Agilent 7000E 三重四极杆气质联用系统
Agilent 7000E 三重四极杆气质联用系统
Agilent 7000E 三重四极杆气质联用系统
Agilent 7000E 三重四极杆气质联用系统
Agilent 7000E 三重四极杆气质联用系统
Agilent 7000E 三重四极杆气质联用系统

面议

暂无评分

安捷伦

下载

7000E GC/MS

--

美洲

  • 钻石
  • 第23年
  • 生产商
  • 营业执照已审核
核心参数

仪器种类: 三重四极杆质谱

色谱类型: 常规气质

产地类别: 进口

质量范围: m/z 10-1050

灵敏度: Inert Plus EI 离子源 - 10 fg OFN 进样:IDL ≤ 4 fg* ; Hydro 惰性 EI 离子源 - 10 fg OFN 进样:IDL ≤ 8 fg **

扫描速度: ≤ 20000 Da/s

检测器: Agilent triple-axis HED-EM with extended-life EM and dynamically ramped iris

创新点

7000E GC/TQ 提供稳定、耐用、持续的性能,对于那些很可能与非惰性表面发生反应的活性化合物来说,Inert Plus Extractor EI 离子源可实现出众的分析灵敏度。专为涉及各个行业应用的常规实验室设计,为其带来出色的运行效率。 端到端智能诊断 :在每次调谐之前,GC/TQ 都会执行全方位的系统准备状态 检查,确保仪器在您准备操作时已经就绪。除了详细的系 统筛选和系统评估过程外,气相色谱智能识别功能还提供 方便的诊断和维护工具,包括提供分步指导的自引导维护 程序,可通过移动设备随时随地查看常见任务。 通过预防性监测大幅延长仪器正常运行时间 :意外的仪器问题及导致的停机时间会严重扰乱实验室运 营,当您不知道问题根源时尤其如此。7000E GC/TQ 可自行监测重要运行参数,通过早期维护反馈让您 实时了解系统的整体运行状况。 Hydro 惰性离子源,利用 H2 载气大幅提高效率 :克服使用氢气作为载气时面临的问题。氢气是一种低成本的可再生气体,是氦气的理想替代品。新型 Hydro 惰性离子源能够大大减少与使用 H2 相 关的灵敏度损失和光谱异常。Hydro 惰性离子源的一些独特优势包括:1.解决了氢化和脱氯反应等问题。 2.谱图保真度,即便对于非常容易氢化的化合物也是如此。3.高沸点物质出色的峰形,特别适用于 PAHs 。

新型 Agilent 7000E 三重四极杆气质联用系统具有经验证的智能性和可靠性,能够为您提供所需的答案。用于各种行业应用(如食品中的农药检测或环境样品中的 SVOC 分析等)的实验室常规主力仪器,现在有 SWARM 自动调谐和改进的诊断工具。Hydro 惰性离子源是针对使用氢气载气进行优化的新型离子源,可帮助您的实验室避免因不稳定的氦气供应链而造成的中断,同时克服与氢气相关的许多性能挑战。总之,这些功能可提供出众的性能、缩短仪器停机时间,并大幅提高样品通量。

使用适用于气相色谱三重四极杆的全自动 MassHunter Optimizer 可以轻松完成从 SIM、扫描或 MRM 数据开始的方法开发,以及从 Agilent 5975 或 5977 GC/MSD 实现方法迁移。使用新的数据采集模式,包括触发式 MRM、同步动态 MRM 和扫描 (dMRM/scan),您能够可靠地确认目标分析物,并随时执行回顾性分析,而无需重新进样。


特性:

  • 新型 Hydro 离子源可以轻松采用氢气作为载气,提高色谱分析性能,并有助于避免由于氦气短缺而导致的操作中断

  • 数据采集模式(如数据依赖型 tMRM 以及同步 dMRM 和扫描模式)可实现靶向筛查,并在单次运行中对数百种分析物进行可靠定量

  • 包含诊断功能的 SWARM 自动调谐速度是原来的两倍,结合 8890 和 Intuvo GC 的内置智能功能,通过集成触摸屏和浏览器界面改进了系统诊断并简化了多功能操作

  • JetClean 智氢洁离子源可以大幅减少甚至避免手动清洁离子源

  • 可加热镀金四极杆、三轴 HED-EM 检测器和快速排气功能可降低中性噪音并缩短仪器冷却时间,从而提高质谱仪的性能

  • Agilent MassHunter 软件不仅能简化工作流程,还能全面控制从调谐到数据分析和报告生成的整个过程

  • MassHunter Optimizer 软件可轻松将 GC/MSD 方法转移至 GC/TQ,并使用保留时间锁定软件可重现地在气相色谱系统之间转移方法

  • 内置技术控制功能与程序控制相结合可确保数据安全并控制访问,帮助您遵循 US FDA 21 CFR Part 11、欧盟附录 11 及类似的国家电子记录法规的要求

