全电脑拉力机

YL-1109全电脑拉力试验机 Tensile Testing Machine/Material Testing Machine

仪器简介：
此机台为本公司最新推出之新款拉力试验机,采用最新的设计概念及制造技术,达成体积最小化及重量轻量化,而仍然保有本公司出品之试验机一贯的测试精准,操作简单,扩充性强等优点, 尤其在胶粘测试和小力量行业测试、具有剥离力的平均力量,分析，是进行小容量测试之最佳选择。

YL-1109 Tensile Testing Machine
Purpose:
This tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials. It is a basic equipment of quality control, receiving inspection, physical test, mechanics research, material development.

Function:
Can conduct tensile, compression, peeling, tearing, shearing, ring initial adhesion and other test
Can display force and displacement at the same time
Adopt stepper motor drive, precision ball screw drive, set test speed by computer directly.
Up & low fine-turning switch, automatic back after test finished
Quick-release connector, can use various grips
All computerized operation, USB interface, conduct data analysis
Specification:
Capacity 10N, 20N, 50N, 100N, 200N, 500N, 1KN (can select double capacities preparation)
Display Computer display mode
Force Resolution 1/250,000
Force Accuracy ≤±0.5%
Stroke Resolution 0.005mm
Control Mode All computerized operation mode.
Test Stroke 500mm
Test Width Ø55mm
Test Speed 5~500mm/min, can set by computer, with up & down fast adjustment button of grips
Force Unit Switch Kgf, N, Ibf, g, ton, Mpa
Stop Mode Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function
Machine Dimension 40×30×70cm (W×D×H)
Machine Drive Stepper motor drive, synchronous wheel and precision ball screw drive
Power 180W
Machine Weight Approx 28kg
Power Supply 220V 50/60HZ 10A
Standard Device 1 set of grips, computer software, USB computer connection wire
Optional Personal computer


技术参数：

YL-1109拉力试验机|剥离试验机

主要特点功能：

全电脑操作，可进行拉力、压力、剥离、离型力、撕裂…等测试

可同时显示力量及位移

采用进口步进马达驱动,精密滚珠丝杆传动，电脑直接设定试验速度

上下微调开关，具测试完成后自动回位功能

快拆式接头,能使用各种不同之夹具

可连接打印机,输出报表，进行数据分析

机台详细规格
内容

机台容量
1、2、5、10、20、50、100kg

行程
500㎜

行程分辨率
5/1000mm

测试速度
5~500mm/min

力量解析
1/250,000

机台尺寸
40×30×70cm

空间
Ø55mm

机台重量
18kg

电压
AC 220V

标准配备
电脑软件

电压
100~240VAC

主要特点：

主要特点功能：

全电脑操作，可进行拉力、压力、剥离、离型力、撕裂…等测试

可同时显示力量及位移

采用进口步进马达驱动,精密滚珠丝杆传动，电脑直接设定试验速度

上下微调开关，具测试完成后自动回位功能

快拆式接头,能使用各种不同之夹具

可连接打印机,输出报表，进行数据分析