为您推荐相似的传感器/敏感元件
激光测径仪|直径测量仪ZM10X 是激光幕帘原理的测微计、千分尺，能低成本实现大量程外径轮廓测量，有多种型号，能达到0.3μm线性度，10KHZ采样频率。单个ZM10X独立最大可测98mm的物体直径，通过多传感器协同工作可测直径高达500mm（可根据实际情况，低成本定制更大外径型号）。ZM10X激光幕帘测径仪为检测物体外径提供了非常方便的测量方式。
主要特点：
1. 测量范围从 5 到 100 mm
2 高达 ±0.3 μm 的精度
3. 高达 10 000 Hz 的采样率
4. RS232/RS485/以太网+4...20 mA/0...10V
5. 自带远心镜头
6. 传感器相互同步（主从）：用于多轴测量任务
7. 可提供用于传感器参数化的软件
8. 免费SDK及实例
9. 有双轴、三轴和多轴可选
10. 气刀窗口保护
激光测径仪|直径测量仪ZM10X可用于非接触式测量和检查物体边缘的直径、间隙、位移/位置。
技术规格：
| ZM10x- | ZM100-25 | ZM100-50 | ZM100-75 | ZM100-100 | ZM105-5 | ZM105-10 | ZM105-25 | ZM105-50 | ZM105-75 | ZM105-100 | |
| Measurement range, mm | 25 | 50 | 75 | 100 | ±1х5 | ±3х10 | ±5х25 | ±7x50 | ±9x75 | ±10x100 | |
| Minimum size of the object, mm | 0,5 | 1 | 1,5 | 2 | 0,05(0,1) | 0,1(0,2) | 0,25(0,5) | 0,5(1) | 0,75(1,5) | 1(2) | |
| Accuracy* , um | ±5 | ±10 | ±15 | ±20 | ±0,3 | ±0,5 | ±1 | ±2 | ±3 | ±5 | |
| Measurement frequency, Hz | 500 | 500 | 500 | 500 | 500 | 2000 | 2000 | 2000 | 2000 | 2000 | |
| Light source | LED | ||||||||||
| Laser safety class | 1 (IEC60825-1) | ||||||||||
| Synchronization input | 2,4 – 5 V (CMOS, TTL) | ||||||||||
| Logic output | three outputs, NPN: 100 mA max; 40 V max | ||||||||||
| Power supply, V | 24 (9…36) | ||||||||||
| Power consumption, W | 1,5...2 | ||||||||||
| Housing materia | aluminum | ||||||||||
| Weight (without cable), gram | 600 | 2000 | 2600 | 4000 | 700 | 700 | 700 | 1600 | 3200 | 4500 | |
| Output interface | digital | RS232 (max. 921,6 kbit/s) or RS485 (max. 921,6 kbit/s) or Ethernet & (RS32 or RS485) | |||||||||
| analog | |||||||||||
* typical data obtained when a knife edge was used to interrupt the beam and distance between transmitter and receiver is equal of two measurement range
产品货期: 45天
整机质保期: 1年
培训服务: 额外提供免费培训