  • 安捷伦农药与环境污染物 4.0 数据库包含 1100 多种化合物,其中包括每种化合物的多个离子对以及 7500 多个基质优化的 MRM 离子对,有助于分析人员建立基质干扰更低的采集方法

  • 为了做出更明智、更具发展持续性的选择,安捷伦与 My Green Lab 合作,对 7000E GC/TQ 进行独立审计,确保满足归责性、一致性和透明度 (ACT) 标签的要求


性能指标:

GC/MSD 方法兼容性Yes

IDL 灵敏度

Inert Plus EI 离子源 - 10 fg OFN 进样:IDL ≤ 4 fg*


* 规格仅适用于在分流/不分流/MMI 模式下使用 He + 安捷伦校验色谱柱 + ALS 的全新气质联用系统

Hydro 惰性 EI 离子源 - 10 fg OFN 进样:IDL ≤ 8 fg **


** 规格仅适用于在分流/不分流/MMI 模式下使用 H2 + 安捷伦校验色谱柱 + ALS 的全新气质联用系统


JetClean 兼容性Yes

MRM 速率800 MRM transitions/s

QuickProbe 兼容性No

尺寸(宽 x 深 x 高)35 cm x 86 cm x 47 cm

扫描速度≤ 20000 Da/s

操作模式EI(标配)CI(选配)
最短 MRM 驻留时间0.5 ms

检测器Agilent triple-axis HED-EM with extended-life EM and dynamically ramped iris

离子源

InertPlus EI

HydroInert

CI

质量范围m/z 10-1050

软件平台MassHunter


工作原理:

专为氢气载气应用而设计的 Hydro 惰性离子源

氦气 (He) 是一种有限、昂贵的资源。相反,氢气 (H2) 是低成本的可再生气体,可作为 GC/MS 分析中氦气的理想替代品。新型 Agilent Hydro 惰性离子源可防止因 He 短缺而导致的运行中断,同时不影响谱图保真度,还可以避免与 H2 载气相关的不利源内化学反应。该离子源能够大大减少灵敏度损失,并提供高沸点物质出色的峰形,特别适用于 PAHs。示例展示了分析已知存在加氢反应问题的硝基苯。

1.jpg

  • 本文介绍了一种用于分析甜菜中 267 种农药的简便、高通量方法。该方法将 QuEChERS 样品前处理方法与 Agilent 7000 系列三重四极杆气质联用系统相结合,并通过基质匹配标样校准进行定量,以降低基质干扰引起的定量偏差。结果表明,该方法在 2–200 μg/kg 的基质加标浓度范围内具有良好的线性关系。绝大部分目标农药化合物的定量限 (LOQ) 低至2 μg/kg,灵敏度高。加标回收率测试表明,在 2、5、10、100 和 200 μg/kg 的加标浓度下,大部分农药化合物的回收率在 80%–120% 的范围内 (n = 5) ,且相对标准偏差 (RSD)低于 10%。该方法适用于对甜菜中的多种农药残留进行常规分析。

    食品/农产品 2024-05-13

  • 前言 高分辨气相色谱质谱 (GC/MS) 系统的重要应用包括非靶向筛查方法以及未知化合物鉴定。对于许多类别化合物,低能量电子电离 (EI) 相比标准 (70 eV) EI 显著提高了分子离子的相对丰度,可以提高选择性和化合物鉴定能力,避免了由于更换离子源或进一步调谐而导致的停机时间。但是,其他离子源仍可以作为补充技术(即化学电离)与高分辨 GC/MS 联用,主要用于环境分析中重要的选定化合物分析。本研究将比较在 Agilent 7250 GC/Q-TOF 上采集的低能量 EI 和化学电离 (CI) 数据。

    环保 2024-04-07

  • Abstract This application note illustrates a sensitive method used to analyze semivolatile organic compounds (SVOCs) on an Agilent 7000E triple quadrupole GC/MS system (GC/TQ). The use of GC/TQ instrumentation for analysis of SVOCs offers significant advantages. High selectivity afforded by multiple reaction monitoring (MRM) mode results in faster batch review and increased confidence due to the elimination of matrix interferences. These interferences are often present when using selective ion monitoring (SIM) or scan acquisition modes. Increased sensitivity can facilitate smaller extraction volumes that improve sustainability, reduce waste, and decrease costs associated with sample preparation, solvent usage, and waste disposal. A primary objective of this work was to demonstrate the ability of a GC/TQ to detect SVOCs at low levels to meet these laboratory needs while maintaining an excellent dynamic range.

