看了null的用户又看了
上海金鹏分析仪器有限公司综合国内外优秀生化实验设备制造经验独家生产的4520TF型原子吸收分光光度计,进行系统详解,可快速查询产品的最新报价、图片、技术参数,或者进行产品性能比较,使用非常方便。
4520TF型原子吸收分光光度计 使用注意事项:
在安放 AA4520TF 仪器的工作室内不准有明火 , 乙炔钢瓶和仪器不得同处于一个房间
放置乙炔钢瓶的房间必需通风良好 , 房间内不得有明火.
仪器点火时 , 乙炔流量不能超过 3L/min, 并在点火前保证废液管中有水封
乙炔钢瓶输出压力不能超过 0.12 兆帕
仪器点火后 , 操作人员不能远离仪器
熄火时 , 应先关乙炔钢瓶 , 待火焰熄灭后 , 再按工作站火焰原子化器参数设置的 " 检测 " 键 , 直至把管内乙炔余气放空
用户若要做笑气一乙炔 , 必需经我公司技术员培训后才能使用 .
4510GF( 石墨炉 ) 开机时 , 需要通大功率 220V 电源和水、气 , 为了安全 , 开机后操作人员不能远离仪器
产品用途
该仪器可检测土壤有效微量元素、植物微量元素检测(铜、铁、锰、锌、钙、镁六元素)完全由 PC 控制操作 , 可以灵活选配火焰、石墨炉原子化器的高度自动化的原子吸收分光光度计。独特的光学机械设计 , 安全方便的火焰系统 , 先进的石墨炉温控技术 , 可选择的扣背景技术 , 以及由工作站提供的各项方便功能 , 适应您对自动化的精确测定结果的追求。
产品参数
主机:
采用多灯自动切换转塔 , 满足铜、锌、钙、镁、铁、锰、 钾等元素连续测定要求
灯塔:
波长范围 :190nm~900nm
波长重复性 : ± 0.3nm( 实测± 0.1nm)
波段准确性 : 全波长± 0.5nm( 实测± 0.2nm);吸光度范围 :0~3(A)
分辨率 : 光谱带宽 0.2nm时能分开锰双线 (279.5nm 和 279.8nm) 且谷峰能量比小于 40%
光谱带宽 :0.1nm 、 0.2nm 、 0.4nm 、 1.Onm
静态基线漂移 : ≤ 0.004A/30min (Cu)
光栅数 :1800 条 /mm
D2 背景扣除方式 : 背景信号 1A 时 , 扣除背景能力≥50 倍自吸收背景扣除方式
电源 :200V AC
火焰系统 :
乙炔空气火焰燃烧头 :10Omm; 笑气乙炔火焰燃烧头 :50mm;
雾化室 : 聚丙烯涂层 ;
点火动态基线漂移 :≤ 0.006A/30min; 灵敏度 (CU )特征浓度 : ≤ 0.025 μg/ml/1%;
精密度相对标准偏差 : ≤ 0.5%(Cu, 吸光度 > 0.8A)( 检出限 Cu ≤0.008 μg/m|);
安全系统 : 压力不足、电源中断、熄火或燃烧头不匹配时 , 自动切断燃气
石墨炉系统 : 最大升温速度: ≥ 2000 ℃ /S; 特征量 :Cd ≤ 1×10-12g Cu ≤ 1×10-11g
精密度 :Cu ≤ 3%( 相对标准偏差 );Cd ≤ 3%( 相对标准偏差 );
尺寸和重量 :550mm × 450mm × 300mm 65kg
过电流保护 ; 低保护气压力报警 / 保护 ; 低冷却水流量报警 / 保护
电源 :AC 220V 功率 :7000W
特别申明:⑴本网站所列价目,如厂方有变动,请以厂家新价格为准。
⑵批发优惠幅度因各厂情况不同,请来电咨询。
Analytical Instruments Co., Ltd. Shanghai Jinpeng excellent chemical and biological laboratory equipment and foreign manufacturing experience exclusively produced 4520TF-type atomic absorption spectrophotometer, systematic Xiangjie to quickly check the latest products, quotes, pictures, technical parameters, or product performance comparison, very convenient to use.
4520TF-type atomic absorption spectrophotometer Caution:
The work of planting AA4520TF equipment room are not allowed to have open flame, acetylene cylinders and equipment shall not be the same in a room
Acetylene cylinders must be placed well-ventilated room, the room shall not have open fires.
Ignition device, the acetylene flow rate can not exceed 3L/min, and waste water pipes before ignition to ensure there is water-sealed
Acetylene cylinder output pressure can not be more than 0.12 MPa
Ignition device, the operator can not be away from the apparatus
Flame, they would first off acetylene cylinders until the flame goes out, and then flame atomizer parameters of the workstation-based "test" button, until the pipe more than acetylene gas venting
Users who need to do a nitrous oxide acetylene, must be certified by my company technician training to use.
4510GF (graphite furnace) boot, you need to pass high-power 220V power supply and water, gas, for safety, the operator can not turn away from the apparatus after the
Usage
The instrument can detect trace elements in soil, plants detect trace elements (copper, iron, manganese, zinc, calcium, magnesium, 6 elements) is completely controlled by the PC operations, can be flexible and optional flame, graphite furnace atomizer of the highly automated atomic absorption spectrophotometer. Unique optical mechanical design, fire safety, and convenience systems, and advanced graphite furnace temperature control technology, alternative buckle background art, as well as the convenience provided by the workstation features to adapt to your precise determination of the results of automation pursuit.
Product parameter
Host:
Multi-turret lights automatically switch to meet the copper, zinc, calcium, magnesium, iron, manganese, potassium and other elements required continuous determination
Lighthouse:
Wavelength range: 190nm ~ 900nm
Wavelength repeatability: ± 0.3nm (measured ± 0.1nm)
Band Accuracy: full wavelength ± 0.5nm (measured ± 0.2nm); Absorbance Range: 0 ~ 3 (A)
Resolution: 0.2nm spectral bandwidth can be separated when the two-manganese (279.5nm and 279.8nm) and the valley is less than 40% of the peak energy
Spectral bandwidth: 0.1nm, 0.2nm, 0.4nm, 1.Onm
Static baseline drift: ≤ 0.004A/30min (Cu)
Grating number: 1800 / mm
D2 background subtraction methods: background signal 1A, the net capacity of ≥ 50 times the background of self-absorption background subtraction method
Power: 200V AC
Flame System:
Air-acetylene flame head: 10Omm; nitrous oxide acetylene flame head: 50mm;
Spray chamber: polypropylene coating;
Ignition dynamic baseline drift: ≤ 0.006A/30min; sensitivity (CU) characteristic concentration: ≤ 0.025 μg/ml/1%;
Precision relative standard deviation: ≤ 0.5% (Cu, absorbance> 0.8A) (detection limit of Cu ≤ 0.008 μg / m |);
Safety systems: pressure enough, power interruption, turn off or burning when the head does not match, automatically cut off the gas
Graphite furnace system: Maximum heating rate: ≥ 2000 ℃ / S; characteristic parameters: Cd ≤ 1 × 10-12g Cu ≤ 1 × 10-11g
Precision: Cu ≤ 3% (relative standard deviation); Cd ≤ 3% (relative standard deviation);
Size and weight: 550mm × 450mm × 300mm 65kg
Over-current protection; low air pressure alarm protection / conservation; low cooling water flow alarm / protection
Power Supply: AC 220V Power: 7000W
In particular that: ⑴ prices listed on this site, such as a change in the factory, please factory new price shall prevail.
⑵ the wholesale margin of preference for each plant is different, please call us
最多添加5台