新一代制药专用湿法总有机碳仪

  multi EA S® 5000元素分析仪是德国耶拿公司2008年推出的用于分析各种气态、液态、LPG、固态样品中总氮、总碳、总硫、总氯含量的多元素专业分析系统。

    multi EA S® 5000元素分析仪采用双炉技术，将精湛的垂直炉技术与水平炉相结合，既可作垂直炉也可作水平炉。同一台仪器两种模式任选，即可针对各种样品基体采取最适合的燃烧模式。独特、新颖的双炉设计，使之在操作模式之间转换快捷方便，不再需要更换燃烧管，并具有自动识别模式位置和调整过程参数。

    multi EA S®5000专利的火焰传感器可实时监控样品的燃烧状态。控制进样速度，防止爆燃和积碳。保证燃烧的完整性和安全性，提高自动化程度。

    multi EA S®5000型元素分析仪，无论是测量液体、气体、LPG、固体样品，均可配备高性能的自动取样进样装置。
    * 液体自动进样器可控制进样体积，进样速度，和其他功能，各项参数可储存，方便以后使用。并且保证了分析结果的重复性。
    * 液体和固体样品可使用同一自动进样器，切换方便自如。
    * 气体自动进样装置，特殊设计可使进样完全不受外界温度影响，进样重复性非常理想。

技术参数：

    炉体设计：双炉设计

    检测器：氮—化学发光检测器；硫—紫外荧光检测器或微库仑检测器；氯—微库仑检测器；碳—NDIR

    测量范围：0.0x ppm—百分含量

    进样量：液体：1—100ul； 气体：最大100ml； 固体：最大100mg； LPG：1—50ul

    炉温：1100℃

主要特点：

    灵活方便的设计：分析的元素和相应的检测器均可选择。氮、硫、氯、碳分析的切换，只需在软件里选择，无需任何机械转换。

    多项专利技术：专利的双炉设计和专利的火焰传感器、专利的LPG进样器。集成更多的高科技成果，仪器更加现代化。

    重现性优良：拥有灵巧、免维护的垂直进样器以及特殊的垂直炉，确保了仪器优良的重现性。一次成型。安装后无须人工调节任何电子部件。气路加装了稳压系统，避免了气体压力的波动对测定的干扰，外界氧气压力在一定范围内（0.2-0.6MPa)波动，对测量没有影响；压力过低或过高都会报警。气路气密性检查十分方便。

    不同的测量范围可自动切换使用一条校正曲线可以测定所有浓度范围的样品。

    全智能化、自动化设计。仪器的所有参数均通过计算机优化设定、控制。

    带加热的过滤装置，使膜式干燥器和检测系统永久免维护。

analytikjena
Consumables multi EA 5000
effective from 01.01.2010
  Priority Order number Description
Consumables general
   402-889.527 Auto-Protection valve assembly, complete
no picture available
  B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces
   402-889.652 Flow test kit
no picture available
A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces
   402-007.513 FAST connector, 1 piece
(adaptor angeled for gas tubings, black)
   402-801.317 Fuse for furnace unit
T 10 A H, 20 mm
  402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece
   402-889.510 Multi purpose combustion tube
 
B 402-825.045 Tweezers, straight, truncated
 B 402-889.092 Sample vials, 2 ml, set of 100 pieces
(for sample rack with 112 positions)
   402-889.558 PTFE filter plate, d = 25 mm  (Auto protection replacement
filter)
Set of 5 pieces
   402-820.129 Oxygen and argon gas supply tubing
FEP, OD 6 mm (sold by meter), 1 m
 A 402-889.306 Screw cap with hole, GL 18
 