    环保 2024-02-26

  • Using the Agilent HydroInert source in a challenging soil matrix

    环保 2024-02-26

  • 本文介绍了一种用于分析甜菜中 267 种农药的简便、高通量方法。该方法将 QuEChERS 样品前处理方法与 Agilent 7000 系列三重四极杆气质联用系统相结合,并通过基质匹配标样校准进行定量,以降低基质干扰引起的定量偏差。结果表明,该方法在 2–200 μg/kg 的基质加标浓度范围内具有良好的线性关系。绝大部分目标农药化合物的定量限 (LOQ) 低至2 μg/kg,灵敏度高。加标回收率测试表明,在 2、5、10、100 和 200 μg/kg 的加标浓度下,大部分农药化合物的回收率在 80%–120% 的范围内 (n = 5) ,且相对标准偏差 (RSD)低于 10%。该方法适用于对甜菜中的多种农药残留进行常规分析。

    食品/农产品 2024-05-13

  • Abstract This application note describes the use of the novel simultaneous dynamic multiple reaction monitoring (dMRM) and scan (dMRM/scan) data acquisition mode for triple quadrupole gas chromatography mass spectrometry (GC/TQ) analysis of pesticides in challenging food matrices. The simultaneous dMRM/scan capability enables identification of the unknown compounds and retrospective analysis, while maintaining sensitivity and dynamic range of the method comparable to a conventional dMRM analysis. Additionally, scan data enables more confidence in compound identification by library spectrum matching. Finally, the full scan data allow the analyst to evaluate the sample matrix to ensure the most efficient performance of the GC/TQ system. This work demonstrates the application of dMRM/scan to the analysis of extracts, using Agilent QuEChERS sample preparation, of spinach, walnut, and cayenne pepper spiked with over 200 pesticides. The calibration results and method sensitivity for 203 evaluated compounds were comparable to results observed with conventional dMRM data acquisition mode with the Agilent 8890/7000E GC/TQ and the Agilent 8890/7010C GC/TQ. The unknown identification workflow based on the spectral library matching using a retention time locked library was carried out with Agilent MassHunter Unknowns Analysis. Many of the compounds with the established maximum residue limits (MRLs) were identified with full scan data at concentrations below their MRLs even in the challenging cayenne pepper extract

    食品/农产品 2024-02-26

  • Abstract This application note describes two approaches for achieving robust, multiresidue pesticide analysis in 10 minutes by GC/MS/MS, while maintaining sufficient chromatographic resolution for the analysis of over 200 pesticides in spinach; a challenging high chlorophyll, fresh matrix. First, the conventional 15 × 15 m (0.25 mm × 0.25 μm) midcolumn backflush configuration was used with an accelerated oven ramp, yielding an analysis time of 10 minutes. Second, a minibore 10 × 10 m (0.18 mm × 0.18 μm) midcolumn backflush configuration was used, enabling a fast 10-minute analysis time. The latter method was precisely scaled using the Agilent GC method translation technique. It was shown that midcolumn backflushing enabled method robustness and extended maintenance-free operation of the system by minimizing column trimming and source cleaning. Results demonstrate that the Agilent 7000E and 7010C triple quadrupole GC/MS systems delivered excellent linearity over a concentration range of 0.1 to 1,000 parts per billion (ppb). Method robustness was shown with 700 consecutive injections of a spinach extract, spiked with pesticides at 20 ppb, that spanned over 175 hours of continuous running of the GC/TQ.

    食品/农产品 2024-02-26

  • Abstract This application note describes the key strategies for pesticide analysis with gas chromatography/triple quadrupole mass spectrometry (GC/TQ) using hydrogen as the carrier gas while maintaining sensitivity to meet maximum residue limits (MRLs). The key aspects addressed in this work include the recommended column configuration, the optimized injection conditions, and the appropriate choice of the mass spectrometer (MS) electron ionization (EI) source hardware developed for use with hydrogen carrier gas. The 20 m × 20 m (0.18 mm × 0.18 μm) Agilent HP-5ms UI midcolumn backflush configuration allowed for maintaining the same retention times as with helium, leading to time savings associated with method translation. The resulting chromatographic resolution achieved under the optimal conditions with hydrogen surpassed that with helium. The optimized injection conditions included solvent vent mode, a 2 mm dimpled liner, and the use of analyte protectants. The analyte response with hydrogen was enhanced on average 10-fold when using the optimized conditions compared to using hydrogen carrier gas with the injection conditions, commonly used with helium. Both the Agilent HydroInert and the Agilent High Efficiency Source (HES) resulted in nearly identical spectra bserved with hydrogen and helium, which allowed using the same multiple reaction monitoring (MRM) transitions and collision energies as with helium. The ability to use the same MRMs, collision energies, and retention times greatly simplified the transition from helium to hydrogen.

