebulizer | PFA, 20-50 μL/min | | | G3139-65106 | G3139-65106 |
MicroFlow Nebulizer
with I-AS probe | PFA, 20-50 μL/min | | | G3139-65108 | G3139-65108 |
| Carrier gas line connector | | For MicroFlow Nebulizer | 2/pk | G1833-65583 | G1833-65583 |
| Mira Mist Nebulizer | PTFE | | | G3161-80000 | G3161-80000 |
| Mira Mist Nebulizer | PEEK | For high solids applications such as environmental,
geological, etc. Not for semiconductor use since
it does not self aspirate. When ordered for
the 7500a, the spray chamber end cap
(G1833-65475) is also required (included
with 7500cx/cs). | | G3161-80001 | G3161-80001 |
| Babington Nebulizer | Includes Viton O-ring,
PTFE sample tubing,
and connector | Use to introduce samples with high matrix
and high total salts. Clean when contaminated
or when orifices are clogged. | | | G1820-60453 |
End cap for Babington
Nebulizer, polypropylene | Includes Viton O-rings | Replace when memory effects do not disappear
after cleaning. Insert nebulizer in middle of end
cap all the way through. Attach end cap to spray
chamber with "TOP" mark facing up. | | | G1833-65476 |
Babington Nebulizer
removal tool | | | | | G1820-65345 |
Concentric Nebulizer,
Pyrex | Use with P/N
G1820-65052
Argon gas connector,
P/N G1820-60160
Connector kit, P/N
G1820-65121 end cap | Use with clean samples only. Not resistant
to hydrochloric acid. Clean with a 5% HNO3 (v/v)
bath; do not use ultrasonic bath. | | G1820-65030 | G1820-65030 |
Concentric Nebulizer,
quartz | Use with P/N
G1820-65337
Quartz spray chamber,
P/N G1820-80237
Quartz connecting pipe | Recommended for trace analysis of clean samples.
Lower contamination level than Pyrex. Clean using
5% HNO3 (v/v) bath; do not use ultrasonic bath. | | G1820-65138 | G1820-65138 |
Connector for carrier gas
line, polypropylene | 4 mm tubing, includes
ferrule and O-ring | For gas line connection to Concentric Nebulizer | | G1820-65052 | G1820-65052 |
Sample tubing with
connector, PTFE | Tool included | For Babington Nebulizer, replace when heavily
contaminated by high matrix samples. | | | G1820-65276 |
| Sample line connector | Includes Viton O-ring | Connects Concentric Nebulizer with sample line.
Port with large hole connects to nebulizer; smaller
port connects with sample tubing. | | G1820-60160 | G1820-60160 |
| Union fitting | 4 mm tubing | For PFA Concentric Nebulizer | | 5064-8078 | 5064-8078 |
Ferrule and Viton O-ring
kit for carrier gas line
connector | | For Babington/Concentric Nebulizer | | G1820-65533 | G1820-65533 |
End cap for Concentric
Nebulizer, PTFE | Includes Viton O-rings | Connects the Concentric Nebulizer (Pyrex or
Quartz) with the spray chamber. For MicroMist,
MicroFlow, and other concentric nebulizers. | | | G1833-65475 |
O-rings for Babington
Nebulizer, Viton | | Used to create seal between Babington
Nebulizer and end cap. | 4/pk | | G1820-65199 |
O-ring kit for Concentric
Nebulizer, Viton | 2 sizes, 10 each | | 20/pk | G1820-65491 | G1820-65491 |
O-rings for Concentric
Nebulizer, for organic
solvents (3 types) | | | 4/pk | G1820-65520 | G1820-65520 |
| O-rings for end cap, Viton | | Use for the end cap of the Babington Nebulizer,
Cross Flow Nebulizer and Concentric Nebulizer. | 5/pk | | G1820-65198 |
O-rings for end cap,
for organic solvents | | | 2/pk | | G1820-65518 |
| CrossFlow Nebulizer | Includes bushing,
carrier gas line
connector, blend gas
line connector, sample
tubing, and gas line
tubings with
inner sleeves | Standard nebulizer for the inert kit.
Resistant to hydrofluoric acid. Set carrier
gas pressure to 500 kPa (5 kg/cm2).
Clean with 5% HNO3 (v/v) bath. Replace
when memory effects remain after cleaning. | | | G1833-65462 |
关注
已认证