 
 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces
   402-889.583 Special sealing 12 mm
(FAST connector at outlet of multi purpose combustion tube)
   402-822.118 Heat resistent gloves, 1 pair
Sampling modules
MMS 5000
   402-812.374 Replacement screw
(mounting of autosampler on the basic unit/ ABD)
A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces
   402-886.248 Waste hose
 A 402-889.206 Septum for rinsing vessel
   402-889.533 Syringe 50 μl, with removable needle, without markings
  402-889.534 Syringe 100 μl, with removable needle, without markings   402-889.547 Gripper for sample boats
Autoinjector
   402-889.589 Syringe 10 μl, for Autoinjector, with removable needle
recommended for higher element concentrations and systems with carbon module
   402-889.592 Syringe 100 μl, for Autoinjector, with removable needle
   402-889.590 Syringe 20 μl, for Autoinjector, with removable needle
recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)
   402-889.591 Syringe 40 μl, for Autoinjector, with removable needle
recommended as standard syringe for N/S systems
 A 402-889.186 Removable special needles, set of 3 pieces
Manual Boat Drive - MBD
no picture
available
 402-815.839 Sealing for sample port MBD
   402-889.671 Feed  tube for MBD
   402-889.672 Hook for MBD
   402-889.670 MBD coupling tube, glass
   402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
  402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Automatic boat drive - ABD
   402-889.551 ABD coupling tube, glass
   402-886.236 Sealing for sample port ABD
 A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing
 A 402-889.073 Feed tube, for MVS shunt/ABD
 A 402-889.066 Hook, for MVS shunt/ABD
suitable from MVS serial number  509 046 and higher
 402-815.838 O-ring 14 mm x 4 mm for ABD
   402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
   402-889.560 Set of sealing elements horizontal
 A 402-889.050 Septum; 12.5 mm; set of 5 pieces
  402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
 A 402-889.039 Adsorption material, set of 3 pieces
Gas Sampling System - GSS
 B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece
   402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
   402-820.123 Ferrule for injection needle, vertical operation, 1 piece
 B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
no picture
available
  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
LPG Module and GSS/LPG combi module
   402-889.439 Bubble vessel
   402-820.057 Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
   402-820.123 Ferrule for injection needle, vertical operation, 1 piece
A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation mode
 A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
multi EA 5000: for bubble vessel
 A 402-881.116 O-ring, i.d. = 6 mm x 3 mm
multi EA 5000: for screw cap GL 14 bubble vessel
no picture
available
  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode
A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
Detection
Sulfur / nitrogen / carbon detection
no picture
available
   402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l
no picture
available
  402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l   B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank
  B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
 B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)
 B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank
 B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank
 B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)
A 402-823.048 Membrane dryer
B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces
multi EA 5000: sealing for inner part of membrane dryer
Sulfur Coulometer
 A 402-889.313 Absorber tube for  Sulfur coulometer, glass
   402-820.110 Connecting hose 1/8", (sold by meter), 1m
 A 402-889.302 Diaphragma for titration cell of Sulfur coulometer
 A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer
 A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer
 
 402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer
A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass
 A 402-520.137 Glass screw joint (gray)
multi EA 5000: (Screw joint for tube 8 mm)
 A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer
 A 402-889.303 Cathode  for titration cell of Sulfur coulometer
 A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer
  402-884.015 Packet with one charge of silver wool
A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer
 A 402-889.306 Screw cap with hole, GL 18
 
A 402-889.304 Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer
A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces
 402-889.300 Titration cell for Sulfur coulometer, glass
 A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer
TC/TOC-Module
B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
 B 402-885.019 Halogen absorber, complete with U-tube
  402-810.050 Halogen absorber filling (copper- and brass wool)
  A 402-885.017 High-temperature mat, set of 3 pieces
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
 
   402-889.657 Condensation coil
no picture available
  B 402-810.059 Special catalyst platinum, sufficient for 5 refills
A 402-810.048 Special catalyst platinum, one refill
B 402-886.318 Sample vials, 8 ml
50 mm x 18 mm, 125 pieces
 A 402-884.005 Pump hose for peristaltic pump, waste
 A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g
 A 402-825.044 Quartz wool, 1 packet
   402-889.659 Septum TIC vessel
no picture available
   402-889.658 Septum combustion tube
no picture available
   402-881.245 Set of TC prefilter and water trap
   402-889.594 Syringe 250 μl with vent and removable needle
(for autosampler)
   402-889.593 Syringe 500 μl with vent and removable needle
(for autosampler)
no picture
available
   402-889.656 TIC vessel
 A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber
(without connections)
no picture
available
   402-889.655 Combustion tube
Chlorine Detection
   402-815.831 Hose to connect suction extractor at workplace or vent
lengh 70 cm
   402-889.549 Connecting part (metal) for  gas transfer line
with outside thread
   402-825.123 Beaker for sulfuric acid vessel
   402-889.561 Replacement hose for heated gas transfer line
   402-820.053 Ferrule for connecting part (metal)
for gas transfer line with outside thread
   402-820.055 Ferrule for screw joint
gas transfer line with inside thread
   402-889.559 Gas transfer hose
no picture
available
no picture
available
B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
 B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)
 A 402-520.177 ferrule set,  1/4" TFE
   402-30003 Ferrule set,  1/8" PTFE
   402-825.124 Petri dish for sulfuric acid vessel
   402-889.569 Tubing inside sulfuric acid vessel with ferrule
   402-889.508 sulfuric acid vessel with outlet
   402-889.507 Safety cowl for the sulfuric acid tank
   402-825.108 Funnel for sulfuric acid vessel
   402-889.573 Connector sulfuric acid vessel
 A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE
Chlorine detection with chlorine module high sensitive
  B 402-890.007 Storage vessel for sensor electrode
 A 402-889.085 Mounting to connect suction extractor at workplace, NS
14.5 brown glass
   402-99998 preamplifier for sensor electrode
 A 402-889.123 Gas introduction tube
 A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7
 A 402-889.112 Internal electrolyte sensor electrode, 50 ml
 A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece
 A 402-889.006 Platinum electrode
A 402-889.184 Electrolyte bridge
B 402-889.110 Salt solution to make up 100 ml electrolyte
  A 402-889.002 Sensor electrode     402-889.536 Silver electrode
Chlorine detection with titration cells sensitive and high concentration
   402-889.538 Storage vessel for combination electrode
 B 402-880.605 Disposable tube 18 mm x 6 mm, filled
packet of 10 pieces, for AOX determination (column method)
  402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)
 A 402-880.211 Combination electrode (ceramic)
 A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece
  402-889.673 Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.