    食品/农产品 2024-02-26

  • 前言 高分辨气相色谱质谱 (GC/MS) 系统的重要应用包括非靶向筛查方法以及未知化合物鉴定。对于许多类别化合物,低能量电子电离 (EI) 相比标准 (70 eV) EI 显著提高了分子离子的相对丰度,可以提高选择性和化合物鉴定能力,避免了由于更换离子源或进一步调谐而导致的停机时间。但是,其他离子源仍可以作为补充技术(即化学电离)与高分辨 GC/MS 联用,主要用于环境分析中重要的选定化合物分析。本研究将比较在 Agilent 7250 GC/Q-TOF 上采集的低能量 EI 和化学电离 (CI) 数据。

    环保 2024-04-07

  • Abstract This application note illustrates a sensitive method used to analyze semivolatile organic compounds (SVOCs) on an Agilent 7000E triple quadrupole GC/MS system (GC/TQ). The use of GC/TQ instrumentation for analysis of SVOCs offers significant advantages. High selectivity afforded by multiple reaction monitoring (MRM) mode results in faster batch review and increased confidence due to the elimination of matrix interferences. These interferences are often present when using selective ion monitoring (SIM) or scan acquisition modes. Increased sensitivity can facilitate smaller extraction volumes that improve sustainability, reduce waste, and decrease costs associated with sample preparation, solvent usage, and waste disposal. A primary objective of this work was to demonstrate the ability of a GC/TQ to detect SVOCs at low levels to meet these laboratory needs while maintaining an excellent dynamic range.

    环保 2024-02-26

  • Using the Agilent HydroInert source in a challenging soil matrix

    环保 2024-02-26

  • 前言 全球结核病 (TB) 的发病率非常高,据估计仅 2014 一年中就有 960 万新增 TB病例,并有 150 万名患者死于 TB [1]。采用代谢组学技术可以确认 TB 生物标记物,使我们对该疾病的认识取得很大进展。本研究中利用结核分枝杆菌(Mtb) 感染的小鼠模型来确定未感染和已感染 TB 的肺组织的代谢情况。 为了确认感染后产生的新病理生理途径和 TB 生物标记物,使用未感染和已感染(感染第 9 周)的肺组织进行非靶向代谢组学研究。在初步化合物标注之后,使用低能量 EI 数据确认分子离子,并分别鉴定初步分析出的化合物 与未知物的分子式。

    生物产业 2024-04-07

售后服务承诺

保修期: /

是否可延长保修期:

现场技术咨询:

免费培训: -

免费仪器保养: -

保内维修承诺: -

报修承诺: -

  • 周转时间对实验室的声誉非常重要。但实验室每天都面临着不同的影响分析效率的难题,例如仪器停机时间、样品重新运行、数据审查。了解 Agilent 7000E 和 7010C 三重四极杆 GC/MS (GC/TQ)系统。7000E GC/TQ 提供稳定、耐用、持续的性能,而 7010C GC/TQ 专为需要极低检测限的分析而设计。二者均由新技术提供支持,可尽可能提高实验室生产力,使您能够专注推动实验室发展。

    5234MB 2022-08-16
用户评论
暂无评论
问商家

安捷伦气质联用仪7000E GC/MS的工作原理介绍

气质联用仪7000E GC/MS的使用方法?

安捷伦7000E GC/MS多少钱一台?

气质联用仪7000E GC/MS可以检测什么?

气质联用仪7000E GC/MS使用的注意事项?

安捷伦7000E GC/MS的说明书有吗?

安捷伦气质联用仪7000E GC/MS的操作规程有吗?

安捷伦气质联用仪7000E GC/MS报价含票含运吗?

安捷伦7000E GC/MS有现货吗?

Agilent 7000E 三重四极杆气质联用系统信息由安捷伦科技(中国)有限公司为您提供,如您想了解更多关于Agilent 7000E 三重四极杆气质联用系统报价、型号、参数等信息,欢迎来电或留言咨询。
移动端

仪器信息网App

返回顶部
仪器对比

最多添加5台